2.208 results (0,15248 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

PROBE TEST Heat Probe Testing Tool 120W

PROBE TEST Heat Probe Testing Tool 120W

PROBE TEST Heat Probe Testing ToolProbe-Test is an alternative to a gas torch or heat gun for testing Probe type Point Heat Detectors. Its advantages are particularly relevant when working in conditions where naked flame or exposed heating elements is unsafe or inconvenient. For example in roof spaces under floor spaces close to special wall or ceiling finishes. The heads reach a working maximum temperature of 520 Degrees Celsius.Key FeaturesHigh Power 120WNo Naked FlamesTests in SecondsTemperature ControlledFull Instructions IncludedThe heads reach a working maximum temperature of 520 Degrees Celsius.Available in 120v although lead times may be longer. Please Contact Us for more information.InstructionsThese instructions should be carefully followed each time the Probe-Test is used. Instructions using standard Point Type Heat Probes e.g. Fenwal Tyco Olsen T54B etc.Select appropriate heads for the diameter of detector probe shaft e.g. .Slide the heads onto the shaft until they bottom out. It is important that the heads do not slide easily off the shaft.Place Probe-Tester in a safe location. Switch ON at mains the indicator will glow Amber. Allow approximately 4 minutes to attain full working temperature.Position the two heated heads on the Probe-Test over the Heat Probe to be tested approximately 20mm from the end of the probe. Grip the handles firmly ensuring the heads remains at 90 degrees to the probe. Hold until the Heat Probe Detector actives.Remove Probe-Test from the Detector unplug from the mains and allow the Probe-Tester to cool.

GBP 210.00
1

X-HR LED 3 Hour Maintained Self Testing Weatherproof Diecast Luminaire

X-HR LED 3 Hour Maintained Self Testing Weatherproof Diecast Luminaire

X-HR LED 3 Hour Maintained Self Testing Weatherproof Diecast LuminaireThe X-HR Light is anarchitectural luminaire suitable for prestigious exterior applications. Manufactured from a die cast aluminium base and grill with an injection moulded polycarbonate opal diffuser. The diffuser is held in place by captive screws with a silicone rubber gasket to provide the seal. The X-HR Light offers an effective solution to combine emergency lighting and mains lighting.Key FeaturesHigh lumen outputOpal polycarbonate diffuser4000k Colour temperatureIP65

GBP 202.36
1

X-SR LED 3 Hour Maintained Self Testing Anti-Ligature Luminaire

X-SR LED 3 Hour Maintained Self Testing Anti-Ligature Luminaire

X-SR LED 3 Hour Maintained Self Testing Anti-Ligature LuminaireThe X-SR Light is a circular anti ligature vandal resistant luminaire suitable for interior environments.Comprising of spun aluminium housing with a polycarbonate opal diffuser suitable for use on escape routes 850 C Hot-Wire test defined by ICEL. The diffuser is held in place by a security screw fixed rim which fits flush to the ceiling. The X-SR Light offers aneffective solution for harsh environmentswhere both mains and emergency lighting is required.Key FeaturesAnti-ligatureHigh lumen outputLow power consumption4000k Colour temperatureIP40DALI and Self-Test optionsCentral Battery and Static inverter systemsPowder coated aluminium spinning

GBP 262.76
1

Ringtail X-MPDB3MWSST LED Maintained Self-Testing White Suspended Blade Sign

Ringtail X-MPDB3MWSST LED Maintained Self-Testing White Suspended Blade Sign

Ringtail X-MPDB3MWSST LED Maintained Self-Testing WhiteSuspended Blade SignThis decorative X-MPDB exit sign uses high illuminationwhite LEDs in a small compact shell utilising the best of LED technology.Providing the user with an excellent energy efficient luminaire boasting anequally impressive life span.From this new technology we have been able to reduce thesize of the overall unit to provide you with a compact internal use IP20rated emergency exit sign. It can be ordered with a range of specifics suitinga range of customer needs and for ease of installation. This is an attractivealternative to a standard exit sign available in standard maintainedself-test and DALI addressable options providing uncompromising flexibility toits user.Key FeaturesEscape route signCeiling mountHigh output LED light sourceIP20DALI and SELF TESTSelf-containedPlease note this image is for illustrative purposes only

