126 results (0,15058 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

C-Tec BF430CEASR EA Wall Sounder Self-Testing Red

C-Tec BF430CEASR EA Wall Sounder Self-Testing Red

C-Tec BF430CEASR EA Wall Sounder Self-Testing RedA self-testing wall sounder designed for use with C-TECs CAST-powered EVAC-ALERT evacuation alert system.Key FeaturesDesigned for use on a C-TEC CAST-powered EVAC-ALERT systemSelf-testing functionality means access to a flat is only required when a fault is detectedEmits a clear concise and recognisable evacuation alarm toneImpressive 100dBA sound output at 1mLow 5.5mA alarm currentIP21C ratedComplies with EN54-3Reliable hard-wired technology

GBP 74.59
1

C-Tec BF430CEASW EA Wall Sounder - Self Testing - White

C-Tec BF430CEASW EA Wall Sounder - Self Testing - White

C-Tec BF430CEASW EA Wall Sounder - Self Testing - WhiteThe BF430CEASW is a new EN54-3 compliant evacuation alert system from C-TEC specifically designed to assist the fire rescue services FRS in evacuating high-rise residential buildings. The device offers low current consumption emitting a clear concise and recognisable evacuation alarm tone.Details Designed for use on a C-TEC CAST-powered EVAC-ALERT system Self-testing functionality means access to a flat is only required when a fault is detected Emits a clear concise and recognisable evacuation alarm tone Impressive 100dBA sound output at 1m Low 5.5mA alarm current IP21C rated. Complies with EN54-3 Red version also available order code BF430CEASR

GBP 74.59
1

Ringtail X-CS3M LED Maintained Self-Testing Bulkhead IP65

Ringtail X-CS3M LED Maintained Self-Testing Bulkhead IP65

Ringtail X-CS3M LED Maintained Self-Testing Bulkhead IP65The X-CS3M light is a high light output emergency bulkhead with the added benefit of utilising LEDs and a self-test facility. This LED bulkhead is a self-test emergency luminaire suitable for internal and external environments. It uses 6 high output LEDs with a moulded self-extinguishing polycarbonate base and fitted with a fresnel diffuser suitable for use on escape routes 850 degrees C Hot-wire test defined by ICEL.The diffuser is screw fixed and sealed by gasket to the base to provide IP65 protection. The gear tray is hinged and fully removable and cable entries are provided in the ends and base. This bulkhead can be fitted with a universal legend kit part no. ULK making it suitable for use as exit signs.Key FeaturesIP65PolycarbonateABS ConstructionClear Fresnel DiffuserRemovable Hinged Gear TrayExit SignsSelf-Test6 LEDsInternal External

GBP 55.91
1

Fireclass 516.016.028FC LHD Junction EOL Box

Fireclass 516.016.028FC LHD Junction EOL Box

Fireclass 516.016.028FC LHD Junction EOL BoxThe ProReact Digital End-of-Line Unit is designed to effectively terminate up-to two zones of ProReact EN Digital LHD cable in a secure weatherproof enclosure.Furthermore the built-in switches for testing a fault and alarm condition allow the integrity of the whole system to be functionally checked in situ providing comprehensive testing and maintenance of the system.Typical ApplicationsCar parksOil and gas tank farmsMinesCable traysCold storageConveyor beltsKey FeaturesWeatherproof enclosureBuilt-in switchesThe first digital linear heat detection system to be certified to EN54-282016Improved testing and maintenance functionalityManufactured in the UK

GBP 73.60
1

Fireclass 516.016.175FC ProReact EN Digital End of Line

Fireclass 516.016.175FC ProReact EN Digital End of Line

Fireclass 516.016.175FC ProReact EN Digital End of LineThermocables ProReact Digital End-of-line Unit with test facility has also been certified to EN54-282016 and enables users to undertake hassle-free functional testing of the system. Users can verify normal conditions trouble and alarm functions of a system by simulating a break in the cable or overheat condition.Key FeaturesThe first digital linear heat detection system to be certified to EN54-282016Improved testing and maintenance functionalityManufactured in the UK

