281 results (0,15582 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Scope RTESTPB Range Testing Kit For Pendant PEN4 Wave Track amp PB1BPB2B Panic Buttons With Transponder

Scope RTESTPB Range Testing Kit For Pendant PEN4 Wave Track amp PB1BPB2B Panic Buttons With Transponder

RTESTPB Range Testing Kit For Pendant PEN4 Wave Track PB1BPB2B Panic Buttons With TransponderA Range Testing Kit For Pendant PEN4 Wave Track PB1BPB2B Panic Buttons With Transponder.The kit contains1 x PB1B single-button transmitter 25mW RF output with Listen Before Transmit LBT1 x MPA pendant MK4 transmitter 10mW RF output1 xEPOC-S responder two-way Critical Alert Communicator 25mW RF output1 x Test synthesized receiver1 x Test paging transmitter1 x RS232 null modem cable2 x wave aerials2 x lightweight dipole aerial with lead2 x heavy duty folded dipole aerial2 x aerial lead

GBP 1213.68
1

808 Plus Engineer Starter Testing Kit 4 Metres

808 Plus Engineer Starter Testing Kit 4 Metres

808 Plus Engineer Starter Testing Kit 4 MetresSolo 808 - Solo equipment is available in a number of conveniently arranged kits. Whether your need is for a simple starter kit a universal smoke testing kit or an all encompassing kit including a heat detector tester there is one available. Larger kits are supplied with a purpose designed carry -bag storage case which holds all the tools an engineer needs for testing - not just practical but also giving a professional image when arriving on site.ACT 612 - Simulates a full 20 hour battery discharge test in seconds. The ACT612 is a dual voltage intelligent battery tester designed for 6V and 12V lead acid batteries from 1.2Ah to 100Ah making it capable of testing 12V batteries up to 150Ah. Its the only product of its kind to have an Ampere-hour Ah calibration control enabling Ah readings to be adjusted to suit various battery technologies including standby SLA AGM cyclic GEL and car FLOODED WET batteries. Not manufactured by No Climb products.Call Point Test Set - The call point key set is an essential must have for every fire alarm engineer on site who work alongside a wide variety of call points so you wont be left in the dark on that all-important job. Our key set has been designed to include the most common call point test keys used in a wide range of different fire alarm systems which have been installed into buildings all around the world. Not manufactured by No Climb products.Kit Contains1 x Solo 330 Aerosol Smoke Dispenser1 x Solo 108 2.5m Fibreglass Extension Pole1 x Solo A10 Aerosol 150ml non-flammable1 x ACT 612v Intelligent Battery Tester Not manufactured by No Climb products.1 x Call Point Test Key Set Not manufactured by No Climb products.Call Point Test Key Set Contains1 x KAC Standard Manual Call Point Key1 x Gent SMS S4-34899 Vigilon S-Quad Fire Alarm Manual Call Point Key1 x Gent SMS 14112-12 Old Style Gent Call Point Key1 x Menvier MFBGKEY3 Key for New Style Menvier Call Points1 x Menvier MFBGKEY2 Key for Old Style Menvier Call Points1 x Apollo 44251-176APO Key for New Style Apollo Manual Call Points1 x Fike 45-0022-S Manual Call Point Test Key1 x Howler CPK02 Pin Style Call Point Test Key1 x Aico STI Nittan MCPSK2 Spare Key for Call Points

