24 results (0,15283 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

SwissTech 22.00MM HSS-Co 8% Threaded Shank Slot Drills - Uncoated

SwissTech 22.00MM HSS-Co 8% Threaded Shank Slot Drills - Uncoated

Series 29 - Regular Series slot drills are designed to be the mainstay of general cutting applications, manufactured from an uncoated high speed steel and cobalt construction they offer excellent tool durability and cutting performance in centre cutting applications. Features and Benefits High speed steel and cobalt construction for improved durability 2 flutes for excellent cutting efficiency and improved chip control Suitable for general purpose applications Standards Dimensions to DIN 844 Threaded shank to DIN 1835B

GBP 45.99
1

SwissTech M16X2 Blue Sp/Ft 376 HSS- EV OX Tap

SwissTech M16X2 Blue Sp/Ft 376 HSS- EV OX Tap

HSS blue ring ISO (BLT) metric coarse oxidised spiral flute taps are made with a strong high speed steel with a black oxide finish for deep blind holes with reduced wear and improved heat resistance. Features and Benefits High speed steel construction Black oxide finish for reduced wear and improved heat resistance Specification For deep blind holes Helix angle 45 BTL - Biteless taper Taper lead to DIN form C (2 x P to 3 x P) Tapping tolerance to 6H DIN 371/376 Typical Applications Tapping Steel Stainless steel Cast iron

GBP 56.99
1

4.0MM St/Sh Long 2FL Slot Drill Q-Coat

4.0MM St/Sh Long 2FL Slot Drill Q-Coat

Series 62 - Long Series Dimensions to DIN 844. Centre cutting. To Manufacturers Standards. Cutting diameter to h10. Shank diameter to h6. SDQ-2PS Carbide Q-Coat. 'Q-Coat' Coating has been specifically developed to give carbide cutters the 'edge' when faced with severe machining conditions. Materials up to 66 HRC. Dry cutting. Die and Mould machining. Reduced coolant usage and disposal. Up to 100% longer cutter life. Reduced manufacturing costs. A multi-layer coating capable of operating at higher speed and feed. Excellent oxidisation resistance. High speed machining. Surface hardness 3300HV. Surface coefficient against steel 0.25. Thickness of coating 305um. Maximum working temperature 850. Re-coating service also available.

GBP 43.99
1

SwissTech 20MM HSS-Cobalt PM Weldon C/P Ripper P/Power

SwissTech 20MM HSS-Cobalt PM Weldon C/P Ripper P/Power

Series 99 - Regular Centre cutting. Weldon shank to DIN 1835B. Shank diameter to h6.Dimensions to DIN 844. The latest enhancement of the SwissTech range, these cutters deliver excellent performance when cutting difficult materials, even at high speeds. Manufactured from premium PM (Powder Metallurgy) tool steel, with an excellent cutting geometry. Designed for strength and rigidity, minimising vibration in high speed cutting applications and providing improved productivity. These cutters are further enhanced by the SwissTech Peak Power? coating, suiting dry cutting applications, having higher oxidization resistance and hot-hardness than conventional TiALN or TiCN coatings, withstanding the high thermal loads associated with high speed cutting applications.

GBP 72.99
1

SwissTech 5.0MM St/Sh Long 4FL End Mill Q-Coat

SwissTech 5.0MM St/Sh Long 4FL End Mill Q-Coat

Series 68 - Long Series Dimensions to DIN 844. Centre cutting. To Manufacturers Standards. Cutting diameter to h10. Shank diameter to h6. EMQ-4PS/L Carbide Q-Coat. 'Q-Coat' Coating has been specifically developed to give carbide cutters the 'edge' when faced with severe machining conditions. Materials up to 66 HRC. Dry cutting. Die and Mould machining. Reduced coolant usage and disposal. Up to 100% longer cutter life. Reduced manufacturing costs. A multi-layer coating capable of operating at higher speed and feed. Excellent oxidisation resistance. High speed machining. Surface hardness 3300HV. Surface coefficient against steel 0.25. Thickness of coating 305um. Maximum working temperature 850. Re-coating service also available.

