30 results (0,15972 seconds)

Show all filters

Brand

Show all

Colour

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

RAW Absorbent Sock, With CorkSorb Oil Binding Filling, 75mm X 1200mm, Pack Of 24

RAW Absorbent Sock, With CorkSorb Oil Binding Filling, 75mm X 1200mm, Pack Of 24

Absorbent sock, with CorkSorb oil binding filling, 75 mm x 1200 mm, pack of 24. Supplied = assembled. Model = oil. Absorption = 87 l/pack. Material = cork. Length = 1200 mm. Diameter = 75 mm. Colour = grey. Weight = 12 kg. Application = heavy duty. Situation = reaction to leaks (emergency) , leak prevention. Property = diverting/containing/collecting. Type of leakage = surface leaks, spilling. Frequency of use = multiple, permanent. Place of use = indoor use. Weight per item = 0.5 kg. Product type = absorbent sheeting. Safety and cleanliness at the workplace - for indoors and outdoors. To place around machines, drums etc. - in an emergency a preventive measure to contain leaks. Suitable for the absorption of oil, fuel, solvents and other organic compounds (no water) Highly versatile: Absorbent socks contribute to a cleaner and safer workplace. They bend around corners, adapt to uneven surfaces and prevent liquids from spreading out around machines, drums etc. For preventive use or in emergencies. These ''oil-only'' absorbent socks suitable for absorbing oils and other hydrocarbon-based liquids. They can also be used in exposed outdoor areas, as they will not absorb water, even in rainy weather. Environmentally friendly: Made of the regenerative and resource conserving cork. Natural product, biologically degradable. Applications: Can be used wherever there is a potential for oil to leak in storage, during transport or in manufacturing processes, or where such leaks create a hazard to people or could contaminate the floor or ground water. Certification: DEKRA tested oil absorbent agent. The specified values for the absorption capacity of CorkSorb are based on measurements according to the RAW factory standard, using a test fluid which meets the requirements for oil binders for ELHO (extra light heating oil) Please refer to DEKRA test report no. 55255538 for data on the tested CorkSorb oil absorbent agent (types I, II, III R)

GBP 359.99
1

RAW Absorbent Sock, With CorkSorb Oil Binding Filling, 75mm X 3000mm, Pack Of 10

RAW Absorbent Sock, With CorkSorb Oil Binding Filling, 75mm X 3000mm, Pack Of 10

Absorbent sock, with CorkSorb oil binding filling, 75 mm x 3000 mm, pack of 10. Supplied = assembled. Model = oil. Absorption = 99 l/pack. Material = cork. Length = 3000 mm. Diameter = 75 mm. Colour = grey. Weight = 10 kg. Application = heavy duty. Situation = reaction to leaks (emergency) , leak prevention. Property = diverting/containing/collecting. Type of leakage = surface leaks, spilling. Frequency of use = multiple, permanent. Place of use = indoor use. Weight per item = 1 kg. Product type = absorbent sheeting. Safety and cleanliness at the workplace - for indoors and outdoors. To place around machines, drums etc. - in an emergency a preventive measure to contain leaks. Suitable for the absorption of oil, fuel, solvents and other organic compounds (no water) Highly versatile: Absorbent socks contribute to a cleaner and safer workplace. They bend around corners, adapt to uneven surfaces and prevent liquids from spreading out around machines, drums etc. For preventive use or in emergencies. These ''oil-only'' absorbent socks suitable for absorbing oils and other hydrocarbon-based liquids. They can also be used in exposed outdoor areas, as they will not absorb water, even in rainy weather. Environmentally friendly: Made of the regenerative and resource conserving cork. Natural product, biologically degradable. Applications: Can be used wherever there is a potential for oil to leak in storage, during transport or in manufacturing processes, or where such leaks create a hazard to people or could contaminate the floor or ground water. Certification: DEKRA tested oil absorbent agent. The specified values for the absorption capacity of CorkSorb are based on measurements according to the RAW factory standard, using a test fluid which meets the requirements for oil binders for ELHO (extra light heating oil) Please refer to DEKRA test report no. 55255538 for data on the tested CorkSorb oil absorbent agent (types I, II, III R)

