206 results (0,13452 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Gent S4T-720 S4 SELF TEST Heat Sensor

Gent S4T-720 S4 SELF TEST Heat Sensor

Gent S4T-720 S4 SELF TEST Heat SensorThe GENT S4T-720 Self-Test Heat Sensor has a new IP21 external moulding new detector chamber design and a dual microprocessor PCB. This design delivers even better smoke detection and voice storage capacity. In addition the award-winning Self-Test feature allows both the heat and optical sensors within the device to be tested using the CLSS app.The Self-Test patented design performs real sensor tests by heating the heat sensing thermistor and generating real aerosol smoke to test the optical sensor. The small fan within the device gently blows the aerosol from the detection chamber through the detectors smoke entry points into the room. This method simulates a more realistic fire test than many traditional testing methods ensuring that the smoke entry points are not blocked and able to detect a real fire.Each device also incorporates Bluetooth Low Energy BLE. When activated BLE acts like a beacon in each detector that can be automatically detected by a mobile device using the CLSS app. This has many helpful features such as finding a device automatically ensuring the device details are correct and proving that an engineer has been within the visual inspection range.Key Features Enables discrete functional testing and visual inspection of the fire alarm system by reducing the engineer toolset to just a mobile device phone or tablet. No more impact on building occupiers Tests both the heat and smoke sensors by heating the thermistor and introducing small amounts of smoke into the detection chamber Gently blows the smoke out of the detection chamber and smoke entry points to ensure they are not blocked Flexible testing options allow the engineer to test in different ways single device detection zone loops panels Allows up to 6 devices to be tested at once per loop and any number of loops can be tested simultaneously making the functional testing incredibly fast Device testing is fast enough to allow up to 4 functional tests to be performed per year for the lifespan of the device Eliminates all access issues when detector testing ensuring 100 functional testing is achieved Allows the system to remain active whilst testing as each detector is only offline for 60 seconds and outputs are not generated Any fires detected outside of the devices performing Self-Test will stop the Self-Test process and operate the fire systems Cause Effect Allows the engineer to easily locate the detector using the App and BLE to check the device number label zone description and detector type Allows simple device updates to be performed through the App including the correction of inaccurate device labels and loop mapping The app and BLE handshake verifies that the engineer has been within visual inspection range Optional Inspection prompt LEDs on the device let the engineer know what Self-Test devices need to be visually inspected and will automatically turn off when the visual inspection is complete Engineers can spend more time digitally capturing non-compliance issues and advising how to resolve them. This includes any issues causing false alarms Test Fire LED option in the App allows the fire LED to be tested a pending BS5839-1 testing requirement. This feature can additionally confirm that they are inspecting the correct device The CLSS App allows the engineer to simulate a fire and test the Cause Effect logic The CLSS App also allows the Cause Effect to be triggered through a successful Self-Test operation allowing a witness test to be performed using real smoke