GBP 217.51
1

X-MP LED 3 Hour Maintained Self-Testing Hanging Blade Exit Sign

X-MP LED 3 Hour Maintained Self-Testing Hanging Blade Exit Sign

X-MP LED 3 Hour Maintained Self-Testing Hanging Blade Exit SignThe X-MP Light is a decorativechain suspended edge-illuminated escape route and direction sign.Comprising a white finished base and suspended gear enclosure on chrome chain the X-MP Light is fitted with a BS7010 legend panel. The unit is designed for chain suspension and a chrome effect chain is provided. Cable entry is by a BESA entry in the base.The X-MP Light is white as standard and is also available in alternative finishes including British Standard RAL colour black polished brass chrome and satin finishes.Key FeaturesChain Suspended 400mm dropSurface mountHigh output LED light sourceIP20Chrome and white finishes availableChoice of LegendSwitchable maintained unitDALI and Self-Test optionsAlternative colour and finishes available

GBP 180.85
1

Solo 330 Aerosol Smoke and CO Dispenser

Solo 330 Aerosol Smoke and CO Dispenser

Solo 330 Aerosol Smoke and CO DispenserThe Solo 330 smokeCO dispenser with its injection-moulded construction and swing frame make it the ideal tool for testing virtually all types and makes of modern smoke detectors at heights of up to 9 metres Using the SOLO100-001 Pole. Ergonomically designed for optimum use with the Solo Aerosol range together offering fully controlled and efficient testing. The Solo 330 is for use when testing detectors of up to 100mm in diameter.Robust - to withstand the rigours of everyday useStrength and durability - to ensure long lifeInjection-moulded plastic design - minimises weightSpring loaded mechanism - effective areosol deliveryDispenser and diaphram contain particles - conserves aerosolAerosol spray not directed at detector - sensor not swampedTouch sensitive - ideal for suspended ceilingsUniversal - suits most detectors from normal height to 9 metresClear cup and diaphram - allows view of detector LEDInterchangeable with all other Solo Tools

GBP 346.99
1

Vimpex SL-FT-EOL-EN Signaline EN 2 Zone EOL Enclosure

Vimpex SL-FT-EOL-EN Signaline EN 2 Zone EOL Enclosure

Vimpex SL-FT-EOL-EN Signaline EN 2 Zone EOL EnclosureThe Signaline FT-EOL-EN End-of-Line Unit has been approvedto EN54-282016 for use with the LocatorPlus-EN Control Unit and FT-78-EN orFT-88-EN Signaline Linear Heat Detection cables.It is designed to effectivelyterminate up-to two zones of FT-78-EN or FT-88-EN cable in a secureweatherproof enclosure.Furthermore the built-in switches for testing a fault andalarm condition allow the integrity of the whole system to be functionallychecked in situ providing comprehensive testing and maintenance of the system.Key FeaturesApproved to EN54-282016

GBP 216.71
1

Emergency Lighting X-MPC3MDALI LED Maintained DALI Ceiling Mounted Exit Sign - Down

Emergency Lighting X-MPC3MDALI LED Maintained DALI Ceiling Mounted Exit Sign - Down

Emergency Lighting X-MPC3MDALI LED Maintained DALI Ceiling Mounted Exit Sign - DownThis blade emergency escape route sign is designed for surface mounted installations. It features a high output rigid LED strip in a compact shell and provides a 30 metre viewing distance.Key FeaturesSurface ceiling mountHigh output LED light sourceIP20Choice of LegendOption to connect to a wireless self testing systemAlternative colour finish options0C to 25C operating temperature

GBP 202.50
1

Gent S4T-720-V-VAD-HPR S4 SELF TEST Heat Sensor amp Voice Sounder amp High Power Red VAD

Gent S4T-720-V-VAD-HPR S4 SELF TEST Heat Sensor amp Voice Sounder amp High Power Red VAD

