ProfitSpring | B2B PPC Agency

STI STI-1130-IT Stopper II -Surface - Sounder - Italian

STI STI-1130-IT Stopper II -Surface - Sounder - ItalianLarger cover helps prevent malicious or accidental false fire alarms. The Stopper II is a unique device which has helped prevent false fire alarms around the world for more than 30 years without restricting legitimate operation of devices such as fire alarm break glass call points. It is ideal for schools colleges hospitals nursing homes hotels and all public buildings where there is a history or a threat of false fire alarms.The Stopper II consists of a clear tamperproof tough polycarbonate cover and frame that retrofits over the break glass call point. When lifted to gain access to the break glass its optional battery powered integral sounder emits a piercing 95 dB or 105 dB at 1 metre. Immediate attention is drawn to the area and the prankster will either run or be caught.

GBP 126.36

1

STI STI-3150-IT Weather Stopper II Surface - Italian Text

STI STI-3150-IT Weather Stopper II Surface - Italian TextLarge weatherproof cover designed to protect devices such as external call points. The Weather Stopper II is a tough clear polycarbonate cover designed to protect manual call points and other devices where protection from the environment is necessary such as car parks food processing factories and swimming pools. It is also ideal for saline atmospheres. It is available for flush or surface mounted devices with a variety of cable entry gaskets.The Weather Stopper II consists of a clear tamperproof tough polycarbonate cover frame and weather gasket that retrofits over the existing device. The weather gasket seals the unit preventing dust grime and water from getting to the device. In the event of an emergency simply lift the cover to gain access to the protected device.Key FeaturesProtective UV-stabilised polycarbonate coverDeters false alarmsWithout sounderSurface mount 50mm clear spacer with gasketULcUL Listed3 year guarantee against breakage in normal usePlease note Due to the curvature of this model the depth stated will varyVertical installation recommended137 mm H x 127 mm W x 131 mm DItalian text

GBP 100.75

1

STI STI-13610EG-IT Enviro Stopper EU Encl Plate

STI STI-13610EG-IT Enviro Stopper EU Encl PlateIP rated protective cover is ideal for extending the life and reliability of devices exposed to harsh environments such as wash down areas. The Enviro Stopper offers protection to manual call points and switches against dust and water ingress both outside and inside as well as preventing tampering vandalism and damage from accidental or malicious operation.Key FeaturesPrevents false fire alarms and protects devices located in areas where the environmental conditions are extremeDoes not hinder legitimate operation in the event of an emergencyTough UV-stabilised polycarbonate housingCan withstand the severest of knocksPrevents vandalism or accidental damage to the manual call pointDue to the curvature of these models the depth stated will varyIdeal for use in wet or wash down areas overall rating of IP56 IP66 for the back boxSuitable for indoor and outdoor applicationsCan accommodate a standard European call point or switchVertical installation recommended

GBP 106.40

1

STI STI-13120FR-IT Universal Stopper - Red Sounder - Clear Surface - Fire Label ITA

STI STI-13120FR-IT Universal Stopper - Red Sounder - Clear Surface - Fire Label ITAThese indoor and outdoor low profile or dome polycarbonate covers protect devices such as manual call points emergency buttons and dual action pull stations etc. without restricting legitimate operation. The versatile cover offers excellent protection against physical damage both accidental and intentional dust and grime as well as severe environments inside and out.When used on fire systems Universal Stopper is intended for areas where the incidence of false fire alarms from manual call points is high or has proven to be a serious problem. Any disadvantage of the device is more than balanced when one considers the consequences of false fire alarms especially if fire service personnel and equipment are responding to a false fire alarm when they are needed for a real fire somewhere else. Add to this the disruption to the facility when false alarms occur. If you have or may have a problem with false fire alarms or physicalweather damage to your fire alarm activation devices the Universal Stopper could prove invaluable.Key FeaturesThese indoor and outdoor low profile or dome polycarbonate covers can protect a variety of devices without restricting legitimate operationThree year guarantee against breakage of polycarbonate in normal use one year on electromechanical and electronic componentsPrevents false alarms without hindering legitimate operation of a manual call point in the event of an emergencyTough polycarbonate housing can withstand severest of knocksA simple 4 fixing installation can retrofit over existing devicePolycarbonate tested -40C -40F to 49C 120FPlease note The image is for illustrative purposes only. This Universal Stopper will feature a fire label - ITA.