GBP 49.99
1

SwissTech 20.00MM Series 93 HSS-E PM Weldon Shank 3 Flute End Mills - Peak Power Coated

SwissTech 20.00MM Series 93 HSS-E PM Weldon Shank 3 Flute End Mills - Peak Power Coated

Series 93 - Regular Centre cutting. Weldon shank to DIN 1835B. Shank diameter to h6. Dimensions to DIN 844. The latest enhancement of the SwissTech range, these cutters deliver excellent performance when cutting difficult materials, even at high speeds. Manufactured from premium PM (Powder Metallurgy) tool steel, with an excellent cutting geometry. Designed for strength and rigidity, minimising vibration in high speed cutting applications and providing improved productivity. These cutters are further enhanced by the SwissTech Peak Power coating, suiting dry cutting applications, having higher oxidization resistance and hot-hardness than conventional TiALN or TiCN coatings, withstanding the high thermal loads associated with high speed cutting applications.

GBP 54.99
1

SwissTech 12.00MM Series 60 Carbide 2 Flute Plain Shank Short Series Slot Drill

SwissTech 12.00MM Series 60 Carbide 2 Flute Plain Shank Short Series Slot Drill

Series 60 Short Series Dimensions to DIN 844 Centre cutting. To Manufacturers Standards. Cutting diameter to h10. Shank diameter to h6. SDQ-2PS Carbide Q-Coat. 'Q-Coat' Coating has been specifically developed to give carbide cutters the 'edge' when faced with severe machining conditions. Materials up to 66 HRC. Dry cutting. Die and Mould machining. Reduced coolant usage and disposal. Up to 100% longer cutter life. Reduced manufacturing costs. A multi-layer coating capable of operating at higher speed and feed. Excellent oxidisation resistance. High speed machining. Surface hardness 3300HV. Surface coefficient against steel 0.25. Thickness of coating 305um. Maximum working temperature 850. Re-coating service also available.

GBP 62.99
1

SwissTech M16X2 Blue Sp/Pt 376 HSS- EV OX Tap

SwissTech M16X2 Blue Sp/Pt 376 HSS- EV OX Tap

With a strong high speed steel construction for improved rigidity when machining and a black oxide finish for improved wear and heat resistance, the 'Blue Ring' range of gun nose taps from Swiss + Tech are ideal for tough application and through holes. Features and Benefits High speed steel construction for improved rigidity when machining Black oxide coating for reduced heat and improved wear resistance Gun nose spiral for through hole cutting Specifications For through holes Taper lead to DIN form B (3.5 x P to 5.5 x P) Tapping tolerance to 6H DIN 371/376 Typical Applications Tapping Through holes Steel Stainless steel Cast iron

GBP 62.99
1

SwissTech 4.0MM St/Sh Long 4FL End Mill Q-Coat

SwissTech 4.0MM St/Sh Long 4FL End Mill Q-Coat

Series 68 - Long Series Dimensions to DIN 844. Centre cutting. To Manufacturers Standards. Cutting diameter to h10. Shank diameter to h6. EMQ-4PS/L Carbide Q-Coat. 'Q-Coat' Coating has been specifically developed to give carbide cutters the 'edge' when faced with severe machining conditions. Materials up to 66 HRC. Dry cutting. Die and Mould machining. Reduced coolant usage and disposal. Up to 100% longer cutter life. Reduced manufacturing costs. A multi-layer coating capable of operating at higher speed and feed. Excellent oxidisation resistance. High speed machining. Surface hardness 3300HV. Surface coefficient against steel 0.25. Thickness of coating 305um. Maximum working temperature 850. Re-coating service also available.

GBP 46.99
1

SwissTech 8.0MM St/Sh Long 2FL Slot Drill Q-Coat

SwissTech 8.0MM St/Sh Long 2FL Slot Drill Q-Coat

Series 62 - Long Series Dimensions to DIN 844. Centre cutting. To Manufacturers Standards. Cutting diameter to h10. Shank diameter to h6. SDQ-2PS Carbide Q-Coat. 'Q-Coat' Coating has been specifically developed to give carbide cutters the 'edge' when faced with severe machining conditions. Materials up to 66 HRC. Dry cutting. Die and Mould machining. Reduced coolant usage and disposal. Up to 100% longer cutter life. Reduced manufacturing costs. A multi-layer coating capable of operating at higher speed and feed. Excellent oxidisation resistance. High speed machining. Surface hardness 3300HV. Surface coefficient against steel 0.25. Thickness of coating 305um. Maximum working temperature 850. Re-coating service also available.

