21 results (0,15516 seconds)

Show all filters

Brand

Show all

Colour

Size

Gender

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Beeswift Glovezilla Para-Aramid Sleeve Yellow 10in - GZ14Y10

Beeswift Glovezilla Para-Aramid Sleeve Yellow 10in - GZ14Y10

Beeswift Glovezilla Para-Aramid Sleeve is lightweight for maximum dexterity and comfort with sensitivity. Suitable for general assembly handling and engineering applications. 100% Para-Aramid Liner. EN 388:2016+A1:2018. Level 1 - Abrasion Resistance. Level x- Cut resistance (Coupe Test) Level 2 - Tear Resistance. Level 3 - Puncture Resistance. Level B - TDM Cut Resistance (ISO 13997) EN ISO 11612: 2015. A1 - Limited Flame Spread (Method A) F2 - Contact Heat (250C for between 10 to 15 Seconds) . 100% Para-Aramid Liner Lightweight for maximum dexterity and comfort with sensitivity Suitable for general assembly handling and engineering applications EN 388:2016+A1:2018 Level 1 - Abrasion Resistance. Level x- Cut resistance (Coupe Test) Level 2 - Tear Resistance. Level 3 - Puncture Resistance Level B - TDM Cut Resistance (ISO 13997) EN ISO 11612: 2015 A1 - Limited Flame Spread (Method A) F2 - Contact Heat (250C for between 10 to 15 Seconds)

GBP 26.99
1

Beeswift Glovezilla Nitrile Palm Coated Gloves Yellow Extra Large - GZ06YXL

Beeswift Glovezilla Nitrile Palm Coated Gloves Yellow Extra Large - GZ06YXL

These lightweight gloves have nitrile coating on the palm and fingers making them suitable for general assembly handling and engineering applications. Made from a knitted para-aramid steel and polyester knitted fabric with a spandexliner they offer flexibility for most tasks. Para-Aramid 71.2%, Steel 13.5%, Polyester 10.5%, Spandex8% Liner 100% Nitrile rubber coating Ventilated back Lightweight for maximum dexterity and comfort with sensitivity Suitable for general assembly handling and engineering applications EN 388:2016+A1:2018 Level 4 - Abrasion Resistance EN 388:2016+A1:2018 Level x- Cut resistance (Coupe Test) EN 388:2016+A1:2018 Level 4 - Tear Resistance EN 388:2016+A1:2018 Level 1 - Puncture Resistance EN 388:2016+A1:2018 Level D - TDM Cut Resistance (ISO 13997)

GBP 18.99
1

Leucanthemum 'Real Goldcup' (Pot Size: 3 Litre Pot)

Leucanthemum 'Real Goldcup' (Pot Size: 3 Litre Pot)

Our much loved Shasta Daisy is Leucanthemum ‘Real Goldcup’ and has been selected by our horticultural team for its exceptional pollinating qualities and vivid colour interest throughout the growing season. Leathery rich green foliage grounds the large yellow centred blooms that open a vivid lemon yellow colour. These informal blooms are perfect for the front of your beds and borders, allowing you to easily reach and pick some enchanting cut flowers to enjoy indoors.  The relaxed meadow prairie feel of Shasta Daisy’s are perfect for cottage gardens and wildlife gardens.  In stark contrast we also enjoy seeing the daisy in an urban and contemporary space too. With an average height of 90 cm, these charming daisies become a feature offering height in your borders but also enjoyed in rock gardens, or Summer container arrangements. Their graceful appearance and habit make them a versatile choice for various garden styles, including traditional to contemporary. We recommend planting a patch of Leucanthemums together en masse; for an impactful space of swirling cheerful blooms that can be cut for prairie arrangements and also left for wild bees and other declining pollinators to enjoy. ‘Real Goldcup’ provide forage for a wide variety of pollinating insects. Overall, we prioritise plants that are fully hardy and will stand the test of time in your garden, ‘Real Goldcup’ is horticultural gem for durability and a powerful pollinator bringing a wealth of wildlife to your outdoor space. Easy to grow and offering good disease and pest resistance, we favour cheerful Shasta Daisy for every garden border.  

