77 results (0,16288 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

SAS RED219 Over Door Indicator Light with Sounder

SAS RED219 Over Door Indicator Light with Sounder

SAS RED219 Over Door Indicator Light with SounderUsed in conjunction with the door monitor this indicator light can be fitted above a controlled door to indicate when an alarm call has been made. These over door lights are fitted with a sounder to attract attention audibly as well as visuallyThe Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.

GBP 121.50
1

SAS NET219 Over Door Indicator Light with Mini Buzzer

SAS NET219 Over Door Indicator Light with Mini Buzzer

SAS NET219 Over Door Indicator Light with Mini BuzzerUsed in conjunction with the door monitor this indicator light can be fitted above a controlled door to indicate when an alarm call has been made. These over door lights are fitted with a sounder to attract attention audibly as well as visually.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 126.36
1

SAS NET210 Over Door Light Addressable Type

SAS NET210 Over Door Light Addressable Type

SAS NET210 Over Door Light Addressable TypeUseful as options these lights can be fitted outside each room to indicate that a call has been made. Staffs often find these useful in the rapid location of calls. The light pulses red to signal the type of call and green to show that the call is being attended to and also staff presence.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 115.84
1

SAS NET210R Over Door Light Addressable Type Voltage Free

SAS NET210R Over Door Light Addressable Type Voltage Free

SAS NET210ROver Door Light Addressable Type Voltage FreeOver door lights are usually fitted outside a room situated as the name suggests above the door. The device works in conjunction with the call point inside the room. Whenever its assigned call point is activated the over door light flashes the corresponding pattern for that alarm condition. They are used commonly for rapid obvious detection of an alarm condition as they can be seen down a corridor. A relay with dry contacts version is available to interface with other systems. Also there is a sounder version available these are usually used in conjunction with door monitors NET218. Each over door light can be configured to respond to up to eight addressable call points.Useful as options these lights can be fitted outside each room to indicate that a call has been made. Staffs often find these useful in the rapid location of calls. The light pulses red to signal the type of call and green to show that the call is being attended to and also staff presence.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 126.36
1

SAS RED210R Overdoor Indicator Light with Volt Free Relay Contacts Rated at 1A 12Vd.c

SAS RED210R Overdoor Indicator Light with Volt Free Relay Contacts Rated at 1A 12Vd.c

SAS RED210R Overdoor Indicator Light with Volt Free Relay Contacts Rated at 1A 12Vd.cSimilar to the over door indicator light it can be activated by up to eight alarm points. The voltage free contacts provided can be used to activate other systems for example to lock or unlock emergency exit doors set off a strobe light or active a nearby CCTV camera.The Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.

GBP 121.50
1

SAS NET205 Patient Call Unit with Alarm amp Crash Call Facilities Magnetic Key Reset

SAS NET205 Patient Call Unit with Alarm amp Crash Call Facilities Magnetic Key Reset

SAS NET205 Patient Call Unit with Alarm Crash Call Facilities Magnetic Key ResetThe NET205 has the same features and functions as the NET205M above with the staff operations on this call unit controlled by a magnetic key NET216.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 115.84
1

SAS NET206 Push To Call Lead 2.5m Long

SAS NET206 Push To Call Lead 2.5m Long

SAS NET206 Push To Call Lead 2.5m LongThe NET206 is designed to plug into our range of nurse call units. It comes equipped with a sturdy lead 2.5 metres long with moulded jack plug and cable strain. A large orange button is provided for the patient to press with a finger or even the palm of their hand.If the lead is accidentally pulled away from the nurse call point a call will be made to draw the fact to the attention of the carer. The lead is shown in its wall mounted holster that can be provided so the lead can be stored safely and neatly when not in use.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 19.44
1

SAS NET205ISO Patient Call Unit with Magnetic Reset and Alarm and Crash Call Facilities

SAS NET205ISO Patient Call Unit with Magnetic Reset and Alarm and Crash Call Facilities

SAS NET205ISO Patient Call Unit with Magnetic Reset and Alarm and Crash Call FacilitiesThe NET205 has the same features and functions as the NET205M with the staff operations on this call unit controlled by a magnetic key NET216.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.Key FeaturesMagnetic ResetAlarm Crash Call Facilities

GBP 136.90
1

SAS RED2096RF Radio Curo Reset Unit

SAS RED2096RF Radio Curo Reset Unit

SAS RED2096RF Radio Curo Reset UnitThe RED2096RF is a Radio Curo Reset Unit.This transmitter is used to cancel the alarm calls at their origin. This important feature means that all calls must be dealt with by visiting the source of the activation. The person carrying this transmitter always has the option of pulling it away from its clothing clip and activating an urgent alarm call. The same function and battery tests are in-built as the alarm transmitter above for peace of mind.