GBP 299.99
1

Watco Firm-Step Duckboard 996mm X 996mm X 25mm, Grey, Includes 9 Feet

Watco Firm-Step Duckboard 996mm X 996mm X 25mm, Grey, Includes 9 Feet

Images for illustration purposes only Help keep operatives safe with this indestructibly tough, anti slip, chemical resistant work platform. The 25mm open grid allows oil and water to drain freely and the adjustable feet prevent rocking on uneven surfaces. Use on wet production lines, by sinks, in wash bays or around wet oily machinery. Recommended areas of use Ideal for use around wet, oily machinery, wash down areas Features Corrosion resistant Adjustable feet for uneven surfaces Keeps feet and products dry in constantly wet areas Made of fire retardant resin certified to BS476 Part 7 (Class 1) Wet PTV 65 - low slip potential Lightweight, easy to move for cleaning Sizes available: 996mm x 996mm x 25mm (includes 9 feet) 996mm x 1985mm x 25mm (includes 15 feet) Pendulum Slip Test Values Dry PTV Wet PTV 70 Extremely low slip potential 65 Low slip potential

GBP 289.99
1

RAW Absorbent Cushion, With CorkSorb Oil Binding Filling, 450 X 450mm, Pack Of 12

RAW Absorbent Cushion, With CorkSorb Oil Binding Filling, 450 X 450mm, Pack Of 12

Absorbent cushion, with CorkSorb oil binding filling, 450 x 450 mm, pack of 12. Supplied = assembled. Model = oil. Absorption = 92 l/pack. Material = cork. Length = 450 mm. Width = 450 mm. Colour = grey. Weight = 10 kg. Application = heavy duty. Situation = reaction to leaks (emergency) , leak prevention. Property = diverting/containing/collecting. Type of leakage = spilling, drip leaks, surface leaks. Frequency of use = multiple, permanent. Place of use = indoor use. Weight per item = 0.83 kg. Product type = absorbent sheeting. To place under leaking pipes, machines etc. - in an emergency for the absorption of larger quantities of liquid. Safety and cleanliness at the workplace - for indoors and outdoors. Suitable for the absorption of oil, fuel, solvents and other organic compounds (no water) Highly versatile: Absorbent cushions offer an ideal way to solve problems with dripping valves, lines, pipe joints, etc. Can be used everywhere that the main problem cannot be solved immediately or where liquids escaping during repair work need to be contained. Absorbent socks therefore contributed to increased cleanliness and safety at the workplace. Absorbent cushions can be used to absorb larger quantities of liquid in an emergency. These ''oil only'' absorbent cushions are suitable for absorbing oils and other carbon-based liquids. They can also be used outdoors, as no water is absorbed even if it is raining. Environmentally friendly: Made of the regenerative and resource conserving cork. Natural product, biologically degradable. Applications: Can be used wherever there is a potential for oil to leak in storage, during transport or in manufacturing processes, or where such leaks create a hazard to people or could contaminate the floor or ground water. Certification: DEKRA tested oil absorbent agent. The specified values for the absorption capacity of CorkSorb are based on measurements according to the RAW factory standard, using a test fluid which meets the requirements for oil binders for ELHO (extra light heating oil) Please refer to DEKRA test report no. 55255538 for data on the tested CorkSorb oil absorbent agent (types I, II, III R)

GBP 299.99
1

CRAEMER Heavy Duty Pallet, Low Density Polyethylene, Width 1000mm, Grey

CRAEMER Heavy Duty Pallet, Low Density Polyethylene, Width 1000mm, Grey

Heavy duty pallet, low density polyethylene, width 1000 mm, grey, 1+ items. Supplied = assembled. Material = polyethylene (low pressure PE/HDPE) Length = 1200 mm. Width = 1000 mm. Height = 160 mm. Colour = grey. Max. load static = 7500 kg. Max. load dynamic = 1500 kg. Model = 3 runners and 5 mm outer edge. Weight = 25.5 kg. Fork entry option = 2-way. Forklift access height = 100 mm. Forklift access width short side = 710 mm. Forklift access width long side = 780 mm. Forklift access height short side = 100 mm. Forklift access height long side = 100 mm. Temperature resistance = -40 C to +70 C. Max. load in high shelving = 1400 kg. Product type = pallets made of plastic. Hygienic and suitable for foodstuffs with detergent immersion test certification according to DIN 55423. Extreme high load capacity in accordance with ISO 8611. Ideal for automated processes. Guaranteed to hold its shape. The 1200 x 1000 mm pallet has a 5 mm heigh outer edge. With RFID on request.