Gent S4T-720-V-VAD-HPR S4 SELF TEST Heat Sensor Voice Sounder High Power Red VADThis device has a new IP21 external moulding new detector chamber design anda dual microprocessor PCB. This design delivers even better smoke detection andvoice storage capacity. In addition the award-winning Self-Test feature allows boththe heat and optical sensors within the device to be tested using the CLSS app.The Self-Test patented design performs real sensor tests by heating the heat sensing thermistor and generating real aerosol smoke to test the optical sensor. The small fan within the device gently blows the aerosol from the detection chamber through the detectors smoke entry points into the room. This method simulates a more realistic fire test than many traditional testing methods ensuring that the smoke entry points are not blocked and able to detect a real fire.Each device also incorporates Bluetooth Low Energy BLE. When activated BLE acts like a beacon in each detector that can be automatically detected by a mobile device using the CLSS app. This has many helpful features such as finding a device automatically ensuring the device details are correct and proving that an engineer has been within the visual inspection range.Key Features Available in a large range of multi-sensorPart-23 VAD and sounder voice options. Enables discrete functional testing andvisual inspection of the fire alarm systemby reducing the engineer toolset to justa mobile device phone or tablet. Nomore impact on building occupiers. Tests both the heat and smokesensors by heating the thermistorand introducing small amounts ofsmoke into the detection chamber. Gently blows the smoke out of thedetection chamber and smoke entrypoints to ensure they are not blocked. Flexible testing options allow the engineerto test in different ways single devicedetection zone loops panels. Allows up to 6 devices to be tested atonce per loop and any number of loopscan be tested simultaneously makingthe functional testing incredibly fast. Device testing is fast enough to allowup to 4 functional tests to be performedper year for the lifespan of the device. Eliminates all access issues whendetector testing ensuring 100functional testing is achieved. Allows the system to remain active whilsttesting as each detector is only offline for60 seconds and outputs are not generated. Any fires detected outside of thedevices performing Self-Test will stopthe Self-Test process and operatethe fire systems Cause Effect. Allows the engineer to easily locatethe detector using the App and BLEto check the device number labelzone description and detector type. Allows simple device updates tobe performed through the Appincluding the correction of inaccuratedevice labels and loop mapping. The app and BLE handshakeverifies that the engineer has beenwithin visual inspection range. Optional Inspection prompt LEDs onthe device let the engineer know whatSelf-Test devices need to be visuallyinspected and will automatically turn offwhen the visual inspection is complete. Engineers can spend more time digitallycapturing non-compliance issues andadvising how to resolve them. Thisincludes any issues causing false alarms. Test Fire LED option in the App allowsthe fire LED to be tested a pendingBS5839-1 testing requirement. Thisfeature can additionally confirm thatthey are inspecting the correct device. The CLSS App allows the engineerto simulate a fire and test theCause Effect logic. The CLSS App also allows theCause Effect to be triggeredthrough a successful Self-Testoperation allowing a witness test tobe performed using real smoke.