GBP 153.90
1

SAS RED236 Hand Held Infrared Programming Unit

SAS RED236 Hand Held Infrared Programming Unit

SAS RED236 Hand Held Infrared Programming UnitThe RED236 is an essential tool during commissioning. It is used to programme the infra-red call points with their unique address number and the text description room name of the sensor. The information is entered into the programmer it is then pointed at the infra-red sensor an infra-red link transfers the data. This makes changes of room names at a later date very easy.The Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.

GBP 186.30
1

SAS Caring Technology Touch-Wireless-CP Touch Wireless Call Point with Call Level No Reset

SAS Caring Technology Touch-Wireless-CP Touch Wireless Call Point with Call Level No Reset

SAS Caring Technology Touch-Wireless-CP Touch Wireless Call Point with CallLevel No ResetDesigned for challenging environments. The room unitmanufactured from injection molded Tritan Tx more resilient thanPolycarbonate is low profile and vandal resistant. The unit is touch buttonactuated and any of the above configuration of active buttons can be achieved.The patient touches the area denoted by the orange paddle to activate a patientcall. The hidden LED in the centre of the call point illuminates red when thebuttons are touched. A low battery warning will sound when the battery is low.Upon detection of a low battery a CALL signal is sent out this will not besent again until the battery has been changed. While the room units battery islow it will continue to flash its red LED every 15 seconds and sound its buzzerevery 2 minutes. Staff should be made aware of this. The buttons in the framestaff only can be used by the nurse to reset the call. Included 2x torx M3.5x 25mm security screws 3 x AAA batteries surface back box optionalThe wireless call points are a cost-effectiveapproach to add nurse call to an existing staff attack system. This helps keepdisruption to a minimum since no walls need to be chased and are easilyinstalled with an anti-ligature surface collar. The slave wireless call pointsyncs with a master IR receiver which is addressed to understand its location.

GBP 186.30
1

SAS Caring Technology Touch-Wireless-CP-R Touch Wireless Call Point with Call Reset Reset And Test Levels

SAS Caring Technology Touch-Wireless-CP-R Touch Wireless Call Point with Call Reset Reset And Test Levels

SAS Caring Technology Touch-Wireless-CP-R Touch Wireless Call Point with Call Reset Reset And Test LevelsDesigned for challenging environments. The room unit manufactured from injection molded Tritan Tx more resilient than Polycarbonate is low profile and vandal resistant. The unit is touch button actuated and any of the above configuration of active buttons can be achieved. The patient touches the area denoted by the orange paddle to activate a patient call. The hidden LED in the centre of the call point illuminates red when the buttons are touched. A low battery warning will sound when the battery is low. Upon detection of a low battery a CALL signal is sent out this will not be sent again until the battery has been changed. While the room units battery is low it will continue to flash its red LED every 15 seconds and sound its buzzer every 2 minutes. Staff should be made aware of this. The buttons in the frame staff only can be used by the nurse to reset the call. Included 2x torx M3.5 x 25mm security screws 3 x AAA batteries surface back box optionalThe wireless call points are a cost effective approach to add nurse call to an existing staff attack system. This helps keep disruption to a minimum since no walls need to be chased and are easily installed with an anti-ligature surface collar. The slave wireless call point syncs with a master IR receiver which is addressed to understand its location.LED FunctionGreen Battery goodYellow Battery should be changedRed Change battery nowPlease note The image is for illustrative purposes only.