GBP 20.00
1

StarTech.com 10m LC to SC OS2 Single Mode Duplex Fibre Optic Cable

StarTech.com 10m LC to SC OS2 Single Mode Duplex Fibre Optic Cable

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125m Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC) -polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.

GBP 32.99
1

StarTech.com 2m LC to LC OS2 Single Mode Duplex Fibre Optic Cable

StarTech.com 2m LC to LC OS2 Single Mode Duplex Fibre Optic Cable

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125m Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC) -polished LC to LC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.

GBP 21.99
1

StarTech.com 3m LC to SC OS2 Single Mode Duplex Fibre Optic Cable

StarTech.com 3m LC to SC OS2 Single Mode Duplex Fibre Optic Cable

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125m Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC) -polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.

GBP 22.99
1

StarTech.com 1m LC to LC Single Mode Fibre Optic Cable

StarTech.com 1m LC to LC Single Mode Fibre Optic Cable

OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityConnect to single-fibre networking devices including simplex patch panels, SFP transceivers, and fibre NICs. This 9/125m OS2 simplex single mode fibre patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC) -polished LC to LC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.

GBP 32.99
1

StarTech.com 1m LC to LC OS2 Single Mode Duplex Fibre Optic Cable

StarTech.com 1m LC to LC OS2 Single Mode Duplex Fibre Optic Cable

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125m Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC) -polished LC to LC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.

GBP 22.99
1

StarTech.com 5m LC to LC OS2 Single Mode Simplex Fibre Optic Cable

StarTech.com 5m LC to LC OS2 Single Mode Simplex Fibre Optic Cable

OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityConnect to single-fibre networking devices including simplex patch panels, SFP transceivers, and fibre NICs. This 9/125m OS2 simplex single mode fibre patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC) -polished LC to LC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.

GBP 33.99
1

StarTech.com 3m LC to LC OS2 Single Mode Duplex Fibre Optic Cable

StarTech.com 3m LC to LC OS2 Single Mode Duplex Fibre Optic Cable

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125m Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC) -polished LC to LC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.

GBP 29.99
1

StarTech.com 3m LC to LC Single Mode Fibre Optic Cable

StarTech.com 3m LC to LC Single Mode Fibre Optic Cable

OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityConnect to single-fibre networking devices including simplex patch panels, SFP transceivers, and fibre NICs. This 9/125m OS2 simplex single mode fibre patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC) -polished LC to LC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.

GBP 33.99
1

StarTech.com 10m LC to LC OS2 Single Mode Duplex Fibre Optic Cable

StarTech.com 10m LC to LC OS2 Single Mode Duplex Fibre Optic Cable

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125m Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC) -polished LC to LC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.

GBP 34.99
1

StarTech.com 5m LC to LC OS2 Single Mode Duplex Fibre Optic Cable

StarTech.com 5m LC to LC OS2 Single Mode Duplex Fibre Optic Cable

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125m Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC) -polished LC to LC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.

GBP 29.99
1

StarTech.com 5m LC to LC Single Mode Fibre Optic Cable

StarTech.com 5m LC to LC Single Mode Fibre Optic Cable

OS2 LC to SC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityConnect to single-fibre networking devices including simplex patch panels, SFP transceivers, and fibre NICs. This 9/125m OS2 simplex single mode fibre patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC) -polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.

GBP 19.99
1

StarTech.com 1m LC to SC OS2 Single Mode Simplex Fibre Optic Cable

StarTech.com 1m LC to SC OS2 Single Mode Simplex Fibre Optic Cable

OS2 LC to SC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityConnect to single-fibre networking devices including simplex patch panels, SFP transceivers, and fibre NICs. This 9/125m OS2 simplex single mode fibre patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC) -polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.