GBP 51.99
1

SwissTech 20MM HSS-Cobalt PM Weldon F/P Ripper P/Power

SwissTech 20MM HSS-Cobalt PM Weldon F/P Ripper P/Power

Series 94 - Regular Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6. Dimensions to DIN 844. The latest enhancement of the SwissTech range, these cutters deliver excellent performance when cutting difficult materials, even at high speeds. Manufactured from premium PM (Powder Metallurgy) tool steel, with an excellent cutting geometry. Designed for strength and rigidity, minimising vibration in high speed cutting applications and providing improved productivity. These cutters are further enhanced by the SwissTech Peak Power? coating, suiting dry cutting applications, having higher oxidization resistance and hot-hardness than conventional TiALN or TiCN coatings, withstanding the high thermal loads associated with high speed cutting applications.

GBP 59.99
1

SwissTech 16MM HSS-Cobalt PM Weldon F/P Ripper P/Power

SwissTech 16MM HSS-Cobalt PM Weldon F/P Ripper P/Power

Series 94 - Regular Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6. Dimensions to DIN 844. The latest enhancement of the SwissTech range, these cutters deliver excellent performance when cutting difficult materials, even at high speeds. Manufactured from premium PM (Powder Metallurgy) tool steel, with an excellent cutting geometry. Designed for strength and rigidity, minimising vibration in high speed cutting applications and providing improved productivity. These cutters are further enhanced by the SwissTech Peak Power? coating, suiting dry cutting applications, having higher oxidization resistance and hot-hardness than conventional TiALN or TiCN coatings, withstanding the high thermal loads associated with high speed cutting applications.

GBP 51.99
1

SwissTech 10.00MM Series 66 Carbide 4 Flute Plain Shank Short Series End Mills - EMQ-4PS Q-Coat Coated

SwissTech 10.00MM Series 66 Carbide 4 Flute Plain Shank Short Series End Mills - EMQ-4PS Q-Coat Coated

Series 66 - Short Series Dimensions to DIN 844. Centre cutting. To Manufacturers standards. Cutting diameter to h10. Shank diameter to h6. EMQ-4PS/L Carbide Q-Coat. 'Q-Coat' Coating has been specifically developed to give carbide cutters the 'edge' when faced with severe machining conditions. Materials up to 66 HRC. Dry cutting. Die and Mould machining. Reduced coolant usage and disposal. Up to 100% longer cutter life. Reduced manufacturing costs. A multi-layer coating capable of operating at higher speed and feed. Excellent oxidisation resistance. High speed machining. Surface hardness 3300HV. Surface coefficient against steel 0.25. Thickness of coating 305um. Maximum working temperature 850. Re-coating service also available.

GBP 55.99
1

SwissTech 3.0MM St/Sh Long 2FL Slot Drill Q-Coat

SwissTech 3.0MM St/Sh Long 2FL Slot Drill Q-Coat

Series 62 - Long Series Dimensions to DIN 844. Centre cutting. To Manufacturers Standards. Cutting diameter to h10. Shank diameter to h6. SDQ-2PS Carbide Q-Coat. 'Q-Coat' Coating has been specifically developed to give carbide cutters the 'edge' when faced with severe machining conditions. Materials up to 66 HRC. Dry cutting. Die and Mould machining. Reduced coolant usage and disposal. Up to 100% longer cutter life. Reduced manufacturing costs. A multi-layer coating capable of operating at higher speed and feed. Excellent oxidisation resistance. High speed machining. Surface hardness 3300HV. Surface coefficient against steel 0.25. Thickness of coating 305um. Maximum working temperature 850. Re-coating service also available.

