ProfitSpring | B2B PPC Agency

Aritech DF962 Gate Disconnect Assembly Kit For Sliding Gates

Aritech DF962 Gate Disconnect Assembly Kit For Sliding GatesThe DF862 gate disconnect assembly protects gates that are infrequently used. The gate can be opened and closed by manually separating the connection. When the assembly is opened a supervision alarm is generated. When the assembly is closed the gate is protected and secure.Key FeaturesSimple to installAvoid trenching or using non-sensitive cableContinual protection on gatesPerfect for infrequently used access points

GBP 1159.98

1

Wagner AD-10-5230 Detector Module TT for ProSensnet amp Silent

Wagner AD-10-5230 Detector Module TT for ProSensnet SilentThe AD-10-5230 is a detector module TT which has been designed for use with ProSensnet. It features a super high sensitivity four sensitivity levels 0.015 m 0.03 m 0.06 m 0.12 m and supports up to 32 air sampling openings for each detector module.Titanus ProSensnet is Wagners universal air sampling smoke detector for monitoring large areas of up to 6000 m.By combining cutting-edge HPLS light technology with the patented LogicSens smoke development pattern recognition Titanus ProSensnet provides maximum sensitivity and immunity to false alarms at the same time even under tough conditions.The use of a second detector module enables the establishment of dual detector dependency or monitoring of a second independent area.Key FeaturesSensitivity adjustable down to 0.015 light obscurationm in main alarm depending on detector moduleUp to two detector modules with up to three alarm stages each can be evaluatedPrepared for accepting a network card for linking via Ethernet or SNMPUp to 1 x 100 or 2 x 72 air sampling points depending on versionOptional connection of remote display unitsTitanusProSensnet is available in the following versionsStandardCold Storage -F usable at temperatures down to -40 CSilent SL at 23 dB A and up for noise-sensitive areas

GBP 1241.58

1

Zeta VDOT-ASD-100 Single Zone Aspirating Smoke Detector

Zeta VDOT-ASD-100 Single Zone Aspirating Smoke DetectorThe VDOT-ASD-100 uses high power short wavelength blue LED as the detection light source. It is very sensitive to small smoke particles generated during the incipient stage of a fire at which time can still remain invisible to the human eye.The highest alarm sensitivity of the VDOT-ASD-100 high sensitivity smoke detector is 0.005m which is 1000 times more sensitive to conventional point type smoke detector.Key FeaturesFour Alarm Levels7 Relay Outputs3 in 1 ControlDisplayProgrammer Front PanelRS485 NetworkSupport Modbus RTU Open Protocol

GBP 1453.57

1

Zeta VDOT-ASD-400 Four Pipes Scanning Aspirating Smoke Detector

Zeta VDOT-ASD-400 Four Pipes Scanning Aspirating Smoke DetectorThe VDOT-ASD-400 uses high power short wavelength blue LED as the detection light source. It is very sensitive to small smoke particles generated during the incipient stage of a fire at which time can still remain invisible to the human eye.The highest alarm sensitivity of the VDOT-ASD-400 high sensitivity smoke detector is 0.005m which is 1000 times more sensitive to conventional point type smoke detector.Key FeaturesFour Alarm Levels7 Relay Outputs3 in 1 ControlDisplayProgrammer Front PanelRS485 NetworkSupport Modbus RTU Open Protocol