GBP 359.99
1

Watco Firm-Step Grating 1985mm X 996mm X 25mm Grey

Watco Firm-Step Grating 1985mm X 996mm X 25mm Grey

Images for illustration purposes onlyIncredible strength, chemical resistance and anti-slip properties make these resin GRP grating systems ideal for heavily used areas, landings, walkways, ramps, production areas, platforms. Loose lay or fix to provide an instant, corrosion resistant, impact resistant floor. Will flex under point loading but recover to original position. Fixings include clip, bolt, washer and nut. FeaturesCorrosion resistant and can be used inside or outMaintenance free with excellent impact resistanceKeeps feet and products dry in constantly wet areasUse instead of metal or wood to create mezzanine and raised walkway areasCan be trimmed to size on siteContrasting coloured edge ramp available easily connects to any size gratingWill take an even load of up to 3.6 tonnes if supported at 450mm intervals. More details available on our datasheetMade of fire retardant resin certified to BS476 Part 7 (Class 1) Pendulum Slip Test ValuesDry PTV Wet PTV70 Extremely low slip potential 65 Low slip potential

GBP 339.99
1

Phoenix MC Series MC1244GGC Size 4 Cube Locker in Light Grey with Combination Lock

Phoenix MC Series MC1244GGC Size 4 Cube Locker in Light Grey with Combination Lock

The Phoenix MC Series MC1244GGC MEDICAL CUBE LOCKER is designed to provide secure storage for First Aid items, Medical Supplies & COVID-19 Test kits, making it ideal for use at GP Surgeries, Pharmacies & Hospitals as well as in Offices, Gyms, Schools and industrial & commercial workplaces. STANDARDS Complies with BS5499-1 standard for high visibility labelling. SYSTEM Modular system allows for the lockers to be fixed together to form a stack or block of lockers. LOCKING - Mechanical 4 wheel combination lock with Private function. For full details on locking options, see PDF Specification Sheet. CONSTRUCTION Fixed welded frame design, added to high quality fixings, make for an extremely sturdy, durable & robust locker. SPECIAL FEATURES Door can be fitted with a right or left hand opening. Each unit has a ventilated door and can also be fixed to a wall. ASSEMBLY Lockers are supplied as a flat pack with easy to assemble fixed frame design, which can be built in less than 5 minutes. COLOUR Finished in a high quality powder coated Light Grey (RAL7035) paint. Note: Image is for illustrative purposes only and may differ from the actual product

GBP 179.99
1

Phoenix MC Series MC1244GGE Size 4 Cube Locker in Light Grey with Electronic Lock

Phoenix MC Series MC1244GGE Size 4 Cube Locker in Light Grey with Electronic Lock

The Phoenix MC Series MC1244GGE MEDICAL CUBE LOCKER is designed to provide secure storage for First Aid items, Medical Supplies & COVID-19 Test kits, making it ideal for use at GP Surgeries, Pharmacies & Hospitals as well as in Offices, Gyms, Schools and industrial & commercial workplaces. STANDARDS Complies with BS5499-1 standard for high visibility labelling. SYSTEM Modular system allows for the lockers to be fixed together to form a stack or block of lockers. LOCKING - Electronic lock with Private and public function. For full details on locking options, see PDF Specification Sheet. CONSTRUCTION Fixed welded frame design, added to high quality fixings, make for an extremely sturdy, durable & robust locker. SPECIAL FEATURES Door can be fitted with a right or left hand opening. Each unit has a ventilated door and can also be fixed to a wall. ASSEMBLY Lockers are supplied as a flat pack with easy to assemble fixed frame design, which can be built in less than 5 minutes. COLOUR Finished in a high quality powder coated Light Grey (RAL7035) paint. Note: Image is for illustrative purposes only and may differ from the actual product

