20 results (0,13953 seconds)

Show all filters

Brand

Colour

Show all

Size

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Showa NSK24 Blue Nitrile Gloves - Size 10

Showa NSK24 Blue Nitrile Gloves - Size 10

A flexible impermeable knit-lined nitrile glove providing grip and protection from an array of solvents, oils and acids. A double nitrile coating provides excellent chemical, oil and abrasion resistance whilst the cotton/polyester liner absorbs perspiration, for ultra-comfortable extended wear and with good mechanical resistance. Protects the hand and forearm from oils, hydrocarbons, grease and abrasion. Resists Hydrochloric Acid (37%) - Level 6 breakthrough time EN374. Rough textured finish over surface of hand for better handling.

GBP 0.00
1

Showa NSK26 Blue Nitrile Gloves - Size 10

Showa NSK26 Blue Nitrile Gloves - Size 10

A flexible impermeable knit-lined nitrile glove providing grip and protection from an array of solvents, oils and acids. A double nitrile coating provides excellent chemical, oil and abrasion resistance whilst the cotton/polyester liner absorbs perspiration, for ultra-comfortable extended wear and with good mechanical resistance. Protects the hand and forearm from oils, hydrocarbons, grease and abrasion. Resists Hydrochloric Acid (37%) - Level 6 breakthrough time EN374. Rough textured finish over surface of hand for better handling.

GBP 15.99
1

Showa Impact Resistant Gloves, Nitrile Coated, Blue/Black/Green, Size 10

Showa Impact Resistant Gloves, Nitrile Coated, Blue/Black/Green, Size 10

These durable and extremely robust gloves feature Thermo Plastic Rubber (TPR) on the back of the hands and fingers to bolster and protect against crushing and impact. Fully coated with nitrile, the gloves allow for excellent grip in wet and greasy working environments. Features and Benefits Protects the hand from contact and submersion in oils, grease, and hydrocarbons TPR impact protection allows for hand flexibility and prevents hand fatigue Reinforced knit cuff for a secure fit, preventing dirt and debris from getting into the glove Typical Applications Airports Construction Mining Offshore Oil & gas Ports Standards CE Category II EN 388:2016 4.1.2.1.X. Warnings Does not protect against thermal, electrical, and chemical hazards Do not use if at risk from machine entanglement Notes Clean using a damp cloth

GBP 29.99
1

Showa Latex Coated Grip Gloves, Green/Natural, Size 10

Showa Latex Coated Grip Gloves, Green/Natural, Size 10

These latex palm-coated gloves from Showa feature a rough finish coating to ensure an excellent grip in both wet and dry conditions. Ideal for heavy-duty lifting and handling, these flexible gloves resist tearing and offer a long product life. Features and Benefits The glove's anatomical shape facilitates movement The seamless cotton/polyester 10 gauge liner prevents irritation The natural rubber protects the hand from abrasive cuts and puncturing and extends the life of the glove The knuckles remain free ensuring good dexterity The back of the hand is ventilated to reduce perspiration Vending machine compatible to allow easy access for staff Typical Applications Building sites Carpentry Floor tiling Framework Highway maintenance Masonry Quarry work Roofing Standards CE Category II EN 388:2016 2.1.4.2.X. Notes Can be washed at 40C

GBP 4.59
1

Showa Kevlar Gloves, Cut Resistant, Yellow/Green, Size 10

Showa Kevlar Gloves, Cut Resistant, Yellow/Green, Size 10

Nitrile gloves with enhanced grip for abrasive, greasy tasks. Features and Benefits: Protects the hand from oils, hydrocarbons, grease and abrasion, with effective long lasting grip A flexible easy-maintenance glove, providing effective protection against cuts and with very good durability Breathable back of hand to reduce perspiration Typical Applications: Aerospace Automotive Construction Metal work Municipal services Manufacturing

GBP 11.99
1

240x Showa PU Coated Gloves, General Handling, White, Size 10

240x Showa PU Coated Gloves, General Handling, White, Size 10

These gloves feature a microporous polyurethane coating and are suitable for all of your general handling requirements. Features and Benefits: Ventilated back, seamless knit and anatomical shape enhances wearer comfort Provide wearers with high dexterity and hand protection from oils and abrasion The gloves are elastic and breathable and are designed for easy movement and continuous wear Typical Applications: General industrial use