GBP 2510.62

1

Protec Cirrus Pro 200 Aspiration Detector EN54-20 Approved

Protec Cirrus Pro 200 Aspiration Detector EN54-20 ApprovedCirrus Pro Series Aspirating Fire Detectors provide a solution for almost any aspirating system project from a simple single pipe detector with minimum Fire and Fault LED indications to a multiple pipe scanning detector with multifunction quarter VGA backlit LCD display. Programming for each detector is via a laptop computer or from an onboard or remotely mounted LCD display.The sensitivity range is the key feature that makes the Cirrus Pro Series Fire Detector the worlds most versatile fire detection device. For over 20 years Cloud Chamber detectors have been known as the most sensitive fire detection device able to detect at the true incipient stage of a developing fire. The New Cirrus Pro Series Detectors have a vast sensitivity range capable of being even more sensitive than previous versions. In addition the detector may now be configured to be installed in heavily contaminated environments such as polluted production and warehousing facilities.High Sensitivity Applications includeComputer Rooms Clean Rooms Control Rooms Data Centres Valve Halls Archive Storage Anechoic Chambers EDP areas.General Sensitivity Applications includeHistoric Buildings Museums Hospitals Cathedrals Theatres Art Galleries Clean Warehouses Atria Indoor Stadiums.Harsh Environment Applications includeCold Storage Facilities Specialist Production Facilities Food Industry Facilities Paper Production Facilities Transportation Terminals Flight Simulators Aircraft Hangers Prisons Inaccessible Voids Dirty Warehouses.Key FeaturesCloud Chamber Detection PrincipleUp to 200 mtrs Sampling PipeProgrammable Pre-Alarm warning condition3 Programmable Fire warning conditionsAirflow MonitoringFault Diagnostic featureImmune to dust humidity temperature changesEN54-20 ApprovedFor use with up to a total of 200mtrs of 25mm diameter sampling pipeFour sampling pipe inlet ports single sampling pipe exhaust portLED status indication of Common Fault Power Pre-alarm Fire 1 Fire 2 Fire 3 alarm conditionsInternal buzzer Silence button detector alarm Reset ButtonMay be networked with other Cirrus Pro Series aspirating detectors

GBP 3223.80

1

Ziton ZR4ST-3 ZR4 Series 868 MHz Site Survey Tool for Wireless Installations

Ziton ZR4ST-3 ZR4 Series 868 MHz Site Survey Tool for Wireless InstallationsThe ZR4ST-3 is a portable radio survey kit to assist in the validation of an 868 MHz wireless fire alarm system prior to installation. A site survey is always required prior to installation for all wireless devices to ensure full system operability after installation.Operating PrincipleFire systems are often required in buildings where cable wiring presents a challenge because the fabric of the building or where the interior design would be negatively affected by the use of cables. It could also be difficult to introduce cable runs into old buildings that were not designed with a modern cable infrastructure. It is in these architecturally sensitive buildings that wireless fire detection is ideal.The ZR4ST-3 survey tool helps establish the viability of a wireless installation in such buildings by allowing a pre-installation survey to be conducted within the standard operating parameters of the system. The ZR4ST-3 confirms the signal strength at every desired location and helps with the overall system design by providing clear go no-go location information.The RangeA typical 868 MHz fire system may consist ofWired or wireless interface modulesWireless fire detectorsWireless notification devicesWireless detectornotification device combinationsWireless manual call pointsWireless inputoutput modulesAll of these require validation for signal strength prior to installation.

GBP 647.00

1

2Kg Commander Clean Agent Extinguisher SE04

2Kg Commander Clean Agent ExtinguisherSE04A clean agent extinguisher is an environmentally friendly solution that works by smothering the fire. It doesnt leave behind a residue or damage electrical equipment. This type of extinguisher is suitable for use on Class B and C fires as well as electrical fires.Clean agent extinguishers are designed for use on sensitive machinery and watercraft.This 2kg extinguisher is compact in its design and is the ideal replacement for Halon units.Key FeaturesCompact designBracket and stainless steel strap included

GBP 554.87

1

Fireclass 516.016.171FC ProReact EN LHD Cable - 78C - 500m Reel

Fireclass 516.016.171FC ProReact EN LHD Cable - 78C - 500m ReelFireclass ProReacts EN Digital Linear Heat Detection LHD cable uses fixed temperature detection technology to provide a straightforward method for sensing changes in temperature. The cable can off er alternative overheat protection in a vast range of applications and environments from tunnels cable trays warehousing to sensing changes in temperature within escalators and other applications where many risks of fi re are hidden from view.ProReact EN Digital LHD cable is a non-resettable line-type heat detector. The two twisted cores and held apart by an advanced temperature sensitive polymer. At a temperature set by the manufacturing processes of the cable the temperature sensitive polymer surrounding the two cores softens allowing the cores to come into contact. This is an irreversible process and once the cable has activated the section which has triggered must be cut out and replaced not the whole cable.Key FeaturesTemperature 78CMaterial PVCLength 500m