GBP 219.99
1

Phoenix MC Series MC0644GGE Size 3 Cube Locker in Light Grey with Electronic Lock

Phoenix MC Series MC0644GGE Size 3 Cube Locker in Light Grey with Electronic Lock

The Phoenix MC Series MC0644GGE MEDICAL CUBE LOCKER is designed to provide secure storage for First Aid items, Medical Supplies & COVID-19 Test kits, making it ideal for use at GP Surgeries, Pharmacies & Hospitals as well as in Offices, Gyms, Schools and industrial & commercial workplaces. STANDARDS Complies with BS5499-1 standard for high visibility labelling. SYSTEM Modular system allows for the lockers to be fixed together to form a stack or block of lockers. LOCKING - Electronic lock with Private and public function. For full details on locking options, see PDF Specification Sheet. CONSTRUCTION Fixed welded frame design, added to high quality fixings, make for an extremely sturdy, durable & robust locker. SPECIAL FEATURES Door can be fitted with a right or left hand opening. Each unit has a ventilated door and can also be fixed to a wall. ASSEMBLY Lockers are supplied as a flat pack with easy to assemble fixed frame design, which can be built in less than 5 minutes. COLOUR Finished in a high quality powder coated Light Grey (RAL7035) paint. Note: Image is for illustrative purposes only and may differ from the actual product

GBP 179.99
1

Phoenix MC Series MC1244GGK Size 4 Cube Locker in Light Grey with Key Lock

Phoenix MC Series MC1244GGK Size 4 Cube Locker in Light Grey with Key Lock

The Phoenix MC Series MC1244GGK MEDICAL CUBE LOCKER is designed to provide secure storage for First Aid items, Medical Supplies & COVID-19 Test kits, making it ideal for use at GP Surgeries, Pharmacies & Hospitals as well as in Offices, Gyms, Schools and industrial & commercial workplaces. STANDARDS Complies with BS5499-1 standard for high visibility labelling. SYSTEM Modular system allows for the lockers to be fixed together to form a stack or block of lockers. LOCKING - Standard Key lock. 2 Keys Supplied with each lock. For full details on locking options, see PDF Specification Sheet. CONSTRUCTION Fixed welded frame design, added to high quality fixings, make for an extremely sturdy, durable & robust locker. SPECIAL FEATURES Door can be fitted with a right or left hand opening. Each unit has a ventilated door and can also be fixed to a wall. ASSEMBLY Lockers are supplied as a flat pack with easy to assemble fixed frame design, which can be built in less than 5 minutes. COLOUR Finished in a high quality powder coated Light Grey (RAL7035) paint. Note: Image is for illustrative purposes only and may differ from the actual product

GBP 179.99
1

Watco Firm-Step Heavy Duty Sheet Fine 1200mm X 1200mm, Grey

Watco Firm-Step Heavy Duty Sheet Fine 1200mm X 1200mm, Grey

Images for illustration purposes onlyFirm-Step Heavy Duty GRP sheets bring maximum safety underfoot in heavy traffic industrial environments. Ideal for areas in constant use, Firm-Step Heavy Duty GRP Sheets enable you to produce continuous slip resistant walkways and workspaces with hardly any downtime. The resin bonded ceramic grit surface offers the same superior durability as the Firm-Step Heavy Duty GRP Step Covers. Available in four colours and in fine or coarse grades.Recommended areas of useRamps, walkways, fire escapes, all staircases, mezzanine floors, train track crossings, areas of heavy foot trafficInternal ramps and staircasesIdeal for wet or very cold areas where the application of a coating may be impractical. Also suitable to be used around oily machines and for chemically damaged floorsFeaturesTough and hard wearing for continuous slip resistance that wont rot, warp or corrodeHeavy wear, slip resistance for vehicles, forklifts and pedestriansExtremely low slip potential (Wet PTV 70) Available up to 2400mm x 1200mm with our free cut to size service. Or can be trimmed to size on siteWe recommend screw fixing to most substrates, combined with Watco Adhesive Mastic to prevent rocking on uneven surfaces. Screws and fixing plugs and a free pre-drilling service are available if required. Pendulum Slip Test ValuesTop Surface Dry PTV Wet PTVCoarse Grit 76 Extremely low slip potential 70 Extremely low slip potential Fine Grit 71 Extremely low slip potential 63 Extremely low slip potential