GBP 189.40
1

Gent S4T-711-V S4 SELF TEST Dual Optical Heat Sensor amp Voice Sounder

Gent S4T-711-V S4 SELF TEST Dual Optical Heat Sensor amp Voice Sounder

Gent S4T-711-V S4 SELF TEST Dual Optical Heat Sensor Voice SounderThis device has a new IP21 external moulding new detector chamber design anda dual microprocessor PCB. This design delivers even better smoke detection andvoice storage capacity. In addition the award-winning Self-Test feature allows boththe heat and optical sensors within the device to be tested using the CLSS app.The Self-Test patented design performs real sensor tests by heating the heat sensing thermistor and generating real aerosol smoke to test the optical sensor. The small fan within the device gently blows the aerosol from the detection chamber through the detectors smoke entry points into the room. This method simulates a more realistic fire test than many traditional testing methods ensuring that the smoke entry points are not blocked and able to detect a real fire.Each device also incorporates Bluetooth Low Energy BLE. When activated BLE acts like a beacon in each detector that can be automatically detected by a mobile device using the CLSS app. This has many helpful features such as finding a device automatically ensuring the device details are correct and proving that an engineer has been within the visual inspection range.Key Features Available in a large range of multi-sensorPart-23 VAD and sounder voice options. Enables discrete functional testing andvisual inspection of the fire alarm systemby reducing the engineer toolset to justa mobile device phone or tablet. Nomore impact on building occupiers. Tests both the heat and smokesensors by heating the thermistorand introducing small amounts ofsmoke into the detection chamber. Gently blows the smoke out of thedetection chamber and smoke entrypoints to ensure they are not blocked. Flexible testing options allow the engineerto test in different ways single devicedetection zone loops panels. Allows up to 6 devices to be tested atonce per loop and any number of loopscan be tested simultaneously makingthe functional testing incredibly fast. Device testing is fast enough to allowup to 4 functional tests to be performedper year for the lifespan of the device. Eliminates all access issues whendetector testing ensuring 100functional testing is achieved. Allows the system to remain active whilsttesting as each detector is only offline for60 seconds and outputs are not generated. Any fires detected outside of thedevices performing Self-Test will stopthe Self-Test process and operatethe fire systems Cause Effect. Allows the engineer to easily locatethe detector using the App and BLEto check the device number labelzone description and detector type. Allows simple device updates tobe performed through the Appincluding the correction of inaccuratedevice labels and loop mapping. The app and BLE handshakeverifies that the engineer has beenwithin visual inspection range. Optional Inspection prompt LEDs onthe device let the engineer know whatSelf-Test devices need to be visuallyinspected and will automatically turn offwhen the visual inspection is complete. Engineers can spend more time digitallycapturing non-compliance issues andadvising how to resolve them. Thisincludes any issues causing false alarms. Test Fire LED option in the App allowsthe fire LED to be tested a pendingBS5839-1 testing requirement. Thisfeature can additionally confirm thatthey are inspecting the correct device. The CLSS App allows the engineerto simulate a fire and test theCause Effect logic. The CLSS App also allows theCause Effect to be triggeredthrough a successful Self-Testoperation allowing a witness test tobe performed using real smoke.

GBP 190.24
1

Gent S4T-711-VAD-HPR S4 SELF TEST Dual Optical Heat Sensor amp High Power Red VAD

Gent S4T-711-VAD-HPR S4 SELF TEST Dual Optical Heat Sensor amp High Power Red VAD

Gent S4T-711-VAD-HPR S4 SELF TEST Dual Optical Heat Sensor High Power Red VADThis device has a new IP21 external moulding new detector chamber design anda dual microprocessor PCB. This design delivers even better smoke detection andvoice storage capacity. In addition the award-winning Self-Test feature allows boththe heat and optical sensors within the device to be tested using the CLSS app.The Self-Test patented design performs real sensor tests by heating the heat sensing thermistor and generating real aerosol smoke to test the optical sensor. The small fan within the device gently blows the aerosol from the detection chamber through the detectors smoke entry points into the room. This method simulates a more realistic fire test than many traditional testing methods ensuring that the smoke entry points are not blocked and able to detect a real fire.Each device also incorporates Bluetooth Low Energy BLE. When activated BLE acts like a beacon in each detector that can be automatically detected by a mobile device using the CLSS app. This has many helpful features such as finding a device automatically ensuring the device details are correct and proving that an engineer has been within the visual inspection range.Key Features Available in a large range of multi-sensorPart-23 VAD and sounder voice options. Enables discrete functional testing andvisual inspection of the fire alarm systemby reducing the engineer toolset to justa mobile device phone or tablet. Nomore impact on building occupiers. Tests both the heat and smokesensors by heating the thermistorand introducing small amounts ofsmoke into the detection chamber. Gently blows the smoke out of thedetection chamber and smoke entrypoints to ensure they are not blocked. Flexible testing options allow the engineerto test in different ways single devicedetection zone loops panels. Allows up to 6 devices to be tested atonce per loop and any number of loopscan be tested simultaneously makingthe functional testing incredibly fast. Device testing is fast enough to allowup to 4 functional tests to be performedper year for the lifespan of the device. Eliminates all access issues whendetector testing ensuring 100functional testing is achieved. Allows the system to remain active whilsttesting as each detector is only offline for60 seconds and outputs are not generated. Any fires detected outside of thedevices performing Self-Test will stopthe Self-Test process and operatethe fire systems Cause Effect. Allows the engineer to easily locatethe detector using the App and BLEto check the device number labelzone description and detector type. Allows simple device updates tobe performed through the Appincluding the correction of inaccuratedevice labels and loop mapping. The app and BLE handshakeverifies that the engineer has beenwithin visual inspection range. Optional Inspection prompt LEDs onthe device let the engineer know whatSelf-Test devices need to be visuallyinspected and will automatically turn offwhen the visual inspection is complete. Engineers can spend more time digitallycapturing non-compliance issues andadvising how to resolve them. Thisincludes any issues causing false alarms. Test Fire LED option in the App allowsthe fire LED to be tested a pendingBS5839-1 testing requirement. Thisfeature can additionally confirm thatthey are inspecting the correct device. The CLSS App allows the engineerto simulate a fire and test theCause Effect logic. The CLSS App also allows theCause Effect to be triggeredthrough a successful Self-Testoperation allowing a witness test tobe performed using real smoke.

