871 results (0,13941 seconds)

Show all filters

Brand

Colour

Show all

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Watco Polyaspartic Primer 2.5L

Watco Polyaspartic Primer 2.5L

Images for illustration purposes only Watco Polyaspartic Primer is a unique, two part resin that has been specially designed prior to using Watcos range of polyaspartic coatings. When applied by roller, Polyaspartic Primer primes and seals very porous or high suction surfaces, such as sand and cement screed, to ensure a uniform finish and help prevent air entrapment bubbles in the subsequent coating. Polyaspartic Primer cures quickly and can be overcoated in 4 hours. This product can also be beneficial when overcoating an existing, well-bonded paint before using a Watco Polyaspartic coating as a top coat. Use with the following Watco products: Cold Set Coating, Fastcoat, Food Safe Coating, Protecta-Coat, Safety Coat Cold Cure and Safety Coat Food Safe. Recommended areas of use Production areas Warehouses Showrooms Workshops Loading bays Cold stores, walk-in fridges and freezers Interior and exterior Features Primes and seals porous, dusty floors prior to painting Can be used at minus 10C to 25C Ready to overcoat in 4 hours Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Curing time (Floor temperature) Recoat time Touch dry -10C 24 hours 16 hours 0C 12 hours 8 hours 10C 6 hours 4 hours 20C 4 hours 2 hours

GBP 159.99
1

Watco Powerfloat Primer Rapid 5L

Watco Powerfloat Primer Rapid 5L

Images for illustration purposes only Enables coatings to be applied to hard, smooth surfaces which would usually reject paint. Avoid using any coating which includes a strong solvent. For more information, please download a product datasheet from the quick links below. Recommended areas of use Priming power floated, very smooth or non porous concrete floors which are prone to rejecting paint Clear Powerfloat Primer can be used on clear ceramic tiles before application of Watco Protecta-Coat Features Powerfloat Primer Rapid curing times: With Watco Epoxy Gloss Coat/Safety Coat: Allow the primer to dry for 3 hours at 15-20C, but no longer than 36 hours, before overcoating With Watco Concrete Floor Paint/Flexicoat and Flexigrip: Allow the primer to dry for at least 5 days before overcoating With Watco Polyaspartic Coatings: Allow the primer to dry for at least 3 hours at 15-20C but no longer than 36 hours before overcoating

GBP 169.99
1

Watco Anti Fatigue Mat Safety, 0.9 M X Linear M

Watco Anti Fatigue Mat Safety, 0.9 M X Linear M

Images for illustration purposes onlyWatco Anti Fatigue Mat is available inGreyBlackSafetyRecommended areas of useDry production areasAssembly linesPacking benchesFeaturesAnti-fatigue matting manufactured from 100% closed cell vinyl foamPebble surface gives slip resistance in dry environmentsHelps minimise the effects of standing on cold, hard concrete floors, improving blood circulation and reducing pressure on the feet, legs and back

GBP 99.99
1

Watco PFP5 Powerfloat Primer 5L

Watco PFP5 Powerfloat Primer 5L

Images for illustration purposes only Enables coatings to be applied to hard, smooth surfaces which would usually reject paint. Avoid using any coating which includes a strong solvent. For more information, please download a product datasheet from the quick links below. Recommended areas of use Priming power floated, very smooth or non porous concrete floors which are prone to rejecting paint Clear Powerfloat Primer can be used on clear ceramic tiles before application of Watco Protecta-Coat Features Primes hard, smooth surfaces ready for painting Eliminates the need for costly shot blasting or grinding One coat application: quick and easy to apply Low odour Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Easily applied by roller Curing times: The following is based on good ventilation and a floor temperature of 15 -20C With all epoxy coatings such as Watco Epoxy Gloss Coat or Safety Coat: Allow the Primer to dry for 16 hours, but no longer than 72 hours before overcoating With Watco Concrete Floor Paint, Flexicoat and Safety Grip Flex: Allow the Primer to dry for at least 5 days before overcoating With polyaspartic coatings such as Cold Set Coating or Safety Coat Cold Cure: Allow the primer to dry for at least 16 hours but no longer than 72 hours before overcoating

