ProfitSpring | B2B PPC Agency

Windrose Jewelry Bag Beluga - Black

The classically elegant jewelry boxes of the Beluga collection are made of high-quality cowhide. The interior of the caskets is lined with soft velvet suede, making it a stylish and safe place to store your jewelry. Watches and jewelry shown are not included.

EUR 65.00

1

Watchwell Watch Winder Gamma V1 - Black

The combination of curves and corners gives the watch winder Gamma a unique character. A discreetly integrated LED lighting at the 12 o'clock position provides attractive light reflections during rotation and sets the automatic watch elegantly in scene. The LED goes out in rest phases. By pressing the "Mode" button you can switch between four available programs. The change of program is visually accompanied by an adjustment of the colored backlit logo. The plexiglass window that swings open to the front protects against dust and dirt. The watch is mounted on a soft cushion, which provides a support surface of up to 60mm diameter. Depending on which side you pull the watch over the cushion, the diameter is 200-220mm. Thanks to the soft cushion, the watch winder is also suitable for automatic watches with a small wrist circumference. The drive of the watch winder is done by a motor, which optionally executes one of the following four programs: A) Red: about 1440 revolutions right B) Green: approx. 1440 rotations right C) Yellow: approx. 5760 revolutions alternating D) Blue: approx. 2152 revolutions alternating The power supply is provided by the power supply unit with attachments for the EU, UK and USA included in the scope of delivery. The clocks shown are not included in the scope of delivery. Customers from non-European countries please note that in addition to the pure product weight a surcharge of 40% must be considered.

EUR 59.90

1

Watchwell Watch Winder Devo - Black/Black

This watch winder is thanks to its small design the ideal companion when travelling. Despite the small design, this watch winder has 12 different programs for winding automatic watches. The watch is protected from dust and dirt behind a plexiglass disc that can be swung down to the front. The attachment of the wristwatch is made on a flexible adjustable watch clasp (approx. 150-200mm). Two "noses" located on the watch clasp ensure that the watch is locked in the watch winder. The contact surface of the watch clasp is approx. 55mm. Since the watch clasp does without lateral limitation, even large watches find room without problems. The rotation of the watch in the watch winder is done by the individually programmable motor, which runs through one of twelve available programs. By means of a slide control on the back of the watch winder, the rotation directions (right, left or alternating) or the number of revolutions per day can be stored. A) Approx. 650 revolutions per day B) Approx. 900 revolutions per day C) Approx. 1200 revolutions per day D) Approx. 1500 revolutions per day The power supply is provided by the power supply unit with attachments for the EU, UK and USA included in the scope of delivery. The clocks shown are not included in the scope of delivery. Customers from non-European countries please note that in addition to the pure product weight a surcharge of 40% must be considered.

EUR 59.90

1

Watchwell Watch Winder Luxor - Black/Carbon

Extraordinary in design and function. The Luxor watch winder is an excellent choice for owners of two automatic watches who value individual programming. The watches are protected from dust and protection behind a plexiglass window that can be swung down to the front. The attachment of the wristwatches is made on a flexible adjustable watch clasp (approx. 150-200mm). Two "noses" located on the watch clasp ensure that the watches are locked in the watch winder. The contact surface of the watch clasp is approx. 55mm. Since the watch clasp does without lateral limits, even watches with larger case diameter can be attached without problems. The rotation of the watches in the watch winder is done by individually programmable motors, which run through one of twelve available programs. By means of slide controls on the top of the watch winder, the rotation directions (right, left or alternating) are determined. Further sliders allow the rotations per day as follows: A) Approx. 650 revolutions per day B) Approx. 900 revolutions per day C) Approx. 1200 revolutions per day D) Approx. 1500 revolutions per day The power supply is provided by the power supply unit with attachments for the EU, UK and USA included in the scope of delivery. The clocks shown are not included in the scope of delivery. Customers from non-European countries please note that in addition to the pure product weight a surcharge of 40% must be considered.