GBP 98.78

1

Aritech VM651P Movable Mounting Kit

Aritech VM651P Movable Mounting KitThe VM651P movable mounting kit provides extra protection for the door. When mounted it prevents opening the door when the seismic detector is on the night position plate. Furthermore it can be wired to inhibit arming of the system when the detector is on the day position plate - thus making it impossible for the staff to forget to shut the door.

GBP 114.22

1

SAS RED2081 Single Alarm Infrared Unit

SAS RED2081 Single Alarm Infrared UnitThe original transmitters from SAS. The RED2081 alarm transmitter is battery operated and incorporates a red alarm button and a clothing clip with pull activation for emergency calls. It can be tested using our RED2501 test station.The RED2092 is a reset transmitter. It has a blue reset signal button and a clothing clip with pull activation for emergence calls.The RED208T is a test transmitter. It has a white button and is used by staff to periodically test the infra-red receivers. Activating the transmitter in the vicinity of a receiver causes its LED to flash proving that it is working correctly.

GBP 97.20

1

SAS RED2092 Single Reset Infrared Unit

SAS RED2092 Single Reset Infrared UnitThe original transmitters from SAS. The RED2081 alarm transmitter is battery operated and incorporates a red alarm button and a clothing clip with pull activation for emergency calls. It can be tested using our RED2501 test station.The RED2092 is a reset transmitter. It has a blue reset signal button and a clothing clip with pull activation for emergency calls.The RED208T is a test transmitter. It has a white button and is used by staff to periodically test the infra-red receivers. Activating the transmitter in the vicinity of a receiver causes its LED to flash proving that it is working correctly.

GBP 97.20

1

Scope FDANT Half Wave Folded Dipole Aerial for External Use

Scope FDANT Half Wave Folded Dipole Aerial for External UseThe FDANT is a well designed and constructed half wave folded dipole aerial with BALUN matching for use with all SCOPE UHF paging systems. It is capable of providing excellent coverage of very large sites provided it is sited and installed correctly.

GBP 168.48

1

Crowcon C01867 115V 5060 Hz In-Line Charger - No Plug

Crowcon C01867 115V 5060 Hz In-Line Charger - No PlugA 115V 5060 Hz In-Line Charger. It comes with no plug.

GBP 170.52

1

Klaxon Super M Motor Driven Siren 230v - SLD-0002 18-980049

Klaxon Super M Motor Driven Siren 230v - SLD-0002 18-980049The Super M is a powerful motor driven siren which emits a very high sound output. Designed for surface mounting it has a separate mounting bracket which may be secured in position first to allow for easy installation.In addition it comes pre-wired with 1 metre of cable. It has a weatherproof construction when wall mounted and is suitable for continuous use. The Super M is ideal for applications where a higher sound output is required such as in areas of high background noise.Key FeaturesHigh output siren sound 127dBSeparate mounting bracket for easy installationLong life and run timeWeatherproof for use both indoors and outdoors

GBP 151.82

1

Ziton ACA-CP-100 quotPquot Clip cw Silicon Sleeve - Pack of 100

Ziton ACA-CP-100 P Clip cw Silicon Sleeve - Pack of 100The ACA-CP series P clip is designed to secure LHD linear heat detection sensor cable. Every clip is supplied with a silicone pad. The pad protects the cable from mechanical damage and insulates it from the clip to protect it against heat transfer between the mounting surface and the sensor cable.InstallationRecommended spacing 1mKey FeaturesEasy installation of linear heat cableAvailable in aluminiumPack of 100

