16.937 results (0,23028 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

10x Sandvik Coromant 880-0906W10H-P-LM Insert Grade 4344

10x Sandvik Coromant 880-0906W10H-P-LM Insert Grade 4344

CoroDrill 880 P LM geometry is the best choice for long chipping materials, e.g. low carbon steel and stainless steels. These medium feed inserts are manufactured from a hard carbide substrate and feature a PVD TiAlN coating with sharp positive edge. Features and Benefits Manufactured from a hard carbide substrate for toughness PVD TiAlN coating reduces wear due to heat and friction Sharp positive edge for improved cutting performance Typical Applications Drilling Medium feeds

GBP 239.90
1

Sandvik Coromant CoroMill 326 Solid Carbide End Mill for Thread Milling A326R08-M25050VM-TH1025

Sandvik Coromant CoroMill 326 Solid Carbide End Mill for Thread Milling A326R08-M25050VM-TH1025

Product Range: CoroMill 326Tool Type: Thread millingVersatile and cost efficient, this miniature milling cutter benefits from three cutting edges for internal threading and chamfering. Use it in small holes, down to 6 mm (0.236 inch) as a complement to CoroMill 327, CoroMill 328 and CoroMill Plura.Features & Benefits- Internal threading and chamfering in small holes- Very high precision and low cutting forces- One grade for all materialsApplication- Internal thread milling- Chamfer milling- Hole diameters from 6 mm (0.236 inch)

GBP 129.99
1

Sandvik Coromant 326R08-B3502012-CH 1025 End Mill

Sandvik Coromant 326R08-B3502012-CH 1025 End Mill

Product Range: CoroMill 326Tool Type: Thread millingVersatile and cost efficient, this miniature milling cutter benefits from three cutting edges for internal threading and chamfering. Use it in small holes, down to 6 mm (0.236 inch) as a complement to CoroMill 327, CoroMill 328 and CoroMill Plura.Features & Benefits- Internal threading and chamfering in small holes- Very high precision and low cutting forces- One grade for all materialsApplication- Internal thread milling- Chamfer milling- Hole diameters from 6 mm (0.236 inch)

GBP 79.99
1

Sandvik Coromant CoroMill 326 Solid Carbide End Mill for Chamfer Milling A326R06-M2502006-CH1025

Sandvik Coromant CoroMill 326 Solid Carbide End Mill for Chamfer Milling A326R06-M2502006-CH1025

Product Range: CoroMill 326Tool Type: Thread millingVersatile and cost efficient, this miniature milling cutter benefits from three cutting edges for internal threading and chamfering. Use it in small holes, down to 6 mm (0.236 inch) as a complement to CoroMill 327, CoroMill 328 and CoroMill Plura.Features & Benefits- Internal threading and chamfering in small holes- Very high precision and low cutting forces- One grade for all materialsApplication- Internal thread milling- Chamfer milling- Hole diameters from 6 mm (0.236 inch)

GBP 109.99
1

Sandvik Coromant 326R08-B25050VM-TH 1025 End Mill

Sandvik Coromant 326R08-B25050VM-TH 1025 End Mill

Product Range: CoroMill 326Tool Type: Thread millingVersatile and cost efficient, this miniature milling cutter benefits from three cutting edges for internal threading and chamfering. Use it in small holes, down to 6 mm (0.236 inch) as a complement to CoroMill 327, CoroMill 328 and CoroMill Plura.Features & Benefits- Internal threading and chamfering in small holes- Very high precision and low cutting forces- One grade for all materialsApplication- Internal thread milling- Chamfer milling- Hole diameters from 6 mm (0.236 inch)

GBP 71.99
1

2x Sandvik Coromant 326R06-B15050VM-TH 1025 End Mill

2x Sandvik Coromant 326R06-B15050VM-TH 1025 End Mill

Product Range: CoroMill 326Tool Type: Thread millingVersatile and cost efficient, this miniature milling cutter benefits from three cutting edges for internal threading and chamfering. Use it in small holes, down to 6 mm (0.236 inch) as a complement to CoroMill 327, CoroMill 328 and CoroMill Plura.Features & Benefits- Internal threading and chamfering in small holes- Very high precision and low cutting forces- One grade for all materialsApplication- Internal thread milling- Chamfer milling- Hole diameters from 6 mm (0.236 inch)