GBP 73.60
1

Kidde DP721RT Dx700 Series Conventional Multisensor Fire Detector With Relay

Kidde DP721RT Dx700 Series Conventional Multisensor Fire Detector With Relay

Kidde DP721RT Dx700 Series Conventional Multisensor Fire Detector With RelayAll Aritech 700 series smoke detectors continuously monitor their sensitivity and operational status. Background drift is daily compensated to maintain the original calibrated sensitivity within the required limits.Once a day the detector performs a full diagnostic test that includes dynamically testing the sensing chamber and internal electronics. If a detector drifts out of sensitivity range or fails the internal diagnostics test this is reported back to the panel and indicated on the detector with a yellow fault LED.Maintenance friendly sensitivity level test modeThe 700 Series photoelectric detectors include a sensitivity test mode that may be activated by simply holding a magnet near the detectors test point. This initiates a self-diagnostic routine and provides visual indication if service is required. This test mode allows field sensitivity testing without the requirement for external meters or test gas.Field cleaning and serviceThe photoelectric sensing chamber unclips from the detector for easy field cleaning and service. During regular maintenance the detector cover can be removed the optical chamber removed and replaced by a low cost new chamber. On power up the detector auto-calibrates and returns to normal operating mode without any further intervention.The right detector for the right jobFor a truly fast and broad-spectrum detection the DP721RTA offers both optical and heat sensors. The interaction of both the smoke and heat algorithms ensure a quick response to both flaming and smouldering fires.All bases are provided with an integral locking tab for extra security if required. Bases are equipped with a shorting bar between IN and OUT that opens when the head is installed and that may be manually restored when removing the head. This simplifies cable continuity testing.Key FeaturesAutomatic self diagnostics with dynamic full detector and sensitivity testHigh false alarm immunity with floating background with drift compensationSeparate fire and fault LEDs for unambiguous alarm reportingWide operating voltage for use on most conventional systemsPolarity insensitive for carefree installationCOMNONC contacts for easy supervision on any systemManual self diagnostic with visual sensitivity indicationField exchangeable and disposable optical chamber

GBP 46.97
1

Ringtail X-MRD3NMP LED Non-Maintained Recessed Spotlight

Ringtail X-MRD3NMP LED Non-Maintained Recessed Spotlight

Ringtail X-MRD3NMP LED Non-Maintained Recessed SpotlightThis innovative self-contained LED emergency Downlighterfeatures a single point high illumination white LED with an optical lens foreither corridor open area or flood. Suitable for modern buildings where highperformance and a minimum maintenance cost are essential.Key FeaturesHigh lumen outputLow power consumption3 optic options standard open area or corridorIP54 Recess mounting open area corridorDALI and Self-Testing options0C 25C operating temperature3W High Output 160mm ceiling void 43mmcutout

GBP 74.29
1

C-Tec QT606ALP Quantec Addressable Overdoor Light With Sounder Flat Plate Anti Ligature

C-Tec QT606ALP Quantec Addressable Overdoor Light With Sounder Flat Plate Anti Ligature

C-Tec QT606ALP Quantec Addressable Overdoor Light With SounderFlat Plate Anti LigatureAn addressable overdoor light sounder designed toincrease call indication levels in large Quantec sites. Can be programmed toilluminate and sound when certain groups of call points are calling. Ideal forproviding area indication or follow me lights at the ends of corridors etc Key FeaturesFlash and sounder rates changeintensify to reflect theurgency of incoming callsAdjustable volume controlDual red and green LEDs and triangular diffuser make it highlyvisible from a distanceMounts on a standard UK 25mm single gang flush or surfaceback boxFinished in tough durable ABS plastic

GBP 61.36
1

C-Tec QT606A Quantec Addressable Overdoor Light with Sounder

C-Tec QT606A Quantec Addressable Overdoor Light with Sounder

C-Tec QT606A Quantec Addressable Overdoor Light with SounderAn addressable overdoor light sounder designed to increase call indication levels in large Quantec sites.Can be programmed to illuminate and sound when certain groups of call points are calling. Ideal for providing area indication or follow me lights at the ends of corridors etcKey FeaturesFlash and sounderrates changeintensify to reflect the urgency of incoming calls.Adjustable volume control.Dual red and green LEDs and triangular diffuser make it highly visible from a distance.Mounts on a standard UK 25mm single gang flush or surface back box.Finished in tough durable ABS plastic.