GBP 279.99
1

AMPERE DEUTSCHLAND GMBH Marking Paint, Contents 500 Ml, Pack Of 12, Grey

AMPERE DEUTSCHLAND GMBH Marking Paint, Contents 500 Ml, Pack Of 12, Grey

Marking paint, contents 500 ml, pack of 12, grey. Supplied = assembled. Colour = grey. Contents = 0.5 l. Drying time = 20 min. Hazard class = GHS02, GHS07. Product type = spray paints. With high pigment content. Hard-wearing and weatherproof. Special nozzle for sharp-edged markings. Resistant to temperature fluctuations. No CFCs, lead, cadmium or toluene. Traffic Paint road marking paint - for professional and economic marking in indoor and outdoor areas. Ensure precise markings on the ground in your car parks and routes within the company. Grey and black paint is used to cover markings which are no longer required. Dries quickly: Dry in approx. 20 minutes. Hard in approx 4 hours. Can be driven on after approx. 12 hours. Yield: Depending on the set line width, one box of 12 cans will cover approx. 600 m. To prevent the can from clogging, briefly spray the nozzle free of residue after use. Pack of 1 box containing 12 cans. Please note Test the paint prior to application, as adhesion can vary according to the road surface and weather conditions. When marking sealed or treated surfaces, we recommend testing the paint for compatibility, drying time and adhesion in each case. The surface may need to be briefly sanded back or a primer may need to be used to ensure optimal adhesion. If the surface has not be prepared accordingly, the marking paint may peel off after a short period of time.

GBP 259.99
1

Watco Firm-Step Heavy Duty Sheet Coarse Grey, 1200MM X 1200MM

Watco Firm-Step Heavy Duty Sheet Coarse Grey, 1200MM X 1200MM

Images for illustration purposes onlyFirm-Step Heavy Duty GRP sheets bring maximum safety underfoot in heavy traffic industrial environments. Ideal for areas in constant use, Firm-Step Heavy Duty GRP Sheets enable you to produce continuous slip resistant walkways and workspaces with hardly any downtime. The resin bonded ceramic grit surface offers the same superior durability as the Firm-Step Heavy Duty GRP Step Covers. Available in four colours and in fine or coarse grades.Recommended areas of useRamps, walkways, fire escapes, all staircases, mezzanine floors, train track crossings, areas of heavy foot trafficInternal ramps and staircasesIdeal for wet or very cold areas where the application of a coating may be impractical. Also suitable to be used around oily machines and for chemically damaged floorsFeaturesTough and hard wearing for continuous slip resistance that wont rot, warp or corrodeHeavy wear, slip resistance for vehicles, forklifts and pedestriansExtremely low slip potential (Wet PTV 70) Available up to 2400mm x 1200mm with our free cut to size service. Or can be trimmed to size on siteWe recommend screw fixing to most substrates, combined with Watco Adhesive Mastic to prevent rocking on uneven surfaces. Screws and fixing plugs and a free pre-drilling service are available if required. Pendulum Slip Test ValuesTop Surface Dry PTV Wet PTVCoarse Grit 76 Extremely low slip potential 70 Extremely low slip potential Fine Grit 71 Extremely low slip potential 63 Extremely low slip potential

