39 results (0,17012 seconds)

Show all filters

Brand

Colour

Show all

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Rustins Quick Dry Step & Tile Paint Gloss Red 1 litre RUSSTP1LQ

Rustins Quick Dry Step & Tile Paint Gloss Red 1 litre RUSSTP1LQ

Rustins Quick Dry Step & Tile Paint is a high-performance interior and exterior gloss paint for tiles, concrete and bricks. It is quick drying, hard-wearing and weather-resistant. Not recommended for use on glazed or quarry tiles. To apply, use a good quality brush. 2 coats are usually sufficient. Sand lightly between coats if needed. Do not apply outdoors if rain is imminent, and do not use below 10C. Drying time: Approx. 4-8 hoursRecoat: 6-8 hoursCoverage: 14m/L

GBP 18.39
1

Rustins Quick Dry Step & Tile Paint Gloss Black 1 litre RUSSTPBK1LQ

Rustins Quick Dry Step & Tile Paint Gloss Black 1 litre RUSSTPBK1LQ

Rustins Quick Dry Step & Tile Paint is a high-performance interior and exterior gloss paint for tiles, concrete and bricks. It is quick drying, hard-wearing and weather-resistant. Not recommended for use on glazed or quarry tiles. To apply, use a good quality brush. 2 coats are usually sufficient. Sand lightly between coats if needed. Do not apply outdoors if rain is imminent, and do not use below 10C. Drying time: Approx. 4-8 hoursRecoat: 6-8 hoursCoverage: 14m/L

GBP 18.39
1

Rustins Quick Dry Brick Tile Paint Matt Red 1 Litre

Rustins Quick Dry Brick Tile Paint Matt Red 1 Litre

Rustins Quick Dry Brick & Tile paint is a high-quality acrylic, matt red paint for use on all interior and exterior brickwork. It is pigmented with micronised red oxide to give a good opacity and good exterior durability. To apply, use a large brush and apply evenly, making sure all the surface area is covered. One coat is usually sufficient with a drying time of 30 minutes, depending on the temperature and humidity.Apply paint ideally at between 15 - 25C, do not apply if rain is imminent. Drying time: 30 minutesRecoat: 4 hoursCoverage: 14m/L

GBP 16.99
1

Rustins Quick Dry Red Oxide Metal Primer 1 litre RUSROMP1LQ

Rustins Quick Dry Red Oxide Metal Primer 1 litre RUSROMP1LQ

Rustins Quick Dry Red Oxide Primer can be used on all bare metal surfaces, interior and exterior. It is formulated with acrylic and special anti-corrosive pigments to prevent corrosion. Apply using a quality brush. One coat is normally sufficient, but second coat may be applied if required. The surface may be cleaned with a mild detergent solution or white spirit as necessary. Must be over painted with an undercoat before applying a top coat. Stir well before use. Dry time: Approx. 30 minutes, depending on temperature and humidity.Recoat: Approx. 4 hours.Coverage: 12-15m per 1 litre.

GBP 17.39
1

Rustins Quick Dry Stain Block & Multi Surface Primer 1 litre RUSQDSBP1L

Rustins Quick Dry Stain Block & Multi Surface Primer 1 litre RUSQDSBP1L

Rustins Quick Dry Stain Block & Multi Surface Primer is a water based, Matt white stain blocker for interior and exterior use, with excellent adhesion to wood, plaster and previously painted surfaces. It will seal all stains that may bleed through and discolour paint. As a primer, it provides excellent adhesion to ceramic tiles, glass, and melamine. When dry, it can be painted with any type of paint and undercoat. It can be applied over asphalt, bitumen, crayon, creosote, graffiti, nicotine, rust, soot, tannin and water stains.

GBP 17.99
1