80 results (0,15584 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Notifier ECO1005TA ECO 58 Fixed Temperature Detector

Notifier ECO1005TA ECO 58 Fixed Temperature Detector

Notifier ECO1005TA ECO 58 Fixed Temperature DetectorThe ECO1005T A thermal detector belongs to System Sensors ECO1000 range of detectors. ECO1000 is a range of conventional detectors which have been produced using the latest in manufacturing technology and supplied with an array of advanced features making them better by design.The ECO1005T A thermal detector uses a state of the art thermal element combined with an application specific integrated circuit ASIC to provide quick and accurate detection of fires. The detector incorporates a static element and is suitable where ambient conditions normally exhibit rapid changes in temperature e.g. kitchensKey FeaturesLow profile designLow current draw58C operating temperatureOperates at 12 and 24VDCRemote alarm test featureEasy MaintenanceApproved to EN54 52000 Class A2SApproved to MED 9698EC Amendment 200926ECExtended warranty

GBP 20.20
1

Notifier ECO1005A ECO Rate of Rise Temperature Detector

Notifier ECO1005A ECO Rate of Rise Temperature Detector

Notifier ECO1005A ECO Rate of Rise Temperature DetectorThe ECO1005 A thermal detector belongs to System Sensors ECO1000 range of detectors. ECO1000 is a range of conventional detectors which have been produced using the latest in manufacturing technology and supplied with an array of advanced features making them better by design.The ECO1005 A thermal detector uses a state of the art thermal element combined with an application specific integrated circuit ASIC to provide quick and accurate detection of fires. The detector incorporates both rate of rise and static elements and is suitable for all areas where the ambient conditions do not normally exhibit rapid changes in temperature.Key FeaturesLow profile designLow current draw58C operating temperatureOperates at 12 and 24VDCRemote alarm test featureEasy MaintenanceApproved to EN54 52000 Class A1RApproved to MED 9698EC Amendment 200926ECExtended warranty

GBP 21.01
1

System Sensor WSS-PR-I00 Wall Mounted Sounder Strobe With Isolator - White Skirt

System Sensor WSS-PR-I00 Wall Mounted Sounder Strobe With Isolator - White Skirt

System Sensor WSS-PR-I00 Wall Mounted Sounder Strobe With Isolator - White SkirtThe WSS-PR-I00 is a wall mounted sounder strobe with integral isolator.The beacon has fast and simple installation and is control powered by the fire panel via the loop wiring. The control of the device is enabled using on-board switches or via the digital protocol using the control panel.Key FeaturesWall Mounted Addressable Sounder StrobeColour White Body Red LensIntegral IsolatorFast and simple installationPlease note This product is not approved to EN54-23 Visual Alarm Device and must not be used as a visual alarm device to provide a primary warning notification of fire.

GBP 86.93
1

System Sensor Agile Wireless Waterproof Manual Call Point R5A-RF

System Sensor Agile Wireless Waterproof Manual Call Point R5A-RF

System Sensor Agile Wireless Waterproof Manual Call Point R5A-RFThe R5A-RF radio call point is a battery-operated RF device designed for use with the M200G-RF radio gateway running on an addressable fire system using a compatible proprietary communication protocol. It is a waterproof manual call point combined with a wireless RF transceiver and fits onto a wireless backplate. This device conforms to EN54-11 and EN54-25. It complies with the requirements of 201453EU for conformance with the RED directive.

GBP 230.65
1

System Sensor B501AP Analogue Sensor Base Pure White

System Sensor B501AP Analogue Sensor Base Pure White

System Sensor B501AP Analogue Sensor Base Pure WhiteThe System Sensor B504AP is an analogue sensor base with SEMS screw connections for isolated and non-isolated detectors and address identification label.The B501AP Base is designed to accept S200 detectors and has a tamper resistant feature which can be enabled by breaking off a plastic tab. When enabled the detector cannot be removed without a suitable tool. The base can be labelled with a break-off address tag. Available in white ivory and black colours.