GBP 192.79
1

Gent S4T-711-V-VAD-HPR S4 SELF TEST Dual Optical Heat Sensor amp Voice Sounder amp High Power Red

Gent S4T-711-V-VAD-HPR S4 SELF TEST Dual Optical Heat Sensor amp Voice Sounder amp High Power Red

Gent S4T-711-V-VAD-HPR S4 SELF TEST Dual Optical Heat Sensor Voice Sounder High Power RedThis device has a new IP21 external moulding new detector chamber design anda dual microprocessor PCB. This design delivers even better smoke detection andvoice storage capacity. In addition the award-winning Self-Test feature allows boththe heat and optical sensors within the device to be tested using the CLSS app.The Self-Test patented design performs real sensor tests by heating the heat sensing thermistor and generating real aerosol smoke to test the optical sensor. The small fan within the device gently blows the aerosol from the detection chamber through the detectors smoke entry points into the room. This method simulates a more realistic fire test than many traditional testing methods ensuring that the smoke entry points are not blocked and able to detect a real fire.Each device also incorporates Bluetooth Low Energy BLE. When activated BLE acts like a beacon in each detector that can be automatically detected by a mobile device using the CLSS app. This has many helpful features such as finding a device automatically ensuring the device details are correct and proving that an engineer has been within the visual inspection range.Key Features Available in a large range of multi-sensorPart-23 VAD and sounder voice options. Enables discrete functional testing andvisual inspection of the fire alarm systemby reducing the engineer toolset to justa mobile device phone or tablet. Nomore impact on building occupiers. Tests both the heat and smokesensors by heating the thermistorand introducing small amounts ofsmoke into the detection chamber. Gently blows the smoke out of thedetection chamber and smoke entrypoints to ensure they are not blocked. Flexible testing options allow the engineerto test in different ways single devicedetection zone loops panels. Allows up to 6 devices to be tested atonce per loop and any number of loopscan be tested simultaneously makingthe functional testing incredibly fast. Device testing is fast enough to allowup to 4 functional tests to be performedper year for the lifespan of the device. Eliminates all access issues whendetector testing ensuring 100functional testing is achieved. Allows the system to remain active whilsttesting as each detector is only offline for60 seconds and outputs are not generated. Any fires detected outside of thedevices performing Self-Test will stopthe Self-Test process and operatethe fire systems Cause Effect. Allows the engineer to easily locatethe detector using the App and BLEto check the device number labelzone description and detector type. Allows simple device updates tobe performed through the Appincluding the correction of inaccuratedevice labels and loop mapping. The app and BLE handshakeverifies that the engineer has beenwithin visual inspection range. Optional Inspection prompt LEDs onthe device let the engineer know whatSelf-Test devices need to be visuallyinspected and will automatically turn offwhen the visual inspection is complete. Engineers can spend more time digitallycapturing non-compliance issues andadvising how to resolve them. Thisincludes any issues causing false alarms. Test Fire LED option in the App allowsthe fire LED to be tested a pendingBS5839-1 testing requirement. Thisfeature can additionally confirm thatthey are inspecting the correct device. The CLSS App allows the engineerto simulate a fire and test theCause Effect logic. The CLSS App also allows theCause Effect to be triggeredthrough a successful Self-Testoperation allowing a witness test tobe performed using real smoke.