GBP 57.24
1

Testifire XTR2 TESTIFIRE-MEML-001 Membrane for USA amp Middle East Regions

Testifire XTR2 TESTIFIRE-MEML-001 Membrane for USA amp Middle East Regions

Testifire XTR2 TESTIFIRE-MEML-001 Membrane for USA Middle East RegionsTestifire XTR2 is the next generation of our popular Testifire product however it is much more than just a functional test tool. Testifire XTR2 has compliance at its core its unique features enable compliant testing to be carried out and via an App and supporting cloud-portal ensure test results can be recorded automatically at the time of test giving fire service managers and building owners the ultimate proof of test.Whats in the reportThe test report is automatically generated on-site once the final detector has been tested. Its then immediately available for viewing by the relevant team members at the service company and then be sent to the client along with any other relevant documentation. The report combines all the data needed to prove testing has taken place and confirms the status of each detector automatically highlighting any areas of concern at the top of the document.Key FeaturesSpecialist membrane allowing use of Testifire XTR2 with larger detectors

GBP 45.65
1

Testifire XTR2 TESTIFIRE-WPSU-001 Wall PSU containing UK EU US AUS and NZ Adaptors

Testifire XTR2 TESTIFIRE-WPSU-001 Wall PSU containing UK EU US AUS and NZ Adaptors

Testifire XTR2 TESTIFIRE-WPSU-001 Wall PSU containing UK EU US AUS and NZ AdaptorsTestifire XTR2 is the next generation of our popular Testifire product however it is much more than just a functional test tool. Testifire XTR2 has compliance at its core its unique features enable compliant testing to be carried out and via an App and supporting cloud-portal ensure test results can be recorded automatically at the time of test giving fire service managers and building owners the ultimate proof of test.Whats in the reportThe test report is automatically generated on-site once the final detector has been tested. Its then immediately available for viewing by the relevant team members at the service company and then be sent to the client along with any other relevant documentation. The report combines all the data needed to prove testing has taken place and confirms the status of each detector automatically highlighting any areas of concern at the top of the document.Key FeaturesWall PSU for use with the Testifire XTR2 battery packContains UK EU US AUS AND NZ Adaptors

GBP 48.91
1

C-Tec BF446ACXDRLD CX Wall Voice Sounder Deep Base Red Lockdown

C-Tec BF446ACXDRLD CX Wall Voice Sounder Deep Base Red Lockdown

C-Tec BF446ACXDRLD CX Wall Voice Sounder Deep Base RedLockdownThe Hi-Output range of addressable loop-powered devicesinclude voice sounders and combined voice sounder VADs. Their purpose is tovisually and audibly alert building occupants of a fire alarm. They aredesigned for use with C-TECs ZFP and XFP Apollo Discovery panels and otherthird-party Apollo Discovery panels. However compatibility testing withthird-party panels is recommended to ensure correct operation.Please note this image is for illustrativepurposes only

GBP 76.22
1

Carrier ACA-TOUCH Touchless Request to Exit Button - Standard

Carrier ACA-TOUCH Touchless Request to Exit Button - Standard

Carrier ACA-TOUCH Touchless Request to Exit Button - StandardThe touchless exit buttons provide means to activate a request-to-exit with access control solutions without having to touch anything. This solution is achieved by using Infrared technology. Just move a hand near the front of the sensor to activate the contact. Activation is clearly indicated by an LED showing Green when active or RED when powered but not active.Please note that direct sunlight or reflections may affect the sensitivity of the infrared sensor.Key FeaturesTouchless exit button using IR sensorAttractive timeless designAdjustable distance 3-15 cmAdjustable relay activation periodRed and Green LED indication for standby and activeIndoor use only

