ProfitSpring | B2B PPC Agency

Vesda Xtralis REDSTW100 Smoke Test Wire 100m

Vesda Xtralis REDSTW100 Smoke Test Wire 100m100m of test wire designed for wire burn testing.Hot Wire TestThere are a number of tests that can be used to commission a VESDA system. For data centres a hot wire test is best this test is based on 1 metre of test wire with a high electric load passing through it. As the wire heats and the insulation melts the VESDA detector will respond.Please note The REDSTW100 is equivalent to the 251-001.

GBP 34.58

1

Vesda VTT-10000-UK Test Transformer Wire Burn

Vesda VTT-10000-UK Test Transformer Wire BurnA VTT-10000-UK Test Transformer Wire Burn.

GBP 611.23

1

Vesda Xtralis Smoke Test Wire 100m 251-001

Vesda Xtralis Smoke Test Wire 100m 251-001100m of test wire designed for wire burn testing.Hot Wire TestThere are a number of tests that can be used to commission a VESDA system. For data centres a hot wire test is best this test is based on 1 metre of test wire with a high electric load passing through it. As the wire heats and the insulation melts the VESDA detector will respond.Please note The 251-001 is equivalent to the REDSTW100.

GBP 34.58

1

Vesda Xtralis OSP-003 OSID Acrylic Test Filter Pack of 10

Vesda Xtralis OSP-003 OSID Acrylic Test Filter Pack of 10Vesda Xtralis OSID Acrylic Test FilterKey FeaturesPack of 10

GBP 105.47

1

Vesda Xtralis OSP-004 Test Filter 10 Pk For OSID-R

Vesda Xtralis OSP-004 Test Filter 10 Pk For OSID-RA pack of 10 test filters designed for use with the OSID-R.

GBP 105.47

1

Vesda WHTAST025I-10 25mm White Air Sampling Test Point PACK OF 10

Vesda WHTAST025I-10 25mm White Air Sampling Test Point PACK OF 10WHTAST025I-10 25mm White Air Sampling Test Point PACK OF 10

GBP 65.77

1

Vesda Xtralis OSP-003-200 OSID Acrylic Test Filter Pack of 200

Vesda Xtralis OSP-003-200 OSID Acrylic Test Filter Pack of 200Vesda Xtralis OSID Acrylic Test FilterKey FeaturesPack of 200Pack of 10 available here.

GBP 1427.90

1

Vesda Xtralis 25mm White System Test Point PIP-018-W

Vesda Xtralis 25mm White System Test Point PIP-018-W Pack of 1025mm System Test Points are installed at the furthest point of the pipework and are used to introduce smoke in order to measure the time it takes for the smoke to reach the detectors. The maximum transport time is 120 seconds. They should always be connected withABS solvent cement.Key FeaturesMaterial ABSColour WhiteOperating temperature range -40C to 70CEN5425mmPack of 10Please note The PIP-018-W is equivalent to the WHTAST025I.

GBP 47.63

1

Xtralis OSID OSID-INST Installation Kit

Xtralis OSIDOSID-INSTInstallation KitThe OSID Installation Kit OSID-INST is used in commissioning and maintaining the correct operation of the OSID Smoke Detector.When the OSID system is installed over very large distances and in brightly lit areas it may be difficult to see the output laser from the OSID Laser Alignment Tool when commissioning the system. To aid in the alignment of the Imager and Emitter the Commissioning Aid reflector is provided. The reflector should be attached to the opposing unit that is not being aligned. For example if the Emitter is being aligned the reflector should be attached to the front cover of the Imager. Returning light to the user off the reflector from the laser alignment tool will be brighter and make it easier to determine if the unit being commissioned has been aligned correctly.For to see how to use the Intallation Kit please view the OSID Product Guide pages 35 - 38.The kit includesOSID Installation and Maintenance ManualOSID commissioning aid reflectorBlu-Tack adhesiveOSID smoke simulating test filterOSID cleaning clothOSID serial PC interface cableOSID laser alignment tool with three LR44 button cell batteries pre-installed

GBP 193.92

1

Vesda Xtralis VESDAnet Socket Kit VSP-003

Vesda Xtralis VESDAnet Socket Kit VSP-003The VSP-003 is a VESDAnet Socket Kit.

