22 results (0,17075 seconds)

Show all filters

Brand

Colour

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Watco Safety Coat Food Safe Mid Blue, 2.5L

Watco Safety Coat Food Safe Mid Blue, 2.5L

Images for illustration purposes onlyWatco Safety Coat Food Safe uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry.This is an anti slip version of Watco Food Safe CoatingRecommended areas of useFood preparation environmentsCold food storage such as walk-in fridgesAreas where spillages sometimes occur, the finely textured surface is easier to clean than conventional 'gritty' surfacesFeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CSlip resistantExcellent chemical resistanceSteam cleanablePendulum Slip Test ValuesDry PTV Wet PTV65 Low slip potential 45 Low slip potential

GBP 209.99
1

Watco Food Safe Coating Mid Blue, 2.5L

Watco Food Safe Coating Mid Blue, 2.5L

Images for illustration purposes onlyWatco Food Safe Coating uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It is ideal for normal food preparation environments as well as cold food storage areas such as walk-in fridges. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry. FeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CExcellent chemical resistanceSteam cleanable

GBP 199.99
1

Watco Safety Coat Cold Cure Mid Blue, 2.5L

Watco Safety Coat Cold Cure Mid Blue, 2.5L

Images for illustration purposes onlyWatco Safety Coat Cold Cure is a new type of anti slip resin formulation that can be applied as low as minus 10C. This high performance coating can be applied in cold conditions where conventional coatings will fail to dry. It is most suited for use in heavily trafficked unheated areas such as workshops, warehouses, loading bays and cold stores. If a coarser textured finish is required for spillage areas or ramps, please see instead Watco Safety Grip Cold Cure (wet PTV 69) Safety Coat Cold Cure is extremely resistant to UV and has excellent resistance to weathering, making it a versatile, all year round coating. The finely textured particles are spherical; this makes it easier to keep clean compared to other anti slip coatings which contain a coarse, more angular type grit. Safety Coat Cold Cure carries CE Mark EN1504-2 and has impressive test results for slip resistance, abrasion and impact resistance, as well as for adhesion and hardness.Recommended areas of useWalk in fridges and freezerCold storesProduction areasLoading baysUnheated areasWarehouses and workshopsFeaturesHigh performance, two part, anti slip, polyaspartic resin formulationEasy clean, anti slip surfaceCan be applied at temperatures as low as -10C and as high as 25CExcellent resistance to UV and weatheringFast curing ready for heavy traffic in just 16 hoursSuperior abrasion and scratch resistanceExtremely strong easily copes with forklift trucksSuperior performance demonstrated by ISO testing to CE Mark EN1504-2

GBP 169.99
1

Watco Chemi-Coat Cold Cure Mid Blue, 4L

Watco Chemi-Coat Cold Cure Mid Blue, 4L

Images for illustration purposes onlyChemi-Coat Cold Cure is a one coat tough industrial paint with excellent durability and chemical resistance. It is suitable for a variety of floor surfaces as well as being solvent free. It provides a superb glossy, hygienic and easily cleaned surface and will cure at temperatures as low as 0C. It allows refrigeration areas and unheated warehousing to be painted and protected at any time of the year.FeaturesExcellent resistance to many chemicalsSuitable for a variety of floor and wall surfacesVirtually solvent freeReady for heavy traffic after 48 hours at 5C