GBP 1350.00

1

Fireclass 516.016.173FC ProReact EN LHD Cable - 88C - 500m Reel

Fireclass 516.016.173FC ProReact EN LHD Cable - 88C - 500m ReelFireclass ProReacts EN Digital Linear Heat Detection LHD cable uses fixed temperature detection technology to provide a straightforward method for sensing changes in temperature. The cable can off er alternative overheat protection in a vast range of applications and environments from tunnels cable trays warehousing to sensing changes in temperature within escalators and other applications where many risks of fi re are hidden from view.ProReact EN Digital LHD cable is a non-resettable line-type heat detector. The two twisted cores and held apart by an advanced temperature sensitive polymer. At a temperature set by the manufacturing processes of the cable the temperature sensitive polymer surrounding the two cores softens allowing the cores to come into contact. This is an irreversible process and once the cable has activated the section which has triggered must be cut out and replaced not the whole cable.Key FeaturesTemperature 88CMaterial PVCLength 500m

GBP 1350.00

1

Vesda Sensepoint XCL XCL-VEA-CH4-RA-5 Methane CH4 0-100 LEL 4-20mA Relays - Pack of 5

Vesda Sensepoint XCL XCL-VEA-CH4-RA-5 Methane CH4 0-100 LEL 4-20mA Relays - Pack of 5Xtralis has developed with its sister company Honeywell Analytics a new concept of aspirated gas detectors. When used with the VESDA-E VEA VESDA Sensepoint XCL provides early warning of the presence of gases for occupant protection and system monitoring whilst at the same time ensuring protection against fire threats.Through its embedded Bluetooth interface VESDA Sensepoint XCL enables customers to pair the gas detector with their smart device applications to perform installation commissioning and maintenance. This ensures a faster VESDA Sensepoint XCL installation rapid configuration simplicity to operate and simplified maintenance.Key FeaturesAvailable SensorsCarbon Dioxide CO2 0 5000ppmCarbon Dioxide CO2 0 5.0 vvHydrogen H2 0 1000ppmCombustible CAT 0 100 LEL Methane Hydrogen Propane Ethanol Butane Octane etc.Carbon Monoxide CO 0 1000ppmFactory calibrated detectors CAT Factory calibrated to CH4Integral alarm status LEDsBluetooth 4.0 Bluetooth Low EnergyIntegrates with PLCsHVACBMSFACPConfigurable relays4-20 mA analogue outputs or RS 485 Modbus output

GBP 4634.11

1

Vesda Sensepoint XCL XCL-VEA-CO-RA-5 Carbon Monoxide CO 0-300PPM 4-20mA Relays - Pack of 5

Vesda Sensepoint XCL XCL-VEA-CO-RA-5 Carbon Monoxide CO 0-300PPM 4-20mA Relays - Pack of 5Xtralis has developed with its sister company Honeywell Analytics a new concept of aspirated gas detectors. When used with the VESDA-E VEA VESDA Sensepoint XCL provides early warning of the presence of gases for occupant protection and system monitoring whilst at the same time ensuring protection against fire threats.Through its embedded Bluetooth interface VESDA Sensepoint XCL enables customers to pair the gas detector with their smart device applications to perform installation commissioning and maintenance. This ensures a faster VESDA Sensepoint XCL installation rapid configuration simplicity to operate and simplified maintenance.Key FeaturesAvailable SensorsCarbon Monoxide CO 0 1000ppmCombustible CAT 0 100 LEL Methane Hydrogen Propane Ethanol Butane Octane etc.Hydrogen H2 0 1000ppmCarbon Dioxide CO2 0 5.0 vvCarbon Dioxide CO2 0 5000ppmFactory calibrated detectors CAT Factory calibrated to CH4Integral alarm status LEDsBluetooth 4.0 Bluetooth Low EnergyIntegrates with PLCsHVACBMSFACPConfigurable relays4-20 mA analogue outputs or RS 485 Modbus output