EUR 109.90

1

Watchwell Watch Winder Avior V1 - Carbon

The watch winder Avior is the perfect choice for all those who do not want to deal with complicated programs, but prefer a simple "plug and play" solution. By moving the button on the top or back of the watch winder, the rotation of the watch winder starts to the left or right. The automatic watch is protected from dust and protection behind a Plexiglas panel. The attachment of the watch is on a watch clasp (approx. 150-200mm) which can be flexibly adjusted in the circumference. Two "noses" located on the watch clasp provide a locking mechanism in the watch winder. The bearing surface for the watch case is approx. 55mm. Since the watch clasp has no lateral limitation, even large watches can be easily attached to it. The drive of the watch winder is done by a motor, which can optionally run through one of the following two cycles: a) One-hour rotation to the right followed by a three-hour break - repeating b) One hour rotation to the left followed by a three hour break - repetitive The power supply is provided by the power supply unit with attachments for the EU, UK and USA included in the scope of delivery. The clocks shown are not included in the scope of delivery. Customers from non-European countries please note that in addition to the pure product weight a surcharge of 40% must be considered.

EUR 49.90

1

Watchwell Watch Winder Luxor - Silver/Black

Extraordinary in design and function. The Luxor watch winder is an excellent choice for owners of two automatic watches who value individual programming. The watches are protected from dust and protection behind a plexiglass window that can be swung down to the front. The attachment of the wristwatches is made on a flexible adjustable watch clasp (approx. 150-200mm). Two "noses" located on the watch clasp ensure that the watches are locked in the watch winder. The contact surface of the watch clasp is approx. 55mm. Since the watch clasp does without lateral limits, even watches with larger case diameter can be attached without problems. The rotation of the watches in the watch winder is done by individually programmable motors, which run through one of twelve available programs. By means of slide controls on the top of the watch winder, the rotation directions (right, left or alternating) are determined. Further sliders allow the rotations per day as follows: A) Approx. 650 revolutions per day B) Approx. 900 revolutions per day C) Approx. 1200 revolutions per day D) Approx. 1500 revolutions per day The power supply is provided by the power supply unit with attachments for the EU, UK and USA included in the scope of delivery. The clocks shown are not included in the scope of delivery. Customers from non-European countries please note that in addition to the pure product weight a surcharge of 40% must be considered.

EUR 99.90

1

Watchwell Watch Winder Castor - Carbon

The watch winder Castor is available in different color versions. The discreetly integrated LED lighting at the 12 o'clock position provides attractive light reflections during rotation and elegantly sets the automatic watches in the watch winder in scene. The door which swings open to the side with integrated viewing window made of plexiglass protects the watches from dust and dirt. The wristwatches are fastened to a watch clasp (approx. 150-200mm) which can be flexibly adjusted in circumference. Two "noses" located on the watch clasp ensure that the watches are locked in the watch winder. The bearing surface for the watch case is approx. 55mm. Since the watch clasp does without lateral limits, even large watches can be attached without problems. The rotation of the watches in the watch winder is done by a motor, which runs through one of twelve available programs. Different programs per watch cannot be stored. The rotation direction (right, left or alternating) is determined by a slide control on the back. A further slider allows to store revolutions per day: A) Approx. 350 revolutions per day B) Approx. 850 revolutions per day C) Approx. 1100 revolutions per day D) Approx. 2150 revolutions per day The power supply is provided by the power supply unit with attachments for the EU, UK and USA included in the scope of delivery. The clocks shown are not included in the scope of delivery. Customers from non-European countries please note that in addition to the pure product weight a surcharge of 40% must be considered.

EUR 69.90

1

Watchwell Watch Winder Modena - Black / Blue LED

The watch winder Modena with four individually programmable motors is the ideal choice for collectors of small watch collections. The rounded housing gives the watch winder a sporty, elegant appearance, which can be easily integrated into any living environment. The almost invisible blue LED lighting integrated in the centre of the watch winder creates a special ambience that can be switched on and off at the touch of a button. The plexiglass door that swings open to the side protects the watches inside from dust and dirt. The wristwatches are attached to a watch clasp (approx. 150-200mm) which can be flexibly adjusted in circumference. Two "noses" located on the watch clasp ensure that the watches are locked in the watch winder. The contact surface of the watch clasp is approx. 55mm. Since the watch clasp does without lateral limits, even large watches can be attached without problems. The rotation of the watches in the watch winder is done by individually programmable motors, which run through one of twelve available programs. By means of a slide control on the back, the rotation directions (right, left or alternating) are determined. Further controls allow to store the revolutions per day: A) Approx. 650 revolutions per day B) Approx. 900 revolutions per day C) Approx. 1200 revolutions per day D) Approx. 1500 revolutions per day The power supply is provided by the power supply unit with attachments for the EU, UK and USA included in the scope of delivery. Shown clocks are not included in the scope of delivery. Customers from non-European countries please note that in addition to the pure product weight a surcharge of 40% must be considered.

