14 results (0,12121 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Talentum Air Purge for Exd Housing 12555

Talentum Air Purge for Exd Housing 12555

Talentum Air Purge for Exd Housing 12555Whilst the IR2 and IR3 types of Flame Detector can still work with contamination from dust or dirt for example on the sensor window their working range and sensitivity can be reduced. Cleaning the Flame Detector if it is high off the ground may be difficult and or expensive this is where the Flame Detector Air Purge kit comes in.By connecting an Air Line or Compressed Air Cylinder to the Air Purge hose the pressurized air can be used to clean the Flame Detectors sensor window. This can be done as and when required depending of the levels of contamination on the site to keep the Flame Detector working at its maximum capability.

GBP 687.30
1

Talentum Air Purge for Standard Housing 12556

Talentum Air Purge for Standard Housing 12556

Talentum Air Purge for Standard Housing 12556Whilst the IR2 and IR3 types of Flame Detector can still work with contamination from dust or dirt for example on the sensor window their working range and sensitivity can be reduced. Cleaning the Flame Detector if it is high off the ground may be difficult and or expensive this is where the Flame Detector Air Purge kit comes in.By connecting an Air Line or Compressed Air Cylinder to the Air Purge hose the pressurized air can be used to clean the Flame Detectors sensor window. This can be done as and when required depending of the levels of contamination on the site to keep the Flame Detector working at its maximum capability.

GBP 408.90
1

Talentum Stainless Steel Weather amp Dust Shield for Flameproof Flame Detector 07279

Talentum Stainless Steel Weather amp Dust Shield for Flameproof Flame Detector 07279

Talentum Stainless Steel Weather Dust Shield for Flameproof Flame Detector 07279Talentum Flame Detectors are ideal for applications where fast acting and accurate detection of fire is essential. Using infra-red IR sensing technology they can detect flames from all fuel types from hydrocarbon fires with 4.3m emissions through to invisible fires such as hydrogen. Talentum detectors can detect flames through such elements as dust steam and smoke they are also immune to the effects of wind or draughts of air. With the addition of an ultra-violet UV sensor Talentum detectors are highly immune to false signals such as sunlight. The detectors use advanced IR and UV technologies making Talentum one of the fastest most reliable and accurate flame detectors in the world. Its technology is truly unique looking at both the characteristic flicker and energy produced by flames. Talentum is the detector of choice for high value high risk applications - varying from nuclear power sites waste disposal plants to supersonic cars.Key FeaturesStainless SteelProtects fromSnowRainHeatDustSunMounts on Talentum adjustable bracket 07127

GBP 408.90
1

Talentum UV Dual IR Flame Detector Head Unit 16591

Talentum UV Dual IR Flame Detector Head Unit 16591

Talentum UV Dual IR Flame Detector Head Unit 16591These flame detectors give the highest immunity to false flame sources both indoors or out. They have internal self-test sources that check the detectors operation when remotely instructed. The maximum ambient temperature is normally 55 Celsius or 85 Celsius for the higher temperature specification detectors.Key FeaturesHighest immunity to false sourcesSuitable for indoor and outdoor areasDetects invisible flames from fuels such as hydrogen and other inorganic fuelsSelectable response speedOptical self-testLow power consumptionApproved to EN54-102002Applications Used OnAircraft hangarsEngine roomsEngine test facilitiesGeneratorsHigh voltage equipmentNuclear industryPower plantsStorage tanks

GBP 2409.90
1

Talentum Stainless Steel Adjustable Mounting Bracket 07127

Talentum Stainless Steel Adjustable Mounting Bracket 07127

Talentum Stainless Steel Adjustable Mounting Bracket 07127The 007127 is an adjustable mounting bracket for use with Talentum flame detectors. Grade 316 is the standard molybdenum-bearing grade second in importance to 304 amongst the austenitic stainless steels. The molybdenum gives 316 better overall corrosion resistant properties than Grade 304 particularly higher resistance to pitting and crevice corrosion in chloride environments. It has excellent forming and welding characteristics. It is readily brake or roll formed into a variety of parts for applications in the industrial architectural and transportation fields. Grade 316 also has outstanding welding characteristics. Post-weld annealing is not required when welding thin sectionsKey FeaturesStainless Steel 12 SWGAdjustable Horizontal Down by 45 Left or Right by 45Mounts on Walls or Unistru