GBP 5028.35

1

Vesda Sensepoint XCL XCL-VEA-CH4-RA Methane CH4 0-100 LEL 4-20mA Relays

Vesda Sensepoint XCL XCL-VEA-CH4-RA Methane CH4 0-100 LEL 4-20mA RelaysXtralis has developed with its sister company Honeywell Analytics a new concept of aspirated gas detectors. When used with the VESDA-E VEA VESDA Sensepoint XCL provides early warning of the presence of gases for occupant protection and system monitoring whilst at the same time ensuring protection against fire threats.Through its embedded Bluetooth interface VESDA Sensepoint XCL enables customers to pair the gas detector with their smart device applications to perform installation commissioning and maintenance. This ensures a faster VESDA Sensepoint XCL installation rapid configuration simplicity to operate and simplified maintenance.Key FeaturesAvailable SensorsCarbon Dioxide CO2 0 5000ppmCarbon Dioxide CO2 0 5.0 vvHydrogen H2 0 1000ppmCombustible CAT 0 100 LEL Methane Hydrogen Propane Ethanol Butane Octane etc.Carbon Monoxide CO 0 1000ppmFactory calibrated detectors CAT Factory calibrated to CH4Integral alarm status LEDsBluetooth 4.0 Bluetooth Low EnergyIntegrates with PLCsHVACBMSFACPConfigurable relays4-20 mA analogue outputs or RS 485 Modbus output

GBP 1424.17

1

Vesda Sensepoint XCL XCL-VEA-CO-RA Carbon Monoxide CO 0-300PPM 4-20mA Relays

Vesda Sensepoint XCL XCL-VEA-CO-RA Carbon Monoxide C0 0-300PPM 4-20mA RelaysXtralis has developed with its sister company Honeywell Analytics a new concept of aspirated gas detectors. When used with the VESDA-E VEA VESDA Sensepoint XCL provides early warning of the presence of gases for occupant protection and system monitoring whilst at the same time ensuring protection against fire threats.Through its embedded Bluetooth interface VESDA Sensepoint XCL enables customers to pair the gas detector with their smart device applications to perform installation commissioning and maintenance. This ensures a faster VESDA Sensepoint XCL installation rapid configuration simplicity to operate and simplified maintenance.Key FeaturesAvailable SensorsCarbon Monoxide CO 0 1000ppmCombustible CAT 0 100 LEL Methane Hydrogen Propane Ethanol Butane Octane etc.Hydrogen H2 0 1000ppmCarbon Dioxide CO2 0 5.0 vvCarbon Dioxide CO2 0 5000ppmFactory calibrated detectors CAT Factory calibrated to CH4Integral alarm status LEDsBluetooth 4.0 Bluetooth Low EnergyIntegrates with PLCsHVACBMSFACPConfigurable relays4-20 mA analogue outputs or RS 485 Modbus output

GBP 1283.04

1

Vesda Sensepoint XCL XCL-VEA-CH4-RM Methane CH4 0-100 LEL Modbus amp Relays

Vesda Sensepoint XCL XCL-VEA-CH4-RM Methane CH4 0-100 LEL Modbus RelaysXtralis has developed with its sister company Honeywell Analytics a new concept of aspirated gas detectors. When used with the VESDA-E VEA VESDA Sensepoint XCL provides early warning of the presence of gases for occupant protection and system monitoring whilst at the same time ensuring protection against fire threats.Through its embedded Bluetooth interface VESDA Sensepoint XCL enables customers to pair the gas detector with their smart device applications to perform installation commissioning and maintenance. This ensures a faster VESDA Sensepoint XCL installation rapid configuration simplicity to operate and simplified maintenance.Key FeaturesAvailable SensorsCarbon Monoxide CO 0 1000ppmCombustible CAT 0 100 LEL Methane Hydrogen Propane Ethanol Butane Octane etc.Hydrogen H2 0 1000ppmCarbon Dioxide CO2 0 5.0 vvCarbon Dioxide CO2 0 5000ppmFactory calibrated detectors CAT Factory calibrated to CH4Integral alarm status LEDsBluetooth 4.0 Bluetooth Low EnergyIntegrates with PLCsHVACBMSFACPConfigurable relays4-20 mA analogue outputs or RS 485 Modbus output

GBP 1507.57

1

Aritech SB31 Kit For 2 sided Column View 3m For SB30

Aritech SB31 Kit For 2 sided Column View 3m For SB30A kit for the SB30.Key Features3 m heightTamper switch includedBase and cover includedCover support with clips and guide hoop