GBP 100.21
1

Gent S4T-710 S4 SELF TEST Optical Heat Sensor

Gent S4T-710 S4 SELF TEST Optical Heat Sensor

Gent S4T-710 S4 SELF TEST Optical Heat SensorThe GENT S4T-710 Self-Test Optical Heat Multisensor has a new IP21 external moulding new detector chamber design and a dual microprocessor PCB. This design delivers even better smoke detection and voice storage capacity. In addition the award-winning Self-Test feature allows both the heat and optical sensors within the device to be tested using the CLSS app.The Self-Test patented design performs real sensor tests by heating the heat sensing thermistor and generating real aerosol smoke to test the optical sensor. The small fan within the device gently blows the aerosol from the detection chamber through the detectors smoke entry points into the room. This method simulates a more realistic fire test than many traditional testing methods ensuring that the smoke entry points are not blocked and able to detect a real fire.Each device also incorporates Bluetooth Low Energy BLE. When activated BLE acts like a beacon in each detector that can be automatically detected by a mobile device using the CLSS app. This has many helpful features such as finding a device automatically ensuring the device details are correct and proving that an engineer has been within the visual inspection range.Key Features Tests both the heat and smoke sensors by heating the thermistor and introducing small amounts of smoke into the detection chamber Gently blows the smoke out of the detection chamber and smoke entry points to ensure they are not blocked Flexible testing options allow the engineer to test in different ways single device detection zone loops panels Allows up to 6 devices to be tested at once per loop and any number of loops can be tested simultaneously making the functional testing incredibly fast Device testing is fast enough to allow up to 4 functional tests to be performed per year for the lifespan of the device Eliminates all access issues when detector testing ensuring 100 functional testing is achieved Allows the system to remain active whilst testing as each detector is only offline for 60 seconds and outputs are not generated Any fires detected outside of the devices performing Self-Test will stop the Self-Test process and operate the fire systems Cause Effect Allows the engineer to easily locate the detector using the App and BLE to check the device number label zone description and detector type Allows simple device updates to be performed through the App including the correction of inaccurate device labels and loop mapping The app and BLE handshake verifies that the engineer has been within visual inspection range Optional Inspection prompt LEDs on the device let the engineer know what Self-Test devices need to be visually inspected and will automatically turn off when the visual inspection is complete Engineers can spend more time digitally capturing non-compliance issues and advising how to resolve them. This includes any issues causing false alarms Test Fire LED option in the App allows the fire LED to be tested a pending BS5839-1 testing requirement. This feature can additionally confirm that they are inspecting the correct device The CLSS App allows the engineer to simulate a fire and test the Cause Effect logic The CLSS App also allows the Cause Effect to be triggered through a successful Self-Test operation allowing a witness test to be performed using real smoke

GBP 105.31
1

Gent S4T-711 S4 SELF TEST Dual Optical Heat Sensor

Gent S4T-711 S4 SELF TEST Dual Optical Heat Sensor

Gent S4T-711 S4 SELF TEST Dual Optical Heat SensorThe S4T-711 Self-Test Dual Optical Heat Multisensor has a new IP21 external moulding new detector chamber design and a dual microprocessor PCB. This design delivers even better smoke detection and voice storage capacity. In addition the award-winning Self-Test feature allows both the heat and optical sensors within the device to be tested using the CLSS app.The Self-Test patented design performs real sensor tests by heating the heat sensing thermistor and generating real aerosol smoke to test the optical sensor. The small fan within the device gently blows the aerosol from the detection chamber through the detectors smoke entry points into the room. This method simulates a more realistic fire test than many traditional testing methods ensuring that the smoke entry points are not blocked and able to detect a real fire.Each device also incorporates Bluetooth Low Energy BLE. When activated BLE acts like a beacon in each detector that can be automatically detected by a mobile device using the CLSS app. This has many helpful features such as finding a device automatically ensuring the device details are correct and proving that an engineer has been within the visual inspection range.Key Features Enables discrete functional testing and visual inspection of the fire alarm system by reducing the engineer toolset to just a mobile device phone or tablet. No more impact on building occupiers Tests both the heat and smoke sensors by heating the thermistor and introducing small amounts of smoke into the detection chamber Gently blows the smoke out of the detection chamber and smoke entry points to ensure they are not blocked Flexible testing options allow the engineer to test in different ways single device detection zone loops panels Allows up to 6 devices to be tested at once per loop and any number of loops can be tested simultaneously making the functional testing incredibly fast Device testing is fast enough to allow up to 4 functional tests to be performed per year for the lifespan of the device Eliminates all access issues when detector testing ensuring 100 functional testing is achieved Allows the system to remain active whilst testing as each detector is only offline for 60 seconds and outputs are not generated Any fires detected outside of the devices performing Self-Test will stop the Self-Test process and operate the fire systems Cause Effect Allows the engineer to easily locate the detector using the App and BLE to check the device number label zone description and detector type Allows simple device updates to be performed through the App including the correction of inaccurate device labels and loop mapping The app and BLE handshake verifies that the engineer has been within visual inspection range Optional Inspection prompt LEDs on the device let the engineer know what Self-Test devices need to be visually inspected and will automatically turn off when the visual inspection is complete Engineers can spend more time digitally capturing non-compliance issues and advising how to resolve them. This includes any issues causing false alarms Test Fire LED option in the App allows the fire LED to be tested a pending BS5839-1 testing requirement. This feature can additionally confirm that they are inspecting the correct device The CLSS App allows the engineer to simulate a fire and test the Cause Effect logic The CLSS App also allows the Cause Effect to be triggered through a successful Self-Test operation allowing a witness test to be performed using real smoke