GBP 107.98
1

Sandvik Coromant 326R08-B2502012-CH 1025 End Mill

Sandvik Coromant 326R08-B2502012-CH 1025 End Mill

Product Range: CoroMill 326Tool Type: Thread millingVersatile and cost efficient, this miniature milling cutter benefits from three cutting edges for internal threading and chamfering. Use it in small holes, down to 6 mm (0.236 inch) as a complement to CoroMill 327, CoroMill 328 and CoroMill Plura.Features & Benefits- Internal threading and chamfering in small holes- Very high precision and low cutting forces- One grade for all materialsApplication- Internal thread milling- Chamfer milling- Hole diameters from 6 mm (0.236 inch)

GBP 99.99
1

2x Sandvik Coromant 326R06-B1502006-CH 1025 End Mill

2x Sandvik Coromant 326R06-B1502006-CH 1025 End Mill

Product Range: CoroMill 326Tool Type: Thread millingVersatile and cost efficient, this miniature milling cutter benefits from three cutting edges for internal threading and chamfering. Use it in small holes, down to 6 mm (0.236 inch) as a complement to CoroMill 327, CoroMill 328 and CoroMill Plura.Features & Benefits- Internal threading and chamfering in small holes- Very high precision and low cutting forces- One grade for all materialsApplication- Internal thread milling- Chamfer milling- Hole diameters from 6 mm (0.236 inch)

GBP 99.98
1

Sandvik Coromant CoroMill 326 Solid Carbide End Mill for Chamfer Milling A326R08-M3502012-CH1025

Sandvik Coromant CoroMill 326 Solid Carbide End Mill for Chamfer Milling A326R08-M3502012-CH1025

Product Range: CoroMill 326Tool Type: Thread millingVersatile and cost efficient, this miniature milling cutter benefits from three cutting edges for internal threading and chamfering. Use it in small holes, down to 6 mm (0.236 inch) as a complement to CoroMill 327, CoroMill 328 and CoroMill Plura.Features & Benefits- Internal threading and chamfering in small holes- Very high precision and low cutting forces- One grade for all materialsApplication- Internal thread milling- Chamfer milling- Hole diameters from 6 mm (0.236 inch)

GBP 139.99
1

Sandvik Coromant CoroMill 326 Solid Carbide End Mill for Chamfer Milling 326R06-B2502006-CH1025

Sandvik Coromant CoroMill 326 Solid Carbide End Mill for Chamfer Milling 326R06-B2502006-CH1025

Product Range: CoroMill 326Tool Type: Thread millingVersatile and cost efficient, this miniature milling cutter benefits from three cutting edges for internal threading and chamfering. Use it in small holes, down to 6 mm (0.236 inch) as a complement to CoroMill 327, CoroMill 328 and CoroMill Plura.Features & Benefits- Internal threading and chamfering in small holes- Very high precision and low cutting forces- One grade for all materialsApplication- Internal thread milling- Chamfer milling- Hole diameters from 6 mm (0.236 inch)

GBP 109.99
1

Sandvik Coromant CoroMill 326 Solid Carbide End Mill for Thread Milling A326R08-M25100VM-TH1025

Sandvik Coromant CoroMill 326 Solid Carbide End Mill for Thread Milling A326R08-M25100VM-TH1025

Product Range: CoroMill 326Tool Type: Thread millingVersatile and cost efficient, this miniature milling cutter benefits from three cutting edges for internal threading and chamfering. Use it in small holes, down to 6 mm (0.236 inch) as a complement to CoroMill 327, CoroMill 328 and CoroMill Plura.Features & Benefits- Internal threading and chamfering in small holes- Very high precision and low cutting forces- One grade for all materialsApplication- Internal thread milling- Chamfer milling- Hole diameters from 6 mm (0.236 inch)

GBP 129.99
1

Sandvik Coromant CoroMill 326 Solid Carbide End Mill for Chamfer Milling A326R08-M2502012-CH1025

Sandvik Coromant CoroMill 326 Solid Carbide End Mill for Chamfer Milling A326R08-M2502012-CH1025

Product Range: CoroMill 326Tool Type: Thread millingVersatile and cost efficient, this miniature milling cutter benefits from three cutting edges for internal threading and chamfering. Use it in small holes, down to 6 mm (0.236 inch) as a complement to CoroMill 327, CoroMill 328 and CoroMill Plura.Features & Benefits- Internal threading and chamfering in small holes- Very high precision and low cutting forces- One grade for all materialsApplication- Internal thread milling- Chamfer milling- Hole diameters from 6 mm (0.236 inch)

GBP 139.99
1

Sandvik Coromant CoroMill 326 Solid Carbide End Mill for Thread Milling A326R06-M15050VM-TH1025