EUR 134.99

1

Watchwell Watch Winder Globe V1 - Black

The watch winder Globe resembles in its appearance that of a planet. Thanks to its round shape and small size, the watch winder is often used as a travel companion. A semi-circular blue LED lighting puts the automatic watch in the watch winder during the rotation especially in scene. The LED goes out in rest phases. If the lighting is not desired, it can be permanently disabled by a slider on the back of the watch winder. The attachment of the watch is made on a flexible adjustable watch clasp (approx. 150-200mm). Two "noses" located on the watch clasp provide for a locking in the watch winder. The contact surface of the watch clasp is approx. 55mm. Since the watch clasp has no lateral limitation, even watches with larger case diameter can be attached to it without any problems. The drive of the watch winder is done by a motor, which runs through one of twelve available programs. The direction of rotation (right, left or alternating) is determined by a slider on the back. Another slider allows to store revolutions per day: A) Approx. 350 revolutions per day B) Approx. 850 revolutions per day C) Approx. 1100 revolutions per day D) Approx. 2150 revolutions per day The power supply is provided by the power supply unit with attachments for the EU, UK and USA included in the scope of delivery. Shown clocks are not included in the scope of delivery. Customers from non-European countries please note that in addition to the pure product weight a surcharge of 40% must be considered.

EUR 59.95

1

Watchwell Watch Winder Globe Shine - White

The watch winder Globe resembles in its appearance that of a planet. Thanks to its round shape and small size, the watch winder is often used as a travel companion. A semi-circular blue LED lighting puts the automatic watch in the watch winder during the rotation especially in scene. The LED goes out in rest phases. If the lighting is not desired, it can be permanently disabled by a slider on the back of the watch winder. The attachment of the watch is made on a flexible adjustable watch clasp (approx. 150-200mm). Two "noses" located on the watch clasp provide for a locking in the watch winder. The contact surface of the watch clasp is approx. 55mm. Since the watch clasp has no lateral limitation, even watches with larger case diameter can be attached to it without any problems. The drive of the watch winder is done by a motor, which runs through one of twelve available programs. The direction of rotation (right, left or alternating) is determined by a slider on the back. Another slider allows to store revolutions per day: A) Approx. 350 revolutions per day B) Approx. 850 revolutions per day C) Approx. 1100 revolutions per day D) Approx. 2150 revolutions per day The power supply is provided by the power supply unit with attachments for the EU, UK and USA included in the scope of delivery. Shown clocks are not included in the scope of delivery. Customers from non-European countries please note that in addition to the pure product weight a surcharge of 40% must be considered.

EUR 47.90

1

Heisse & Söhne Watch Roll Vintage - Black

Watch Roll Vintage 1 by Heisse & Söhne: The optimal solution for watch storage The Watch Roll Vintage 1 from Heisse & Söhne is an excellent choice for those seeking a safe and stylish place for their watch. With this product, your watch has a secure place and is well protected. Whether you are simply looking for a place to store your watch or want to transport it safely during your travels - the Watch Roll Vintage 1 has been designed and manufactured to provide the perfect solution for all these requirements. Processing and Materials The outer layer is made of high-quality fine synthetic material that ensures that the content is always safe and protected. The interior of this product is lined with fine velvet. This material has excellent protective properties and gives the product added value and elegance. The design is elaborate and emphasizes the quality and level of this watch storage product. Capacity and Storage The Watch Roll Vintage 1 from Heisse & Söhne provides space for one watch, making it the ideal choice for single pieces or your favourite watch. By storing your watch in the watch roll, it is well protected from external influences and scratches. This makes it a valuable storage box for watch lovers. Scope of Delivery and Use The delivery includes the item, the watch travel case. It is a travel case for watches, which is particularly useful when travelling. The watch roll is light and handy, can be easily stowed in any bag, and allows you to take your watch anywhere. Design and Style The Watch Roll Vintage 1 presents itself in a classic, black design. The black case is timeless and adapts to any style. Whether classic or modern - this watch roll is always the right choice. In short, the Watch Roll is an excellent investment for every watch lover. It combines high utility value with exclusive design and excellent manufacturing quality. Your watch deserves only the best - and that's what the Watch Roll Vintage 1 from Heisse & Söhne offers you.

EUR 64.90

1

Brand

Colour

Gender

Merchant

Price (EUR)