GBP 823.48

1

Vesda Xtralis VSP-1010 VESDA-E REL PCA Kit - VEA

Vesda Xtralis VSP-1010 VESDA-E REL PCA Kit - VEAA Vesda-E REL PCA Kit.

GBP 1803.25

1

Vesda Xtralis PIP-027 Air Sampling Test Point with Cap

Vesda XtralisPIP-027Air Sampling Test Point with CapThey are designed to measure the transportation time a small quantity of smoke is introduced at the furthest point and the measurement in time is calculated from when the smoke enters the sampling point to when the ASD reacts. The maximum transport time is 120 seconds 2 minutes. Test points are the ideal solution for flexibility and convenience. They are installed at the end of the pipe run however for areas such as a lift shaft where accessibility is limited the pipe run can be brought into a riser.A key element of the VESDA system is its suction system which actively transports air from the protected area to the detector.The test point is for periodic smoke testing of the VESDA system for hard to reach areas.VESDA installations can be designed for the most complex areas using carefully selected shaped elements.The use of these shaped elements has a positive effect on the pneumatic system of the installation which translates into the unique and legendary quality of the VESDA system work in each pneumatic system.The suction installation is calculated with theASPIREprogramme.The program is used for modelling and visualization of aspiration installations class calculation in accordance with PN-EN-54-20.Please note The PIP-027 is equivalent to the REDAST025C.

GBP 7.49

1

Vesda Xtralis WHTCSK Sample Point Kit Conical

Vesda Xtralis WHTCSK Sample Point Kit ConicalThis sample point kit is for use with white ABS pipe fittings. It comes complete with an ABS plain adaptor ceiling conical and nylon capillary tube.Key Features Tech SpecsMaterial ABS connection Nylon tubeColour WhiteOperating temperature range -40C to 70CEN54 testedPlease note The is equivalent to the 059-007-W.

GBP 17.58

1

Vesda Xtralis 25mm Air Sampling Test Point - Pack of 10

Vesda Xtralis 25mm Air Sampling Test Point - Pack of 10Air sampling test points allow for functional smoke testing of aspirating smoke detection systems and are typically located at the end of a sampling pipe network.VESDA provides the discreet detection required in heritage buildings by routing the sampling pipes in areas that are not visible from normal occupancy. Small-bore capillary pipes are used to provide detection at the required location. The room fabric often dictates the location of these capillary tubes. Hiding the capillary tubes behind light fittings blending in with ceiling paintings or forming part of the ceiling sculptures can all be used to provide invisible smoke detection.In high volume atria applications such as cathedrals capillary sample points can be routed into the area at intermediate vertical levels to good effect to overcome stratification. The higher potential sensitivity of the VESDA system means that less smoke is required at the sample points to provide an alarm condition.Key FeaturesOptimising performanceTough and durableChemical resistance propertiesCompatible with VESDA VESDA-E ICAM FAAST Airsense and SecuritonLightweightPack of 10Please note The PIP-018 is equivalent to the REDAST025I.

GBP 47.63

1

Vesda PIP-044 ASD Flush SPL PT KIT

Vesda PIP-044 ASD Flush SPL PT KITThe PIP-044 ASD Flush SPL PT KIT.

GBP 47.96

1

Vesda Xtralis Sample Point Kit Conical 059-001-W

Vesda Xtralis Sample Point Kit Conical 059-001-WThis sample point kit is for use with white ABS pipe fittings. It comes complete with an ABS plain adaptor ceiling flush point and nylon capillary tube.Key Features Tech SpecsMaterial ABS connection Nylon tubeColour WhiteOperating temperature range -40C to 70CEN54 testedPlease Note The 059-001-W is equivalent to the WHTFSK.