GBP 821.17
1

810 Plus Engineer Starter Testing Kit 2.5 Metres

810 Plus Engineer Starter Testing Kit 2.5 Metres

810 Plus Engineer Testing Kit 2.5 MetresSolo 810 - Solo equipment is available in a number of conveniently arranged kits. Whether your need is for a simple starter kit a universal smoke testing kit or an all encompassing kit including a heat detector tester there is one available. Larger kits are supplied with a purpose designed carry -bag storage case which holds all the tools an engineer needs for testing - not just practical but also giving a professional image when arriving on site.ACT 612 - Simulates a full 20 hour battery discharge test in seconds. The ACT612 is a dual voltage intelligent battery tester designed for 6V and 12V lead acid batteries from 1.2Ah to 100Ah making it capable of testing 12V batteries up to 150Ah. Its the only product of its kind to have an Ampere-hour Ah calibration control enabling Ah readings to be adjusted to suit various battery technologies including standby SLA AGM cyclic GEL and car FLOODED WET batteries. Not manufactured by No Climb products.Call Point Test Set - The call point key set is an essential must have for every fire alarm engineer on site who work alongside a wide variety of call points so you wont be left in the dark on that all-important job. Our key set has been designed to include the most common call point test keys used in a wide range of different fire alarm systems which have been installed into buildings all around the world. Not manufactured by No Climb products.Kit Contains1 x Solo 330 Aerosol Smoke Dispenser1 x Solo 101 1.13m Fibreglass Extension Pole1 x Solo A10 Aerosol 150ml non-flammable1 x ACT 612v Intelligent Battery Tester Not manufactured by No Climb products.1 x Call Point Test Key Set Not manufactured by No Climb products.Call Point Test Key Set Contains1 x KAC Standard Manual Call Point Key1 x Gent SMS S4-34899 Vigilon S-Quad Fire Alarm Manual Call Point Key1 x Gent SMS 14112-12 Old Style Gent Call Point Key1 x Menvier MFBGKEY3 Key for New Style Menvier Call Points1 x Menvier MFBGKEY2 Key for Old Style Menvier Call Points1 x Apollo 44251-176APO Key for New Style Apollo Manual Call Points1 x Fike 45-0022-S Manual Call Point Test Key1 x Howler CPK02 Pin Style Call Point Test Key1 x Aico STI Nittan MCPSK2 Spare Key for Call Points

GBP 669.40
1

809 Plus Engineer Starter Testing Kit 6 Metres

809 Plus Engineer Starter Testing Kit 6 Metres

809 Plus Engineer Starter Testing Kit 6 MetresSolo 809 - Solo equipment is available in a number of conveniently arranged kits. Whether your need is for a simple starter kit a universal smoke testing kit or an all encompassing kit including a heat detector tester there is one available. Larger kits are supplied with a purpose designed carry -bag storage case which holds all the tools an engineer needs for testing - not just practical but also giving a professional image when arriving on site.ACT 612 - Simulates a full 20 hour battery discharge test in seconds. The ACT612 is a dual voltage intelligent battery tester designed for 6V and 12V lead acid batteries from 1.2Ah to 100Ah making it capable of testing 12V batteries up to 150Ah. Its the only product of its kind to have an Ampere-hour Ah calibration control enabling Ah readings to be adjusted to suit various battery technologies including standby SLA AGM cyclic GEL and car FLOODED WET batteries. Not manufactured by No Climb products.Call Point Test Set - The call point key set is an essential must have for every fire alarm engineer on site who work alongside a wide variety of call points so you wont be left in the dark on that all-important job. Our key set has been designed to include the most common call point test keys used in a wide range of different fire alarm systems which have been installed into buildings all around the world. Not manufactured by No Climb products.Kit Contains1 x Solo 330 Aerosol Smoke Dispenser1 x Solo 100 4.5m Fibreglass 4 Section Extension Pole1 x Solo A10 Aerosol 150ml non-flammable1 x ACT 612v Intelligent Battery Tester Not manufactured by No Climb products.1 x Call Point Test Key Set Not manufactured by No Climb products.Call Point Test Key Set Contains1 x KAC Standard Manual Call Point Key1 x Gent SMS S4-34899 Vigilon S-Quad Fire Alarm Manual Call Point Key1 x Gent SMS 14112-12 Old Style Gent Call Point Key1 x Menvier MFBGKEY3 Key for New Style Menvier Call Points1 x Menvier MFBGKEY2 Key for Old Style Menvier Call Points1 x Apollo 44251-176APO Key for New Style Apollo Manual Call Points1 x Fike 45-0022-S Manual Call Point Test Key1 x Howler CPK02 Pin Style Call Point Test Key1 x Aico STI Nittan MCPSK2 Spare Key for Call Points

