ProfitSpring | B2B PPC Agency

Talentum 16579-00 Triple IR Intrinsically Safe Flame Detector Head Unit

Talentum 16579-00 Triple IR Intrinsically Safe Flame Detector Head UnitThese flame detectors give excellent immunity to false flame sources both indoors or out. They have internal self-test sources that check the detectors operation when remotely instructed. They can operate on a conventional 2-wire 14-28 Vdc fire system or 4-20mA process control system. Relay contacts are also available for Fire and Fault signals. The detectors operation modes can be user selective giving a choice of alarm currents response times latch or non-latching outputs and sensitivity. The detectors have a maximum ambient operation temperature of 55 Celsius.Key FeaturesExcellent immunity to false sourcesSuitable for indoor and outdoor areasDetects invisible flames from fuels such as Hydrogen and other inorganic fuelsSelectable response speedOptical self-testLow power consumptionApproved to EN54-10 2002Applications Used OnAtriaCoal HandlingPharmaceuticalsPrintingSpray BoothsNuclear IndustryWaste TipsStorage TanksTunnels

GBP 2731.80

1

Talentum Dual IR Flame Detector 16581

Talentum Dual IR Flame Detector 16581These flame detectors give high immunity to false flame sources. They have internal self-test sources that check the detectors operation when remotely instructed. They can operate on a conventional 2-wire 14-28 Vdc fire systems or 4-20mA process control systems. Relay contacts are also available for Fire and Fault signals. The detectors operating modes can be user selected giving a choice of alarm currents response times latching or non-latching outputs and sensitivity. The detectors have a maximum ambient operating temperature of 55C.Key Features High immunity to false sources For applications with visible light present Detects invisible flames from fuels such as Hydrogen and other inorganic fuels Selectable response speed Optical self-test Low power consumption Approved to EN54-102002Applications Used On Churches Coal Handling Fume Cupboards Printing Spray Booths Textiles Waste Handling

GBP 1818.30

1

Talentum Dual IR Hazardous Area Flameproof Detector 16511

Talentum Dual IR Hazardous Area Flameproof Detector 16511These flame detectors give high immunity to false flame sources. They have internal self-test sources that check the detectors operation when remotely instructed.They can operate on a conventional 2-wire 14-28 Vdc fire systems or 4-20mA process control systems. Relay contacts are also available for Fire and Fault signals. The detectors operating modes can be user selected giving a choice of alarm currents response times latching or non-latching outputs and sensitivity. The detectors have a maximum ambient operating temperature of 55C.Key Features High immunity to false sources For applications with visible light present Detects invisible flames from fuels such as Hydrogen and other inorganic fuels Selectable response speed Optical self-test Low power consumption Approved to EN54-102002 IR2 Flame Detector RangeApplications Used On Churches Coal Handling Fume Cupboards Printing Spray Booths Textiles Waste Handling

GBP 2731.80

1

Talentum 16571-00 Dual IR Intrinsically Safe Detector

Talentum 16571-00 Dual IR Intrinsically Safe DetectorThese flame detectors give high immunity to false flame sources. They have internal self-test sources that check the detectors operation when remotely instructed.They can operate on a conventional 2-wire 14-28 Vdc fire systems or 4-20mA process control systems. Relay contacts are also available for Fire and Fault signals. The detectors operating modes can be user selected giving a choice of alarm currents response times latching or non-latching outputs and sensitivity. The detectors have a maximum ambient operating temperature of 55C.Key Features High immunity to false sources For applications with visible light present Detects invisible flames from fuels such as Hydrogen and other inorganic fuels Selectable response speed Optical self-test Low power consumption Approved to EN54-102002IR2 Flame Detector RangeApplications Used On Churches Coal Handling Fume Cupboards Printing Spray Booths Textiles Waste HandlingThese sensors have been approved by Baseefa notified body no 1180 to EN60079-0 EN60079-11 and EN60079-26.The requirements of Directive 949EC the ATmosphere EXplosives ATEX Directive have also been met.Apparatus Certificate Number BAS02ATEX1001System Certificate Number Baseefa08Y0078Certified toATEX II 1 GCENELECIEC Ga Ex ia IIC T4 Zones 0 1 2

GBP 2288.10

1

Talentum Air Purge for Standard Housing 12556

Talentum Air Purge for Standard Housing 12556Whilst the IR2 and IR3 types of Flame Detector can still work with contamination from dust or dirt for example on the sensor window their working range and sensitivity can be reduced. Cleaning the Flame Detector if it is high off the ground may be difficult and or expensive this is where the Flame Detector Air Purge kit comes in.By connecting an Air Line or Compressed Air Cylinder to the Air Purge hose the pressurized air can be used to clean the Flame Detectors sensor window. This can be done as and when required depending of the levels of contamination on the site to keep the Flame Detector working at its maximum capability.

GBP 408.90

1

Talentum Air Purge for Exd Housing 12555

Talentum Air Purge for Exd Housing 12555Whilst the IR2 and IR3 types of Flame Detector can still work with contamination from dust or dirt for example on the sensor window their working range and sensitivity can be reduced. Cleaning the Flame Detector if it is high off the ground may be difficult and or expensive this is where the Flame Detector Air Purge kit comes in.By connecting an Air Line or Compressed Air Cylinder to the Air Purge hose the pressurized air can be used to clean the Flame Detectors sensor window. This can be done as and when required depending of the levels of contamination on the site to keep the Flame Detector working at its maximum capability.

