2 results (0,12880 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Cooper Fulleon 1450-CSA Thermoplastic Flood Detector Terminal Connection 1224Vdc Relay Output

Cooper Fulleon 1450-CSA Thermoplastic Flood Detector Terminal Connection 1224Vdc Relay Output

Cooper Fulleon 1450-CSA Thermoplastic Flood Detector Terminal Connection 1224Vdc Relay OutputSensor detecting water through 4 gold-plated supporting feet. It is normally used for the protection against the flooding of computer centres boiler rooms offices laboratories etc.Must not be used with flammable liquids.Version 1450-CSA available with 12 or 24 V DC power supply isequipped with changeover relay output to control automatic phone diallers and alarm sirens. It can also be connected to several external probes 1450-S-CSA up to 10.For higher protection it is also equipped with a moisture detector whose sensitivity can be regulated by an internal trimmer.Key FeaturesSmall sizeDetection of water and moistureTerminal connection1450 with relay output1224VdcCan be connected to external probes

GBP 8.10
1

C-Tec BF376 Relay on a Plate 24v 5A Single Gang

C-Tec BF376 Relay on a Plate 24v 5A Single Gang

BF376 Relay on a Plate 24v 5A Single GangThe BF376 is a general purpose double-pole polarised 24V 5A relay designed for use in 24V fire alarm systems. It incorporates a high intensity LED which illuminates red when the relay is active. It may be connected to a suitable control panel relay output or a standard polarised fire alarm sounder circuit to operate door retaining magnets roller shutter doors etc.Please note if connecting to a sounder circuit the relay will return to its normal state when the fire condition is cleared or silenced. Check with the approving authority that the proposed arrangement is acceptable prior to installation. The relay can be mounted on 25mm flush or surface mount back boxes. Mains wiring if used should be provided in accordance with the current edition of the IEE Wiring Regs.16th.Ed.The general requirement for any mains supply to the BF376 is fixed wiring using three core cable not less than 1mm2 fed from an isolating switch fuse spur fused at 5A max. This should be exclusive to the BF376 and its load and be labelled accordingly. As an alternative to a switched fused spur any double pole isolating device with a contact separation of 3mm or greater which is fitted with suitable in-circuit protection devices and meets the appropriate national wiring regulations can be used.Technical InformationActivation current Typically 30mA 24VDCIndicators Red relay activated LEDConnections V -V Supply NC C NO SW1 SW2. Contact rating 24Vdc is 5A resistive 2A inductive Contact rating 240Vac is 5A resistive 2A inductiveProduct dimensions mm 85w x 85h x 27d mm can be mounted onto a standard UK 25mm single gang flush or surface back boxConstruction finish White PVC plate light grey label silver nickel contactsIP Rating IP40Weight 78gOperating temperature -10C to 60CKey FeaturesA general purpose double-pole polarised 24V 5A relay designed for use in 24V fire alarm systemsIncorporates a high intensity LED which illuminates red when the relay is activeCan be connected to a suitable control panel relay output or a standard polarised fire alarm sounder circuit to operate door retaining magnets rollershutter doors etcCan be mounted on 25mm flush or surface mount back boxes

GBP 8.15
1