GBP 121.45
1

Gent S4T-780-S S4 SELF TEST Heat Sensor and Sounder

Gent S4T-780-S S4 SELF TEST Heat Sensor and Sounder

Gent S4T-780-S S4 SELF TEST Heat Sensor and SounderThe GENT S4T-780-S Self-Test Heat Sensor with Integrated Sounder has a new IP21 external moulding new detector chamber design and a dual microprocessor PCB. This design delivers even better smoke detection and voice storage capacity. In addition the award-winning Self-Test feature allows both the heat and optical sensors within the device to be tested using the CLSS app.The Self-Test patented design performs real sensor tests by heating the heat sensing thermistor and generating real aerosol smoke to test the optical sensor. The small fan within the device gently blows the aerosol from the detection chamber through the detectors smoke entry points into the room. This method simulates a more realistic fire test than many traditional testing methods ensuring that the smoke entry points are not blocked and able to detect a real fire.Each device also incorporates Bluetooth Low Energy BLE. When activated BLE acts like a beacon in each detector that can be automatically detected by a mobile device using the CLSS app. This has many helpful features such as finding a device automatically ensuring the device details are correct and proving that an engineer has been within the visual inspection range.Key Features Enables discrete functional testing and visual inspection of the fire alarm system by reducing the engineer toolset to just a mobile device phone or tablet. No more impact on building occupiers Tests both the heat and smoke sensors by heating the thermistor and introducing small amounts of smoke into the detection chamber Gently blows the smoke out of the detection chamber and smoke entry points to ensure they are not blocked Flexible testing options allow the engineer to test in different ways single device detection zone loops panels Allows up to 6 devices to be tested at once per loop and any number of loops can be tested simultaneously making the functional testing incredibly fast Device testing is fast enough to allow up to 4 functional tests to be performed per year for the lifespan of the device Eliminates all access issues when detector testing ensuring 100 functional testing is achieved Allows the system to remain active whilst testing as each detector is only offline for 60 seconds and outputs are not generated Any fires detected outside of the devices performing Self-Test will stop the Self-Test process and operate the fire systems Cause Effect Allows the engineer to easily locate the detector using the App and BLE to check the device number label zone description and detector type Allows simple device updates to be performed through the App including the correction of inaccurate device labels and loop mapping The app and BLE handshake verifies that the engineer has been within visual inspection range Optional Inspection prompt LEDs on the device let the engineer know what Self-Test devices need to be visually inspected and will automatically turn off when the visual inspection is complete Engineers can spend more time digitally capturing non-compliance issues and advising how to resolve them. This includes any issues causing false alarms Test Fire LED option in the App allows the fire LED to be tested a pending BS5839-1 testing requirement. This feature can additionally confirm that they are inspecting the correct device The CLSS App allows the engineer to simulate a fire and test the Cause Effect logic The CLSS App also allows the Cause Effect to be triggered through a successful Self-Test operation allowing a witness test to be performed using real smoke

GBP 141.83
1

X-ER LED 3 Hour Maintained Self-Test Round Weatherproof Luminaire

X-ER LED 3 Hour Maintained Self-Test Round Weatherproof Luminaire

X-ER LED 3 Hour Maintained Self-Test Round Weatherproof LuminaireThe X-ER is a quality luminaire for areas of general amenity lighting. This luminaire offers a cost-effective emergency lighting and mains lighting combination and is ideal for areas where higher light levels are required.Key FeaturesHigh lumen outputLow power consumption4000k Colour temperatureIP65DALI and Self-Test optionsCentral Battery and Static inverter systemsBlack base finish option