GBP 53.84
1

Carrier ACA-TOUCH-SLIM Touchless Request to Exit Button - Slim

Carrier ACA-TOUCH-SLIM Touchless Request to Exit Button - Slim

Carrier ACA-TOUCH-SLIM Touchless Request to Exit Button - SlimThe touchless exit buttons provide means to activate a request-to-exit with access control solutions without having to touch anything. This solution is achieved by using Infrared technology. Just move a hand near the front of the sensor to activate the contact. Activation is clearly indicated by an LED showing Green when active or RED when powered but not active.Please note that direct sunlight or reflections may affect the sensitivity of the infrared sensor.Key FeaturesTouchless exit button using IR sensorAttractive timeless designAdjustable distance 3 to 15 cmAdjustable relay activation periodRed and Green LED indication for standby and active

GBP 53.84
1

Apollo SA5100-710APO Soteria Multi-Sensor Detector Dual OpticalHeat

Apollo SA5100-710APO Soteria Multi-Sensor Detector Dual OpticalHeat

Apollo SA5100-710APO Soteria Multi-Sensor Detector Dual OpticalHeatThe Apollo SA5100-710APO Soteria Multi-Sensor Detector Dual OpticalHeat uses advanced dual optical sensing technology to accurately detect smoke particles entering the chamber and a central heat thermistor for detecting heat. It has five different operating modes giving you the option to adapt the detector to suits it environment.Key Features of the SA5100-710APOAvailable with integrated switchable isolatorDrift compensationTricoloured LED status indicatorFasTest for quicker testing of detectorsLocking mechanism grub screwDIL Switch Addressing

GBP 48.30
1

Fireclass 516.016.018FC ProReact Analogue End Of Line Unit

Fireclass 516.016.018FC ProReact Analogue End Of Line Unit

Fireclass 516.016.018FC ProReact Analogue End Of Line UnitProReact EN Analogue End-of-line Unit is compulsory in all ProReact EN Analogue LHD systems as it has a key role in the operation of the technology allowing the control unit to detect a short circuit or open circuit in the sensor cable. It is small in size and is straightforward to be mounted on surfaces.Thermocables ProReact Digital End-of-line Unit with test facility has also been certified to EN54-282016 and enables users to undertake hassle-free functional testing of the system. Users can verify normal conditions trouble and alarm functions of a system by simulating a break in the cable or overheat condition.The ProReact technology offers an alternative solution to heat protection in a wide range of applications and industries from power generation to oil and gas. It is a cost-effective resettable and can be used in applications that are less suited to other types of fire detectors. The ProReact EN Analogue LHD system has a wide range of available alarm temperatures to suit different environments.Key FeaturesFor use with the ProReact Analogue ControllerSmall sizeImproved testing and maintenance functionalityManufactured in the UK

GBP 61.33
1

Aritech DMN960Y 990 Series Manual Call Point - Complete with Back Box and Resettable Element Yellow

Aritech DMN960Y 990 Series Manual Call Point - Complete with Back Box and Resettable Element Yellow

Aritech DMN960Y 990 Series Manual Call Point - Complete with Back Box and Resettable Element YellowThe DMN960Y is a surface mount YELLOW addressable 990 Series manual call point with a high strength plastic housing. The LED indicator provides visual confirmation of alarm initiation. The test key included with each unit facilitates functional testing of the call point. The manual call point is delivered complete with resettable element.Operating PrinciplesThe address of each call point is set at the commissioning stage by means of a seven-segment DIL switch. The device features plug and play terminal connections. A single alarm LED is provided on the call point and is controlled independently of the call point by the fire panel.AccessoriesIt is possible to surface or flush mount any of the call points in the range. Optional accessories to accommodate this are available separately.ApprovalsAll relevant manual call points in the range have been tested by LPC and approved by LPCB and a number of other approval authorities.Key FeaturesAddressable manual call pointLED alarm indicatorTamper resistant break glass designEasy to test with self-resetFast responsePlug and play terminal connections for fast wiringAllow wiring continuity testing before fittingResettable element fitted