GBP 279.99
1

Watco Firm-Step Heavy Duty Sheet Fine 800mm X 1200mm, Grey

Watco Firm-Step Heavy Duty Sheet Fine 800mm X 1200mm, Grey

Images for illustration purposes onlyFirm-Step Heavy Duty GRP sheets bring maximum safety underfoot in heavy traffic industrial environments. Ideal for areas in constant use, Firm-Step Heavy Duty GRP Sheets enable you to produce continuous slip resistant walkways and workspaces with hardly any downtime. The resin bonded ceramic grit surface offers the same superior durability as the Firm-Step Heavy Duty GRP Step Covers. Available in four colours and in fine or coarse grades.Recommended areas of useRamps, walkways, fire escapes, all staircases, mezzanine floors, train track crossings, areas of heavy foot trafficInternal ramps and staircasesIdeal for wet or very cold areas where the application of a coating may be impractical. Also suitable to be used around oily machines and for chemically damaged floorsFeaturesTough and hard wearing for continuous slip resistance that wont rot, warp or corrodeHeavy wear, slip resistance for vehicles, forklifts and pedestriansExtremely low slip potential (Wet PTV 70) Available up to 2400mm x 1200mm with our free cut to size service. Or can be trimmed to size on siteWe recommend screw fixing to most substrates, combined with Watco Adhesive Mastic to prevent rocking on uneven surfaces. Screws and fixing plugs and a free pre-drilling service are available if required. Pendulum Slip Test ValuesTop Surface Dry PTV Wet PTVCoarse Grit 76 Extremely low slip potential 70 Extremely low slip potential Fine Grit 71 Extremely low slip potential 63 Extremely low slip potential

GBP 199.99
1

AMPERE DEUTSCHLAND GMBH Industry Floor Paint Ground Marking Paint, Capacity 5 L, Grey

AMPERE DEUTSCHLAND GMBH Industry Floor Paint Ground Marking Paint, Capacity 5 L, Grey

Industry Floor Paint ground marking paint, capacity 5 l, grey. Colour = grey. Contents = 5 l. Hazard class = GHS02, GHS07, GHS08, GHS09. Product type = floor paints. For indoor use. Easy to use. Hardwearing and durable. Ground marking paint - for indoor use. Extremely easy to work with, lends the surface a satin finish Ideally suited for use on industrial floors, in warehouses, utility rooms, garages, car parks and much more Industry Floor Paint ground marking paint - Easy to clean - Does not yellow - Chemical resistant - VOC: max. 500 g/l - Application temperature: +10 C to +30 C - Application by means of a short-haired roller - Thinning and tool cleaning: Solvent Floor Paint thinner (see accessories) - Drying time: dries in approx. 1 hour, can be painted over in approx. 8 hours Yield: up to 10 m/l per coat ATTENTION: prior to application, the floor should be cleaned and any dust be removed. IMPORTANT INFORMATION ON INDUSTRY FLOOR PAINT Test the paint prior to application, as adhesion can vary according to the road surface and weather conditions. When marking sealed or treated surfaces, we recommend testing the paint for compatibility, drying time and adhesion in each case. The surface may need to be briefly sanded back or a primer may need to be used to ensure optimal adhesion. If the surface has not been prepared accordingly, the marking paint may peel off after a short period of time.

GBP 299.99
1

Justrite EMEA Anti-Stat Pop 3 Layer ESD Table Matting, per Metre, Width 610 mm

Justrite EMEA Anti-Stat Pop 3 Layer ESD Table Matting, per Metre, Width 610 mm

Anti-Stat POP 3 Layer ESD table matting, per metre, width 610 mm. Height = 2.4 mm. Width = 610 mm. Colour = grey. Material = vinyl. Place of use = for dry, static workstations. Feature = ESD version. Surface = closed. Work area = dry. Custom dimensions possible = yes. Product type = anti-fatigue mats. Protection for sensitive components from damage due to electrostatic discharge. Three layer mat design for precise discharging. Satisfies IEC 61340-4-1 (category DIF) Resistant to many chemicals. Smooth, easy to clean surface. The table matting series for workplaces where electrostatic discharges need to be effectively prevented. Use these mats to connect the tabletop, staff and conductive material to a shared earth point. This equalises the charge between all items and staff to ensure that static electricity flows to earth in a controlled manner. Protects the table and keeps sensitive components safe from damage caused by electrostatic discharge. The smooth surface is hardwearing and can be treated with the mat cleaner, which is available as an accessory. Microcellular vinyl foam. Compliant with EOS/ESD-S4, measured resistance R g 10 and R p 10 . Electrostatic charge (walk test) in accordance with ISO 6356 and EN 1815. Height 3.8 mm. Products cut to order may exhibit dimensional tolerances of up to 5% depending on the material. Products cut to order are produced specifically for you, and can therefore not be returned. Please order wrist earthing cable (see Accessories) at the same time. If no wrist cable is ordered, the mat will be delivered without fastening option (push button) for earthing cable.