GBP 1095.17
1

822 Plus Engineer Starter Testing Kit 6 Metres

822 Plus Engineer Starter Testing Kit 6 Metres

822 Plus Engineer Starter Testing Kit 6 MetresSolo 822 - Solo equipment is available in a number of conveniently arranged kits. Whether your need is for a simple starter kit a universal smoke testing kit or an all encompassing kit including a heat detector tester there is one available. Larger kits are supplied with a purpose designed carry -bag storage case which holds all the tools an engineer needs for testing - not just practical but also giving a professional image when arriving on site.ACT 612 - Simulates a full 20 hour battery discharge test in seconds. The ACT612 is a dual voltage intelligent battery tester designed for 6V and 12V lead acid batteries from 1.2Ah to 100Ah making it capable of testing 12V batteries up to 150Ah. Its the only product of its kind to have an Ampere-hour Ah calibration control enabling Ah readings to be adjusted to suit various battery technologies including standby SLA AGM cyclic GEL and car FLOODED WET batteries. Not manufactured by No Climb products.Call Point Test Set - The call point key set is an essential must have for every fire alarm engineer on site who work alongside a wide variety of call points so you wont be left in the dark on that all-important job. Our key set has been designed to include the most common call point test keys used in a wide range of different fire alarm systems which have been installed into buildings all around the world. Not manufactured by No Climb products.Kit Contains1 x Solo 100 Fibreglass 4 Section Telescopic Pole 4.5 metres1x Solo 200 Universal Detector Removal Tool1 x Solo 330 Aerosol Smoke Dispenser1 x Solo 610 Protective Carrying Storage Bag1 x Solo A10 Aerosol 150ml non-flammable1 x Solo 461 Cordless Heat Detector Tester Kit contains 1 x Solo 460 Heat Detector Head Unit 1 x Solo 770 Cordless Heat Detector Tester Battery Baton option to buy second baton in the drop-down box and 1 x Solo 727 Cordless Heat Detector 240V Mains Car Charger1 x ACT 612v Intelligent Battery Tester Not manufactured by No Climb products.1 x Call Point Test Key Set Not manufactured by No Climb products.Call Point Test Key Set Contains1 x KAC Standard Manual Call Point Key1 x Gent SMS S4-34899 Vigilon S-Quad Fire Alarm Manual Call Point Key1 x Gent SMS 14112-12 Old Style Gent Call Point Key1 x Menvier MFBGKEY3 Key for New Style Menvier Call Points1 x Menvier MFBGKEY2 Key for Old Style Menvier Call Points1 x Apollo 44251-176APO Key for New Style Apollo Manual Call Points1 x Fike 45-0022-S Manual Call Point Test Key1 x Howler CPK02 Pin Style Call Point Test Key1 x Aico STI Nittan MCPSK2 Spare Key for Call Points