GBP 299.99
1

Watco Fastcoat Anti Slip Mid Blue, 2.5L

Watco Fastcoat Anti Slip Mid Blue, 2.5L

Images for illustration purposes only Watco Fastcoat is a new type of resin formulation that allows you to have your floor cleaned, prepared and painted within a single day. Uniquely developed by Watcos paint chemists, Fastcoat is a revolution in floor coatings that has only been made possible by recent developments in polyaspartic resin technology. Our unique formulation uses this incredibly versatile resin to produce a high grade, high performance paint for heavily used areas both inside and outside. When applying Fastcoat Anti Slip, you will notice that the anti slip aggregate comes separately, which can easily be added when mixing. Both Fastcoat and Fastcoat Anti Slip carry CE Mark EN1504-2 and have impressive test results for abrasion and impact resistance, as well as for adhesion and hardness. Recommended areas of use Production Areas Warehouses Features Revolutionary, high performance, two part, polyaspartic resin formulation Exceptionally fast curing - apply 2 coats in one day to reduce downtime Extremely strong easily copes with very heavy traffic Superior abrasion and scratch and resistance Can be applied at low temperatures as low as -10C and as high as 25C Excellent resistance to UV and weathering Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance -10C 24 hours 16 hours 30 hours 72 hours 14 days 0C 12 hours 8 hours 16 hours 30 hours 14 days 10C 6 hours 4 hour 8 hours 16 hours 7 days 20C 4 hours 2 hour 6 hours 16 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 209.99
1

Watco Road Paint Rapid Mid Blue, 5L

Watco Road Paint Rapid Mid Blue, 5L

Images for illustration purposes onlyWatco Road Paint Rapid is a hard wearing one coat paint, that is ideal for coating exterior concrete and asphalt. It is showerproof in only one hour and can be applied at temperatures as low as 5C. Easy to apply by brush or roller and it offers exceptional wear resistance making it ideal for heavy traffic areas. FeaturesFast curing: showerproof in only 1 hourCan be applied at low temperaturesIdeal for busy areas

GBP 153.99
1

Watco Heavy Duty Traffic Paint Mid Blue, 4L

Watco Heavy Duty Traffic Paint Mid Blue, 4L

Images for illustration purposes onlyWatco Heavy Duty Traffic Paint is a tough, two pack, solvent based epoxy resin coating for use in heavily trafficked concrete or asphalt, such as car parks, driveways and vehicle access areas.This versatile, exceptionally strong coating contains a solvent which bites into asphalt surfaces, and slightly penetrates concrete surfaces for the maximum possible adhesion without the need (generally) for a primer. Heavy Duty Traffic Paint carries CE Mark EN 1504-2 and has impressive test results for slip resistance, hardness, abrasion, adhesion and impact resistance.The high pigment level in this smooth finish exterior coating offers excellent covering power to keep your surfaces looking their best for longer. For areas where safety underfoot is required, Heavy Duty Anti Slip Traffic Paint is also available.Recommended areas of useCar parksDrivewaysTraffic routes and pedestrian walkwaysVehicle access areasColour coding and highlighting hazardous areasFeaturesExceptionally strong, two pack, solvent based epoxy resinTransforms, dull, drab asphalt, tarmac and concrete in heavy wear areasColours and protects with just one coatHigh pigment level offers excellent hiding powerSuitable for both asphalt and concreteExcellent chemical resistanceSuperior performance demonstrated by ISO testing to CE Mark EN1504-2Drying Time Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 12 hours 6 hours 16 hours 36 hours 7 days20C 6 hours 4 hours 8 hours 24 hours 7 days30C 6 hours 3 hour 8 hours 24 hours 7 daysLight Traffic: FootMedium Traffic: Cars, trolley, pallet truck

GBP 179.99
1

Watco Epoxicote High Build Anti Slip Rapid Mid Blue, 4L EHBRASMBLU4

Watco Epoxicote High Build Anti Slip Rapid Mid Blue, 4L EHBRASMBLU4

Images for illustration purposes only Watco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed. The anti slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish. All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Very heavily trafficked floors Production areas Showrooms Warehouses Garages Receptions Oil & chemical areas Features Versions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti Slip One coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coat Glossy, attractive, easily cleaned finish Excellent resistance to oil and chemicals Low odour: safe to use in confined spaces Cures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2

GBP 299.99
1

6x Watco Epoxicote High Build Anti Slip Rapid Mid Blue, 4L

6x Watco Epoxicote High Build Anti Slip Rapid Mid Blue, 4L

Images for illustration purposes only Watco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed. The anti slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish. All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Very heavily trafficked floors Production areas Showrooms Warehouses Garages Receptions Oil & chemical areas Features Versions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti Slip One coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coat Glossy, attractive, easily cleaned finish Excellent resistance to oil and chemicals Low odour: safe to use in confined spaces Cures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2