GBP 95.70
1

Talentum Dual IR Flame Detector 16581

Talentum Dual IR Flame Detector 16581

Talentum Dual IR Flame Detector 16581These flame detectors give high immunity to false flame sources. They have internal self-test sources that check the detectors operation when remotely instructed. They can operate on a conventional 2-wire 14-28 Vdc fire systems or 4-20mA process control systems. Relay contacts are also available for Fire and Fault signals. The detectors operating modes can be user selected giving a choice of alarm currents response times latching or non-latching outputs and sensitivity. The detectors have a maximum ambient operating temperature of 55C.Key Features High immunity to false sources For applications with visible light present Detects invisible flames from fuels such as Hydrogen and other inorganic fuels Selectable response speed Optical self-test Low power consumption Approved to EN54-102002Applications Used On Churches Coal Handling Fume Cupboards Printing Spray Booths Textiles Waste Handling

GBP 1818.30
1

Talentum Dual IR Hazardous Area Flameproof Detector 16511

Talentum Dual IR Hazardous Area Flameproof Detector 16511

Talentum Dual IR Hazardous Area Flameproof Detector 16511These flame detectors give high immunity to false flame sources. They have internal self-test sources that check the detectors operation when remotely instructed.They can operate on a conventional 2-wire 14-28 Vdc fire systems or 4-20mA process control systems. Relay contacts are also available for Fire and Fault signals. The detectors operating modes can be user selected giving a choice of alarm currents response times latching or non-latching outputs and sensitivity. The detectors have a maximum ambient operating temperature of 55C.Key Features High immunity to false sources For applications with visible light present Detects invisible flames from fuels such as Hydrogen and other inorganic fuels Selectable response speed Optical self-test Low power consumption Approved to EN54-102002 IR2 Flame Detector RangeApplications Used On Churches Coal Handling Fume Cupboards Printing Spray Booths Textiles Waste Handling

GBP 2731.80
1

Talentum 1800-012 TT2 Calibration Kit

Talentum 1800-012 TT2 Calibration Kit

Talentum 1800-012 TT2 Calibration KitThe TalentumTT2 calibration kit enables in-situ adjustment of installed Talentum Flame Detectors bringing them back to factory fresh performance extending their service life.The kit comprises an infra-red excluding Shroud needed to eliminate potential interference from external warm bodies and an interface cable to attach to a Talentum service port.Simply hook the Shroud onto the front of the TalentumTT2 and connect the interface cable to the front of the Talentum Flame Detector to recalibrate. Then select the Recalibrate Talentum option from the TalentumTT2 main menu and follow the on-screen prompts.Recalibration takes around one minute and is fully automated using the TalentumTT2s on-board microprocessor which calculates the optimum settings.The new settings as well as a unique calibration reference number are stored in the TalentumTT2s memory which can later be downloaded to a PC for further analysis and to provide a record of the operation.

GBP 487.20
1

Talentum 16589-00 Triple IR Flame Detector Unit

Talentum 16589-00 Triple IR Flame Detector Unit

Talentum 16589-00 Triple IR Flame Detector UnitThe Talentum triple Infra-Red IR Flame Detector is designed to protect areas where open fires may be expected and detects almost all flames including hydrocarbon fires with 4.3 m emissions through to invisible fires such as hydrogen. The IR Flame Detector is sensitive to flickering low frequency 1- 15Hz infra-red radiation emitted by flames during combustion even if the lens is contaminated by a layer of oil dust water vapour or ice.This detector has three IR sensors which respond to different IR wavelengths in order to discriminate between flames and spurious sources of radiation. False alarms from flickering sunlight are avoided by a combination of filters and signal processing techniques. The Talentum IR3 detector has selectable output options of relay contacts or 4-20mA signal as standard.Key FeaturesExcellent immunity to false sourcesTolerant of fumes vapours dust and mistSuitable for indoor and outdoor areasUnaffected by convection currents draughts or windProven response to multiple fuel typesMulti-spectrum detectionSelectable output optionsSelectable response speedSelectable sensitivity levelsBuilt in auto and manual testLow current consumptionFast response to fireApplicationsRefineriesCompressor StationsFuel Loading RacksChemical PlantsTunnelsWaste RecyclingNuclear Power SitesStorage TanksEngine RoomsSpray BoothsPharmaceutical ProductionMilitary ApplicationsMarine IndustryAircraft HangarsCoal HandlingPrintingPetrochemical OffshoreOnshoreLNGLPG ProductionBiomass Storage and Handling

GBP 2183.70
1