GBP 2726.32
1

823 Plus Engineer Starter Testing Kit 9.3 Metres

823 Plus Engineer Starter Testing Kit 9.3 Metres

823 Plus Engineer Starter Testing Kit 9.3 MetresSolo 823 - Solo equipment is available in a number of conveniently arranged kits. Whether your need is for a simple starter kit a universal smoke testing kit or an all encompassing kit including a heat detector tester there is one available. Larger kits are supplied with a purpose designed carry -bag storage case which holds all the tools an engineer needs for testing - not just practical but also giving a professional image when arriving on site.ACT 612 - Simulates a full 20 hour battery discharge test in seconds. The ACT612 is a dual voltage intelligent battery tester designed for 6V and 12V lead acid batteries from 1.2Ah to 100Ah making it capable of testing 12V batteries up to 150Ah. Its the only product of its kind to have an Ampere-hour Ah calibration control enabling Ah readings to be adjusted to suit various battery technologies including standby SLA AGM cyclic GEL and car FLOODED WET batteries. Not manufactured by No Climb products.Call Point Test Set - The call point key set is an essential must have for every fire alarm engineer on site who work alongside a wide variety of call points so you wont be left in the dark on that all-important job. Our key set has been designed to include the most common call point test keys used in a wide range of different fire alarm systems which have been installed into buildings all around the world. Not manufactured by No Climb products.Kit Contains1 x Solo 100 Fibreglass 4 Section Telescopic Pole 4.5 metres3 x Solo 101 Fibreglass Extension Pole 1.13 metres1 x Solo 200 Universal Detector Removal Tool1 x Solo 330 Aerosol Smoke Dispenser1 x Solo 610 Protective Carrying Storage Bag1 x Solo A10 Aerosol 150ml non-flammable1 x Solo 461 Cordless Heat Detector Tester Kit contains 1 x Solo 460 Heat Detector Head Unit 1 x Solo 770 Cordless Heat Detector Tester Battery Baton option to buy second baton in the drop-down box and 1 x Solo 727 Cordless Heat Detector 240V Mains Car Charger1 x ACT 612v Intelligent Battery Tester Not manufactured by No Climb products.1 x Call Point Test Key Set Not manufactured by No Climb products.Call Point Test Key Set Contains1 x KAC Standard Manual Call Point Key1 x Gent SMS S4-34899 Vigilon S-Quad Fire Alarm Manual Call Point Key1 x Gent SMS 14112-12 Old Style Gent Call Point Key1 x Menvier MFBGKEY3 Key for New Style Menvier Call Points1 x Menvier MFBGKEY2 Key for Old Style Menvier Call Points1 x Apollo 44251-176APO Key for New Style Apollo Manual Call Points1 x Fike 45-0022-S Manual Call Point Test Key1 x Howler CPK02 Pin Style Call Point Test Key1 x Aico STI Nittan MCPSK2 Spare Key for Call Points

GBP 3141.91
1

Solo 808 Smoke Detector Test Starter Kit 4 metres

Solo 808 Smoke Detector Test Starter Kit 4 metres

Solo 808 Smoke Detector Test Starter Kit 4 metresSolo equipment is available in a number of conveniently arranged kits. Whether your need is for a simple starter kit a universal smoke testing kit or an all encompassing kit including a heat detector tester there is one available.Larger kits are supplied with a purpose designed carry -bag storage case which holds all the tools an engineer needs for testing - not just practical but also giving a professional image when arriving on site.The Solo 808 is a starter pack for testing smoke detectors up to 4m high. The kit contains1 Solo 330 Aerosol Smoke Dispenser1 Solo 108 2 Section Telescopic Pole 2.5 metres1 Solo A10 Aerosols 150ml non-flammable

GBP 603.61
1

Solo 810 Smoke Detector Test Starter Kit 2.5 metres

Solo 810 Smoke Detector Test Starter Kit 2.5 metres

Solo 810 Smoke Detector Test Starter Kit 2.5 metresSolo equipment is available in a number of conveniently arranged kits. Whether your need is for a simple starter kit a universal smoke testing kit or an all encompassing kit including a heat detector tester there is one available.Larger kits are supplied with a purpose designed carry -bag storage case which holds all the tools an engineer needs for testing - not just practical but also giving a professional image when arriving on site.The Solo 810 is a starter pack for testing smoke detectors at normal ceiling height. The kit contains1 Solo 330 Aerosol Smoke Dispenser1 Solo 101 1.13m Fibreglass Extension Pole1 Solo A10 Aerosol 150ml non-flammable

GBP 451.84
1

Solo 809 Smoke Detector Test Starter Kit 6 metres

Solo 809 Smoke Detector Test Starter Kit 6 metres

Solo 809 Smoke Detector Test Starter Kit 6 metresSolo equipment is available in a number of conveniently arranged kits. Whether your need is for a simple starter kit a universal smoke testing kit or an all encompassing kit including a heat detector tester there is one available.Larger kits are supplied with a purpose designed carry -bag storage case which holds all the tools an engineer needs for testing - not just practical but also giving a professional image when arriving on site.The Solo 809 is a starter pack for testing smoke detectors fitted up to 6 metres high. The kit contains1 Solo 330 Aerosol Smoke Dispenser1 Solo 100 Fibreglass 4 Section Telescopic Pole 4.5 metres1 Solo A10 Aerosol 150ml non-flammable