GBP 4.13
1

System Sensor M200G-RF-26 Agile Gateway

System Sensor M200G-RF-26 Agile Gateway

System Sensor M200G-RF-26 Agile GatewayLoop-powered Gateway device for System Sensor Agile wireless system. Up to 8 Gateways may be used on the same loop. This requires a B501AP base. Compatible with DXc panels only.The System Sensor M200G-RF is a loop powered gateway unit from the Agile range of wireless fire system equipment. This device is designed to communicate with the System Sensor Agile range of wireless fire system devices.The Agile wireless platform is powered by robust mesh network technology providing up to two communication paths to each wireless device. This makes the network highly reliable protecting against broken communication links. Mesh network technology enables flexible and economic installations in a wide variety of building footprints.Key FeaturesRequires a B501AP basePlease NoteThis panel is compatible with the Morley System Sensor DXc panel range only.

GBP 289.18
1

System Sensor M210E-B Single Input Monitor Module With M200E-SMB

System Sensor M210E-B Single Input Monitor Module With M200E-SMB

Please note The price of this product including the base is a special promotional project offer directly from the manufacturer.System Sensor M210E-B Single Input Monitor Module With M200E-SMBProvides single channel monitoring of normally open contact fire alarm and supervisory devices. The M210E has a single tri-colour greenredyellow LED which can be set by panel command to pulse green each time the module is polled. In case of an alarm the panel can switch the red indicator on continuously.The Yellow LED is controlled by the module and blinks to indicate an open circuit on the input circuit. This fault indication is overridden by a panel command to turn the red LED on.Key FeaturesComes withM200E-SMB for surface mounting

GBP 56.24
1

System Sensor Agile Wireless White Wall Mounted Addressable Sounder WSO-WW-RF

System Sensor Agile Wireless White Wall Mounted Addressable Sounder WSO-WW-RF

System Sensor Agile Wireless White Wall Mounted Addressable Sounder WSO-WW-RFThe WSO-WW-RF radio wall-mounted sounder is a battery operated RF device designed for use with the M200G-RF radio gateway part of the Series 200 RF range running on an addressable fire system using a compatible proprietary communication protocol.It is a two stage sounder module combined with a wireless RF transceiver that fits into a standard B501RF wireless base. The appropriate volume and tone settings are selected by special application software AgileIQ. The 2nd stage tone related to the 1st stage tone is controlled by the fire panel via the RF Gateway. This device conforms to EN54-3 and EN54-25. It complies with the requirements of 201453EU for conformance with the RED directive.

GBP 244.42
1

System Sensor Agile Wireless Red Wall Mounted Addressable Sounder WSO-RR-RF

System Sensor Agile Wireless Red Wall Mounted Addressable Sounder WSO-RR-RF

System Sensor Agile Wireless Red Wall Mounted Addressable Sounder WSO-RR-RFThe WSO-RR-RF radio wall-mounted sounder is a battery operated RF device designed for use with the M200G-RF radio gateway part of the Series 200 RF range running on an addressable fire system using a compatible proprietary communication protocol. It is a two stage sounder module combined with a wireless RF transceiver that fits into a standard B501RF wireless base.The appropriate volume and tone settings are selected by special application software AgileIQ. The 2nd stage tone related to the 1st stage tone is controlled by the fire panel via the RF Gateway. This device conforms to EN54-3 and EN54-25. It complies with the requirements of 201453EU for conformance with the RED directive.

GBP 230.65
1

System Sensor Agile Wireless Gateway Device M200G-RF

System Sensor Agile Wireless Gateway Device M200G-RF

System Sensor Agile Wireless Gateway Device M200G-RF The System Sensor M200G-RF is a loop powered gateway unit from the Agile range of wireless fire system equipment. This device is designed to communicate with the System Sensor Agile range of wireless fire system devices.The Agile wireless platform is powered by robust mesh network technology providing up to two communication paths to each wireless device. This makes the network highly reliable protecting against broken communication links. Mesh network technology enables flexible and economic installations in a wide variety of building footprints.Please NoteThis panel is compatible with the Morley System Sensor DXc panel range only.