GBP 837.60
1

Showa 690 Long Sleeve Gloves Size 10/Xl

Showa 690 Long Sleeve Gloves Size 10/Xl

Protect the hands and the entire arms against abrasion, chemical hazards, and liquids with the extended bonded sleeve gloves from Showa. Fully coated with an elasticated border, these strong and flexible gloves ensure reliable protection in a range of hazardous environments. Features and Benefits Elasticated ends seal and protect the hands and arms against chemicals Seamless design prevents irritation from seam to skin contact Textured finish on the palms and fingertips enhances grip Impermeable to liquids and grease for extended protection for the entire arm Easy to hang for storage purposes Flexible and soft for user comfort and reduced hand fatigue Cotton lining absorbs perspiration for comfort during extended wear Typical Applications Agriculture Automotive Chemical handling Decontamination work Drain and sewer cleaning Standards CE Category III EN388:2016 4.1.2.1.X. EN ISO 374-1:2016/Type B JKL EN ISO 374-5:2016 VIRUS Warnings Does not protect against thermal or electrical hazards Not for use near moving machinery: risk of entanglement Notes Wipe clean with a damp cloth Suitable for oil submersion Vending machine compatible

GBP 22.99
1

Showa Cut Resistant Gloves, Nitrile Coated, Grey, Size 10 - SHO9610386E

Showa Cut Resistant Gloves, Nitrile Coated, Grey, Size 10 - SHO9610386E

Grey gloves with a foamed nitrile 3/4 dipped coating over a DURACoil liner that is reinforced with HPPE. Features and Benefits: Foamed nitrile coating is breathable and efficiently protects the hand from oils and abrasions Maximum comfort when performing delicate tasks due to soft and flexible HPPE properties combined with high multifilament wrapping technique Ergonomically designed to replicate the shape of the hand and enhance wearer comfort Typical Applications: Aerospace Automotive Manufacturing Mechanical Engineering Glass industry Construction

GBP 19.99
1

120x Showa Cut Resistant Gloves, Nitrile Coated, Grey, Size 10 - SHO9610576E

120x Showa Cut Resistant Gloves, Nitrile Coated, Grey, Size 10 - SHO9610576E

Grey gloves with a foamed nitrile 3/4 dipped coating over a DURACoil liner that is reinforced with HPPE. Features and Benefits: Foamed nitrile coating is breathable and efficiently protects the hand from oils and abrasions Maximum comfort when performing delicate tasks due to soft and flexible HPPE properties combined with high multifilament wrapping technique Ergonomically designed to replicate the shape of the hand and enhance wearer comfort Typical Applications: Aerospace Automotive Manufacturing Mechanical Engineering Glass industry Construction

GBP 2398.80
1

120x Showa Cut Resistant Gloves, Nitrile Coated, Grey, Size 10 - SHO9610577E

120x Showa Cut Resistant Gloves, Nitrile Coated, Grey, Size 10 - SHO9610577E

Grey gloves with a foamed nitrile 3/4 dipped coating over a DURACoil liner that is reinforced with HPPE. Features and Benefits: Foamed nitrile coating is breathable and efficiently protects the hand from oils and abrasions Maximum comfort when performing delicate tasks due to soft and flexible HPPE properties combined with high multifilament wrapping technique Ergonomically designed to replicate the shape of the hand and enhance wearer comfort Typical Applications: Aerospace Automotive Manufacturing Mechanical Engineering Glass industry Construction

GBP 2518.80
1

Showa Chemical Resistant Gloves, Neoprene, Black/Blue, Size 10 - GLB9611225J

Showa Chemical Resistant Gloves, Neoprene, Black/Blue, Size 10 - GLB9611225J

The versatile CHM glove delivers excellent protection against a wide range of hazardous chemicals. Constructed with Neoprene and latex, these gloves are flexible for excellent movement and reduced hand fatigue, while the cotton flock liner absorbs sweat and keeps hands dry and comfortable during prolonged wear. Features and Benefits Protects wearers from acids, alcohols, oils, grease, caustics, salts, ketones, detergents, petroleum-based solvents, and animal fats Waterproof and ideal for working in damp and oily environments Tractor-tread pattern diverts fluids away from the hands for excellent grip Damage to the Neoprene coating shows up as spots on the wrist to highlight the end of the product life Extended cuff provides good arterial protection and prevents access to dirt and debris Double-dipped for extended resistance and protection Vending machine compatible for easy staff access Typical Applications Chemical plants Automotive Battery manufacturing Pesticide manufacturing Plant maintenance Standards CE Category III EN388:2016 2.0.2.1.X EN ISO 374-1:2016/Type A AJKLMNT EN ISO 374-5:2016 Notes Complies with 21CFR170-199, and is acceptable for food and pharmaceutical applications Both ASTM Test Methods F739 (total immersion) and F1383 (intermittent contact) were used to determine the chemical resistance properties

