ProfitSpring | B2B PPC Agency

Crowcon C01873 Gas Test Kit Magnet

Crowcon C01873 Gas Test Kit MagnetA Gas Test Kit Magnet replaces C01697 Crow mag key

GBP 46.66

1

International Gas Detectors 401101A Test Gas Applicator

International Gas Detectors 401101A Test Gas Applicator The 401101A is a test gas applicator for MK3 102 750 Series IGD ATEX Gas Detectors Fit 6 x 4mm ID Tube.

GBP 67.50

1

Wagner AD-10-0550 Test Pipe For Air Sampling Systems

Wagner AD-10-0550 Test Pipe For Air Sampling SystemsA Test Pipe designed for Wagner Air Sampling Systems.

GBP 85.15

1

C-Tec NC302RT Test Infrared Receiver

C-Tec NC302RT Test Infrared ReceiverThe NC302RT is a test infrared receiver to make fob testing simple. It is designed to be installed in a safe room or area. The fob to be tested is activated in this area. The LEDs of the tester will flash on successful activation but the system will not go into alarm.

GBP 77.92

1

Vesda WHTAST025I-10 25mm White Air Sampling Test Point PACK OF 10

Vesda WHTAST025I-10 25mm White Air Sampling Test Point PACK OF 10WHTAST025I-10 25mm White Air Sampling Test Point PACK OF 10

GBP 65.77

1

C-Tec QT302RT Quantec Test Infrared Ceiling Receiver

C-Tec QT302RT Quantec Test Infrared Ceiling ReceiverThe QT302RT is a test infrared receiver to make fob testing simple. It is designed to be installed in a safe room or area. The fob to be tested is activated in this area. The LEDs of the tester will flash on successful activation but the system will not go into alarm.

GBP 71.89

1

Vesda Xtralis 25mm White System Test Point PIP-018-W

Vesda Xtralis 25mm White System Test Point PIP-018-W Pack of 1025mm System Test Points are installed at the furthest point of the pipework and are used to introduce smoke in order to measure the time it takes for the smoke to reach the detectors. The maximum transport time is 120 seconds. They should always be connected withABS solvent cement.Key FeaturesMaterial ABSColour WhiteOperating temperature range -40C to 70CEN5425mmPack of 10Please note The PIP-018-W is equivalent to the WHTAST025I.

GBP 47.63

1

Gent S4-34899 Test Key for S4-34800 Range of MCP Pack of 25

Gent S4-34899 Test Key for S4-34800 Range of MCP Pack of 25The S4-34899 is a pack of call point keys for use with the new type Gent Vigilon Call Points.These keys allow the user to perform a test on a call point without breaking the glass in the unit. They also allow the front of the call point to be removed to allow access to the terminal connections within the call point.Key FeaturesPack of 25

GBP 45.01

1

Vesda Xtralis 25mm Air Sampling Test Point - Pack of 10

Vesda Xtralis 25mm Air Sampling Test Point - Pack of 10Air sampling test points allow for functional smoke testing of aspirating smoke detection systems and are typically located at the end of a sampling pipe network.VESDA provides the discreet detection required in heritage buildings by routing the sampling pipes in areas that are not visible from normal occupancy. Small-bore capillary pipes are used to provide detection at the required location. The room fabric often dictates the location of these capillary tubes. Hiding the capillary tubes behind light fittings blending in with ceiling paintings or forming part of the ceiling sculptures can all be used to provide invisible smoke detection.In high volume atria applications such as cathedrals capillary sample points can be routed into the area at intermediate vertical levels to good effect to overcome stratification. The higher potential sensitivity of the VESDA system means that less smoke is required at the sample points to provide an alarm condition.Key FeaturesOptimising performanceTough and durableChemical resistance propertiesCompatible with VESDA VESDA-E ICAM FAAST Airsense and SecuritonLightweightPack of 10Please note The PIP-018 is equivalent to the REDAST025I.