GBP 13.04

1

Vesda Xtralis Sample Point Kit Conical 059-007-W

Vesda Xtralis Sample Point Kit Conical 059-007-WThis sample point kit is for use with white ABS pipe fittings. It comes complete with an ABS plain adaptor ceiling conical and nylon capillary tube.Key Features Tech SpecsMaterial ABS connection Nylon tubeColour WhiteOperating temperature range -40C to 70CEN54 testedPlease note The 059-007-W is equivalent to the WHTCSK.

GBP 17.58

1

Vesda Xtralis VSP-1008 VESDA-E VEA Stainless Steel Sampling Duct Kit

Vesda Xtralis VSP-1008 VESDA-E VEA Stainless Steel Sampling Duct KitOpen Duct Arrangement Sampling points are designed for use in open duct application by using VSP-1008 duct mounting kit. In open duct application these sampling points can be mounted onto duct kit using simple nut arrangement and then entire assembly can be mounted into open duct. This arrangement is recommended for open duct sizes from 4 to 12.The VESDA-E VEA series of detectors combines VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional detectors. VEA detectors use air sampling points and multiple microbore air sampling tubes with three alarm sensitivity settings.The VESDA-E VEA stainless steel sampling point provides a more discreet smoke detection. Using a dedicated installation tool and perforated sampling area the VEA stainless steel sampling point provides a tamperproof solution that is ideal for correctional and educational applications.The low profile of the VEA stainless steel sampling point makes it ideal for installation in cabinets or narrow spaces.Fully interchangeable with the standard VSP-980 plastic sampling point the VEA stainless steel sampling point connects to 6mm VEA sampling tube via simple push fit connection to allow rapid and reliable installation.Patented VEA sampling point allows full tube integrity monitoring for centralised test and maintenance at the VEA detector significantly reducing ongoing maintenance time and cost.

GBP 89.81

1

Vesda Xtralis VSP-860 Refrigerated Storage Sampling Kit

Vesda Xtralis VSP-860 Refrigerated Storage Sampling KitThe Xtralis Refrigerated Storage Sampling Kit provides a standardised method of smoke sampling for Refrigerated Storage facilities in a considerably improved manner allowing simplified installation with reduced maintenance thus promoting more reliable and hassle-free operation.The Xtralis Refrigerated Storage Sampling Kit has been designed to replace standard cone-shaped sampling nozzles installed at the ceiling in existing or new Refrigerated Storage facilities. This kit can be installed in the entire facility or combined with standard sampling points if required.The aim here is to reduce direct ice blockage of the sampling points hence this kit is recommended for installation in areas where higher humidity is likely to occur as a result of vehicle and pedestrian traffic e.g. areas close to doorways or perimeter of the facility.Key FeaturesEnables the ASD pipe to be installed inspected and maintained outside the Refrigerated Storage facility hence enabling fire contractors to work in ambient conditions most of the timeSuited for facilities with and without ceiling cavitiesEliminates the need for expensive HDPE high density polyethylene pipe inside the Refrigerated Storage facilityEliminates the need for costly access equipment hire for on-going servicemaintenanceEliminates the need for heat tracingLess prone to blockage due to icingProvides a generally more robust ASD installation for these unique environmentsProvides considerably improved aestheticsMinimizes the need for Back Flush systemsOffers all round cost savings

GBP 100.93

1

Vesda Xtralis Flush Sampling Point Kit

Vesda Xtralis Flush Sampling Point KitFlush Sampling Point Kit consisting of Flush Sampling Point 2m of 10mm OD tube Plain Red ABS 25mm 90 Tee and connecting piece between 10mm OD tube and 25mm 90 Tee Key FeaturesMaterial ABS connection Nylon tubeColour RedOperating temperature range -40C to 70CEN54 testedKit Comes With2m of 10mm OD tubeTrunk AdaptorPoint and decalPlease note The 059-001 is equivalent to the redFSK.