GBP 235.25
1

Gent S4TB-711-V-VAD-HPR S4 SELF TEST Black Dual Optical Heat Sensor amp Voice Sounder amp High Power Red VAD - Black

Gent S4TB-711-V-VAD-HPR S4 SELF TEST Black Dual Optical Heat Sensor amp Voice Sounder amp High Power Red VAD - Black

Gent S4TB-711-V-VAD-HPR S4 SELF TEST Black Dual Optical Heat Sensor Voice Sounder High Power Red VAD - BlackThis device has a new IP21 external moulding new detector chamber design anda dual microprocessor PCB. This design delivers even better smoke detection andvoice storage capacity. In addition the award-winning Self-Test feature allows boththe heat and optical sensors within the device to be tested using the CLSS app.The Self-Test patented design performs real sensor tests by heating the heat sensing thermistor and generating real aerosol smoke to test the optical sensor. The small fan within the device gently blows the aerosol from the detection chamber through the detectors smoke entry points into the room. This method simulates a more realistic fire test than many traditional testing methods ensuring that the smoke entry points are not blocked and able to detect a real fire.Each device also incorporates Bluetooth Low Energy BLE. When activated BLE acts like a beacon in each detector that can be automatically detected by a mobile device using the CLSS app. This has many helpful features such as finding a device automatically ensuring the device details are correct and proving that an engineer has been within the visual inspection range.Key Features Available in a large range of multi-sensorPart-23 VAD and sounder voice options. Enables discrete functional testing andvisual inspection of the fire alarm systemby reducing the engineer toolset to justa mobile device phone or tablet. Nomore impact on building occupiers. Tests both the heat and smokesensors by heating the thermistorand introducing small amounts ofsmoke into the detection chamber. Gently blows the smoke out of thedetection chamber and smoke entrypoints to ensure they are not blocked. Flexible testing options allow the engineerto test in different ways single devicedetection zone loops panels. Allows up to 6 devices to be tested atonce per loop and any number of loopscan be tested simultaneously makingthe functional testing incredibly fast. Device testing is fast enough to allowup to 4 functional tests to be performedper year for the lifespan of the device. Eliminates all access issues whendetector testing ensuring 100functional testing is achieved. Allows the system to remain active whilsttesting as each detector is only offline for60 seconds and outputs are not generated. Any fires detected outside of thedevices performing Self-Test will stopthe Self-Test process and operatethe fire systems Cause Effect. Allows the engineer to easily locatethe detector using the App and BLEto check the device number labelzone description and detector type. Allows simple device updates tobe performed through the Appincluding the correction of inaccuratedevice labels and loop mapping. The app and BLE handshakeverifies that the engineer has beenwithin visual inspection range. Optional Inspection prompt LEDs onthe device let the engineer know whatSelf-Test devices need to be visuallyinspected and will automatically turn offwhen the visual inspection is complete. Engineers can spend more time digitallycapturing non-compliance issues andadvising how to resolve them. Thisincludes any issues causing false alarms. Test Fire LED option in the App allowsthe fire LED to be tested a pendingBS5839-1 testing requirement. Thisfeature can additionally confirm thatthey are inspecting the correct device. The CLSS App allows the engineerto simulate a fire and test theCause Effect logic. The CLSS App also allows theCause Effect to be triggeredthrough a successful Self-Testoperation allowing a witness test tobe performed using real smoke.

GBP 319.33
1

Electro-Detectors EDA-T6085 Radio InputOutput Unit DC with SMA for External Antenna

Electro-Detectors EDA-T6085 Radio InputOutput Unit DC with SMA for External Antenna

Electro-Detectors EDA-T6085 Radio InputOutput Unit DC with SMA for External AntennaA wireless input output interface unit with SMA antenna socket external antenna supplied separately.The Zerio Plus IO unit from Electro-Detectors represents a new benchmark in terms of what the marketplace can expect from a radio IO unit. This single unit has a whole host of modes of operation giving huge flexibility for what the unit can be used for. The unit is the latest development from a company which has over 30 years of designing and manufacturing radio fire alarm systems.Based on the highly successful Millennium and Zerio ranges the addressable unit contains a powerful processor utilising surface mount technology to achieve the ultimate in performance and reliability.Long operational life and stable operation has been successfully achieved by using sophisticated protocols and the most technologically advanced components.A unique serial number and the length of time in service is stored in its internal memory. All data is retained in this non-volatile memory which is not corrupted or erased even should power be removed. A battery life of up to 3 years and continual monitoring minimise maintenance but sophisticated self-testing ensure confidence in the units operation.The Zerio Plus IO unit is fully compliant with the relevant sections of BS5839 and EN54 including Part 25. The unit is supplied complete with transmitter mounting box and battery and just requires two screws to mount the unit to the wall.