GBP 877.61
1

Solo 908 Electronic Smoke Detector Test Kit 4 Metres

Solo 908 Electronic Smoke Detector Test Kit 4 Metres

Solo 908 Electronic Smoke Detector Test Kit 4 MetresA simple smoke detector test kit including access pole for testing detectors at heights up to 6 metres.Solo 365 is an exciting new innovation for testing smoke detectors. It offers everything the industry expects from the popular Solo brand pairing it with the very latest technology and wrapping it in a new modern slim-line design.Key FeaturesAuto-start proximity sensor faster testing less smoke wasteAuto-LED torch allows simple testing of detectors in dark areasSlim-line design easier access to detectors in confined spacesClearing mode eliminates re-alarms increasing productivityDelayed start mode for non-standard detectors and ASD systemsThe detector friendly smoke generated via non-pressurised capsules is compatible with the widest range of detectors and offers improved performance at low temperatures. Solo 365 is 15 lighter than the traditional Solo dispenser supporting easier movement around site and when testing.Kit Contains1 x Solo 365 Smoke Detector Test Kit which contains 1x Solo 365 Head Unit 1x Solo 370 Battery Pack 1x Solo 371 Smoke Generator 1x ES3 Smoke Cartridge 1x Spare 1060 Charger USB Lead1 x Solo 108 Access Pole 2.5m

GBP 1197.36
1

Solo 909 Electronic Smoke Detector Test Kit 6 Metres

Solo 909 Electronic Smoke Detector Test Kit 6 Metres

Solo 909 Electronic Smoke Detector Test Kit 6 MetresA simple smoke detector test kit including access pole for testing detectors at heights up to 6 metres.Solo 365 is an exciting new innovation for testing smoke detectors. It offers everything the industry expects from the popular Solo brand pairing it with the very latest technology and wrapping it in a new modern slim-line design.Key FeaturesAuto-start proximity sensor faster testing less smoke wasteAuto-LED torch allows simple testing of detectors in dark areasSlim-line design easier access to detectors in confined spacesClearing mode eliminates re-alarms increasing productivityDelayed start mode for non-standard detectors and ASD systemsThe detector friendly smoke generated via non-pressurised capsules is compatible with the widest range of detectors and offers improved performance at low temperatures. Solo 365 is 15 lighter than the traditional Solo dispenser supporting easier movement around site and when testing.Kit Contains1 x Solo 365 Smoke Detector Test Kit which contains 1x Solo 365 Head Unit 1x Solo 370 Battery Pack 1x Solo 371 Smoke Generator 1x ES3 Smoke Cartridge 1x Spare 1060 Charger USB Lead1 x Solo 100 Access Pole 4.5m

GBP 1496.36
1

Fike FIK-FSIM-IR3-KIT Flame Simulator Kit IR3

Fike FIK-FSIM-IR3-KIT Flame Simulator Kit IR3

Fike FIK-FSIM-IR3-KIT Flame Simulator Kit IR3Flame simulators are often used by industry to perform detector testing during commissioning and periodic system testing. The FlameSpec simulators are inexpensive lightweight and simple to use. The modern ergonomic design with alignment markers allows accurate fast and convenient detector performance verification. Suitable for use in hazardous areas the FlameSpec simulators can be used at distances of up to 23.0 feet 7.0 meters from the detector.Three different models are available for testing each type of flame detector IR3 IR3H2 and UVIR.All Fike flame detectors perform automatic selftests of their optics windows electronics and software. Additionally the Fike flame detectors can be manually put into alarm via the detectors communicator software or by short circuiting the Manual BIT terminal and the 24 VDC terminal for one second. The FlameSpec flame test simulators are designed to complement these inbuilt features by providing a fully external loop test capability.Key FeaturesComplementary to Fikes Flame Detector inbuilt test features Enables full end toend system testInexpensive lightweight and simple to use Reduced initial cost and ongoing maintenance costsActivation of test from up to 23 feet 7 meters Reduces the need for scaffoldingHazardous area use approved No timeconsuming hot work permit requiredMore than 1000 activations between charges Ready to use when you areIncludes carrying strap protective storage case battery charger and operating instructions Easy to transport and supplied with everything you need