GBP 467.95

1

Apollo Intelligent Dual IR Flame Detector 55000-280APO

Apollo Intelligent Dual IR Flame Detector 55000-280APOThe Intelligent IR Flame Detector is designed for use in areas where flaming fires may be expected. The detector has two sensors which respond to different IR wavelengths to discriminate between flames and spurious sources of radiation. Applications include aircraft hangars coal handling and paper manufacturing plants and woodworking environments.Key Features Sensitive to flickering IR radiationDetects through films of oil dust water and iceResponds to flickering flames including those invisible to the naked eyeCompatible with Discovery and XP95 protocolsRemote optical self-test function90 field of viewUp to 40m coverage

GBP 1747.20

1

Apollo Flameproof Intelligent IR2 Flame Detector 55000-295APO

Apollo Flameproof Intelligent IR2 Flame Detector 55000-295APOThe Intelligent IR Flame Detector is designed for use in areas where flaming fires may be expected. The detector has two sensors which respond to different IR wavelengths to discriminate between flames and spurious sources of radiation. Applications include aircraft hangars coal handling and paper manufacturing plants and woodworking environments.Key Features Sensitive to flickering IR radiationDetects through films of oil dust water and iceResponds to flickering flames including those invisible to the naked eyeCompatible with Discovery and XP95 protocolsRemote optical self-test function90 field of viewUp to 40m coverage

GBP 2737.80

1

Apollo Intelligent Flameproof IR3 Flame Detector 55000-021APO

Apollo Intelligent Flameproof IR3 Flame Detector 55000-021APOThe Intelligent Triple IR Flame Detector IR3 is designed to protect areas where open flaming fires may be expected. It is sensitive to low frequency flickering infra-red radiation emitted by flames during combustion.Key Features Loop-poweredSensitive to flickering IR radiationDetects through films of oil dust water and iceResponds to flickering flames including those invisible to the naked eyeFalse alarms due to lighting or flickering sunlight are minimisedCompatible with Discovery and XP95 protocols

GBP 2854.80

1

Apollo Intelligent Triple IR Flame Detector 55000-020APO

Apollo Intelligent Triple IR Flame Detector 55000-020APOThe Intelligent Triple IR Flame Detector IR3 is designed to protect areas where open flaming fires may be expected. It is sensitive to low frequency flickering infra-red radiation emitted by flames during combustion.Key Features Loop-poweredSensitive to flickering IR radiationDetects through films of oil dust water and iceResponds to flickering flames including those invisible to the naked eyeFalse alarms due to lighting or flickering sunlight are minimisedCompatible with Discovery and XP95 protocols

GBP 2098.20

1

Crowcon S011987 Silane for TXgard-IS

Crowcon S011987 Silane for TXgard-ISSilane for the Crowcon TXgard-IS.

GBP 702.24

1

Fireclass 557.200.954FC FC1DS Fully Functional Repeater

Fireclass 557.200.954FC FC1DS Fully Functional RepeaterThe FC700 Fireclass range of repeaters include both AC and DC powered models with the option for single or multiple zonal displays. The FC700 FC1DS Fireclass fully functional Repeater is designed for applications where full functionality is required in a compact discrete and architecturally attractive package.FC700 FircClass panels and repeaters feature an advanced TFT colour touchscreen user interface that is ergonomically engineered specifically for fire alarm control. It is designed for operation with or without gloves and provides easy-to-use intuitive and flexible user controls including keyless log-on using RFID tags coded for different access levels.Up to seven FC700 touch screen repeaters can be connected to each FC700 control panel. Each repeater gives full user control and functionality interfacing with the control panel using an Ethernet connection. The FC700 Fireclass repeaters uses a direct network connection local network WiFi wireless or VPN with a maximum distance between the panel and the network point or repeater and network point of 100 m.Key Features8.4 TFT colour touch screen multilingual user interface - architecturally attractive and fully ProgrammableErgonomic Icon Display - Simple to operate user interface eliminates operator errorsTouch sensitive status LEDs provide event summaryInformation - Instant access to detailed event informationContext sensitive help and on screen operator instructions - reduces the need for user trainingUser configurable on screen site maps - No need for additional site plansProgrammable graphic quiescent display - Opportunity for customer brandingComprehensive point management and disable functions - Gives the user full control and reduces service and maintenance effortSelectively view or print from the extensive 10000 event log using dynamic filters Effective event diagnostics to quickly resolve site investigationsKeyless log-on using RFID tags - Identifies and logs user actionsFlush mount kit available