GBP 287.82
1

Evacuator FMCEVASYNP4 Synergy Smoke Detector

Evacuator FMCEVASYNP4 Synergy Smoke Detector

Evacuator FMCEVASYNP4 Synergy Smoke DetectorThe new Synergy Smoke Detector is one of the new auto detection units by Evacuator Alarms. The device uses the built in smoke detector to automatically detect smoke and trigger any linked devices.The device also features three easy to use buttons for manual testing and easy pairing modes. The smoke detector head can be swapped out for compatible Synergy heat detector heads making it easy to meet requirements.Please Note this product is for indoor use only.Key FeaturesOptical Smoke DetectorUp to 3 years Battery LifeCategory One radio moduleCE UKCA ROHS EMC CompliantBattery Low indicationSecure Reset FunctionStatus LEDTotally wire free operationMesh Radio connectivityRadio Frequency 869Mhz2Km line of sight range

GBP 266.02
1

C-Tec FPROSG Calibrated Audio Signal Generator

C-Tec FPROSG Calibrated Audio Signal Generator

C-Tec FPROSG Calibrated Audio Signal GeneratorEnsure your induction loop systems meet current British standards with C-Tecs innovative and very cost-effective new FPROSG Audio Signal Generator. Factory calibrated to provide a fixed audio signal the generator includes all of the test tones required to test an AFILS to BS 7594 1 kHz sine wave frequency response and metal compensation plus speech and music tracks to assist with subjective testing.

GBP 252.58
1

Vesda Xtralis Tamper Proof Sampling Point VSP-610

Vesda Xtralis Tamper Proof Sampling Point VSP-610

Vesda Xtralis Tamper Proof Sampling Point VSP-610Aspirating Smoke Detection ASD provides the assurance of active sampling and flow monitoring of a protected environment.A tamper-proof and flush-mount sampling point provides an inconspicuous sampling solution for a myriad of applications that require discrete sampling.The Xtralis Tamper Proof Sampling Points TPSP provide an elegant addition to modern decor and can both minimize the risk of vandalism and tolerate abuse.They also provide serviceability for dirty and hazardous environments and areas prone to tampering.Key Features Quality robust constructionHidden detection - concealedTamper proof designNew and retrofit friendlyConvenient testing and maintenance location via a centrally and remotely mounted detectorStandard pipe and capillary tube interfacesMetric and imperial

GBP 255.16
1

Testifire XTR2 TES3-6PACK-001 Smoke Cartridge - Pack Of 6

Testifire XTR2 TES3-6PACK-001 Smoke Cartridge - Pack Of 6

Testifire XTR2 TES3-6PACK-001 Smoke Cartridge - Pack Of 6Non-hazardous non-pressurised smoke cartridges designed specifically for use with Testifire XTR2.Testifire XTR2 is the next generation of our popular Testifire product however it is much more than just a functional test tool. Testifire XTR2 has compliance at its core its unique features enable compliant testing to be carried out and via an App and supporting cloud-portal ensure test results can be recorded automatically at the time of test giving fire service managers and building owners the ultimate proof of test.Please note This capsule is not suitable for use with the Testifire 1001 2001.

GBP 392.24
1

Testifire XTR2 TES3-3PACK-001 Smoke Cartridge - Pack Of 3

Testifire XTR2 TES3-3PACK-001 Smoke Cartridge - Pack Of 3

Testifire XTR2 TES3-3PACK-001 Smoke Cartridge - Pack Of 3Non-hazardous non-pressurised smoke cartridges designed specifically for use with Testifire XTR2.Testifire XTR2 is the next generation of our popular Testifire product however it is much more than just a functional test tool. Testifire XTR2 has compliance at its core its unique features enable compliant testing to be carried out and via an App and supporting cloud-portal ensure test results can be recorded automatically at the time of test giving fire service managers and building owners the ultimate proof of test.Please note This capsule is not suitable for use with the Testifire 1001 2001.

GBP 196.15
1