GBP 4931.93
1

Solo 900 Electronic Smoke Detector Test amp Removal Kit 9.3 Metres

Solo 900 Electronic Smoke Detector Test amp Removal Kit 9.3 Metres

Solo 900 Electronic Smoke Detector Test Removal Kit 9.3 MetresA smoke detector test kit including removal tool carry case and access pole for accessing detectors at heights up to 9 metres.Solo 365 is an exciting new innovation for testing smoke detectors. It offers everything the industry expects from the popular Solo brand pairing it with the very latest technology and wrapping it in a new modern slim-line design.Key FeaturesAuto-start proximity sensor faster testing less smoke wasteAuto-LED torch allows simple testing of detectors in dark areasSlim-line design easier access to detectors in confined spacesClearing mode eliminates re-alarms increasing productivityDelayed start mode for non-standard detectors and ASD systemsThe detector friendly smoke generated via non-pressurised capsules is compatible with the widest range of detectors and offers improved performance at low temperatures. Solo 365 is 15 lighter than the traditional Solo dispenser supporting easier movement around site and when testing.Kit Contains1 x Solo 365 Smoke Detector Test Kit which contains 1x Solo 365 Head Unit 1x Solo 370 Battery Pack 1x Solo 371 Smoke Generator 1x ES3 Smoke Cartridge 1x Spare 1060 Charger USB Lead1 x Solo 100 Access Pole 4.5m3 x Solo 101 Extension Pole 1.13m1 x Solo 200 Universal Head Removal Tool1 x Solo 610 Storage Bag Carry Case

GBP 2501.63
1

Fike FIK-FSIM-IR3-H2-KIT Flame Simulator Kit IR3-H2

Fike FIK-FSIM-IR3-H2-KIT Flame Simulator Kit IR3-H2

Fike FIK-FSIM-IR3-H2-KIT Flame Simulator Kit IR3-H2Flame simulators are often used by industry to perform detector testing during commissioning and periodic system testing. The FlameSpec simulators are inexpensive lightweight and simple to use. The modern ergonomic design with alignment markers allows accurate fast and convenient detector performance verification. Suitable for use in hazardous areas the FlameSpec simulators can be used at distances of up to 23.0 feet 7.0 meters from the detector.Three different models are available for testing each type of flame detector IR3 IR3H2 and UVIR.All Fike flame detectors perform automatic selftests of their optics windows electronics and software. Additionally the Fike flame detectors can be manually put into alarm via the detectors communicator software or by short circuiting the Manual BIT terminal and the 24 VDC terminal for one second. The FlameSpec flame test simulators are designed to complement these inbuilt features by providing a fully external loop test capability.Key FeaturesComplementary to Fikes Flame Detector inbuilt test features Enables full end toend system testInexpensive lightweight and simple to use Reduced initial cost and ongoing maintenance costsActivation of test from up to 23 feet 7 meters Reduces the need for scaffoldingHazardous area use approved No timeconsuming hot work permit requiredMore than 1000 activations between charges Ready to use when you areIncludes carrying strap protective storage case battery charger and operating instructions Easy to transport and supplied with everything you need

GBP 4931.93
1

Fike FIK-FSIM-UV-IR-KIT Flame Simulator Kit UV-IR

Fike FIK-FSIM-UV-IR-KIT Flame Simulator Kit UV-IR

Fike FIK-FSIM-UV-IR-KIT Flame Simulator Kit UV-IRThis simulator kit includes a flame simulator for the UV-IR flame detector aluminium a simulator carrying case and strap a cover tool and a charger. The UV-IR monitor detects a large variety of fires including hydrocarbon fires visible and non-visible and Hydrogen fires.These Flame Simulators are designed to test flame detectors and ensure they are performing accurately and adequately. The flame simulators are economic and ideal for ongoing maintenance. They are lightweight and very easy to use. They can be used in a hazardous area and can test in distances of up to 23 feet away from the detectors reducing the need for scaffolding.They are ideal for applications where commissioning and periodic system testing is required for the detectors. There are other versions available. Please refer to the datasheet for additional information on detector sensitivities operational distances and electrical specifications.Key FeaturesMore than 1000 activations between charges so uptime is highPerforms automatic self-tests of optics windows electronics and softwareCan be manually put into alarm through FGD communicator software or by short-circuiting the Manual BIT terminal24 VDC terminal for one secondDesigned to complement inbuilt features by providing a full external loop test capability

