ProfitSpring | B2B PPC Agency

Push Bar to Open 450mm x 150mm Photoluminescent

Push Bar to Open 450mm x 150mm PhotoluminescentPush bar signs are designed to identify the means of escape and should help individuals to escape quickly in the case of an emergency.Photo Luminescent - Same material as the rigid plastic but absorbs light to make it glow in the dark.

GBP 14.36

1

RGL Electronics EASY-RELAY 12 Volt Relay With A 0 to 15 Second Timer

RGL Electronics EASY-RELAY 12 Volt Relay With A 0 to 15 Second TimerThe EASY-RELAY is a 12 volt relay with a 0 to 15 second timer to be used to introduce a time delay between a Exit Button and the Lock release.The timer comes with Button Input and Lock output terminals and adjustable timer.Key FeaturesEasy Wiring for Access ControlTimer relay unit12v DCContact rating 10A 125VAC or 10A 30VDCNCCOMNOTimer 0-15 seconds

GBP 14.70

1

Morley M1A-R470SF-STCK-01 Surface-Mount Resettable Call Point with Flexi-Glass

Morley M1A-R470SF-STCK-01 Surface-Mount Resettable Call Point with Flexi-GlassThe M1A-R470SF-STCK-01 is a surface-mount resettable call point which comes complete with flexi-glass.Its simple modular design introduces plug-in terminations to the MCP series installation process. First fix installation permits all field wiring to be terminated to the plug whilst the fascia element and lid are kept out of harms way. To help the installer further a simple loop continuity device is included to aid checking of loop wiring before connection to the MCP and the fire alarm system. This new standard conventional break glass offers both clean and monitored contacts in the same housing.Key FeaturesImproved aestheticsAnti-tamper featuresFlexi-GlassIntegrated designSurface-mount

GBP 10.39

1

Morley M1A-R470FF-STCK-01 Flush-Mount Resettable Call Point with Flexi-Glass

Morley M1A-R470FF-STCK-01 Flush-Mount Resettable Call Point with Flexi-GlassThe M1A-R470FF-STCK-01 is a flush-mount resettable call point which comes complete with flexi-glass.Its simple modular design introduces plug-in terminations to the MCP series installation process. First fix installation permits all field wiring to be terminated to the plug whilst the fascia element and lid are kept out of harms way. To help the installer further a simple loop continuity device is included to aid checking of loop wiring before connection to the MCP and the fire alarm system. This new standard conventional break glass offers both clean and monitored contacts in the same housing.Key FeaturesImproved aestheticsAnti-tamper featuresFlexi-GlassIntegrated designFlush-mount

GBP 11.92

1

Morley M1A-R470SG-STCK-01 Surface Call Point with 470 Ohm Resistor and N.O. Contact

Morley M1A-R470SG-STCK-01 Surface Call Point with 470 Ohm Resistor and N.O. ContactA surface call point with 470 Ohm resistor and N.O. contact which comes complete with glass.Its simple modular design introduces plug-in terminations to the MCP series installation process. First fix installation permits all field wiring to be terminated to the plug whilst the fascia element and lid are kept out of harms way. To help the installer further a simple loop continuity device is included to aid checking of loop wiring before connection to the MCP and the fire alarm system. This new standard conventional break glass offers both clean and monitored contacts in the same housing.Key FeaturesPlug-in terminationsImproved aestheticsMonitored or clean contactsAnti-tamper featuresInterchangeable glass elementIntegrated designSurface call point

GBP 10.54

1

STI STI-12006 Personal Attack Alarm with Strobe

STI STI-12006 Personal Attack Alarm with StrobeMugger Stopper Plus helps stop mugger attacks or harassment two ways with an ear piercing 120 dB alarm or with an attention grabbing strobe light.This two-way action also makes it more effective in summoning aid in case of an injury or fall. In addition the built-in light can be used as a flashlight to help you find your keys or the keyhole on those dark moonless nights.To activate the Mugger Stopper Plus alarm and strobe light simply pull out the plug on top of the unit. To turn on the built-in flashlight slide the button on the side of the unit up.Please note The Mugger Stopper Plus alarm is extremely loud. Never place the unit close to your ears. To test alarm direct the unit away from you at arms length and pull out pin on top of unit.Key FeaturesPersonal protection alarm120 dB alarmFlashlight featureStrobe light may be used to draw attention or while jogging for safety9 volt battery operated not included

GBP 9.38

1

Kidde Airsense Stratos to 10mm Compression Adaptor

Kidde Airsense Stratos to 10mm Compression AdaptorThe compression adaptor is used to connect 10mm capillary tube on to 34 pipework. The compression adaptor fits into all standard 34 pipework fittings.Aspirating smoke detection system is the network of sampling pipes that actively transport air from a protected area to the detector. ABS Acrylonitrile Butadiene Styrene is a homogenous material with good chemical resistance and high impact strength. Other beneficial features are its suitability for use at low temperatures -40C and its ease of jointing.