GBP 13.04

1

Vesda Smoke Matches 12 per box 251-002

Vesda Smoke Matches 12 per box 251-002Smoke matches are used to test smoke detectors.Please Note The 251-002 is equivalent to the REDSM12.

GBP 2.52

1

Vesda PIP-038 ASD Quick Release Kit Air Line ABS 34quot

Vesda PIP-038 ASD Quick Release Kit Air Line ABS 34When the aspirating smoke detection system is installed in a dirty or dusty environment the sampling pipes and sampling holes can get obscured over a period of time by the various airborne particles. As a result it is recommend to clean the sampling pipes and holes by blowing low pressure compressed air in the reverse direction through the sampling pipes. The connection of the compressed air to the sampling pipe and the release of excess air at the end of the sampling pipe can be cumbersome.With introduction of the Quick Release Airline Valve 9-30976 the Large Check Valve 9-10978 and Large 2 Way Ball Valve 9-10980 this does not need to be the case anymore. The quick release airline valve is installed close to the detector. During maintenance the detector can be switched-off and the valve closed to prevent any damage to the detector during the clearing process. The low pressure compressed air can now be easily connected to the quick release.At the far end of the sampling pipe the large check valve or large 2 way ball valve can be used. The check value is the easiest to use as it will automatically open to release excess pressure during the cleaning process and does not require any human interaction. In some cases the check valve might not be suitable and then the 2 way ball valve can be used to manually open the far end of the sampling pipe.Key FeaturesEasy connection of airlineRobust ball valve to protect ASDFor use with 9-10978 - check valve

GBP 105.47

1

Vesda Sensepoint XCL XCL-VEA-CO-RA Carbon Monoxide CO 0-300PPM 4-20mA Relays

Vesda Sensepoint XCL XCL-VEA-CO-RA Carbon Monoxide C0 0-300PPM 4-20mA RelaysXtralis has developed with its sister company Honeywell Analytics a new concept of aspirated gas detectors. When used with the VESDA-E VEA VESDA Sensepoint XCL provides early warning of the presence of gases for occupant protection and system monitoring whilst at the same time ensuring protection against fire threats.Through its embedded Bluetooth interface VESDA Sensepoint XCL enables customers to pair the gas detector with their smart device applications to perform installation commissioning and maintenance. This ensures a faster VESDA Sensepoint XCL installation rapid configuration simplicity to operate and simplified maintenance.Key FeaturesAvailable SensorsCarbon Monoxide CO 0 1000ppmCombustible CAT 0 100 LEL Methane Hydrogen Propane Ethanol Butane Octane etc.Hydrogen H2 0 1000ppmCarbon Dioxide CO2 0 5.0 vvCarbon Dioxide CO2 0 5000ppmFactory calibrated detectors CAT Factory calibrated to CH4Integral alarm status LEDsBluetooth 4.0 Bluetooth Low EnergyIntegrates with PLCsHVACBMSFACPConfigurable relays4-20 mA analogue outputs or RS 485 Modbus output

GBP 1283.04

1

Vesda Sensepoint XCL XCL-VEA-CO-RA-5 Carbon Monoxide CO 0-300PPM 4-20mA Relays - Pack of 5

Vesda Sensepoint XCL XCL-VEA-CO-RA-5 Carbon Monoxide CO 0-300PPM 4-20mA Relays - Pack of 5Xtralis has developed with its sister company Honeywell Analytics a new concept of aspirated gas detectors. When used with the VESDA-E VEA VESDA Sensepoint XCL provides early warning of the presence of gases for occupant protection and system monitoring whilst at the same time ensuring protection against fire threats.Through its embedded Bluetooth interface VESDA Sensepoint XCL enables customers to pair the gas detector with their smart device applications to perform installation commissioning and maintenance. This ensures a faster VESDA Sensepoint XCL installation rapid configuration simplicity to operate and simplified maintenance.Key FeaturesAvailable SensorsCarbon Monoxide CO 0 1000ppmCombustible CAT 0 100 LEL Methane Hydrogen Propane Ethanol Butane Octane etc.Hydrogen H2 0 1000ppmCarbon Dioxide CO2 0 5.0 vvCarbon Dioxide CO2 0 5000ppmFactory calibrated detectors CAT Factory calibrated to CH4Integral alarm status LEDsBluetooth 4.0 Bluetooth Low EnergyIntegrates with PLCsHVACBMSFACPConfigurable relays4-20 mA analogue outputs or RS 485 Modbus output