GBP 47.63

1

Morley ECO1000RTUA Remote LASER Tester for Vision Detectors

Morley ECO1000RTUA Remote LASER Tester for Vision DetectorsThe ECO1000RTUA is a Test Unit for Vision Detectors.The Laser remote tester can be used in conjunction with a wide range of ECO1000 series detectors. The device transmits a coded message which prevents false alarms generated by other devices using a laser. With a range of several meters the tester provides an easy way to test ECO1000 detectors and removes the need for direct physical access to the detector.Key FeaturesWireless remote test unit using laser beam for conventional ECO1000 series detectorsMaximum range 7m

GBP 52.33

1

Ziton ZP886R ZP7 Series Intelligent Addressable Manual Call Point

Ziton ZP886R ZP7 Series Intelligent Addressable Manual Call PointThe Ziton ZP886R is a red single action indoor Manual CallPoint MCP. It comes with resettable element test connector and test key.Multiple optional accessories are available to facilitate most indoorinstallation requirements.It is a standard profile indoor MCP suitable for surfaceand recess mount installations using standard or legacy European electricalboxes. With its designer dual tricolour LEDs it offers 180 clear localindication of its operational status even from a side view in a passageinstallation. Front access test key facility allows unhindered accessregardless of the installation location. The key doubles as a test anddisassembly tool allowing removal of the MCP front cover without the need foradditional tools. Deploy seamlessly into existing legacy systems without CIEconfiguration changes.Key FeaturesRed single actionReliable single action manual call point for surface andflush mountingDual tri-colour status indicators offers 180 alarmvisibilityTamper resistant design with resettable or frangible elementUnobtrusive front facing test facilityStandard mounting options facilitates easy retrofitting toexisting installationsMatching back box with rear top and bottom cable entryScreen connection terminal for electrically noisyinstallationsPluggable connector with link through facility for ease ofinstallation and pre-commissioning testingAn alarm flag on the face of the manual call point allowsalarm indication even without alarm LEDsFast no-tools-required maintenance using the test keyUp to 127 devices per loop

GBP 46.31

1

Ziton ZP886W ZP7 Addressable Manual Call Point White

Ziton ZP886W ZP7 Addressable Manual Call Point WhiteThe Ziton ZP886W is a white single action addressable indoor manual call point. It is delivered complete with resettable element test connector and test key. Multiple optional accessories are available to facilitate most indoor installation requirements.This single action MCP is a standard profile indoor MCP suitable for surface and recess mount installations using standard or legacy European electrical boxes. With its designer dual tricolour LEDs it offers 180 clear local indication of its operational status even from a side view in a passage installation. The clean face of the MCP is further enhanced by a front access and test key facility.CompatibilityThe ZP880 range may be used on compatible Ziton fire systems. They can be deployed seamlessly into existing legacy systems without CIE configuration changes.Installation and maintenance friendlyThe front-facing access for an aesthetically matching test key allows unhindered access regardless of the installation location. The MCP key doubles as a test and disassembly tool allowing removal of the MCP front cover without the need for additional tools.Key FeaturesReliable single action manual call point for surface mountingA dual tri-colour status indicator offers 180 alarm visibilityTamper resistant design with resettable or frangible elementStandard mounting options facilitates easy retrofitting to existing installationsUnobtrusive front facing test facilityMatching back box with rear top and bottom cable entryScreen connection terminal for electrically noisy installationsPluggable connector with link through facility for ease of installation and pre-commissioning testingAlarm flag on the face of the MCP allows alarm indication even without alarm LEDsFast no-tools-required maintenance using the test keyUp to 127 devices per loop