GBP 255.80
1

System Sensor M200XE Loop Isolation Module

System Sensor M200XE Loop Isolation Module

System Sensor M200XE Loop Isolation ModuleThere is a large number of System Sensor intelligent fire alarm systems the address loop with a recipient device up to 198 is protected by a single one loop interruption but in the case of loop short circuit the entire loop it may become inoperable. With the M200XE modules shorting is not desired can be reduced.Only a small part of the system falls out if the loop is broken down into isolators because in the case of a possible loop only the two isolators will not be available to the control panel. If the address loop voltage drops below 7V the isolator module - with FET on the branch breaks it off the loop in the non-short-term part of the address loop the assets remain operational. If the breakdown the loop voltage rises on one side of the module then the separated short-circuit loop section 3 mA max. 15 mA control current flows through the module.In isolation the address loop wires between min. 2.2 kOhm resistance. The isolated state is maintained until the voltage of the disconnected section is 7V the short-circuit or the abnormally high current consumption ceases to exist. After the termination of the termination the isolator disengages the loop automatically.The two-colour LED on the module flashes green in the normal state of the loop every 3 seconds. If the module on any side it detects a short-circuit it illuminates with continuous yellow light during the shutter. The M200XE module in the M200E-SMB mounting box is wall-mounted with the M200E-DIN clip directly on the DIN rail M200E-PMB clip can be mounted in the fire panels box.

GBP 55.08
1

System Sensor M501MEA Mini Input Module

System Sensor M501MEA Mini Input Module

System Sensor M501MEA Mini Input ModuleThe M501MEA is an addressable input module. It will interface with contact devices such as security contacts waterflow switches and call points. It is capable of being collected in Class B wiring configurations. It provides a two-wire initiation circuit for normally open contact fire alarm and security devices. In addition to transmitting the supervised state of the monitored device normal open or short the full analogue supervision measurement is sent back to the panel.The compact size allows it to fit inside devices or conjunction boxes behind devices. Its size and lightweight allows it to be installed without the need to be rigidly mounted. When the proprietary Series 200 Advanced Protocol is enabled a number of features become available namely the advanced feature to determine alarms or troubles in a reduced time. An extended 3-year warranty covers all System Sensor products.

GBP 58.52
1

System Sensor WSO-PR-N00-B Wall Mounted Red Sounder With Base

System Sensor WSO-PR-N00-B Wall Mounted Red Sounder With Base

Please note The price of this product including the base is a special promotional project offer directly from the manufacturer.System Sensor WSO-PR-N00-B Wall Mounted Red Sounder With BaseWall mount sounder is a high-quality loop powered device designed to alert building occupants of an emergency. It utilizes the System Sensor B501AP base for improved installation flexibility. When triggered by the fire panel its powerful sounder gives an audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.Key FeaturesIncludes B501AP baseLarge cable accessRear or surface cable entryLoop continuity springCommon base with detectors B501APDevice protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols32 tone selection to cover many marketsAddress tag for clear indicationAnti-tamper featureIn-built isolation optionsSimple familiar rotary wheel address controls

GBP 50.81
1

System Sensor WSO-PP-N00-B Wall Mounted White Sounder With Base

System Sensor WSO-PP-N00-B Wall Mounted White Sounder With Base

Please note The price of this product including the base is a special promotional project offer directly from the manufacturer.System Sensor WSO-PP-N00-B Wall Mounted White Sounder With BaseWall mount sounder is a high-quality loop powered device designed to alert building occupants of an emergency. It utilizes the System Sensor B501AP base for improved installation flexibility. When triggered by the fire panel its powerful sounder gives an audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.Key FeaturesIncludes B501AP baseLarge cable accessRear or surface cable entryLoop continuity springCommon base with detectors B501APDevice protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols32 tone selection to cover many marketsAddress tag for clear indicationAnti-tamper featureIn-built isolation optionsSimple familiar rotary wheel address controls