GBP 1559.94
1

6x Watco Concrete Floor Paint Bef Anti Slip Mid Blue 5L Sky Blue Cfpaasmbl

6x Watco Concrete Floor Paint Bef Anti Slip Mid Blue 5L Sky Blue Cfpaasmbl

Images for illustration purposes only Our unique formula is based on a blend of resins and polyurethane, which produced a Best in Class single pack paint for general use. This attractive, hardwearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. Watco Concrete Floor Paint Anti Slip provides a good level of slip resistance and the anti slip particles are pre-blended which makes it easier to achieve a uniform finish. All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this Best Ever Formulation to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. Recommended areas of use Production Areas Warehouses Workshops Features Professional quality, single pack polyurethane coating Transforms and dustproofs drab, stained concrete Ideal for identifying production and storage areas and traffic aisles Easy to use and easy to keep clean Superior performance demonstrated by ISO testing to CE mark EN 1504-2 High Gloss, Matt & Anti Slip versions available Available in 190 RAL colours Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 24 hours 16 hours 48 hours 72 hours 20C 16 hours 10 hours 24 hours 36 hours 30C 16 hours 6 hour 24 hours 36 hours Light Traffic: Foot, trolley, pallet truck, occasional forklift

GBP 779.94
1

Watco Flexicoat Mid Blue, 2.5L

Watco Flexicoat Mid Blue, 2.5L

Images for illustration purposes onlyWatco Flexicoat is a polyaspartic formulation designed for floors which may be subject to slight movement or cracking. Flexicoat also has excellent waterproofing and chemical resistant properties, making it the ideal coating for plant, boiler rooms or bund areas, where equipment may leak.Polyaspartic paint technology means coatings deliver higher performance such as improved durability (strength, flexibility, and resistance) , the ability for the paint to dry at extremely low temperatures, and to cure very rapidly too. Other performance benefits include outstanding scratch and chemical resistance and exceptional resistance to UV fading. And unlike epoxy coatings, polyaspartics have increased flexible properties making them the right choice for industrial floors needing incredibly strong and long-lasting protection.Recommended areas of useIdeal for floors which can move slightly due to vibrating machineryFloors which expand due to heat and moisturePlant, boiler or bund areas where equipment may leakflexible mezzanine floorsFor concrete and at least 6 month old asphaltFeaturesPolyaspartic formulation for heavy wear areasFills and bridges small cracks to cut preparation timeFlexible coating resists movement caused by vibrating machinery, expansion and contraction, moisture, slight structural movementsHelps suppress noiseCan be steam cleanedGood chemical resistanceGood sealing and waterproofing propertiesideal as a flexible, waterproof coating in plant/boiler rooms etc. where equipment may leak

GBP 209.99
1

Watco Epoxicote High Build Cold Cure Mid Blue, 4L

Watco Epoxicote High Build Cold Cure Mid Blue, 4L

Images for illustration purposes onlyWatco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed.Epoxicote High Build Cold Cure can be applied in cold conditions and also comes in a slip resistant version.All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC.Recommended areas of useVery heavily trafficked floorsProduction areasShowroomsWarehousesGaragesReceptionsOil & chemical areasFeaturesVersions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti SlipOne coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coatGlossy, attractive, easily cleaned finishExcellent resistance to oil and chemicalsLow odour: safe to use in confined spacesCures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Temperature Recoat Time Touch Dry Light Traffic Full UseEpoxicote High Build & Anti Slip 10C20C30C 16 hours10 hours6 hours 12 hours6 hours4 hours 24 hours16 hours8 hours 48 hours48 hours16 hoursEpoxicote Cold Cure 5C10C20C30C 24 hours16 hours12 hours6 hours 16 hours12 hours6 hours4 hours 30 hours24 hours16 hours8 hours 72 hours48 hours48 hours16 hoursEpoxicote Rapid, Advanced, Advanced Anti Slip 10C20C30C 12 hours6 hours4 hours 8 hours4 hours3 hours 16hours8 hours6 hours 48 hours16hours16 hoursFull Chemical Resistance: 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 279.99
1