GBP 9.67

1

Commander 702R Fire Assembly Point Sign RP

Commander 702R Fire Assembly Point Sign RPFire assembly point signs exist to clearly communicate a designated safe area. In times of emergency they help staff visitors and the general public to see quickly where they should gather in an evacuation. These signs are required compliance with current legislation.Key FeaturesThese signs are required compliance with current legislation.

GBP 10.84

1

C-Tec AXLR XLR to XLR Lead

C-Tec AXLR XLR to XLR LeadThe XLR to XLR lead is used to connect AMP mic to APXM outreach plate.

GBP 16.28

1

RGL Electronics VRM24-12 Voltage Reduction Module 24V to 12V

RGL Electronics VRM24-12 Voltage Reduction Module 24V to 12VA step-down DC-DC Convertor that takes an input at a higher voltage and converts it into a lower voltage. The input voltage is selected by moving the included jumper to the required voltage.Key FeaturesVoltage reducer module - 24VDC to 12VDCInput and output terminalsMax current 1AMP 12VDCSupplied with adhesive pad

GBP 16.16

1

Fireclass 2501012FC Conventional Indoor Call Point

Fireclass 2501012FC Conventional Indoor Call PointA comprehensive range of callpoints for use with FireClass conventional systems. All the callpoints are designed to enable an alarm signal to be given by breaking a glass element with the option of a resettable deformable element. If required an optional transparent hinged cover may be installed to guard against accidental operation.Key FeaturesDistinctive and recognisable stylingSurface or Flush MountingTest key facility speeds maintenance visitsOptional transparent hinged coverOptional Plastic Deformable Call Point Element for food processing areasIP67 Waterproof models for external application

GBP 11.27

1

SAS EML Epilepsy Monitor Lead

SAS EML Epilepsy Monitor LeadThe EML is an Epilepsy Monitor Lead designed for use with SAS systems.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 16.20

1

KAC M2A-R470SG-K013-01 Red Break Glass Call Point with LED - 470 Ohm Surface

KAC M2A-R470SG-K013-01 Red Break Glass Call Point with LED - 470 Ohm SurfaceInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.All MCP2 products are supplied with an LED indicator as standard.The MCP2A Product version is supplied with both an LEDresistor and normally open clean contact electrical options. These options are simply utilised by attaching the terminal block to the required connection in the back of the MCP product.Key FeaturesColour Red470OhmUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 14.22

1

Fireclass 2501013FC Conventional Manual Call Point with Glass Element with Back Box

Fireclass 2501013FC Conventional Manual Call Point with Glass Element with Back BoxThe 2501013FC is a conventional manual alarm call point with integral alarm LED and activation resistor. Operation is by break glass. This call point is semi flush mounted or can be surface mounted using back box and comes complete with a test key.Fireclass have a comprehensive range of callpoints for use with conventional systems. All the callpoints are designed to enable an alarm signal to be given by breaking a glass element with the option of a resettable deformable element. If required an optional transparent hinged cover may be installed to guard against accidental operation.Key FeaturesDistinctive and recognisable stylingSurface or Flush MountingTest key facility speeds maintenance visits