GBP 153.99
1

Watco Powerfloat Primer 5L, Clear

Watco Powerfloat Primer 5L, Clear

Images for illustration purposes only Enables coatings to be applied to hard, smooth surfaces which would usually reject paint. Avoid using any coating which includes a strong solvent. For more information, please download a product datasheet from the quick links below. Recommended areas of use Priming power floated, very smooth or non porous concrete floors which are prone to rejecting paint Clear Powerfloat Primer can be used on clear ceramic tiles before application of Watco Protecta-Coat Features Primes hard, smooth surfaces ready for painting Eliminates the need for costly shot blasting or grinding One coat application: quick and easy to apply Low odour Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Easily applied by roller Curing times: The following is based on good ventilation and a floor temperature of 15 -20C With all epoxy coatings such as Watco Epoxy Gloss Coat or Safety Coat: Allow the Primer to dry for 16 hours, but no longer than 72 hours before overcoating With Watco Concrete Floor Paint, Flexicoat and Safety Grip Flex: Allow the Primer to dry for at least 5 days before overcoating With polyaspartic coatings such as Cold Set Coating or Safety Coat Cold Cure: Allow the primer to dry for at least 16 hours but no longer than 72 hours before overcoating

GBP 154.99
1

Watco Bubble Anti-Fatigue Mat Black/Yellow 0.6m X 0.9m Mid

Watco Bubble Anti-Fatigue Mat Black/Yellow 0.6m X 0.9m Mid

Images for illustration purposes onlyIdeal for manufacturing production areas where employees are standing in static positions. Features a raised bubbled surface to stimulate blood circulation. FeaturesAvailable as complete mats with yellow bevel edges or interlocking sections for longer runsResistant to oils and chemicalsMost suited to predominatly dry areasCan be used from -30C to +50CBubblemat is made of 100% natural rubber

GBP 163.99
1

Watco Bubble Anti-Fatigue Mat Black/Yellow 0.6m X 0.9m End

Watco Bubble Anti-Fatigue Mat Black/Yellow 0.6m X 0.9m End

Images for illustration purposes onlyIdeal for manufacturing production areas where employees are standing in static positions. Features a raised bubbled surface to stimulate blood circulation. FeaturesAvailable as complete mats with yellow bevel edges or interlocking sections for longer runsResistant to oils and chemicalsMost suited to predominatly dry areasCan be used from -30C to +50CBubblemat is made of 100% natural rubber

GBP 163.99
1

Watco Firm-Step Standard Cover Coarse 3000mm X 345mm Black Yellow

Watco Firm-Step Standard Cover Coarse 3000mm X 345mm Black Yellow

Images for illustration purposes onlySuitable for exterior and interior use, our Firm-StepStandard GRP Step Covers provide an affordable and versatile solution for slippery steps in areas of medium foot traffic, and can be fitted to concrete, timber, brick, metal and stone. Available in black and yellow, the edges of the steps are highlighted for enhanced safety. These 55mm DDA compliant stair covers are tough and chemical resistant which make them suitable for industrial and commercial use, including fire escapes and all types of staircases.Recommended areas of useSuitable for concrete, wood, stone, tiles and metal surfacesFeaturesIndependently tested for slip resistanceAvailable in a range of standard sizes or take advantage of our free cut to size serviceScrews, fixing plugs and a free pre-drilling service are available if required. Alternatively, we suggest Watco UltraBond Tape and Primer to bond the tread to dry indoor stepsPendulum Slip Test ValuesTop Surface Dry PTV Wet PTVCoarse Grit 71 Extremely low slip potential 63 Extremely low slip potential

GBP 169.99
1

Watco Firm-Step Standard Cover Coarse 1500mm X 345mm Black Yellow

Watco Firm-Step Standard Cover Coarse 1500mm X 345mm Black Yellow

Images for illustration purposes onlySuitable for exterior and interior use, our Firm-StepStandard GRP Step Covers provide an affordable and versatile solution for slippery steps in areas of medium foot traffic, and can be fitted to concrete, timber, brick, metal and stone. Available in black and yellow, the edges of the steps are highlighted for enhanced safety. These 55mm DDA compliant stair covers are tough and chemical resistant which make them suitable for industrial and commercial use, including fire escapes and all types of staircases.Recommended areas of useSuitable for concrete, wood, stone, tiles and metal surfacesFeaturesIndependently tested for slip resistanceAvailable in a range of standard sizes or take advantage of our free cut to size serviceScrews, fixing plugs and a free pre-drilling service are available if required. Alternatively, we suggest Watco UltraBond Tape and Primer to bond the tread to dry indoor stepsPendulum Slip Test ValuesTop Surface Dry PTV Wet PTVCoarse Grit 71 Extremely low slip potential 63 Extremely low slip potential

