ProfitSpring | B2B PPC Agency

Sealey Diesel High Pressure Pump Test Kit

Essential tool for accurately measuring the high pressure fuel circuit of diesel common rail systems. Features 2,000bar gauge, pressure relief valve and high pressure flexible hoses. The kit also includes a set of dummy pump regulator and injector pipe blanks. Kit allows for a variety of tests to be conducted: - Engine cranking/running pressure test - Maximum pump pressure test - Pump pressure regulator test - Injector leakage test

GBP 1139.99

1

Sealey VS216 Diesel High Pressure Pump Test Kit

Essential tool for accurately measuring the high pressure fuel circuit of diesel common rail systems. Features 2,000bar gauge, pressure relief valve and high pressure flexible hoses. The kit also includes a set of dummy pump regulator and injector pipe blanks. Kit allows for a variety of tests to be conducted: - Engine cranking/running pressure test - Maximum pump pressure test - Pump pressure regulator test - Injector leakage test.

GBP 1210.40

1

Sealey Fuel Injection Pressure Test Kit

Comprehensive kit of adaptors and fittings for modern petrol fuel injection systems. Components fitted with quick coupling system and safety valve to prevent inadvertent discharge of fuel under pressure. Supplied with large high pressure gauge reading 0-145psi and 0-1000kPa and a small low pressure gauge for accurate low pressure readings. Pressure release valve fitted with long drain hose allows safe recovery of fuel. Supplied in storage case.

GBP 439.99

1

Sealey Diesel Engine Compression Test Kit - Master

The extensive range of glow plug and injector adaptors enable this kit to cover the vast majority of car, van, truck, bus, agricultural and marine diesel engines. Supplied in storage case with preformed liner and foam filled lid.

GBP 849.99

2

Sealey Headlamp Beam Setter with Rails & Commercial Aiming Screen

DVSA Approved for use in testing stations. Classes: I, II, III, IV, V, VI, VII, HGV. Suitable for all types of motorcycles, cars, light commercial, PSV & commercial vehicles. Fixed aiming screen. Internal analogue LUX meter for accurate light intensity measurement. Supplied with rails, instructions and certificate of approval. Only suitable for MOT test stations that are also class VI and HGV certified.

GBP 1599.99

2

Sealey SA200T Air Compressor Tank Vertical 200L

Compressed air receiver manufactured to meet Pressure Vessel Directive and supplied with test certificate. Includes fitting kit, safety valve, gauge and drain valve (hose not included). Can also be used in conjunction with other Sealey compressors.

GBP 670.13

2

Sealey STW907 Torque Wrench Micrometer Style 3/4"Sq Drive 160-800Nm - Calibrated

Flip reverse Chrome Vanadium steel ratchet head with smooth action mechanism. Scale graduated in Nm and lb.ft. Calibration tolerance in accordance with BS EN ISO 6789-1:2017. Wrenches are individually tested to standards with ±4% accuracy and each wrench is issued with an individually numbered test certificate. Aluminium knurled handle for comfort and control. Supplied in storage case.

GBP 450.00

1

Sealey Compressor 100L Belt Drive 3HP with Cast Cylinders & Wheels

Suitable for the professional workshop, these units are fitted with a genuine 3hp motor. Twin capacitors and a centrifugal switch aid trouble free start up on a 13amp supply. Pumps feature heavy-duty full cast cylinders, capped by alloy heads for improved heat dissipation and long life. Heavy-duty drive guards protect belt and flywheel that is designed to force air over the pump to aid cooling. Supplied with full CE certification, test certificates and operating/maintenance manual.

GBP 799.99

2

Sealey Compressor 50L Belt Drive 3HP with Cast Cylinders & Wheels

Suitable for the professional workshop, these units are fitted with a genuine 3hp motor. Twin capacitors and a centrifugal switch aid trouble free start up on a 13A supply. Pumps feature heavy-duty full cast cylinders, capped by alloy heads for improved heat dissipation and long life. Heavy-duty drive guards protect belt and flywheel that is designed to force air over the pump to aid cooling. Supplied with full CE certification, test certificates and operating/maintenance manual.

GBP 799.99

2

Sealey Compressor 200L Belt Drive 3HP with Cast Cylinders

Suitable for the professional workshop, these units are fitted with a genuine 3.5hp motor. Twin capacitors and a centrifugal switch aid trouble-free start-up on a 13A supply. Pumps feature heavy-duty full cast cylinders, capped by alloy heads for improved heat dissipation and long-life. Heavy-duty drive guards protect belt and flywheel that is designed to force air over the pump to aid cooling. Equipped with rear wheels and two casters at the front, along with a sturdy front handle, for effortless movement and positioning in the workshop.