GBP 54.43
1

System Sensor IM-10EA Ten Input Monitor Module

System Sensor IM-10EA Ten Input Monitor Module

System Sensor IM-10EA Ten Input Monitor ModuleThe IM-10EA Ten Input Monitor Module is intended for use in an intelligent alarm system. Each monitor module is intended to interface between a control panel and normally open contact devices such as pull stations. A common SLC input is used for all modules and the initiating device loops share a common supervisory supply and ground.Otherwise each monitor operates independently from the others. Each module also has panel-controlled tri-colour green red and amber LED indicators. The panel can cause the LEDs to blink latch on or latch off. The module also provides short circuit isolators to prevent shorts on the fire detection and alarm system loop from disabling more than one device on the intelligent loop.

GBP 538.40
1

System Sensor Recess Mounting Kit White RMK400AP

System Sensor Recess Mounting Kit White RMK400AP

System Sensor Recess Mounting Kit White RMK400APRecess mounting kit suitable for flush mounting bases into a false ceiling. The System Sensor RMK400AP recessed mounting kit provides a simple installation solution where the application demands a lower profile sensor. The RMK400AP is for white sensors the RMK400AP-IV is for Ivory coloured sensors.Key FeaturesReduces the depth of any System Sensors sensor mounted in a standard 102mm diameter base by up to 20mm.Appropriate for drywall or suspended acoustical panel ceilings.May be used with standard junction boxes connected to flexible conduit.Incorporates special mounting bracket that secures the kit and base assembly to the junction box and ceiling panel.

GBP 19.82
1

System Sensor CMX-10RME 10-Way Relay Control Output Card

System Sensor CMX-10RME 10-Way Relay Control Output Card

System Sensor CMX-10RME 10-Way Relay Control Output CardThe CMX-10RME is a multi-module card that groups 10 relay outputs. This is a space-saving and economical solution when many exits are needed. Each relay output 30VDC-1A has an LED LED output and microswitch with which each module can be switched off individually. The connectors can be plugged in for easy connection. The CMX-10RME multi-module card conforms to European CPD guidelines.

GBP 593.48
1

System Sensor MMX-10ME 10-Way Monitor Input Card

System Sensor MMX-10ME 10-Way Monitor Input Card

System Sensor MMX-10ME 10-Way Monitor Input CardThe MMX-10ME is a multi-module card that groups 10 monitored inputs. This is a space-saving and economical solution when many input modules are needed. Each input module has an LED LED output and micro switch with which each module can be switched off individually. The connectors can be plugged in for easy connection. The MMX-10ME multi-module card conforms to the European CPD guidelines.

GBP 517.07
1

System Sensor Agile Wireless Network Repeater M200F-RF

System Sensor Agile Wireless Network Repeater M200F-RF

System Sensor Agile Wireless Network Repeater M200F-RF The System Sensor M200F-RF is a wireless network repeater unit from the Agile range of wireless fire system equipment. This device is designed to communicate with the System Sensor Agile range of wireless fire system devices.The Agile wireless platform is powered by robust mesh network technology providing up to two communication paths to each wireless device. This makes the network highly reliable protecting against broken communication links. Mesh network technology enables flexible and economic installations in a wide variety of building footprints.Please contact us for pricing and commissioning services on the System Sensor Agile wireless system equipment.

GBP 219.64
1

System Sensor WST-PC-N00 Wall Mounted VAD Clear Lens with Red Flash

System Sensor WST-PC-N00 Wall Mounted VAD Clear Lens with Red Flash

System Sensor WST-PC-N00 Wall Mounted VAD Clear Lens with Red FlashWall mount strobe is a high-quality loop powered device designed to alert building occupants of an emergency. It utilizes the System Sensor B501AP base for improved installation flexibility. When triggered by the fire panel its intense strobe gives a highly visible warning. A choice of lens colours makes the device suitable for a wide variety of applicationsKey FeaturesLarge cable accessRear or surface cable entryLoop continuity springAutomatic synchronisation of strobePositive poke yoke engagementAddress tag for clear indicationAnti-tamper featureSimple familiar rotary wheel address controlsCommon base with detectors B501APDevice protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols

GBP 38.52
1