GBP 98.06

1

Nursecall Intercall AIRX7 Addressable IR Receiver

Nursecall Intercall AIRX7 Addressable IR ReceiverThe Guardian AIRX7 receiver is an addressable IR receiver for use on newer systems. It incorporates the latest HF technology to minimise the disruption caused to the signal transmission by high frequency lighting. It is designed to receive signals from the staff activation device in the event of an attack.Key FeaturesInstallation Flush or surface mount in standard single gang electrical back boxSize 80 x 80 x 20 mm

GBP 151.48

1

Klaxon Super M Motor Driven Siren 110v - SLD-0001 18-980047

Klaxon Super M Motor Driven Siren 110v - SLD-0001 18-980047The Super M is a powerful motor driven siren which emits a very high sound output. Designed for surface mounting it has a separate mounting bracket which may be secured in position first to allow for easy installation.In addition it comes pre-wired with 1 metre of cable. It has a weatherproof construction when wall mounted and is suitable for continuous use. The Super M is ideal for applications where a higher sound output is required such as in areas of high background noise.Key FeaturesHigh output siren sound 127 dBSeparate mounting bracket for easy installationMaximum operation 15mins every 2 hoursWeatherproof for use both indoors and outdoorsFrequency 1600 HzYellow ABS housing1 cable entry

GBP 167.34

1

Advanced ESLXBP Low Voltage Exit Sign Replacement NiCd Battery Packs - 5 Pieces

Advanced ESLXBP Low Voltage Exit Sign Replacement NiCd Battery Packs - 5 PiecesThe Advanced Low Voltage exit sign is a replacement NiCd battery packs it comes in 5 pieces.

GBP 161.20

1

Commander EPEX6-AC-W Contempo 6ltr Water Extinguisher Antique Copper

Commander EPEX6-AC-W Contempo 6ltr Water Extinguisher Antique CopperA fire extinguisher might be a mandatory piece of equipment but it neednt be a blight on the landscape. In fact it can actually enhance your interior design.This six-litre water fire extinguisher is ideal for premises at risk of Class A fires combustible materials. It has a 13A fire rating but its its striking copper looks that really get it noticed. And with matching brushed antique copper tubular stands and ID signs this range provides everything needed for truly elegant-looking fire defence.The Contempo range offers an industry first. These unique fire extinguishers combine fire safety with the most exquisite hand finish and are available in silver gold and copper colourways. Mandatory fire equipment can now complement the very finest interior design and even prove to be a feature. Perfect for modern bars and restaurants luxury hotels and contemporary offices opt for fire safety equipment youre proud to display.Key FeaturesFull range of spare parts5-year warrantyCorrosion-resistant finishPlastic base skirt for protectionPolyethylene internal lining

GBP 159.93

1

Cooper CASB393 Open Class Wall Sounder VAD With Isolator Red Body White Flash FXN559LPS MASB880

Cooper CASB393 Open Class Wall Sounder VAD With Isolator Red Body White Flash FXN559LPS MASB880The new intelligent addressable open class visual alarm device CASB393 combines the high output sound of the wall sounders with a brighter LED. It is compliant to EN54-23 3 and 17 making it suitable for use as a Fire notification device within Europe. The CASB393 offers low current consumption maximising the number of devices that can be fitted on a loop and provides a flexible solution due to it soft addressing multiple tone and body options. The open class VAD comes in two variants the standard CASB393 and the weatherproof CASB393WP which is IP66 rated meaning it is ideal for outdoor locations.With both variants the open class VAD is suitable for all markets where EN54-23 VADs are now a requirement.Key FeaturesIntegral short circuit isolatorLoop poweredSoft addressedQuick and simple to installSelectable tones controlled by the panelAdjustable volume controlled by the panelIP66 version available as both an internal and weather-proof variant availableEasy to maintainservice