GBP 74.71

1

Ziton ZP886R-TSKIT ZP7 Series Intelligent Addressable Manual Call Point cw Skirt

Ziton ZP886R-TSKIT ZP7 Series Intelligent Addressable Manual Call Point cw SkirtThe ZP880 Series is an intelligent range of addressable manual call points. The ZP886R-TSKIT is a red single action indoor MCP. It is delivered complete with resettable element test connector and test key as well as a trim skirt for clean flush mount installation. Multiple optional accessories are available to facilitate most indoor installation requirements.Key FeaturesReliable single action manual call point for mounting on 3rd party wall boxesDual tri-colour status indicators offers 180 alarm visibilityTamper resistant design with resettable or optional frangible elementUnobtrusive front facing test facilityStandard mounting options facilitates easy retrofitting to existing installationsPluggable connector with link through facility for ease of installation and pre-commissioning testingAn alarm flag on the face of the manual call point allows alarm indication even without alarm LEDsFast no-tools-required maintenance using the test keyUp to 127 devices per loop

GBP 47.50

1

Fireclass 509.030.121FC Extinguishing Hold Off Manual Call Point

Fireclass 509.030.121FC Extinguishing Hold Off Manual Call PointThe509.030.121FC is anExtinguishing Hold Off Manual Call Point with activation and end of line resistors making it compatible with the Prescient III Suppression Panel. Operation is via a non-latching push button. This call point is surface mounted and comes complete with back box test key.Key FeaturesColour BlueCompatible with thePrescient III Suppression PanelSurface mountComes with back box and test key

GBP 45.79

1

Ziton ZP886R-KITF Intelligent Addressable Manual Call Point - Red cw Back Box amp Flip Cover

Ziton ZP886R-KITF Intelligent Addressable Manual Call Point - Red cw Back Box Flip CoverThe Ziton ZP886R is a red single action indoor Manual Call Point MCP. It comes with resettable element test connector and test key. Multiple optional accessories are available to facilitate most indoor installation requirements.It is a standard profile indoor MCP suitable for surface and recess mount installations using standard or legacy European electrical boxes. With its designer dual tricolour LEDs it offers 180 clear local indication of its operational status even from a side view in a passage installation. Front access test key facility allows unhindered access regardless of the installation location. The key doubles as a test and disassembly tool allowing removal of the MCP front cover without the need for additional tools. Deploy seamlessly into existing legacy systems without CIE configuration changes.Key FeaturesRed single actionReliable single action manual call point for surface and flush mountingDual tri-colour status indicators offers 180 alarm visibilityTamper resistant design with resettable or frangible elementUnobtrusive front facing test facilityStandard mounting options facilitates easy retrofitting to existing installationsMatching back box with rear top and bottom cable entryScreen connection terminal for electrically noisy installationsPluggable connector with link through facility for ease of installation and pre-commissioning testingAn alarm flag on the face of the manual call point allows alarm indication even without alarm LEDsFast no-tools-required maintenance using the test keyUp to 127 devices per loopComes with back box and flip cover

GBP 50.39

1

Ziton ZP886R-RMKIT ZP7 Series Intelligent Addressable Manual Call Point - Recess Mount

Ziton ZP886R-RMKIT ZP7 Series Intelligent Addressable Manual Call Point - Recess MountThe ZP880 Series is an intelligent range of addressable manual call points. The ZP886R-RMKIT is a red single action indoor MCP. It is delivered complete with resettable element test connector and test key as well as a surface mount adapter for 3rd party back boxes. Multiple optional accessories are available to facilitate most indoor installation requirements.Key FeaturesReliable single action manual call point for mounting on 3rd party wall boxesDual tri-colour status indicators offers 180 alarm visibilityTamper resistant design with resettable or optional frangible elementUnobtrusive front facing test facilityStandard mounting options facilitates easy retrofitting to existing installationsPluggable connector with link through facility for ease of installation and pre-commissioning testingAn alarm flag on the face of the manual call point allows alarm indication even without alarm LEDsFast no-tools-required maintenance using the test keyUp to 127 devices per loop