GBP 13.32

1

Cooper Fulleon 631203FUL-0137 110-230Vac to 24Vdc Supply Module for Combi Bases

Cooper Fulleon 631203FUL-0137 110-230Vac to 24Vdc Supply Module for Combi BasesThe powered deep base incorporates a small 24Vdc supply that allows any of the compatible Cooper Fulleon sounders and beacons to be operated from 110 or 230Vac supplies. This allows the installer much greater flexibility in the use of products and their applications.The Combi signalling units provide an extremely flexible system for the assembly of audible and visual signals that may be used in applications where different levels of warning or status need to be communicated.The foundation of the system is the Deep Base pre-assembled into linear units of 2 3 or 4 pieces. Into the assemblies the user can fit audible and visual warnings chosen from the standard ranges of Fulleon RoLP sounders Solex Xenon beacons and Solista Maxi LED beacons.The RoLP and RoLP Maxi allow the user to choose from 32 alarm tones and outputs in excess of 107dBA.The Solex Xenon beacons are available with three levels of light output and in five colours the Solista LED beacons again offer five colours and additionally three user selectable modes of operation steady single flash and double flash.LED beacons also are inherently robust and have extremely long operating lifetimes important where access for maintenance may be limited.Supply voltages from 9 to 60Vdc and 110 to 230Vac are available. Please see data sheets for the particular devices for full specification.Key FeaturesTwo three or four way assemblies to suit the status levels required.Two stage alarm sounders with 32 tones avoids conflicts with other alarm signalsFive colours available with both Xenon and LED light sources to suit most visual requirementsChoice of three light outputs for the Xenon beacons to suit the visibility levels requiredThree user selectable flash modes from the LED beacons allows clear differentiation between signals.Audible and visual elements can be locked into the Combi bases for added securityBases are available in either red or white to suit the applicationStandard voltage range 9 to 30Vdc. 60Vdc also available and will suit most commonly available DC suppliesAC mains operation from 110 to 230Vac with Combi Power module allows operation from AC supplies with the need for adjustment.

GBP 11.48

1

Fire Extinguisher Sign 200mm x 300mm Photoluminescent

Fire Extinguisher Sign 200mm x 300mm PhotoluminescentThe extinguisher sign is to help individuals locate fire extinguishers in buildings in the circumstances of a fire.Photo Luminescent - Same material as the rigid plastic but absorbs light to make it glow in the dark.

GBP 9.66

1

Upgrade to Pre 1030am Delivery England Scotland amp Wales

Upgrade to Pre 1030am Delivery England Scotland WalesPlease note the standard delivery charge still applies and the Pre 1030am delivery will be added as an additional cost.Before adding to your basket pleaseContact Uson 4401254 207532 to see if its available to your delivery address and that all items you wish to purchase are in stock.

GBP 10.80

1

C-Tec AL14 Male XLRM to 3.5mm Jack Lead

C-Tec AL14 Male XLRM to 3.5mm Jack LeadThe C-Tec AL14 - Male XLR to 3.5mm Jack Lead connects FPROSG Signal Generator to amplifiers in the PDA-PRO range.

GBP 12.11

1

Fire Point Sign 200mm x 300mm Photoluminescent

Fire Point Sign 200mm x 300mm PhotoluminescentThe fire point sign is to help individuals locate fire points in buildings in the circumstances of a fire.Photo Luminescent - Same material as the rigid plastic but absorbs light to make it glow in the dark.

GBP 9.66

1

Rutland TU1012.WHT Intumescent Fire Only Seal - White

Rutland TU1012.WHT Intumescent Fire Only Seal - WhiteThe TU1012.WHT is an intumescent fire only seal that expands when exposed to heat sealing the gap between the door and frame to help prevent the spread of fire.Key FeaturesDimensions 15 x 4mm x 1.05m

GBP 9.80

1

Elmdene LSC-SPC LSCLST - Pack of 10

Elmdene LSC-SPC LSCLST - Pack of 10The LSC-SPC Spacer is designed for use with EN3-LSC-BN-GN Contacts.Spacers help in aligning up the magnet to reed contact on doors that are off set or need a small amount of levelling up. The spacers can be used on both the magnet and or the door contact.Key FeaturesGrade 3

GBP 14.78

1

Rutland TU1016.WHT Intumescent Fire amp Smoke Seal - White

Rutland TU1016.WHT Intumescent Fire Smoke Seal - WhiteThe TU1016.WHT is an intumescent fire and smoke seal that expands when exposed to heat sealing the gap between the door and frame to help prevent the spread of fire and smoke.Key FeaturesDimensions 15 x 4mm x 1.05m

GBP 10.50

1

Rutland TU1017.BRN Intumescent Fire amp Smoke Seal - Brown

Rutland TU1017.BRN Intumescent Fire Smoke Seal - BrownThe TU1017.BRN is an intumescent fire and smoke seal that expands when exposed to heat sealing the gap between the door and frame to help prevent the spread of fire and smoke.Key FeaturesDimensions 15 x 4mm x 1.05m