GBP 724.86

1

Notifier Honeywell Contact Interface Module CIM 583341.21

Notifier Honeywell Contact Interface Module CIM 583341.21The CIM is used as an interface of VARIODYN D1 system for the connection of 8 control contacts. The 8 control contacts can be configured as either an input or an output. Four of the eight contacts can be programmed in the input function with monitoring of connection line. A 3 m long Cat 5 cable is included to connect from CIM to the TWI input of DOM.Key FeaturesEN 54-16 certifiedContacts as inputs or outputs freely programmable 4 of which can be monitoredCAT5 cabling to DOMMounting by mounting to the DIN-track possibleConnection of different trades possible via CIM

GBP 850.14

1

Fireclass 557.200.955FC FC1D2 Display Only Repeater

Fireclass 557.200.955FC FC1D2 Display Only RepeaterThe FC700 Fireclass range of repeaters include both AC and DC powered models with the option for single or multiple zonal displays. The FC700 FC1D2 Display Only Repeater offers basic functionality and overview of the system status of the Fireclass fire detection system.FC700 Fireclass panels and repeaters feature an advanced TFT colour touchscreen user interface that is ergonomically engineered specifically for fire alarm control. It is designed for operation with or without gloves and provides easy-to-use intuitive and flexible user controls including keyless log-on using RFID tags coded for different access levels.Up to seven FC700 touch screen repeaters can be connected to each FC700 control panel. Each repeater gives full user control and functionality interfacing with the control panel using an Ethernet connection. The FC700 Fireclass repeaters uses a direct network connection local network WiFi wireless or VPN with a maximum distance between the panel and the network point or repeater and network point of 100 m.Key Features8.4 TFT colour touch screen multilingual user interface - architecturally attractive and fully ProgrammableErgonomic Icon Display - Simple to operate user interface eliminates operator errorsTouch sensitive status LEDs provide event summaryInformation - Instant access to detailed event informationContext sensitive help and on screen operator instructions - reduces the need for user trainingUser configurable on screen site maps - No need for additional site plansProgrammable graphic quiescent display - Opportunity for customer brandingComprehensive point management and disable functions - Gives the user full control and reduces service and maintenance effortSelectively view or print from the extensive 10000 event log using dynamic filters Effective event diagnostics to quickly resolve site investigationsKeyless log-on using RFID tags - Identifies and logs user actionsFlush mount kit available

GBP 672.68

1

Carrier Q9033A DT Mounting Arm for Q9033 for use with DT Series Flame Detectors

Carrier Q9033A DT Mounting Arm for Q9033 for use with DT Series Flame DetectorsThe Q9033A Mounting Arm is an approved accessory for installation of X-Series flame detectors. It allows easy pan and tilt adjustments for sighting of the detector.In a typical installation the detector is pointed down.When a detector is pointed down panning to either side of centre results in some degree of rotation the greater the pan amount the greater the rotation.Since the cone of vision of the X3301X3302 is not round but truncated on the upper half rotation results in an unbalanced field of view. The Collar Attachment enables the detector to be adjusted level to the horizon thereby ensuring a balanced field of view.Key FeaturesCompatible with all X-Series flame detectorsFM and DNV performance approved for use with X-Series detectorsAllows easy detector sightingHeavy duty Aluminium or Stainless-Steel constructionVibration and resonant frequency resistant

GBP 725.63

1

Carrier EST_FlyCase Demo Set For EST Compact

Carrier EST_FlyCase Demo Set For EST CompactThis demo set is only dedicated for demo purposes training presentation. It must not be used for projects. No certification covers this equipment for real purposes.This Demo equipment includes a full set of mounted devices into a single RackEST-VES-4002-LNRHandle_Flycase

GBP 5164.81

1

Brand

Merchant

Price (EUR)