GBP 17.99
1

JanSan Refuse Sacks Medium Duty 90L 15kg - Yellow - Pack of 200

JanSan Refuse Sacks Medium Duty 90L 15kg - Yellow - Pack of 200

These JanSan Medium Duty 90L CHSA 15kg Yellow Refuse Sacks are manufactured in the UK from 100% recycled polythene with puncture and tear-resistant qualities. Polythene allows you to separate waste from different areas, such as kitchens and toilets, increasing hygiene and reducing cross-contamination. These Medium-duty bin bags are perfect for bar areas, holding up to 15kg of waste.Thanks to its strong, polythene material, these Medium-duty bin bags are suitable for holding up to 15kg of waste - allowing your staff to safely dispose of Medium-duty domestic and food waste, without the risk of ripping and spreading harmful bacteria or hazardous materials.Plus, the 90Ltr capacity gives you plenty of room for your waste too - cutting down on the amount of times that your staff need to empty your bins. And thanks to the huge box quantity of 200, each pack will also last you far longer. This will not only stretch your money that little bit further, but it'll also ensure you've always got bin bags on hand for when you need them most!JanSan Medium Duty 90L CHSA 15kg Yellow Refuse Sack Features: Material Recycled Polythene. 15kg weight capacity allows the bags to safely hold Medium Duty domestic and food waste. A bumper box quantity of 200 means each pack will last you longer Polythene material means the bags can be recycled for more sustainable waste disposal Tear and puncture-resistant material helps to prevent spills and splits CHSA accreditation ensures the bags conform to a weight drop test and puncture, ripping and tearing measures Yellow colour means that it's perfect for recycling as the colours can be used to distinguish contents.JanSan Medium Duty 90L CHSA 15kg Yellow Refuse Sack Specifications: Colour: Yellow Quantity: 200 Bags Litres: 90L Hold up: 15kg Package Type: Flat-packed Size: 455x735x965mm/18x29x38"

GBP 20.99
1

JanSan Clinical Waste Inceneration Refuse Refuse Sacks Medium Duty 90L 12kg - Yellow - Pack of 200

JanSan Clinical Waste Inceneration Refuse Refuse Sacks Medium Duty 90L 12kg - Yellow - Pack of 200

These JanSan Clinical Waste Incineration 90L 12kg UN Refuse Sacks are manufactured in the UK from 60% recycled polythene with puncture and tear-resistant qualities. Clinical waste for alternative treatment or incineration is classified as Dangerous Goods, sacks for medical waste must be certified to meet the UN packages standard and be marked with a valid certification mark that identifies the type of waste, design weight, year of manufacture, and certificate holder. The Vehicle Certification Agency is the UK authority for the issue of certificates for Approved Dangerous Goods Packaging.Having the UN Accreditation on your clinical waste sacks will ensure these bags with help ensure excellent standards for the safe collection, transportation, treatment, and disposal of healthcare waste. UN coding will help you assist buyers and users of clinical waste bags, helping them to understand and identify genuine UN certificate approval markings, and providing a list of current certificate of packaging approval numbers for reassurance they are buying or using fully compliant bags.JanSan Clinical Waste Refuse Sack Guide:Orange Bags (Infectious Clinical Waste) can be disposed of by;a) Alternative Treatmentb) IncinerationYellow Bags (Medicine, Contaminated & Infectious Clinical Waste) can be disposed of by;a) IncinerationTiger Stripe Bags (Offensive Waste) can be disposed of by;a) Incinerationb) LandfillBlack Bags (General and municipal Waste) can be disposed of by;a) Incinerationb) LandfillNatural Bags (Dry mixed recycling Waste) can be disposed of by;a) Materials Recovery Facility (MRF) JanSan Clinical Waste Incineration 90L 12kg UN Refuse Sacks Features: Material Recycled Polythene 12kg weight capacity allows the bags to safely hold moderate waste A bumper box quantity of 200 means each pack will last you longer Polythene material means the bags can be recycled for more sustainable waste disposal Tear and puncture-resistant material helps to prevent spills and splitsensures the bags conform to a weight drop test and puncture, ripping and tearing measures PPE (gloves, masks aprons) Wipes, dressings, plasters and bandages Incontinence waste Empty saline or glucose IV bags, and tubing (no active medicines added) IV Bags, lines and tubing that have had medicine added Chemically contaminated waste.JanSan Clinical Waste Incineration 90L 12kg UN Refuse Sacks Specifications: Colour: Yellow Quantity: 200 Bags Litres: 90L Hold up: 12kg Package Type: Flat-packed Size: 455x735x965mm/18x29x38"

GBP 26.99
1