GBP 687.30

1

Talentum UV Dual IR Flame Detector Head Unit 16591

Talentum UV Dual IR Flame Detector Head Unit 16591These flame detectors give the highest immunity to false flame sources both indoors or out. They have internal self-test sources that check the detectors operation when remotely instructed. The maximum ambient temperature is normally 55 Celsius or 85 Celsius for the higher temperature specification detectors.Key FeaturesHighest immunity to false sourcesSuitable for indoor and outdoor areasDetects invisible flames from fuels such as hydrogen and other inorganic fuelsSelectable response speedOptical self-testLow power consumptionApproved to EN54-102002Applications Used OnAircraft hangarsEngine roomsEngine test facilitiesGeneratorsHigh voltage equipmentNuclear industryPower plantsStorage tanks

GBP 2409.90

1

Talentum Triple IR Flame Detector 16519

Talentum Triple IR Flame Detector 16519The sensor responds to low-frequency 1 to 15 Hz flickering IR radiation emitted from flames during combustion. IR flame flicker techniques enable the sensor to operate through a layer of oil dust water vapour or ice. Most other IR flame sensors respond to 4.3m light emitted by hydrocarbon flames. By responding to 1.0 to 2.7m light emissions from fires almost all flickering flames can be detected.Gas fires not visible to the naked eye e.g. hydrogen may also be detected. The triple IR photoelectric detectors IR responding to neighbouring IR wavelengths enable it to discriminate between flames and spurious sources of IR radiation. The combination of filters and signal processing allows the sensor to be used with a very low risk of false alarms in difficult situations characterised by factors such as flickering sunlight.Key FeaturesFireFault Pre-alarmRelay ContactsLatching or Non-latching4-20mAZones 1 21 2 and 22Ex tb IIIC T135C Db IP66 A21II 2GD Ex d IIC T4 GbATEX IECEx certifiedClass 1 Sensitivity to EN54-10 Detects 0.1m fire 25mExcellent Optical Interference ImmunitySelectable Output OptionsConventional 2 wireSelectable Response SpeedOptical Self TestLow Power ConsumptionLPCB CPD Approved to EN54-10

GBP 3279.90

1

Talentum 16589-00 Triple IR Flame Detector Unit

Talentum 16589-00 Triple IR Flame Detector UnitThe Talentum triple Infra-Red IR Flame Detector is designed to protect areas where open fires may be expected and detects almost all flames including hydrocarbon fires with 4.3 m emissions through to invisible fires such as hydrogen. The IR Flame Detector is sensitive to flickering low frequency 1- 15Hz infra-red radiation emitted by flames during combustion even if the lens is contaminated by a layer of oil dust water vapour or ice.This detector has three IR sensors which respond to different IR wavelengths in order to discriminate between flames and spurious sources of radiation. False alarms from flickering sunlight are avoided by a combination of filters and signal processing techniques. The Talentum IR3 detector has selectable output options of relay contacts or 4-20mA signal as standard.Key FeaturesExcellent immunity to false sourcesTolerant of fumes vapours dust and mistSuitable for indoor and outdoor areasUnaffected by convection currents draughts or windProven response to multiple fuel typesMulti-spectrum detectionSelectable output optionsSelectable response speedSelectable sensitivity levelsBuilt in auto and manual testLow current consumptionFast response to fireApplicationsRefineriesCompressor StationsFuel Loading RacksChemical PlantsTunnelsWaste RecyclingNuclear Power SitesStorage TanksEngine RoomsSpray BoothsPharmaceutical ProductionMilitary ApplicationsMarine IndustryAircraft HangarsCoal HandlingPrintingPetrochemical OffshoreOnshoreLNGLPG ProductionBiomass Storage and Handling

GBP 2183.70

1

Talentum 16521-00 UV IR2 Flame Detector Flameproof Exd

Talentum 16521-00 UV IR2 Flame Detector Flameproof ExdThe Talentum flameproof Ultra-Violet dual Infra-Red UVIR Flame Detector is designed to protect hazardous areas where open fires may be expected and detects almost all flames including hydrocarbon fires with 4.3 m emissions through to invisible fires such as hydrogen. The UVIR Flame Detector is sensitive to flickering low frequency 1-15Hz infra-red radiation emitted by flames during combustion. This detector has a UV sensor and two IR sensors which respond to different wavelengths of both the ultra-violet and the infra-red spectrum.The signals from these sensors are processed by the detector and checked for characteristics of a flame. The simultaneous detection of both the UV and the IR light by the sensors will signal an alarm. False alarms from flickering sunlight arc welding and lightning are eliminated by a combination of UV and dual IR signal processing techniques. The Talentum UVIR detector has selectable output options of relay contacts or 4-20mA signal as standard.Key FeaturesHighest immunity to false sourcesSolar blindTolerant of fumes vapours dust and mistSuitable for indoor and outdoor areasUnaffected by convection currents draughts or windProven response to multiple fuel typesMulti-spectrum detectionSelectable output optionsSelectable response speedSelectable sensitivity levelsBuilt in auto and manual testLow current consumptionFast response to fireApplicationsChemical PlantsNuclear Power SitesEngine RoomsSpray BoothsPharmaceutical ProductionMilitary ApplicationsMarine IndustryPrinting RefineriesFuel loading racksStorage tanksAircraft hangersPetrochemical onshoreoffshoreBiomass storage and handlingLNGLPG productionApprovalsATEXII 2GD Ex d IIC T6Zones 1 21 2 and 22Worldwide approvals include EN5410 with VdS and LPCB

GBP 3610.50

1

Brand

Merchant

Price (EUR)