GBP 4931.93
1

Solo 811 Smoke Detector Test amp Removal Set 6 metres

Solo 811 Smoke Detector Test amp Removal Set 6 metres

Solo 811 Smoke Detector Test Removal Set 6 metresSolo equipment is available in a number of conveniently arranged kits. Whether your need is for a simple starter kit a universal smoke testing kit or an all encompassing kit including a heat detector tester there is one available.Larger kits are supplied with a purpose designed carry -bag storage case which holds all the tools an engineer needs for testing - not just practical but also giving a professional image when arriving on site.The Solo 811 is a universal set for testing and removing smoke detectors fitted up to 6 metres. The kit contains1 Solo 100 Fibreglass 4 Section Telescopic Pole 4.5 metres1 Solo 200 Universal Detector Removal Tool1 Solo 330 Aerosol Smoke Dispenser1 Solo 600 Protective Carrying Storage Bag1 Solo A10 Aerosol 150ml non-flammable

GBP 1541.56
1

Solo 814 Smoke amp Mains Heat Detector Test Set 6 metres

Solo 814 Smoke amp Mains Heat Detector Test Set 6 metres

Solo 814 Smoke Mains Heat Detector Test Set 6 metresSolo equipment is available in a number of conveniently arranged kits. Whether your need is for a simple starter kit a universal smoke testing kit or an all encompassing kit including a heat detector tester there is one available.Larger kits are supplied with a purpose designed carry -bag storage case which holds all the tools an engineer needs for testing - not just practical but also giving a professional image when arriving on site.The Solo 814 is a universal set for testing and removing smoke detectors and heat detectors fitted up to 6 metres. The kit contains1 Solo 100 Fibreglass 4 Section Telescopic Pole 4.5 metres1 Solo 200 Universal Detector Removal Tool1 Solo 330 Aerosol Smoke Dispenser1 Solo 424 220240v Heat Detector Tester1 Solo 600 Protective Carrying Storage Bag1 Solo A10 Aerosol 150ml non-flammable

GBP 2307.76
1

Solo 812 Smoke Detector Test amp Removal Set 8.2 metres

Solo 812 Smoke Detector Test amp Removal Set 8.2 metres

Solo 812 Smoke Detector Test Removal Set 8.2 metresSolo equipment is available in a number of conveniently arranged kits. Whether your need is for a simple starter kit a universal smoke testing kit or an all encompassing kit including a heat detector tester there is one available.Larger kits are supplied with a purpose designed carry -bag storage case which holds all the tools an engineer needs for testing - not just practical but also giving a professional image when arriving on site.The Solo 812 is a universal set for testing and removing smoke detectors fitted up to 8.2 metres. The kit contains1 Solo 100 Fibreglass 4 Section Telescopic Pole 4.5 metres2 Solo 101 1.13m Fibreglass Extension Pole1 Solo 200 Universal Detector Removal Tool1 Solo 330 Aerosol Smoke Dispenser1 Solo 600 Protective Carrying Storage Bag1 Solo A10 Aerosol 150ml non-flammable

GBP 1818.61
1

Notifier PRN-ID Printer Kit for ID61 ID62 ID2000 ID3000 020-644-009

Notifier PRN-ID Printer Kit for ID61 ID62 ID2000 ID3000 020-644-009

Notifier PRN-ID Printer Kit for ID61 ID62 ID2000 ID3000 020-644-009The Notifier 020-644-009 is a printer kit designed for use with the Notifier ID3000 fire alarm control panel. The printer option on the panel is ideal for printing out a hard copy of the events on the fire alarm system. The Notifier 020-644-009 Printer option is great for both End Users and Fire Alarm System engineers as hard copies can be kept of commissioning maintenance and weekly testing events.When used with the Notifier ID3000 Panel this printer kit is designed to be mounted on an extension chassis. The extension chassis is designed to be installed into an extended backbox which is specially designed to accommodate an extension chassis. TheNotifier 020-644-009 PrinterKit is also compatible with the Notifier ID2000 ID61 and ID62 Control Panels.

GBP 739.81
1