GBP 50.38

1

Kidde KE-DM3010YS99 3000 Series Intelligent Addressable Manual Call Point

Kidde KE-DM3010YS99 3000 Series Intelligent Addressable Manual Call PointThe KE-DM3000 Series is an intelligent range of addressable Excellence Series manual call points. The KE-DM3010YS99 is a yellow single action indoor MCP with an EXTINGUISHING RELEASE functional indication. It is delivered complete with resettable element test connector and test key. Multiple optional accessories are available to facilitate most indoor installation requirements.AestheticsThis single action MCP is a standard profile indoor MCP suitable for surface and recess mount installations using standard or legacy European electrical boxes. With its designer dual tricolour LEDs it offers 180 clear local indication of its operational status even from a side view in a passage installation. The clean face of the MCP is further enhanced by a front access test key facility.Installation maintenance friendlyThe front facing access for an aesthetically matching test key allows unhindered access regardless of the installation location. The MCP key doubles as a test and disassembly tool allowing removal of the MCP front cover without the need for additional tools.CompatibilityThe KE-DM3000 range may be used on all Kidde Excellence Series fire systems and are also compatible with legacy Aritech fire systems. They can in many cases be deployed into existing systems without CIE configuration changes.Key FeaturesReliable single action manual call point for recess or surface mountingDual tri-colour status indicators offers 180 alarm visibilityTamper resistant design with resettable or frangible elementUnobtrusive front facing test facilityStandard mounting options facilitates easy retrofitting to existing installationsBack box with rear top and bottom cable entryScreen connection terminal in the back box for electrically noisy installationsPluggable connector with link through facility for ease of installation and pre-commissioning testingAn alarm flag on the face of the manual call point allows alarm indication even without alarm LEDsFast no-tools-required maintenance using the test keyUp to 128 devices supported per loop

GBP 48.44

1

Kidde KE-DM3010WS99 Intelligent Addressable Manual Call Point - English White

Kidde KE-DM3010WS99 Intelligent Addressable Manual Call Point - English WhiteThe KE-DM3000 Series is an intelligent range of addressable Excellence Series manual call points. The KE-DM3010WS99 is a white single action indoor MCP with an ABORT EXTINGUISHING SYSTEM functional indication. It is delivered complete with resettable element test connector and test key. Multiple optional accessories are available to facilitate most indoor installation requirements.AestheticsThis single action MCP is a standard profile indoor MCP suitable for surface and recess mount installations using standard or legacy European electrical boxes. With its designer dual tricolour LEDs it offers 180 clear local indication of its operational status even from a side view in a passage installation. The clean face of the MCP is further enhanced by a front access test key facility.Installation maintenance friendlyThe front facing access for an aesthetically matching test key allows unhindered access regardless of the installation location. The MCP key doubles as a test and disassembly tool allowing removal of the MCP front cover without the need for additional tools.CompatibilityThe KE-DM3000 range may be used on all Kidde Excellence Series fire systems and are also compatible with legacy Aritech fire systems. They can in many cases be deployed into existing systems without CIE configuration changes.Key FeaturesReliable single action manual call point for recess or surface mountingDual tri-colour status indicators offers 180 alarm visibilityTamper resistant design with resettable or frangible elementUnobtrusive front facing test facilityStandard mounting options facilitates easy retrofitting to existing installationsBack box with rear top and bottom cable entryScreen connection terminal in the back box for electrically noisy installationsPluggable connector with link through facility for ease of installation and pre-commissioning testingAn alarm flag on the face of the manual call point allows alarm indication even without alarm LEDsFast no-tools-required maintenance using the test keyUp to 128 devices supported per loop