GBP 3.99
1

Showa S-TEX 377 Nitrile Foam Coated Cut D Gloves - Size 10/2XL

Showa S-TEX 377 Nitrile Foam Coated Cut D Gloves - Size 10/2XL

A highly cut resistant, robust fully coated nitrile glove that offers wearers protection from water, grease, oil and abrasion. Features and Benefits Cut resistant: Level 4/D (EN 388:2016) Hagane Coil technology liner ensure cut resistance The seamless, lightweight 12 gauge knitted liner prevents irritation and allows enhanced hand dexterity Long cuff protects the wearers wrist The gloves are ideal for use in wet and oily conditions where grip is required, due to the additional nitrile palm coating Typical Applications Concreting Handling oily components Maintenance Wet work Automotive Construction Oil and gas Waste management

GBP 16.99
1

Showa 4561 Nitrile Coated Cut D Gloves Size 10/2XL

Showa 4561 Nitrile Coated Cut D Gloves Size 10/2XL

The 4561 nitrile coated glove is an absorbent, cut resistant with ZORB-IT technology, which provides outstanding grip and durability in oily conditions. Suitable industries include automotive, construction, glass, oil & gas and steel & metals. Features and benefits: -Level D cut resistance (EN 388:2016) -Kevlar liner is cut resistant and inherently flame resistant -Lightweight, 15 gauge breathable liner allows warm air and moisture from inside to escape, keeping hands dry and comfortable -ZORB-IT sponge nitrile palm absorbs oil and grease -Resistant to contact heat up to 250C (EN 407:2004)

GBP 12.49
1

Showa Cut Resistant Gloves, PU Coated, Grey, Size 10

Showa Cut Resistant Gloves, PU Coated, Grey, Size 10

These Level C cut-resistant gloves offer comfort and dexterity as well as protection against cuts and abrasions. Made with a 13 gauge seamless knit, these multi-purpose gloves are breathable to reduce perspiration and irritation from rubbing seams during the working day. Features and Benefits PU foamed coating protects against light oils and grease to avoid discomfort Flexible HPPE properties allow for intricate tasks Ergonomic design replicates the shape of the hand for better movement and reduced hand fatigue Typical Applications Aerospace Automotive Engineering Construction Glass industry Manufacturing Warehousing and distribution Standards CE certified EN 388:2016

GBP 17.99
1

72x Showa Cut Resistant Gloves, Nitrile Coated, Green/Black, Size 10

72x Showa Cut Resistant Gloves, Nitrile Coated, Green/Black, Size 10

Black/green gloves with a foam nitrile palm coating over a spandex liner that is reinforced with stainless steel and aramid. Features and Benefits: Foamed flat dipped coating with sponge finish protects palm & fingers from abrasions and punctures, while offering optimum grip in both dry & oily applications Soft and flexible, whilst still offering high levels of cut and laceration resistance, due to being reinforced with stainless steel and aramid Lightweight, breathable knitted liner reduces perspiration and enhances wearer comfort for long lasting wear Ergonomically designed to replicate the hand's natural curves Typical Applications: Automotive Construction Glass industry Manufacturing Metallurgy Mechanical Assembly White goods

GBP 1223.28
1

Showa Cut Resistant Gloves, PU Coated, Black, Size 10

Showa Cut Resistant Gloves, PU Coated, Black, Size 10

These comfortable and breathable gloves provide excellent protection against cuts and abrasions. Ideal for use in a range of conditions, including oily and wet handling, the PU palm-coating protects the skin from fluids as well as abrasions. Designed to offer a minimal risk of skin allergies, these gloves allow for ease of movement and are comfortable even after prolonged periods of wear. Features and Benefits Elastic glove allows for freedom of movement Glove seams don't irritate or rub the skin Vending machine compatible Elasticated cuff for a secure fit Typical Applications Bodywork Automotive construction Electronics assembly Manufacturing Metal stamping Standards EN388:2003 Warnings Not for use in cases of electrical, chemical, or thermal risks