GBP 179.99
1

Justrite EMEA Anti-Stat Pop 3 Layer ESD Table Matting, per Metre, Width 760 mm

Justrite EMEA Anti-Stat Pop 3 Layer ESD Table Matting, per Metre, Width 760 mm

Anti-Stat POP 3 Layer ESD table matting, per metre, width 760 mm. Height = 2.4 mm. Width = 760 mm. Colour = grey. Material = vinyl. Place of use = for dry, static workstations. Feature = ESD version. Surface = closed. Work area = dry. Custom dimensions possible = yes. Product type = anti-fatigue mats. Protection for sensitive components from damage due to electrostatic discharge. Three layer mat design for precise discharging. Satisfies IEC 61340-4-1 (category DIF) Resistant to many chemicals. Smooth, easy to clean surface. The table matting series for workplaces where electrostatic discharges need to be effectively prevented. Use these mats to connect the tabletop, staff and conductive material to a shared earth point. This equalises the charge between all items and staff to ensure that static electricity flows to earth in a controlled manner. Protects the table and keeps sensitive components safe from damage caused by electrostatic discharge. The smooth surface is hardwearing and can be treated with the mat cleaner, which is available as an accessory. Microcellular vinyl foam. Compliant with EOS/ESD-S4, measured resistance R g 10 and R p 10 . Electrostatic charge (walk test) in accordance with ISO 6356 and EN 1815. Height 3.8 mm. Products cut to order may exhibit dimensional tolerances of up to 5% depending on the material. Products cut to order are produced specifically for you, and can therefore not be returned. Please order wrist earthing cable (see Accessories) at the same time. If no wrist cable is ordered, the mat will be delivered without fastening option (push button) for earthing cable.

GBP 219.99
1

Justrite EMEA Anti-Stat Pop 3 Layer ESD Table Matting, per Metre, Width 910 mm

Justrite EMEA Anti-Stat Pop 3 Layer ESD Table Matting, per Metre, Width 910 mm

Anti-Stat POP 3 Layer ESD table matting, per metre, width 910 mm. Height = 2.4 mm. Width = 910 mm. Colour = grey. Material = vinyl. Place of use = for dry, static workstations. Feature = ESD version. Surface = closed. Work area = dry. Custom dimensions possible = yes. Product type = anti-fatigue mats. Protection for sensitive components from damage due to electrostatic discharge. Three layer mat design for precise discharging. Satisfies IEC 61340-4-1 (category DIF) Resistant to many chemicals. Smooth, easy to clean surface. The table matting series for workplaces where electrostatic discharges need to be effectively prevented. Use these mats to connect the tabletop, staff and conductive material to a shared earth point. This equalises the charge between all items and staff to ensure that static electricity flows to earth in a controlled manner. Protects the table and keeps sensitive components safe from damage caused by electrostatic discharge. The smooth surface is hardwearing and can be treated with the mat cleaner, which is available as an accessory. Microcellular vinyl foam. Compliant with EOS/ESD-S4, measured resistance R g 10 and R p 10 . Electrostatic charge (walk test) in accordance with ISO 6356 and EN 1815. Height 3.8 mm. Products cut to order may exhibit dimensional tolerances of up to 5% depending on the material. Products cut to order are produced specifically for you, and can therefore not be returned. Please order wrist earthing cable (see Accessories) at the same time. If no wrist cable is ordered, the mat will be delivered without fastening option (push button) for earthing cable.