GBP 50.70

1

Kidde KE-DM3010US99 Intelligent Addressable Manual Call Point - Blue

Kidde KE-DM3010US99 Intelligent Addressable Manual Call Point - BlueThe KE-DM3000 Series is an intelligent range of addressable Excellence Series manual call points. The KE-DM3010US99 is a blue single action indoor MCP with an EVACUATION ALARM functional indication. It is delivered complete with resettable element test connector and test key. Multiple optional accessories are available to facilitate most indoor installation requirements.AestheticsThis single action MCP is a standard profile indoor MCP suitable for surface and recess mount installations using standard or legacy European electrical boxes. With its designer dual tricolour LEDs it offers 180 clear local indication of its operational status even from a side view in a passage installation. The clean face of the MCP is further enhanced by a front access test key facility.Installation maintenance friendlyThe front facing access for an aesthetically matching test key allows unhindered access regardless of the installation location. The MCP key doubles as a test and disassembly tool allowing removal of the MCP front cover without the need for additional tools.CompatibilityThe KE-DM3000 range may be used on all Kidde Excellence Series fire systems and are also compatible with legacy Aritech fire systems. They can in many cases be deployed into existing systems without CIE configuration changes.Key FeaturesReliable single action manual call point for recess or surface mountingDual tri-colour status indicators offers 180 alarm visibilityTamper resistant design with resettable or frangible elementUnobtrusive front facing test facilityStandard mounting options facilitates easy retrofitting to existing installationsBack box with rear top and bottom cable entryScreen connection terminal in the back box for electrically noisy installationsPluggable connector with link through facility for ease of installation and pre-commissioning testingAn alarm flag on the face of the manual call point allows alarm indication even without alarm LEDsFast no-tools-required maintenance using the test keyUp to 128 devices supported per loop

GBP 48.44

1

Testifire XTR2 TESTIFIRE-MEML-001 Membrane for USA amp Middle East Regions

Testifire XTR2 TESTIFIRE-MEML-001 Membrane for USA Middle East RegionsTestifire XTR2 is the next generation of our popular Testifire product however it is much more than just a functional test tool. Testifire XTR2 has compliance at its core its unique features enable compliant testing to be carried out and via an App and supporting cloud-portal ensure test results can be recorded automatically at the time of test giving fire service managers and building owners the ultimate proof of test.Whats in the reportThe test report is automatically generated on-site once the final detector has been tested. Its then immediately available for viewing by the relevant team members at the service company and then be sent to the client along with any other relevant documentation. The report combines all the data needed to prove testing has taken place and confirms the status of each detector automatically highlighting any areas of concern at the top of the document.Key FeaturesSpecialist membrane allowing use of Testifire XTR2 with larger detectors

GBP 45.65

1

Testifire XTR2 TESTIFIRE-WPSU-001 Wall PSU containing UK EU US AUS and NZ Adaptors

Testifire XTR2 TESTIFIRE-WPSU-001 Wall PSU containing UK EU US AUS and NZ AdaptorsTestifire XTR2 is the next generation of our popular Testifire product however it is much more than just a functional test tool. Testifire XTR2 has compliance at its core its unique features enable compliant testing to be carried out and via an App and supporting cloud-portal ensure test results can be recorded automatically at the time of test giving fire service managers and building owners the ultimate proof of test.Whats in the reportThe test report is automatically generated on-site once the final detector has been tested. Its then immediately available for viewing by the relevant team members at the service company and then be sent to the client along with any other relevant documentation. The report combines all the data needed to prove testing has taken place and confirms the status of each detector automatically highlighting any areas of concern at the top of the document.Key FeaturesWall PSU for use with the Testifire XTR2 battery packContains UK EU US AUS AND NZ Adaptors