GBP 62.99
1

SwissTech 16MM HSS-Cobalt PM Weldon C/P Ripper P/Power

SwissTech 16MM HSS-Cobalt PM Weldon C/P Ripper P/Power

Series 99 - Regular Centre cutting. Weldon shank to DIN 1835B. Shank diameter to h6.Dimensions to DIN 844. The latest enhancement of the SwissTech range, these cutters deliver excellent performance when cutting difficult materials, even at high speeds. Manufactured from premium PM (Powder Metallurgy) tool steel, with an excellent cutting geometry. Designed for strength and rigidity, minimising vibration in high speed cutting applications and providing improved productivity. These cutters are further enhanced by the SwissTech Peak Power? coating, suiting dry cutting applications, having higher oxidization resistance and hot-hardness than conventional TiALN or TiCN coatings, withstanding the high thermal loads associated with high speed cutting applications.

GBP 49.99
1

SwissTech 12.00MM Series 66 Carbide 4 Flute Plain Shank Short Series End Mills - EMQ-4PS Q-Coat Coated

SwissTech 12.00MM Series 66 Carbide 4 Flute Plain Shank Short Series End Mills - EMQ-4PS Q-Coat Coated

Series 66 - Short Series Dimensions to DIN 844. Centre cutting. To Manufacturers standards. Cutting diameter to h10. Shank diameter to h6. EMQ-4PS/L Carbide Q-Coat. 'Q-Coat' Coating has been specifically developed to give carbide cutters the 'edge' when faced with severe machining conditions. Materials up to 66 HRC. Dry cutting. Die and Mould machining. Reduced coolant usage and disposal. Up to 100% longer cutter life. Reduced manufacturing costs. A multi-layer coating capable of operating at higher speed and feed. Excellent oxidisation resistance. High speed machining. Surface hardness 3300HV. Surface coefficient against steel 0.25. Thickness of coating 305um. Maximum working temperature 850. Re-coating service also available.

GBP 74.99
1

SwissTech 3.0MM St/Sh Long 4FL End Mill Q-Coat

SwissTech 3.0MM St/Sh Long 4FL End Mill Q-Coat

Series 68 - Long Series Dimensions to DIN 844. Centre cutting. To Manufacturers Standards. Cutting diameter to h10. Shank diameter to h6. EMQ-4PS/L Carbide Q-Coat. 'Q-Coat' Coating has been specifically developed to give carbide cutters the 'edge' when faced with severe machining conditions. Materials up to 66 HRC. Dry cutting. Die and Mould machining. Reduced coolant usage and disposal. Up to 100% longer cutter life. Reduced manufacturing costs. A multi-layer coating capable of operating at higher speed and feed. Excellent oxidisation resistance. High speed machining. Surface hardness 3300HV. Surface coefficient against steel 0.25. Thickness of coating 305um. Maximum working temperature 850. Re-coating service also available.

GBP 49.99
1

SwissTech 11.00MM Series 66 Carbide 4 Flute Plain Shank Short Series End Mills - EMQ-4PS Q-Coat Coated

SwissTech 11.00MM Series 66 Carbide 4 Flute Plain Shank Short Series End Mills - EMQ-4PS Q-Coat Coated

Series 66 - Short Series Dimensions to DIN 844. Centre cutting. To Manufacturers standards. Cutting diameter to h10. Shank diameter to h6. EMQ-4PS/L Carbide Q-Coat. 'Q-Coat' Coating has been specifically developed to give carbide cutters the 'edge' when faced with severe machining conditions. Materials up to 66 HRC. Dry cutting. Die and Mould machining. Reduced coolant usage and disposal. Up to 100% longer cutter life. Reduced manufacturing costs. A multi-layer coating capable of operating at higher speed and feed. Excellent oxidisation resistance. High speed machining. Surface hardness 3300HV. Surface coefficient against steel 0.25. Thickness of coating 305um. Maximum working temperature 850. Re-coating service also available.

GBP 63.99
1

SwissTech 20.00MM Series 95 HSS-E PM Weldon Shank 4 Flute End Mills - Peak Power Coated

SwissTech 20.00MM Series 95 HSS-E PM Weldon Shank 4 Flute End Mills - Peak Power Coated

Series 95 - Regular Centre cutting. Weldon shank to DIN 1835B. Shank diameter to h6. Dimensions to DIN 844. The latest enhancement of the SwissTech range, these cutters deliver excellent performance when cutting difficult materials, even at high speeds. Manufactured from premium PM (Powder Metallurgy) tool steel, with an excellent cutting geometry. Designed for strength and rigidity, minimising vibration in high speed cutting applications and providing improved productivity. These cutters are further enhanced by the SwissTech Peak Power? coating, suiting dry cutting applications, having higher oxidization resistance and hot-hardness than conventional TiALN or TiCN coatings, withstanding the high thermal loads associated with high speed cutting applications.