GBP 150.80
1

Gent S4T-770-S S4 SELF TEST Optical Heat Sensor amp Sounder

Gent S4T-770-S S4 SELF TEST Optical Heat Sensor amp Sounder

Gent S4T-770-S S4 SELF TEST Optical Heat Sensor SounderThe GENT S4T-770-S Self-Test Optical Heat Multisensor with Integrated Sounder has a new IP21 external moulding new detector chamber design and a dual microprocessor PCB. This design delivers even better smoke detection and voice storage capacity. In addition the award-winning Self-Test feature allows both the heat and optical sensors within the device to be tested using the CLSS app.The Self-Test patented design performs real sensor tests by heating the heat sensing thermistor and generating real aerosol smoke to test the optical sensor. The small fan within the device gently blows the aerosol from the detection chamber through the detectors smoke entry points into the room. This method simulates a more realistic fire test than many traditional testing methods ensuring that the smoke entry points are not blocked and able to detect a real fire.Each device also incorporates Bluetooth Low Energy BLE. When activated BLE acts like a beacon in each detector that can be automatically detected by a mobile device using the CLSS app. This has many helpful features such as finding a device automatically ensuring the device details are correct and proving that an engineer has been within the visual inspection range.Key Features Enables discrete functional testing and visual inspection of the fire alarm system by reducing the engineer toolset to just a mobile device phone or tablet. No more impact on building occupiers Tests both the heat and smoke sensors by heating the thermistor and introducing small amounts of smoke into the detection chamber Gently blows the smoke out of the detection chamber and smoke entry points to ensure they are not blocked Flexible testing options allow the engineer to test in different ways single device detection zone loops panels Allows up to 6 devices to be tested at once per loop and any number of loops can be tested simultaneously making the functional testing incredibly fast Device testing is fast enough to allow up to 4 functional tests to be performed per year for the lifespan of the device Eliminates all access issues when detector testing ensuring 100 functional testing is achieved Allows the system to remain active whilst testing as each detector is only offline for 60 seconds and outputs are not generated Any fires detected outside of the devices performing Self-Test will stop the Self-Test process and operate the fire systems Cause Effect Allows the engineer to easily locate the detector using the App and BLE to check the device number label zone description and detector type Allows simple device updates to be performed through the App including the correction of inaccurate device labels and loop mapping The app and BLE handshake verifies that the engineer has been within visual inspection range Optional Inspection prompt LEDs on the device let the engineer know what Self-Test devices need to be visually inspected and will automatically turn off when the visual inspection is complete Engineers can spend more time digitally capturing non-compliance issues and advising how to resolve them. This includes any issues causing false alarms Test Fire LED option in the App allows the fire LED to be tested a pending BS5839-1 testing requirement. This feature can additionally confirm that they are inspecting the correct device The CLSS App allows the engineer to simulate a fire and test the Cause Effect logic The CLSS App also allows the Cause Effect to be triggered through a successful Self-Test operation allowing a witness test to be performed using real smoke