GBP 99.99
1

Watco Firm-Step Standard Cover Coarse 2000mm X 345mm Black Yellow

Watco Firm-Step Standard Cover Coarse 2000mm X 345mm Black Yellow

Images for illustration purposes onlySuitable for exterior and interior use, our Firm-StepStandard GRP Step Covers provide an affordable and versatile solution for slippery steps in areas of medium foot traffic, and can be fitted to concrete, timber, brick, metal and stone. Available in black and yellow, the edges of the steps are highlighted for enhanced safety. These 55mm DDA compliant stair covers are tough and chemical resistant which make them suitable for industrial and commercial use, including fire escapes and all types of staircases.Recommended areas of useSuitable for concrete, wood, stone, tiles and metal surfacesFeaturesIndependently tested for slip resistanceAvailable in a range of standard sizes or take advantage of our free cut to size serviceScrews, fixing plugs and a free pre-drilling service are available if required. Alternatively, we suggest Watco UltraBond Tape and Primer to bond the tread to dry indoor stepsPendulum Slip Test ValuesTop Surface Dry PTV Wet PTVCoarse Grit 71 Extremely low slip potential 63 Extremely low slip potential

GBP 119.99
1

Watco Concrex Coving Mortar 5KG

Watco Concrex Coving Mortar 5KG

Images for illustration purposes onlyA coved skirting helps cleaning by eliminating the dirt trap at the junction of the floor and the wall. Watco Concrex Coving Mortar is specially formulated to make it easier to create coved skirting. Based on the technology of Watco Concrex, this mortar is incredibly tough, chemical and impact resistant, even when applied with feather edges. Designed to be used in conjunction with Watco Tack Coat. Pendulum Slip Test ValuesDry PTV Wet PTV70 Extremely low slip potential 62 Low slip potential Recommended areas of useHygienic environments such as hospitals and food hallsBund areasClean rooms and laboratoriesFeaturesTough two pack epoxy resin formulaCan be feather edgedImpervious, non-dusting, impact and chemical resistantFast curingCures in 3 to 6 hours at 15-20cWatco Tack Coat is recommended for all applications

GBP 133.99
1

Watco Dampguard Advanced Warm White 3L

Watco Dampguard Advanced Warm White 3L

Images for illustration purposes only Watco Dampguard Advanced is a solvent free, penetrative, epoxy resin coating for damp proofing floors and walls in a variety of internal locations. Provides a hard wearing and chemical resistant surface which resists fungal or bacterial growth. Recommended areas of use Walls Ceilings Floors in hospitals Kitchens Food storage areas Dairies, laundries Cellars Inspection pits and tunnels Features May be used in confined areas Microporous to allow moisture vapour to escape from substrate Can be used on walls or floors Decorates and proofs in one Virtually odour free Emulsion paint can be applied to Watco Dampguard Advanced since it is generally permeable to moisture vapour. The Dampguard Advanced surface should be abraded to provide a key. Carpet may be laid over Dampguard Advanced but not bonded down since the adhesive will not allow the substrate to breathe.

GBP 159.99
1

Watco Dampguard 5L, White

Watco Dampguard 5L, White

Images for illustration purposes only Watco Dampguard is ideal for basements or any area where there is a damp problem. Applied as two coats, the first coat primes, the second provides a damp proof, wipe clean finish which will resist mildew growth. Features Prevents water seepage through cement, masonry, concrete block walls and basement floor slabs Resists up to 2 bar of water pressure - twice the strength of latex waterproofers Fast drying - recoatable in 4 hours Can be applied to dry or damp surfaces Provides an attractive, white easily cleaned surface

GBP 119.99
1

Watco Moisture Guard Anti-Condensation Paint - 5L

Watco Moisture Guard Anti-Condensation Paint - 5L

Watco Moisture Guard is a high performance, water based, acrylic paint designed to enhance and protect interior surfaces. This anti condensation paint is ideal for areas with persistent humidity, constant temperature fluctuations, insufficient air movement, or other environmental conditions, which can attack the paint film resulting in mould and mildew growth.* Moisture Guard is extremely easy to mix and apply with no sanding or priming required. The satin finish is also scrubbable and moisture resistant, making it easier to keep your surfaces clean. *Moisture Guard contains a biocide to protect the dry film from fungal degradation. Once dried the paint is classed as a treated article and contains a surface biocide 4, 5-dichloro-2-n-octyl-4- isothiazoline-3-one.

GBP 103.99
1