Sandvik Coromant CoroMill 326 Solid Carbide End Mill for Thread Milling A326R06-M15050VM-TH1025

Product Range: CoroMill 326Tool Type: Thread millingVersatile and cost efficient, this miniature milling cutter benefits from three cutting edges for internal threading and chamfering. Use it in small holes, down to 6 mm (0.236 inch) as a complement to CoroMill 327, CoroMill 328 and CoroMill Plura.Features & Benefits- Internal threading and chamfering in small holes- Very high precision and low cutting forces- One grade for all materialsApplication- Internal thread milling- Chamfer milling- Hole diameters from 6 mm (0.236 inch)

GBP 92.99
1

Sandvik Coromant CoroMill 326 Solid Carbide End Mill for Chamfer Milling A326R06-M1502006-CH1025

Sandvik Coromant CoroMill 326 Solid Carbide End Mill for Chamfer Milling A326R06-M1502006-CH1025

Product Range: CoroMill 326Tool Type: Thread millingVersatile and cost efficient, this miniature milling cutter benefits from three cutting edges for internal threading and chamfering. Use it in small holes, down to 6 mm (0.236 inch) as a complement to CoroMill 327, CoroMill 328 and CoroMill Plura.Features & Benefits- Internal threading and chamfering in small holes- Very high precision and low cutting forces- One grade for all materialsApplication- Internal thread milling- Chamfer milling- Hole diameters from 6 mm (0.236 inch)

GBP 89.99
1

Sandvik Coromant R390-11T308M-PM Insert Grade 4330

Sandvik Coromant R390-11T308M-PM Insert Grade 4330

This CoroMill 390 milling insert is manufactured from grade 4330 carbide and finished with a TiCN, Al2O3 and TiN coating. Suited for millng steel and cast iron, the insert boasts a light cutting geometry. Features and Benefits Part of the CoroMill 390 series which has a through coolant system and a light cutting geometry Finished with a TiCN, Al2O3 and TiN coating for durability Manufactured from grade 4330 carbide for strength Typical Applications Suited for use when milling steel and cast iron

GBP 17.99
1

Sandvik Coromant SNMG 120412-MR Insert Grade 4335

Sandvik Coromant SNMG 120412-MR Insert Grade 4335

This range of T-Max P SNMG turning inserts are square in shape and manufactured from grade 4335 carbide. Finished with a Al2O3+TiCN+TiN coating, the turning inserts are available in a variety of sizes and specifications to suit your needs. Features and Benefits Al2O3+TiCN+TiN coating for bolstered longevity Manufactured from grade 4335 carbide for resilience Part of the T-Max P range that ensures high chip control and an excellent surface finish Available in an array of sizes and specifications to suit your needs Typical Applications Suited primarily for use on steels

GBP 13.29
2

Sandvik Coromant SNMG 120408-MR Insert Grade 4335

Sandvik Coromant SNMG 120408-MR Insert Grade 4335

This range of T-Max P SNMG turning inserts are square in shape and manufactured from grade 4335 carbide. Finished with a Al2O3+TiCN+TiN coating, the turning inserts are available in a variety of sizes and specifications to suit your needs. Features and Benefits Al2O3+TiCN+TiN coating for bolstered longevity Manufactured from grade 4335 carbide for resilience Part of the T-Max P range that ensures high chip control and an excellent surface finish Available in an array of sizes and specifications to suit your needs Typical Applications Suited primarily for use on steels

GBP 13.29
2

Sandvik Coromant SNMG 120408-PM Insert Grade 4335

Sandvik Coromant SNMG 120408-PM Insert Grade 4335

This range of T-Max P SNMG turning inserts are square in shape and manufactured from grade 4335 carbide. Finished with a Al2O3+TiCN+TiN coating, the turning inserts are available in a variety of sizes and specifications to suit your needs. Features and Benefits Al2O3+TiCN+TiN coating for bolstered longevity Manufactured from grade 4335 carbide for resilience Part of the T-Max P range that ensures high chip control and an excellent surface finish Available in an array of sizes and specifications to suit your needs Typical Applications Suited primarily for use on steels