6x Watco Epoxicote High Build Cold Cure Mid Blue, 4L EHBCCMBLU4

6x Watco Epoxicote High Build Cold Cure Mid Blue, 4L EHBCCMBLU4

Images for illustration purposes onlyWatco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed.Epoxicote High Build Cold Cure can be applied in cold conditions and also comes in a slip resistant version.All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC.Recommended areas of useVery heavily trafficked floorsProduction areasShowroomsWarehousesGaragesReceptionsOil & chemical areasFeaturesVersions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti SlipOne coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coatGlossy, attractive, easily cleaned finishExcellent resistance to oil and chemicalsLow odour: safe to use in confined spacesCures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Temperature Recoat Time Touch Dry Light Traffic Full UseEpoxicote High Build & Anti Slip 10C20C30C 16 hours10 hours6 hours 12 hours6 hours4 hours 24 hours16 hours8 hours 48 hours48 hours16 hoursEpoxicote Cold Cure 5C10C20C30C 24 hours16 hours12 hours6 hours 16 hours12 hours6 hours4 hours 30 hours24 hours16 hours8 hours 72 hours48 hours48 hours16 hoursEpoxicote Rapid, Advanced, Advanced Anti Slip 10C20C30C 12 hours6 hours4 hours 8 hours4 hours3 hours 16hours8 hours6 hours 48 hours16hours16 hoursFull Chemical Resistance: 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 1559.94
1

Watco Epoxicote High Build Rapid Mid Blue, 4L

Watco Epoxicote High Build Rapid Mid Blue, 4L

Images for illustration purposes onlyWatco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed.All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC.Recommended areas of useVery heavily trafficked floorsProduction areasShowroomsWarehousesGaragesReceptionsOil & chemical areasFeaturesVersions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti SlipOne coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coatGlossy, attractive, easily cleaned finishExcellent resistance to oil and chemicalsLow odour: safe to use in confined spacesCures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Temparature Recoat Time Touch Dry Light Traffic Full UseEpoxicote High Build & Anti Slip 10C20C30C 16 hours10 hours6 hours 12 hours6 hours4 hours 24 hours16 hours8 hours 48 hours48 hours16 hoursEpoxicote Cold Cure 5C10C20C30C 24 hours16 hours12 hours6 hours 16 hours12 hours6 hours4 hours 30 hours24 hours16 hours8 hours 72 hours48 hours48 hours16 hoursEpoxicote Rapid, Advanced, Advanced Anti Slip 10C20C30C 12 hours6 hours4 hours 8 hours4 hours3 hours 16hours8 hours6 hours 48 hours16hours16 hoursFull Chemical Resistance: 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 279.99
1

6x Watco Epoxicote High Build Rapid Mid Blue, 4L EHBRMBLU4

6x Watco Epoxicote High Build Rapid Mid Blue, 4L EHBRMBLU4

Images for illustration purposes onlyWatco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed.All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC.Recommended areas of useVery heavily trafficked floorsProduction areasShowroomsWarehousesGaragesReceptionsOil & chemical areasFeaturesVersions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti SlipOne coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coatGlossy, attractive, easily cleaned finishExcellent resistance to oil and chemicalsLow odour: safe to use in confined spacesCures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Temparature Recoat Time Touch Dry Light Traffic Full UseEpoxicote High Build & Anti Slip 10C20C30C 16 hours10 hours6 hours 12 hours6 hours4 hours 24 hours16 hours8 hours 48 hours48 hours16 hoursEpoxicote Cold Cure 5C10C20C30C 24 hours16 hours12 hours6 hours 16 hours12 hours6 hours4 hours 30 hours24 hours16 hours8 hours 72 hours48 hours48 hours16 hoursEpoxicote Rapid, Advanced, Advanced Anti Slip 10C20C30C 12 hours6 hours4 hours 8 hours4 hours3 hours 16hours8 hours6 hours 48 hours16hours16 hoursFull Chemical Resistance: 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 1499.94
1