GBP 134.18
1

Gent S4T-771-S S4 SELF TEST Dual Optical Heat Sensor amp Sounder

Gent S4T-771-S S4 SELF TEST Dual Optical Heat Sensor amp Sounder

Gent S4T-771-S S4 SELF TEST Dual Optical Heat Sensor SounderThe GENT S4T-771-S Self-Test Dual Optical Heat Multisensor with Integrated Sounder has a new IP21 external moulding new detector chamber design and a dual microprocessor PCB. This design delivers even better smoke detection and voice storage capacity. In addition the award-winning Self-Test feature allows both the heat and optical sensors within the device to be tested using the CLSS app.The Self-Test patented design performs real sensor tests by heating the heat sensing thermistor and generating real aerosol smoke to test the optical sensor. The small fan within the device gently blows the aerosol from the detection chamber through the detectors smoke entry points into the room. This method simulates a more realistic fire test than many traditional testing methods ensuring that the smoke entry points are not blocked and able to detect a real fire.Each device also incorporates Bluetooth Low Energy BLE. When activated BLE acts like a beacon in each detector that can be automatically detected by a mobile device using the CLSS app. This has many helpful features such as finding a device automatically ensuring the device details are correct and proving that an engineer has been within the visual inspection range.Key Features Enables discrete functional testing and visual inspection of the fire alarm system by reducing the engineer toolset to just a mobile device phone or tablet. No more impact on building occupiers Tests both the heat and smoke sensors by heating the thermistor and introducing small amounts of smoke into the detection chamber Gently blows the smoke out of the detection chamber and smoke entry points to ensure they are not blocked Flexible testing options allow the engineer to test in different ways single device detection zone loops panels Allows up to 6 devices to be tested at once per loop and any number of loops can be tested simultaneously making the functional testing incredibly fast Device testing is fast enough to allow up to 4 functional tests to be performed per year for the lifespan of the device Eliminates all access issues when detector testing ensuring 100 functional testing is achieved Allows the system to remain active whilst testing as each detector is only offline for 60 seconds and outputs are not generated Any fires detected outside of the devices performing Self-Test will stop the Self-Test process and operate the fire systems Cause Effect Allows the engineer to easily locate the detector using the App and BLE to check the device number label zone description and detector type Allows simple device updates to be performed through the App including the correction of inaccurate device labels and loop mapping The app and BLE handshake verifies that the engineer has been within visual inspection range Optional Inspection prompt LEDs on the device let the engineer know what Self-Test devices need to be visually inspected and will automatically turn off when the visual inspection is complete Engineers can spend more time digitally capturing non-compliance issues and advising how to resolve them. This includes any issues causing false alarms Test Fire LED option in the App allows the fire LED to be tested a pending BS5839-1 testing requirement. This feature can additionally confirm that they are inspecting the correct device The CLSS App allows the engineer to simulate a fire and test the Cause Effect logic The CLSS App also allows the Cause Effect to be triggered through a successful Self-Test operation allowing a witness test to be performed using real smoke

GBP 156.26
1

X-ES LED 3 Hour Maintained Self Test Exit Box

X-ES LED 3 Hour Maintained Self Test Exit Box

X-ES LED 3 Hour Maintained Self Test Exit BoxThe X-ES Light is a general purpose LED wall mounted emergency escape route sign.Comprising a white stove-enamelled zintec-coated sheet steel base and fitted with a self-extinguishing legend panel the X-ES Light is designed for use on escape routes. It conforms to the 850C hot-wire test as defined by ICEL.The X-ES Light has cable knockouts which are provided in the sides and the top.Key FeaturesIP20 Interior UseEscape Route SignHigh Output LED Light SourceChoice of LegendColour Options and Brass or Chrome VersionsSelf-Contained34m Viewing Distance

GBP 111.49
1

Testifire TESTIFIRE25-001 Spare Remote

Testifire TESTIFIRE25-001 Spare Remote

Testifire TESTIFIRE25-001 Spare RemoteGeneration of test stimuli starts when Testifire is positioned over a detector and the infrared beam within the transparent cup is interrupted. Certain detectors such as those with virtual chambers have no physical features to cause stimuli generation to start. The Optional Testifire 25 Infrared Remote Control can be used to initiate the test procedure in such situations.The Remote control is operated by aiming the LED towards Testifire when it is at height and the control button is used to startstop a test andor move on to the next test in the sequence.

GBP 139.67
1

SAS RED2081 Single Alarm Infrared Unit

SAS RED2081 Single Alarm Infrared Unit

SAS RED2081 Single Alarm Infrared UnitThe original transmitters from SAS. The RED2081 alarm transmitter is battery operated and incorporates a red alarm button and a clothing clip with pull activation for emergency calls. It can be tested using our RED2501 test station.The RED2092 is a reset transmitter. It has a blue reset signal button and a clothing clip with pull activation for emergence calls.The RED208T is a test transmitter. It has a white button and is used by staff to periodically test the infra-red receivers. Activating the transmitter in the vicinity of a receiver causes its LED to flash proving that it is working correctly.