GBP 13.99
1

Showa 306 Glove Size 2XL - GLB9613060J

Showa 306 Glove Size 2XL - GLB9613060J

For excellent grip in wet or rainy work environments, the 306 multi-purpose glove from Showa repels water while the aerated latex coating allows heat and perspiration to escape to keep hands comfortable and dry. Features and Benefits Full latex coating delivers excellent grip in wet conditions Aerated foam construction cushions the hands against light impact Anatomically shaped for a comfortable fit Flexible material allows for full movement and reduces hand fatigue Vending machine compatible for quick PPE access Typical Applications Agriculture Construction sites Landscaping Logistics Rail Renewables Utilities Standards CE Category II EN388:2016 2.1.2.1.X. Warnings Does not protect against thermal, electrical, or chemical hazards Risk of entanglement when operating machinery Latex may cause allergies Notes Clean with a damp cloth

GBP 8.19
1

Showa S-TEX 377SC Cut Resistant Gloves with Safety Cuff - Size 10/X x l

Showa S-TEX 377SC Cut Resistant Gloves with Safety Cuff - Size 10/X x l

Showa S-TEX 377SC fully coated nitrile cut resistance gloves with safety cuff. Nitrile palm coating with extra nitrile foam provides a high level of protection while the Hagane Coil liner (stainless steel/polyester) gives a comfortable fit. A PVC/polyester safety cuff provides protection over the wrist as well as easy donning and doffing. Features and Benefits Cut resistant: Level D (EN 388:2016) 13 gauge knitted liner, engineered with Hagane Coil technology for added comfort Strong and sturdy cuff extends protection to over this wrist Safety cuff enables quick and easy removal in case of emergency Nitrile coating with a second foamed nitrile coating provides high abrasion resistance Protects the hand from oils, hydrocarbons, grease and abrasion, with long lasting grip performance under wet and oily conditions

GBP 20.99
1

Showa S-Tex 581 Nitrile Coated Cut 5/E Gloves (S-10) (XXL)

Showa S-Tex 581 Nitrile Coated Cut 5/E Gloves (S-10) (XXL)

These cut protection gloves feature unique Hagane Coil Technology to deliver enhanced protection even when bending and flexing. Extremely lightweight, these gloves are coated with foamed nitrile to enhance grip and give an extremely lightweight and comfortable wearing experience. Features and Benefits Nitrile palm coating is embossed to divert liquid away from the hands and improve grip Ergonomic shape for comfort and reduced hand fatigue Palm coating provides level 4 abrasion resistance Microporous materials allow for continuous airflow to keep hands dry and comfortable Lightweight for comfort during long periods of wear Seamless knitted style prevents rubbing and irritation Handles contact heat up to 250C for approximately 15 seconds Reinforced with Kevlar for added heat protection Vending machine compatible to allow easy PPE access to staff Typical Applications Automotive Construction Glass industry Metalwork Masonry Assembly Standards CE Category II EN388:2016 4.X.4.2.E.

GBP 15.99
1

Showa Kevlar Gloves, Cut Resistant, Yellow/Blue, Size 10

Showa Kevlar Gloves, Cut Resistant, Yellow/Blue, Size 10

Keep hands protected against cuts and abrasion injuries with the GP-KV1 gloves from Showa. Lined with cut-resistant Aramid fibre, the natural latex coating delivers excellent grip in both wet and dry working environments. Features and Benefits Seamless knit design prevents seam to skin contact for reduced irritation The antibacterial treatment inhibits odour causing bacteria to form for improved hygiene The uncoated glove back maintains breathability, reducing the build-up of perspiration and improving user comfort Flexible design allows for excellent movement and reduced hand fatigue Rough finish on the latex coating improves grip and mechanical handling Typical Applications Aerospace Automotive Construction Glass industry Mechanical Utilities Metallurgy Standards CE Category II EN388:2016 3.X.4.3.C. Warnings Does not protect against thermal, electrical, and chemical hazards Do not use where there is a risk of machine entanglement Notes 10 gauge Kevlar liner Wipe clean with a damp cloth

GBP 11.99
1