GBP 999.99

2

Sealey Compressor 150L Belt Drive 3HP with Cast Cylinders

Suitable for the professional workshop, these units are fitted with a genuine 3hp motor. Twin capacitors and a centrifugal switch aid trouble-free start up on a 13A supply. Pumps feature heavy-duty full cast cylinders, capped by alloy heads for improved heat dissipation and long life. Heavy-duty drive guards protect belt and flywheel that is designed to force air over the pump to aid cooling. Supplied with full CE certification, test certificates and operating/maintenance manual.

GBP 999.99

1

Sealey SAC52775B Air Compressor 270L Belt Drive 7.5hp 3ph 2-Stage with Cast Cylinders

Heavy-duty 3-phase compressor suitable for the professional workshop. 2-Stage pump system coupled with a 7.5hp motor maximizes performance to keep running costs low compared to single stage, single phase model. Pump features heavy-duty full cast cylinders, capped by an alloy head for improved heat dissipation and long-life. Heavy-duty drive guards protect belt and flywheel that is designed to force air over the pump to aid cooling. Supplied with full CE certification, test certificates and operating/maintenance manual.

GBP 2509.00

2

Sealey SAC42055B Air Compressor 200L Belt Drive 5.5hp 3ph 2-Stage with Cast Cylinders

Heavy-duty 3-phase compressors suitable for the professional workshop. • 2-Stage pump system coupled with a 5.5hp motor maximizes performance to keep running costs low compared to single stage single phase model. • Pump features heavy-duty full cast cylinders, capped by alloy heads for improved heat dissipation and long-life. • Heavy-duty drive guards protect belt and flywheel that is designed to force air over the pump to aid cooling. • Supplied with full CE certification, test certificates and operating/maintenance manual. • This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery.

GBP 2083.00

2

Sealey SAC55075B Air Compressor 500L Belt Drive 7.5hp 3ph 2-Stage with Cast Cylinders

• Air Displacement: 29.3cfm(830L/min). • Maximum Free Air Delivery: 22.6cfm(640L/min). • Maximum Pressure: 145psi(10bar). • Heavy-duty 3-phase compressor suitable for the professional workshop. • 2-Stage pump system coupled with a 7.5hp motor maximizes performance to keep running costs low compared to single stage, single phase model. • Pump features heavy-duty full cast cylinders, capped by an alloy head for improved heat dissipation and long-life. • Heavy-duty drive guards protect belt and flywheel that is designed to force air over the pump to aid cooling. • Supplied with full CE certification, test certificates and operating/maintenance manual. • This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery.

GBP 3309.00

2

Sealey SAC2203BLN Air Compressor 200L Belt Drive 3hp with Cast Cylinders Low Noise

Heavy-duty low noise compressor suitable for garage, bodyshop and industrial applications. Fitted with cast iron cylinder head enabling slower revving and improved pump life. Fully enclosed, insulated design gives quiet running at just 68dB(A) (at 1m) and protects vital components from damage. Features fully automatic pressure cut-out switch and tank pressure gauge. Heavy-duty single phase electric motor with soft start feature. Control box features tachometer for monitoring use and optimizing service times. Supplied with full CE certification, test certificate, operating/maintenance manual.

GBP 3501.00

2

Sealey SAC32775B Air Compressor 270L Belt Drive 7.5hp 3ph

Heavy-duty 3-phase compressor suitable for the professional workshop. Triple cylinder pump system coupled with a 7.5hp motor maximizes performance to keep running costs low compared to single stage, single phase models. Pump features heavy-duty full cast cylinders, capped by alloy heads for improved heat dissipation and long-life. Heavy-duty drive guards protect belt and flywheel that is designed to force air over the pump to aid cooling. Supplied with full CE certification, test certificates and operating/maintenance manual. Includes a drain valve for easy release of condensed water build-up in the tank.

GBP 2296.00

2

Sealey SAC32055B Air Compressor 200L Belt Drive 5.5hp 3ph

Heavy-duty 3-phase compressor suitable for the professional workshop. Triple cylinder pump system coupled with a 5.5hp motor maximizes performance to keep running costs low compared to single stage, single phase models. Pump features heavy-duty full cast cylinders, capped by an alloy heads for improved heat dissipation and long-life. Heavy-duty drive guards protect belt and flywheel that is designed to force air over the pump to aid cooling. Supplied with full CE certification, test certificates and operating/maintenance manual. Includes a drain valve for easy release of condensed water build-up in the tank.

GBP 1496.00

2

Brand

Colour

Size

Merchant

Price (EUR)