GBP 97.20
1

SAS RED2092 Single Reset Infrared Unit

SAS RED2092 Single Reset Infrared Unit

SAS RED2092 Single Reset Infrared UnitThe original transmitters from SAS. The RED2081 alarm transmitter is battery operated and incorporates a red alarm button and a clothing clip with pull activation for emergency calls. It can be tested using our RED2501 test station.The RED2092 is a reset transmitter. It has a blue reset signal button and a clothing clip with pull activation for emergency calls.The RED208T is a test transmitter. It has a white button and is used by staff to periodically test the infra-red receivers. Activating the transmitter in the vicinity of a receiver causes its LED to flash proving that it is working correctly.

GBP 97.20
1

Testifire XTR2 TESTIFIRE-ADAP-001 Adaptor for ASD and Flat Detectors

Testifire XTR2 TESTIFIRE-ADAP-001 Adaptor for ASD and Flat Detectors

Testifire XTR2 TESTIFIRE-ADAP-001 Adaptor for ASD and Flat DetectorsTestifire XTR2 is the next generation of our popular Testifire product however it is much more than just a functional test tool. Testifire XTR2 has compliance at its core its unique features enable compliant testing to be carried out and via an App and supporting cloud-portal ensure test results can be recorded automatically at the time of test giving fire service managers and building owners the ultimate proof of test.Whats in the reportThe test report is automatically generated on-site once the final detector has been tested. Its then immediately available for viewing by the relevant team members at the service company and then be sent to the client along with any other relevant documentation. The report combines all the data needed to prove testing has taken place and confirms the status of each detector automatically highlighting any areas of concern at the top of the document.Key FeaturesASDFlat detector adaptor for use with Testifire XTR2

GBP 135.48
1

Kidde KE-DM3010RS27-IP Intelligent Addressable Manual Call Point - Weatherproof - English - Red

Kidde KE-DM3010RS27-IP Intelligent Addressable Manual Call Point - Weatherproof - English - Red

Kidde KE-DM3010RS27-IP Intelligent Addressable Manual Call Point - Weatherproof - English - RedThe KE-DM3000 Series is an intelligent range of addressable Excellence Series manual call points. The KE-DM3010RS27-IP is a weatherproof red single action MCP with a House-on-Fire and FIRE functional indication. It is delivered complete with resettable element test connector and test key. Multiple optional accessories are available to facilitate most in- and outdoor installation requirements.AestheticsThis weatherproof single action MCP is a standard profile MCP suitable for surface mount installations. It is supplied with a colour matched weatherproof back box. With its designer dual tricolour LEDs it offers 180 clear local indication of its operational status even from a side view. The clean face of the MCP is further enhanced by a front access test key facility.Installation maintenance friendlyThe front facing access for an aesthetically matching test key allows unhindered access regardless of the installation location. The MCP key doubles as a test and disassembly tool allowing removal of the MCP front cover without the need for additional tools.CompatibilityThe KE-DM3000 range may be used on all Kidde Excellence Series fire systems and are also compatible with legacy Aritech fire systems. They can in many cases be deployed into existing systems without CIE configuration changes.