Watco Cold Set Coating Mid Blue, 2.5L

Watco Cold Set Coating Mid Blue, 2.5L

Images for illustration purposes onlyWatco Cold Set Coating uses the latest polyaspartic resin technology to provide a high quality, highly wear resistant coating that can be applied at low temperatures. It is ideal for refurbishment and maintenance in unheated areas during the winter months when conventional coatings will fail to dry.Recommended areas of useRefurbishment and maintenance in unheated areasAs a coating in walk-in fridges, cold stores and loading baysFeaturesWithstands heavy wear and tearExcellent chemical resistanceCan be applied between -10C and +30CFast curingExceptional UV resistance makes it ideal for exterior application as it resists chalking, weather and fading

GBP 209.99
1

6x Watco Epoxicote High Build Cold Cure Anti Slip Mid Blue, 4L EHBCCASMBLU4

6x Watco Epoxicote High Build Cold Cure Anti Slip Mid Blue, 4L EHBCCASMBLU4

Images for illustration purposes onlyWatco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed. The anti slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish.Epoxicote High Build Cold Cure can be applied in cold conditions and also comes in a slip resistant version.All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC.Recommended areas of useVery heavily trafficked floorsProduction areasShowroomsWarehousesGaragesReceptionsOil & chemical areasFeaturesVersions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti SlipOne coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coatGlossy, attractive, easily cleaned finishExcellent resistance to oil and chemicalsLow odour: safe to use in confined spacesCures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Temparature Recoat Time Touch Dry Light Traffic Full UseEpoxicote High Build & Anti Slip 10C20C30C 16 hours10 hours6 hours 12 hours6 hours4 hours 24 hours16 hours8 hours 48 hours48 hours16 hoursEpoxicote Cold Cure & Anti Slip 5C10C20C30C 24 hours16 hours12 hours6 hours 16 hours12 hours6 hours4 hours 30 hours24 hours16 hours8 hours 72 hours48 hours48 hours16 hoursEpoxicote Rapid, Advanced, Advanced Anti Slip 10C20C30C 12 hours6 hours4 hours 8 hours4 hours3 hours 16hours8 hours6 hours 48 hours16hours16 hoursFull Chemical Resistance: 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 1559.94
1

Watco Epoxicote High Build Cold Cure Anti Slip Mid Blue, 4L

Watco Epoxicote High Build Cold Cure Anti Slip Mid Blue, 4L

Images for illustration purposes onlyWatco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed. The anti slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish.Epoxicote High Build Cold Cure can be applied in cold conditions and also comes in a slip resistant version.All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC.Recommended areas of useVery heavily trafficked floorsProduction areasShowroomsWarehousesGaragesReceptionsOil & chemical areasFeaturesVersions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti SlipOne coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coatGlossy, attractive, easily cleaned finishExcellent resistance to oil and chemicalsLow odour: safe to use in confined spacesCures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Temparature Recoat Time Touch Dry Light Traffic Full UseEpoxicote High Build & Anti Slip 10C20C30C 16 hours10 hours6 hours 12 hours6 hours4 hours 24 hours16 hours8 hours 48 hours48 hours16 hoursEpoxicote Cold Cure & Anti Slip 5C10C20C30C 24 hours16 hours12 hours6 hours 16 hours12 hours6 hours4 hours 30 hours24 hours16 hours8 hours 72 hours48 hours48 hours16 hoursEpoxicote Rapid, Advanced, Advanced Anti Slip 10C20C30C 12 hours6 hours4 hours 8 hours4 hours3 hours 16hours8 hours6 hours 48 hours16hours16 hoursFull Chemical Resistance: 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 299.99
1

Watco Chemi-Coat Rapid Mid Blue, 4L

Watco Chemi-Coat Rapid Mid Blue, 4L

Images for illustration purposes onlyWatco Chemi-Coat Rapid is a high build, tough floor coating which hardens rapidly and has good resistance to spillages of a wide range of chemicals. FeaturesEasy to mix two part epoxy resin formulaCures rapidly to form a high build (250300 micron thick) glossy coatingHard wearing surface ideal for heavy use areasOnly one coat usually required (although rapid curing allows 2 coats to be applied in one day) Virtually solvent free formula which can be used over most existing paints and coatingsWill accept light traffic after 4 5 hours and normal traffic after 12 hours (at 20C) Approved for use on concrete with under floor heating systems (up to 30C surface temperature)