GBP 5028.35

1

Vesda Sensepoint XCL XCL-VEA-CH4-RM Methane CH4 0-100 LEL Modbus amp Relays

Vesda Sensepoint XCL XCL-VEA-CH4-RM Methane CH4 0-100 LEL Modbus RelaysXtralis has developed with its sister company Honeywell Analytics a new concept of aspirated gas detectors. When used with the VESDA-E VEA VESDA Sensepoint XCL provides early warning of the presence of gases for occupant protection and system monitoring whilst at the same time ensuring protection against fire threats.Through its embedded Bluetooth interface VESDA Sensepoint XCL enables customers to pair the gas detector with their smart device applications to perform installation commissioning and maintenance. This ensures a faster VESDA Sensepoint XCL installation rapid configuration simplicity to operate and simplified maintenance.Key FeaturesAvailable SensorsCarbon Monoxide CO 0 1000ppmCombustible CAT 0 100 LEL Methane Hydrogen Propane Ethanol Butane Octane etc.Hydrogen H2 0 1000ppmCarbon Dioxide CO2 0 5.0 vvCarbon Dioxide CO2 0 5000ppmFactory calibrated detectors CAT Factory calibrated to CH4Integral alarm status LEDsBluetooth 4.0 Bluetooth Low EnergyIntegrates with PLCsHVACBMSFACPConfigurable relays4-20 mA analogue outputs or RS 485 Modbus output

GBP 1507.57

1

Brand

Merchant

Price (EUR)

Vesda Xtralis REDSTW100 Smoke Test Wire 100m

Vesda VTT-10000-UK Test Transformer Wire Burn

Vesda Xtralis Smoke Test Wire 100m 251-001

Vesda Xtralis OSP-003 OSID Acrylic Test Filter Pack of 10

Vesda Xtralis OSP-004 Test Filter 10 Pk For OSID-R

Vesda WHTAST025I-10 25mm White Air Sampling Test Point PACK OF 10

Vesda Xtralis OSP-003-200 OSID Acrylic Test Filter Pack of 200

Vesda Xtralis 25mm White System Test Point PIP-018-W

Xtralis OSID OSID-INST Installation Kit

Vesda Xtralis VESDAnet Socket Kit VSP-003

Vesda Xtralis VSP-1010 VESDA-E REL PCA Kit - VEA

Vesda Xtralis PIP-027 Air Sampling Test Point with Cap

Vesda Xtralis WHTCSK Sample Point Kit Conical

Vesda Xtralis 25mm Air Sampling Test Point - Pack of 10

Vesda PIP-044 ASD Flush SPL PT KIT

Vesda Xtralis Sample Point Kit Conical 059-001-W

Vesda Xtralis Sample Point Kit Conical 059-007-W

Vesda Xtralis VSP-1008 VESDA-E VEA Stainless Steel Sampling Duct Kit

Vesda Xtralis VSP-860 Refrigerated Storage Sampling Kit

Vesda Xtralis Flush Sampling Point Kit

Vesda Smoke Matches 12 per box 251-002

Vesda PIP-038 ASD Quick Release Kit Air Line ABS 34quot

Vesda Sensepoint XCL XCL-VEA-CO-RA Carbon Monoxide CO 0-300PPM 4-20mA Relays

Vesda Sensepoint XCL XCL-VEA-CO-RA-5 Carbon Monoxide CO 0-300PPM 4-20mA Relays - Pack of 5

Vesda Sensepoint XCL XCL-VEA-CH4-RM Methane CH4 0-100 LEL Modbus amp Relays

Powered by Cobiro