GBP 154.30
1

Ziton ZP888R ZP7 Series Intelligent Addressable Manual Call Point Weatherproof

Ziton ZP888R ZP7 Series Intelligent Addressable Manual Call Point Weatherproof

Ziton ZP888R ZP7 Series Intelligent Addressable Manual Call Point WeatherproofThe ZP880 Series is an intelligent range of addressable manual call points. The ZP888R is a red single action weatherproof MCP. It is delivered complete with resettable element test connector and test key. Multiple optional accessories are available to facilitate most outdoor installation requirements.This weatherproof single action MCP is a standard profile outdoor MCP suitable for surface mount installations using the back box supplied with the product. With its designer dual tricolour LEDs it offers 180 clear local indication of its operational status even from a side view. The clean face of the MCP is further enhanced by a front access test key facility that allows access to the activation element that can be either frangible or resettable.Key FeaturesReliable single action manual call point for surface mountingA dual tri-colour status indicator offers 180 alarm visibilityTamper resistant design with resettable or frangible elementUnobtrusive front facing test facilityOutdoor rated waterproof enclosureBack box with top and bottom cable entryScreen connection terminal for electrically noisy installationsPluggable connector with link through facility for ease of installation and pre-commissioning testingAlarm flag on the face of the MCP allows maintenance indication even without alarm indicatorsFast no-tools-required maintenance using the test keyUp to 127 devices per loop

GBP 167.68
1

Kidde KE-DM3110R-IP Excellence Series Intelligent Addressable Manual Call Point With Isolator - Waterproof

Kidde KE-DM3110R-IP Excellence Series Intelligent Addressable Manual Call Point With Isolator - Waterproof

Kidde KE-DM3110R-IP Excellence Series Intelligent Addressable Manual Call Point With Isolator - WaterproofThe KE-DM3100 Series is an intelligent range of addressable Excellence Series manual call points with integrated isolation. The KE-DM3110R-IP is a red single action outdoor MCP with a House-on-Fire functional indicator. It is delivered complete with resettable element test connector and test key. Multiple optional accessories are available to facilitate most indoor installation requirements.AestheticsThis single action MCP is a standard profile indoor MCP suitable for surface and recess mount installations using standard or legacy European electrical boxes. With its designer dual tricolour LEDs it offers 180 clear local indication of its operational status even from a side view in a passage installation. The clean face of the MCP is further enhanced by a front access test key facility that allows access to the back box and cabling making additional fasting screw holes obsolete.Installation Maintenance FriendlyThe front facing access for an aesthetically matching test key allows unhindered access regardless of the installation location. The MCP key doubles as a test and disassembly tool allowing removal of the MCP front cover without the need for additional tools.CompatibilityThe KE-DM3000 range may be used on all Kidde Excellence Series fire systems and are also compatible with legacy Aritech fire systems. They can in many cases be deployed into existing systems without CIE configuration changes.Key FeaturesReliable single action manual call point for recess or surface mountingIntegrated short circuit isolation for added safetyDual tri-colour status indicators offers 180 alarm visibilityTamper resistant design with resettable or frangible elementUnobtrusive front facing test facilityStandard mounting options facilitates easy retrofitting to existing installationsBack box with rear top and bottom cable entryScreen connection terminal in the back box for electrically noisy installationsPluggable connector with link through facility for ease of installation and pre-commissioning testingAn alarm flag on the face of the manual call point allows alarm indication even without alarm LEDsFast no-tools-required maintenance using the test keyUp to 128 devices supported per loopWaterproof

GBP 163.76
1

X-CS3M LED Maintained DALI Bulkhead IP65

X-CS3M LED Maintained DALI Bulkhead IP65

X-CS3M LED Maintained DALI Bulkhead IP65 The X-CSL3M light is a high light output emergency bulkhead with the added benefit of utilising LEDs and a self-test facility. This LED bulkhead is a self-test emergency luminaire suitable for internal and external environments. It uses 6 high output LEDs with a moulded self-extinguishing polycarbonate base and fitted with a fresnel diffuser suitable for use on escape routes 850 degrees C Hot-wire test defined by ICEL.The diffuser is screw fixed and sealed by gasket to the base to provide IP65 protection. The gear tray is hinged and fully removable and cable entries are provided in the ends and base. This bulkhead can be fitted with a universal legend kit part no. ULK making it suitable for use as exit signs.Key FeaturesIP65PolycarbonateABS ConstructionClear Fresnel DiffuserRemovable Hinged Gear TrayExit SignsSelf-Test6 LEDsInternal External

GBP 141.62
1