GBP 63.99
1

SwissTech 8.0MM St/Sh Long 4FL End Mill Q-Coat

SwissTech 8.0MM St/Sh Long 4FL End Mill Q-Coat

Series 68 - Long Series Dimensions to DIN 844. Centre cutting. To Manufacturers Standards. Cutting diameter to h10. Shank diameter to h6. EMQ-4PS/L Carbide Q-Coat. 'Q-Coat' Coating has been specifically developed to give carbide cutters the 'edge' when faced with severe machining conditions. Materials up to 66 HRC. Dry cutting. Die and Mould machining. Reduced coolant usage and disposal. Up to 100% longer cutter life. Reduced manufacturing costs. A multi-layer coating capable of operating at higher speed and feed. Excellent oxidisation resistance. High speed machining. Surface hardness 3300HV. Surface coefficient against steel 0.25. Thickness of coating 305um. Maximum working temperature 850. Re-coating service also available.

GBP 56.99
1

5x SwissTech 10.40MM Heavy Duty Cobalt + TiN Drill

5x SwissTech 10.40MM Heavy Duty Cobalt + TiN Drill

Series 1033 are heavy-duty drill used to drill steels with a tensile strength up to 1,400 N/mm2. Stainless steels, heat and acid resistant steels and phosphor bronze. TiN coating provides longer tool life. Features and Benefits High speed steel and cobalt construction for increased tool toughness Ideal for drilling steels with a tensile strength up to 1,400 N/mm2 TiN coating provides longer tool life Typical Applications Drilling Steel Standards Manufactured to DIN 338 RN

GBP 74.95
1

10x SwissTech 5.50MM Heavy Duty Cobalt + TiN Drill

10x SwissTech 5.50MM Heavy Duty Cobalt + TiN Drill

Series 1033 are heavy-duty drill used to drill steels with a tensile strength up to 1,400 N/mm2. Stainless steels, heat and acid resistant steels and phosphor bronze. TiN coating provides longer tool life. Features and Benefits High speed steel and cobalt construction for increased tool toughness Ideal for drilling steels with a tensile strength up to 1,400 N/mm2 TiN coating provides longer tool life Typical Applications Drilling Steel Standards Manufactured to DIN 338 RN

GBP 51.90
1

SwissTech 4FL Carbide Plain Shank End Mills 3-10MM (Set-6)

SwissTech 4FL Carbide Plain Shank End Mills 3-10MM (Set-6)

6 Piece Sets Dimensions to DIN 844. Cutting diameter to js12. Shank diameter to h6. Contents: 3, 4, 5, 6, 8 and 10mm. SwissTech carbide cutters are specifically engineered to be used in CNC machine centres. The rigidity and integrity of the machine tool is paramount to the performance of this type of cutter. Carbide cutters are used mainly at high speed and feed rates. The increased temperatures associated with cutting at such high rates are absorbed by the carbide, which will retain its strength and hardness. SwissTech carbide cutters can be used across a range of materials.

GBP 65.99
1

SwissTech 3FL Carbide Plain Shank Slot Drills 3-10MM (Set-6)

SwissTech 3FL Carbide Plain Shank Slot Drills 3-10MM (Set-6)

6 Piece Sets Dimensions to DIN 844. Cutting diameter to js12. Shank diameter to h6. Contents: 3, 4, 5, 6, 8 and 10mm. SwissTech carbide cutters are specifically engineered to be used in CNC machine centres. The rigidity and integrity of the machine tool is paramount to the performance of this type of cutter. Carbide cutters are used mainly at high speed and feed rates. The increased temperatures associated with cutting at such high rates are absorbed by the carbide, which will retain its strength and hardness. SwissTech carbide cutters can be used across a range of materials.

GBP 65.99
1