GBP 70.24
1

Carrier ACA-STEEL-SLIM Touchless Request to Exit Button - Stainless Steel - Slim

Carrier ACA-STEEL-SLIM Touchless Request to Exit Button - Stainless Steel - Slim

Carrier ACA-STEEL-SLIM Touchless Request to Exit Button - Stainless Steel - SlimThe touchless exit buttons provide means to activate a request-to-exit with access control solutions without having to touch anything. This solution is achieved by using Infrared technology. Just move a hand near the front of the sensor to activate the contact. Activation is clearly indicated by an LED showing Green when active or Blue when powered but not active.Please note that direct sunlight or reflections may affect the sensitivity of the infrared sensor.Key FeaturesTouchless exit button using IR sensorAttractive timeless stainless steel designAdjustable distance 3 to 15 cmAdjustable relay activation periodBlue and Green LED indication for standby and activeIndoor use only

GBP 51.43
1

Aritech ACA-STEEL Touchless Request To Exit Button Stainless Steel Standard

Aritech ACA-STEEL Touchless Request To Exit Button Stainless Steel Standard

Aritech ACA-STEEL Touchless Request To Exit Button Stainless Steel StandardThe touchless exit buttons provide means to activate a request-to-exit with access control solutions without having to touch anything. This solution is achieved by using Infrared technology. Just move a hand near the front of the sensor to activate the contact. Activation is clearly indicated by an LED showing Green when active or Blue when powered but not active.Please note that direct sunlight or reflections may affect the sensitivity of the infrared sensor.Key FeaturesTouchless exit button using IR sensorAttractive timeless stainless steel designAdjustable distance 3 to 15 cmAdjustable relay activation periodBlue and Green LED indication for standby and activeIndoor use only

GBP 51.43
1

Nittan 24v Door Holder Floor Mounted 200N 3-84-0301

Nittan 24v Door Holder Floor Mounted 200N 3-84-0301

24v Door Holder Floor Mounted 200N 3-84-0301DescriptionThe 3-84-0301 is a 24V DC floor mounted magnetic door holder.Floor Mounted door holders are designed to hold open fire doors for ease of access and release them when an alarm is triggered. They are ideally suited to applications where maximum protection is needed against vandalism or accidental damage such as prisons and schools.They are also suited to applications where the door is not opening near a wall. They feature a rugged cast aluminium housing a holding magnet with integral ejection pin and a manual release switch. Cable entry can be through the base or through a 20mm hole provided in the housing for surface mounted conduit or pyro.

GBP 85.02
1

Apollo SA5100-760APO Soteria Multi-Sensor Detector OpticalHeat

Apollo SA5100-760APO Soteria Multi-Sensor Detector OpticalHeat

Apollo SA5100-760APO Soteria Multi-Sensor DetectorOpticalHeatThe Soteria Multi-Sensor Detector uses advanced opticalsensing technology PureLight to detect smoke particles entering the chamberand is fitted with two thermistors for detecting heat. It easily discriminatesagainst false alarm stimuli and is a great environmentally friendly alternativeto ionisation detectors.Key FeaturesFive modes of operation for ultimate fire detection andfalse alarm management in a wide range of applicationsUtilises digital Core Protocol communications providing arange of advanced fire detection featuresA sophisticated dynamic algorithm providing transientrejection and compensation for drift while maintaining accurate sensitivityFasTest for quicker testing of detectorsIntegrated switchable isolator

GBP 56.16
1

Cranford Controls 511-148 Sounder Beacons MED amp ABS Approved - Red - White LED - 24VDC Deep

Cranford Controls 511-148 Sounder Beacons MED amp ABS Approved - Red - White LED - 24VDC Deep

Cranford Controls 511-148 Sounder Beacons MED ABS Approved - Red - White LED - 24VDC DeepThe VTB EN54-3 approved sounderbeacon has undergone additional development to meet the needs of the harsh environments in marine applications.Marine variants come with 32 sounder tones that include the most common sound patterns and two marine specific tones.Key FeaturesProducts have undergone additional EMC vibration and salt mist testing for use in the maritime industryOne device with approved sounder function and energy efficient visual indicationSelectable sounder tones include Marine General Alarm and the International Marine Organisation Code 2 Continuous signals

GBP 49.62
1