GBP 13.39
2

Sandvik Coromant SNMG 120404-PM Insert Grade 4335

Sandvik Coromant SNMG 120404-PM Insert Grade 4335

This range of T-Max P SNMG turning inserts are square in shape and manufactured from grade 4335 carbide. Finished with a Al2O3+TiCN+TiN coating, the turning inserts are available in a variety of sizes and specifications to suit your needs. Features and Benefits Al2O3+TiCN+TiN coating for bolstered longevity Manufactured from grade 4335 carbide for resilience Part of the T-Max P range that ensures high chip control and an excellent surface finish Available in an array of sizes and specifications to suit your needs Typical Applications Suited primarily for use on steels

GBP 13.39
2

Sandvik Coromant SNMG 090308-QM Insert Grade 4335

Sandvik Coromant SNMG 090308-QM Insert Grade 4335

This range of T-Max P SNMG turning inserts are square in shape and manufactured from grade 4335 carbide. Finished with a Al2O3+TiCN+TiN coating, the turning inserts are available in a variety of sizes and specifications to suit your needs. Features and Benefits Al2O3+TiCN+TiN coating for bolstered longevity Manufactured from grade 4335 carbide for resilience Part of the T-Max P range that ensures high chip control and an excellent surface finish Available in an array of sizes and specifications to suit your needs Typical Applications Suited primarily for use on steels

GBP 8.99
2

Sandvik Coromant SNMG 120412-MF Insert Grade 4335

Sandvik Coromant SNMG 120412-MF Insert Grade 4335

This range of T-Max P SNMG turning inserts are square in shape and manufactured from grade 4335 carbide. Finished with a Al2O3+TiCN+TiN coating, the turning inserts are available in a variety of sizes and specifications to suit your needs. Features and Benefits Al2O3+TiCN+TiN coating for bolstered longevity Manufactured from grade 4335 carbide for resilience Part of the T-Max P range that ensures high chip control and an excellent surface finish Available in an array of sizes and specifications to suit your needs Typical Applications Suited primarily for use on steels

GBP 13.29
2

10x Sandvik Coromant N123K2-0600-0008-TM Insert GRADE4325

10x Sandvik Coromant N123K2-0600-0008-TM Insert GRADE4325

Part of the CoroCut 1-2 range, these inserts are designed for use when profiling and turning. Manufactured from grade 4325 carbide and finished with an Al2O3, TiCN and TiN coating, the inserts are designed for use on steels and cast iron. Features and Benefits Part of the CoroCut 1-2 series that ensures secure and efficient machining Manufactured from grade 4325 carbide for resilience Finished with an Al2O3, TiN and TiCN coating for superior longevity Available in varying specifications to suit your needs Typical Applications Suited for use on steels as well as cast iron

GBP 429.90
1

Sandvik Coromant SNMG 120408-PR Insert Grade 4335

Sandvik Coromant SNMG 120408-PR Insert Grade 4335

This range of T-Max P SNMG turning inserts are square in shape and manufactured from grade 4335 carbide. Finished with a Al2O3+TiCN+TiN coating, the turning inserts are available in a variety of sizes and specifications to suit your needs. Features and Benefits Al2O3+TiCN+TiN coating for bolstered longevity Manufactured from grade 4335 carbide for resilience Part of the T-Max P range that ensures high chip control and an excellent surface finish Available in an array of sizes and specifications to suit your needs Typical Applications Suited primarily for use on steels

GBP 13.29
2

Sandvik Coromant SNMG 090304-PM Insert Grade 4335

Sandvik Coromant SNMG 090304-PM Insert Grade 4335

This range of T-Max P SNMG turning inserts are square in shape and manufactured from grade 4335 carbide. Finished with a Al2O3+TiCN+TiN coating, the turning inserts are available in a variety of sizes and specifications to suit your needs. Features and Benefits Al2O3+TiCN+TiN coating for bolstered longevity Manufactured from grade 4335 carbide for resilience Part of the T-Max P range that ensures high chip control and an excellent surface finish Available in an array of sizes and specifications to suit your needs Typical Applications Suited primarily for use on steels

GBP 8.99
2

Sandvik Coromant SNMG 120408-QM Insert Grade 4335

Sandvik Coromant SNMG 120408-QM Insert Grade 4335

This range of T-Max P SNMG turning inserts are square in shape and manufactured from grade 4335 carbide. Finished with a Al2O3+TiCN+TiN coating, the turning inserts are available in a variety of sizes and specifications to suit your needs. Features and Benefits Al2O3+TiCN+TiN coating for bolstered longevity Manufactured from grade 4335 carbide for resilience Part of the T-Max P range that ensures high chip control and an excellent surface finish Available in an array of sizes and specifications to suit your needs Typical Applications Suited primarily for use on steels

GBP 13.99
2