GBP 186.30
1

SAS Caring Technology Touch-Wireless-CP-RU Touch Wireless Call Point with Call Reset Crash And Alarm Levels

SAS Caring Technology Touch-Wireless-CP-RU Touch Wireless Call Point with Call Reset Crash And Alarm Levels

SAS Caring Technology Touch-Wireless-CP-RU Touch Wireless Call Point with Call Reset Crash And Alarm LevelsDesigned for challenging environments. The room unit manufactured from injection molded Tritan Tx more resilient than Polycarbonate is low profile and vandal resistant. The unit is touch button actuated and any of the above configuration of active buttons can be achieved. The patient touches the area denoted by the orange paddle to activate a patient call. The hidden LED in the centre of the call point illuminates red when the buttons are touched. A low battery warning will sound when the battery is low. Upon detection of a low battery a CALL signal is sent out this will not be sent again until the battery has been changed. While the room units battery is low it will continue to flash its red LED every 15 seconds and sound its buzzer every 2 minutes. Staff should be made aware of this. The buttons in the frame staff only can be used by the nurse to reset the call. Included 2x torx M3.5 x 25mm security screws 3 x AAA batteries surface back box optionalThe wireless call points are a cost effective approach to add nurse call to an existing staff attack system. This helps keep disruption to a minimum since no walls need to be chased and are easily installed with an anti-ligature surface collar. The slave wireless call point syncs with a master IR receiver which is addressed to understand its location.LED FunctionGreen Battery goodYellow Battery should be changedRed Change battery nowPlease note The image is for illustrative purposes only.

GBP 202.50
1

SAS Caring Technology Touch-Wireless-CP-ATT Touch Wireless Call Point with Attack Level No Reset

SAS Caring Technology Touch-Wireless-CP-ATT Touch Wireless Call Point with Attack Level No Reset

SAS Caring Technology Touch-Wireless-CP-ATT Touch Wireless Call Point with Attack Level No ResetDesigned for challenging environments. The room unit manufactured from injection molded Tritan Tx more resilient than Polycarbonate is low profile and vandal resistant. The unit is touch button actuated and any of the above configuration of active buttons can be achieved. The patient touches the area denoted by the orange paddle to activate a patient call. The hidden LED in the centre of the call point illuminates red when the buttons are touched. A low battery warning will sound when the battery is low. Upon detection of a low battery a CALL signal is sent out this will not be sent again until the battery has been changed. While the room units battery is low it will continue to flash its red LED every 15 seconds and sound its buzzer every 2 minutes. Staff should be made aware of this. The buttons in the frame staff only can be used by the nurse to reset the call. Included 2x torx M3.5 x 25mm security screws 3 x AAA batteries surface back box optionalThe wireless call points are a cost effective approach to add nurse call to an existing staff attack system. This helps keep disruption to a minimum since no walls need to be chased and are easily installed with an anti-ligature surface collar. The slave wireless call point syncs with a master IR receiver which is addressed to understand its location.LED FunctionGreen Battery goodYellow Battery should be changedRed Change battery nowPlease note The image is for illustrative purposes only.

GBP 186.30
1

SAS NET212 Extension Sounder Card

SAS NET212 Extension Sounder Card

SAS NET212 Extension Sounder CardThis extension sounder is used to mimic the indicator panel call tones. They provide a cost effective way of providing an alarm sound in areas where indicator panels are not required. The tones generated are louder than those from the range of indicator panels.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 168.48
1

SAS NET228 Pager Transmitter Alphanumeric Type

SAS NET228 Pager Transmitter Alphanumeric Type

SAS NET228 Pager Transmitter Alphanumeric TypeAlphanumeric paging transmitter used in conjunction with the NET229 pocket pagers. The pager is used to send text messages to the staff showing them the precise location where assistance is required. It can be configured to work as an on-site paging system with connections to a PC or telephone system. It is supplied with RS232 interface unit connection lead and wave aerial.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 1296.00
1

SAS ReconRED208 Reconditioned RED208 Infrared Unit

SAS ReconRED208 Reconditioned RED208 Infrared Unit

SAS ReconRED208 Reconditioned RED208 Infrared UnitThe ReconRED208 is a Reconditioned RED208 Infrared Unit.Carried by staff in establishments where they may feel at risk of an attack or who might need to call for urgent assistance. An alarm button is used to unobtrusively activate an alarm call on the nearest infra-red sensor. Pulling the transmitter away from its clothing clip activates an attack call. The unit is battery operated and it is easily replaced by the user. IA button is provided to check the battery health indicated by an LED array on the transmitter furthermore the nearest infra-red sensors reassurance light will flash to confirm a healthy signal. This is a confidence inspiring feature for the user who can quickly test the transmitter and sensors function in an environment when dealing with a potentially serious situation. All transmitters have a serial number and the facility to personalise the label.The Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.

GBP 64.80
1