GBP 114.18

1

Ziton FD-MB40 Four Reflector Adaptor

Ziton FD-MB40 Four Reflector AdaptorThe FD-MB40 is used in conjunction with the FD-MB20 to mount a four reflective prism at an off perpendicular axis. It allows for easy adjustment to ensure that the required angle between 0 and 45 can be achieved. It can be mounted vertically or horizontally.It is for use with FD-MB20 must be used when mounting 4 reflectors with the FD-MB20 mounting bracket.Key FeaturesEasy adjustable0 to 45 range

GBP 107.63

1

Advanced MxPro MXP-518-001F Access Enable key switch for 50105020 Fitted

Advanced MxPro MXP-518-001F Access Enable key switch for 50105020 FittedThe MXP-518-001F from Advanced is an Access Enable Key Switch designed for the Mx50105020 it is fitted.

GBP 98.59

1

Advanced MxPro MXP-518-002F Access Enable key switch for 5030 Fitted

Advanced MxPro MXP-518-002F Access Enable key switch for 5030 FittedTheMXP-518-002 is an Access Enable Key Switch designed for theMX-5030 Remote Control Terminal it is fitted.

GBP 98.59

1

Carrier P-9930 RS232 Comms Board for GST200 amp GST200-2

Carrier P-9930 RS232 Comms Board for GST200 GST200-2The P-9930 RS232 card is an optional card for GST200 series control panels providing two photoelectric isolation RS232 interfaces for connecting with GST Graphic Monitor Centre and GST Defining Tool.This card shouldnt be inserted and removed when it is energized.When entering calibration mode pressing SK1 key reset main board it will display Colour CRT OK if registration is successful.Key FeaturesStandard RS232 and USB interfacesConnecting GST Graphic Centre and GST Defining Tool

GBP 98.21

1

Wagner AD-05-0530 Extension Kit for IP52 Rating

Wagner AD-05-0530 Extension Kit for IP52 RatingThe AD-05-0530 is an Extension Kit for IP52 rating. It is designed for use with Wagners range of standard aspirating systems.

GBP 118.27

1

Commander PilferGard Anti-Tamper Alarm Siren AE04

Commander PilferGard Anti-Tamper Alarm SirenAE04The compact PilferGard alarm is an incredibly versatile and effective little alarm. With a very loud siren it can be used to alarmExtinguisher cabinetsFire extinguishersFire doors

GBP 98.66

1

Morley RTS151KEY Remote Test and Annunciator

Morley RTS151KEY Remote Test and AnnunciatorRemote test and annunciator accessory that enables the detector to be tested remotely providing test and reset functions it has a Red LED to indicate alarm conditions.

GBP 103.20

1

Aritech VVM351 Moveable Mounting Kit

Aritech VVM351 Moveable Mounting KitMovable mounting kit providing an extra protection for the door when mounted in such a way as to prevent the opening of the door when the detector is on the night position plate.Furthermore it can be wired to inhibit arming of the system when the detector is on the day position plate - thus making it impossible for the staff to forget to shut the door.Key FeaturesTo prevent opening of the door when the detector is on the night position plate

GBP 102.34

1

Global Fire Portable Programmer Unit - ZEOS-PROGRAMMER

Global Fire Portable Programmer Unit - ZEOS-PROGRAMMERThis equipment enables manual address assignment to all self-programmable devices. It should be used during maintenance and installation as an alternative to GFEs addressable panels ASET mode. Additionally it also allows installer to read address of the device and read its analogue value. A larger battery life is obtained with use of lithium batteries which can be recharged through available USB port.LED StatusGreen Programmer is working correctlyGreen Flashing Battery is chargingYellow Selected function in progressRed Internal faultRed Flashing Low battery

GBP 123.41

1

Brand

Merchant

Price (EUR)