GBP 259.99
1

Watco Safety Coat Coarse Window Grey

Watco Safety Coat Coarse Window Grey

Images for illustration purposes onlyWatco Safety Coat has been re-formulated to produce a Best in Class water based, anti slip epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsPotentially slippery, heavy wear areasFeaturesTough, hard wearing floor finish for heavy wear areasPre-blended aggregate provides an evenly textured finishApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 4 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 299.99
1

AMPERE DEUTSCHLAND GMBH Industry Floor Paint Antislip Ground Marking Paint, Capacity 5 L, Grey

AMPERE DEUTSCHLAND GMBH Industry Floor Paint Antislip Ground Marking Paint, Capacity 5 L, Grey

Industry Floor Paint antislip ground marking paint, capacity 5 l, grey. Colour = grey. Contents = 5 l. Hazard class = GHS02, GHS07, GHS09. Product type = floor paints. For indoor use. With anti-slip properties. Hardwearing and durable. Easy to apply, with anti-slip properties Ideally suited for use on industrial floors, in warehouses, utility rooms, garages, car parks and much more The special formula used for the anti-slip ground marking paint guarantees non-slip surfaces that provide good grip wherever areas may be subjected to hazards, thereby contributing to a safe environment. Industry Floor Paint antislip ground marking paint - Anti-slip properties (with added fine quartz granulate) - Easy to clean - Does not yellow - Textured appearance - Chemical resistant - VOC: max. 500 g/l - Application temperature: +10 C to +30 C - Application by means of a short-haired roller - Thinning and tool cleaning: Diluant Floor Paint thinner - Drying time: dries in approx. 1 hour, can be painted over in approx. 8 hours Yield: up to 8 - 10 m/l per coat ATTENTION: prior to application, the floor should be cleaned and any dust be removed. IMPORTANT INFORMATION ON INDUSTRY FLOOR PAINT ANTISLIP Test the paint prior to application, as adhesion can vary according to the road surface and weather conditions. When marking sealed or treated surfaces, we recommend testing the paint for compatibility, drying time and adhesion in each case. The surface may need to be briefly sanded back or a primer may need to be used to ensure optimal adhesion. If the surface has not been prepared accordingly, the marking paint may peel off after a short period of time.

GBP 299.99
1

Watco Safety Coat Coarse Tarpaulin Grey

Watco Safety Coat Coarse Tarpaulin Grey

Images for illustration purposes onlyWatco Safety Coat has been re-formulated to produce a Best in Class water based, anti slip epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsPotentially slippery, heavy wear areasFeaturesTough, hard wearing floor finish for heavy wear areasPre-blended aggregate provides an evenly textured finishApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 4 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 299.99
1

Watco Epoxy Gloss Coat Tarpaulin Grey

Watco Epoxy Gloss Coat Tarpaulin Grey

Images for illustration purposes only Watco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 219.99
1

Watco Epoxy Gloss Coat Hygienic Tarpaulin Grey

Watco Epoxy Gloss Coat Hygienic Tarpaulin Grey

Images for illustration purposes onlyWatco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Hygienic grades incorporate Silver Ion technology and are ideal for areas where cleanliness and hygiene are as important as a hard wearing finish. Although the product tests as low slip potential, if positive traction is required please specify Watco Safety Coat.All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously.Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsMost heavily trafficked floorsFeaturesTough, hard wearing floor finish for heavy wear areasApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursGloss, Matt or Hygienic versions availableTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 14 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 279.99
1

Watco Safety Coat Hygienic Tarpaulin Grey

Watco Safety Coat Hygienic Tarpaulin Grey

Images for illustration purposes onlyWatco Safety Coat has been re-formulated to produce a Best in Class water based, anti slip epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Safety Coat Hygienic incorporates Silver Ion technology and is ideal for areas where slip resistance, cleanliness and hygiene are as important as a hard wearing finish. All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsPotentially slippery, heavy wear areasFeaturesTough, hard wearing floor finish for heavy wear areasPre-blended aggregate provides an evenly textured finishApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 4 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 309.99
1