GBP 48.91

1

Kidde DP721RT Dx700 Series Conventional Multisensor Fire Detector With Relay

Kidde DP721RT Dx700 Series Conventional Multisensor Fire Detector With RelayAll Aritech 700 series smoke detectors continuously monitor their sensitivity and operational status. Background drift is daily compensated to maintain the original calibrated sensitivity within the required limits.Once a day the detector performs a full diagnostic test that includes dynamically testing the sensing chamber and internal electronics. If a detector drifts out of sensitivity range or fails the internal diagnostics test this is reported back to the panel and indicated on the detector with a yellow fault LED.Maintenance friendly sensitivity level test modeThe 700 Series photoelectric detectors include a sensitivity test mode that may be activated by simply holding a magnet near the detectors test point. This initiates a self-diagnostic routine and provides visual indication if service is required. This test mode allows field sensitivity testing without the requirement for external meters or test gas.Field cleaning and serviceThe photoelectric sensing chamber unclips from the detector for easy field cleaning and service. During regular maintenance the detector cover can be removed the optical chamber removed and replaced by a low cost new chamber. On power up the detector auto-calibrates and returns to normal operating mode without any further intervention.The right detector for the right jobFor a truly fast and broad-spectrum detection the DP721RTA offers both optical and heat sensors. The interaction of both the smoke and heat algorithms ensure a quick response to both flaming and smouldering fires.All bases are provided with an integral locking tab for extra security if required. Bases are equipped with a shorting bar between IN and OUT that opens when the head is installed and that may be manually restored when removing the head. This simplifies cable continuity testing.Key FeaturesAutomatic self diagnostics with dynamic full detector and sensitivity testHigh false alarm immunity with floating background with drift compensationSeparate fire and fault LEDs for unambiguous alarm reportingWide operating voltage for use on most conventional systemsPolarity insensitive for carefree installationCOMNONC contacts for easy supervision on any systemManual self diagnostic with visual sensitivity indicationField exchangeable and disposable optical chamber

GBP 46.97

1

Kidde KE-DM3110R Excellence Series Intelligent Addressable Manual Call Point With Isolator

Kidde KE-DM3110R Excellence Series Intelligent Addressable Manual Call Point With IsolatorThe KE-DM3100 Series is an intelligent range of addressable Excellence Series manual call points with integrated isolation. The KE-DM3110R is a red single action indoor MCP with a House-on-Fire functional indicator. It is delivered complete with resettable element test connector and test key. Multiple optional accessories are available to facilitate most indoor installation requirements.AestheticsThis single action MCP is a standard profile indoor MCP suitable for surface and recess mount installations using standard or legacy European electrical boxes. With its designer dual tricolour LEDs it offers 180 clear local indication of its operational status even from a side view in a passage installation. The clean face of the MCP is further enhanced by a front access test key facility that allows access to the back box and cabling making additional fasting screw holes obsolete.Installation Maintenance FriendlyThe front facing access for an aesthetically matching test key allows unhindered access regardless of the installation location. The MCP key doubles as a test and disassembly tool allowing removal of the MCP front cover without the need for additional tools.CompatibilityThe KE-DM3000 range may be used on all Kidde Excellence Series fire systems and are also compatible with legacy Aritech fire systems. They can in many cases be deployed into existing systems without CIE configuration changes.Key FeaturesReliable single action manual call point for recess or surface mountingIntegrated short circuit isolation for added safetyDual tri-colour status indicators offers 180 alarm visibilityTamper resistant design with resettable or frangible elementUnobtrusive front facing test facilityStandard mounting options facilitates easy retrofitting to existing installationsBack box with rear top and bottom cable entryScreen connection terminal in the back box for electrically noisy installationsPluggable connector with link through facility for ease of installation and pre-commissioning testingAn alarm flag on the face of the manual call point allows alarm indication even without alarm LEDsFast no-tools-required maintenance using the test keyUp to 128 devices supported per loop

GBP 49.54

1

Ziton Double-Pole Green Surface Call Point with Glass DMN702G

Ziton Double-Pole Green Surface Call Point with Glass DMN702GThe DMN702G is a green manual call point for surface mount applications. It offers double pole changeover contacts with common normally open and normally closed connections. It is supplied with a EN54 breakable glass and test key.Key FeaturesEnhanced aestheticsEasy to install plug and playSurface mount optionsProtection hinged cover with Anti-Tamper facilityBackward compatibleKey test facilityMay be used with glass or resettable elementEasy to replace glassHigh quality micro switch

GBP 51.77

1

Solo Spare 1028 Aerosol Retaining Cup For Solo 330332 Dispenser

Solo Spare 1028 Aerosol Retaining Cup For Solo 330332 DispenserThe Solo Spare 1028 is a replacement Aerosol Retaining Cup which has been designed for use with the 330332 Smoke and CO Detector Test Dispenser.

GBP 52.13

1

Brand

Merchant

Price (EUR)