GBP 299.99
1

6x Watco Epoxicote High Build Anti Slip Mid Blue, 4L EHBASMBLU4

6x Watco Epoxicote High Build Anti Slip Mid Blue, 4L EHBASMBLU4

Images for illustration purposes only Watco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed. The anti slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish. All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Very heavily trafficked floors Production areas Showrooms Warehouses Garages Receptions Oil & chemical areas Features Versions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti Slip One coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coat Glossy, attractive, easily cleaned finish Excellent resistance to oil and chemicals Low odour: safe to use in confined spaces Cures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Temparature Recoat Time Touch Dry Light Traffic Full Use Epoxicote High Build & Anti Slip 10C 20C 30C 16 hours 10 hours 6 hours 12 hours 6 hours 4 hours 24 hours 16 hours 8 hours 48 hours 48 hours 16 hours Epoxicote Cold Cure 5C 10C 20C 30C 24 hours 16 hours 12 hours 6 hours 16 hours 12 hours 6 hours 4 hours 30 hours 24 hours 16 hours 8 hours 72 hours 48 hours 48 hours 16 hours Epoxicote Rapid, Advanced, Advanced Anti Slip 10C 20C 30C 12 hours 6 hours 4 hours 8 hours 4 hours 3 hours 16hours 8 hours 6 hours 48 hours 16hours 16 hours Full Chemical Resistance: 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 1559.94
1

Watco Epoxicote High Build Anti Slip Mid Blue, 4L

Watco Epoxicote High Build Anti Slip Mid Blue, 4L

Images for illustration purposes only Watco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed. The anti slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish. All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Very heavily trafficked floors Production areas Showrooms Warehouses Garages Receptions Oil & chemical areas Features Versions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti Slip One coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coat Glossy, attractive, easily cleaned finish Excellent resistance to oil and chemicals Low odour: safe to use in confined spaces Cures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Temparature Recoat Time Touch Dry Light Traffic Full Use Epoxicote High Build & Anti Slip 10C 20C 30C 16 hours 10 hours 6 hours 12 hours 6 hours 4 hours 24 hours 16 hours 8 hours 48 hours 48 hours 16 hours Epoxicote Cold Cure 5C 10C 20C 30C 24 hours 16 hours 12 hours 6 hours 16 hours 12 hours 6 hours 4 hours 30 hours 24 hours 16 hours 8 hours 72 hours 48 hours 48 hours 16 hours Epoxicote Rapid, Advanced, Advanced Anti Slip 10C 20C 30C 12 hours 6 hours 4 hours 8 hours 4 hours 3 hours 16hours 8 hours 6 hours 48 hours 16hours 16 hours Full Chemical Resistance: 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 279.99
1

Watco Fastcoat Mid Blue, 2.5L

Watco Fastcoat Mid Blue, 2.5L

Images for illustration purposes only Watco Fastcoat is a new type of resin formulation that allows you to have your floor cleaned, prepared and painted within a single day. Uniquely developed by Watcos paint chemists, Fastcoat is a revolution in floor coatings that has only been made possible by recent developments in polyaspartic resin technology. Our unique formulation uses this incredibly versatile resin to produce a high grade, high performance paint for heavily used areas both inside and outside. Recommended areas of use Production Areas Warehouses Features Revolutionary, high performance, two part, polyaspartic resin formulation Exceptionally fast curing - apply 2 coats in one day to reduce downtime Extremely strong easily copes with very heavy traffic Superior abrasion and scratch resistance Can be applied at low temperatures as low as -10C and as high as 25C Excellent resistance to UV and weathering Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance -10C 24 hours 16 hours 30 hours 72 hours 14 days 0C 12 hours 8 hours 16 hours 30 hours 14 days 10C 6 hours 4 hour 8 hours 16 hours 7 days 20C 4 hours 2 hour 6 hours 16 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 199.99
1