114 results (0,13092 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

C-Tec BF430CEASR EA Wall Sounder Self-Testing Red

C-Tec BF430CEASR EA Wall Sounder Self-Testing Red

C-Tec BF430CEASR EA Wall Sounder Self-Testing RedA self-testing wall sounder designed for use with C-TECs CAST-powered EVAC-ALERT evacuation alert system.Key FeaturesDesigned for use on a C-TEC CAST-powered EVAC-ALERT systemSelf-testing functionality means access to a flat is only required when a fault is detectedEmits a clear concise and recognisable evacuation alarm toneImpressive 100dBA sound output at 1mLow 5.5mA alarm currentIP21C ratedComplies with EN54-3Reliable hard-wired technology

GBP 74.59
1

C-Tec BF430CEASW EA Wall Sounder - Self Testing - White

C-Tec BF430CEASW EA Wall Sounder - Self Testing - White

C-Tec BF430CEASW EA Wall Sounder - Self Testing - WhiteThe BF430CEASW is a new EN54-3 compliant evacuation alert system from C-TEC specifically designed to assist the fire rescue services FRS in evacuating high-rise residential buildings. The device offers low current consumption emitting a clear concise and recognisable evacuation alarm tone.Details Designed for use on a C-TEC CAST-powered EVAC-ALERT system Self-testing functionality means access to a flat is only required when a fault is detected Emits a clear concise and recognisable evacuation alarm tone Impressive 100dBA sound output at 1m Low 5.5mA alarm current IP21C rated. Complies with EN54-3 Red version also available order code BF430CEASR

GBP 74.59
1

Ringtail X-CS3M LED Maintained Self-Testing Bulkhead IP65

Ringtail X-CS3M LED Maintained Self-Testing Bulkhead IP65

Ringtail X-CS3M LED Maintained Self-Testing Bulkhead IP65The X-CS3M light is a high light output emergency bulkhead with the added benefit of utilising LEDs and a self-test facility. This LED bulkhead is a self-test emergency luminaire suitable for internal and external environments. It uses 6 high output LEDs with a moulded self-extinguishing polycarbonate base and fitted with a fresnel diffuser suitable for use on escape routes 850 degrees C Hot-wire test defined by ICEL.The diffuser is screw fixed and sealed by gasket to the base to provide IP65 protection. The gear tray is hinged and fully removable and cable entries are provided in the ends and base. This bulkhead can be fitted with a universal legend kit part no. ULK making it suitable for use as exit signs.Key FeaturesIP65PolycarbonateABS ConstructionClear Fresnel DiffuserRemovable Hinged Gear TrayExit SignsSelf-Test6 LEDsInternal External

GBP 55.91
1

Fireclass 516.016.028FC LHD Junction EOL Box

Fireclass 516.016.028FC LHD Junction EOL Box

Fireclass 516.016.028FC LHD Junction EOL BoxThe ProReact Digital End-of-Line Unit is designed to effectively terminate up-to two zones of ProReact EN Digital LHD cable in a secure weatherproof enclosure.Furthermore the built-in switches for testing a fault and alarm condition allow the integrity of the whole system to be functionally checked in situ providing comprehensive testing and maintenance of the system.Typical ApplicationsCar parksOil and gas tank farmsMinesCable traysCold storageConveyor beltsKey FeaturesWeatherproof enclosureBuilt-in switchesThe first digital linear heat detection system to be certified to EN54-282016Improved testing and maintenance functionalityManufactured in the UK

GBP 73.60
1

Fireclass 516.016.175FC ProReact EN Digital End of Line

Fireclass 516.016.175FC ProReact EN Digital End of Line

Fireclass 516.016.175FC ProReact EN Digital End of LineThermocables ProReact Digital End-of-line Unit with test facility has also been certified to EN54-282016 and enables users to undertake hassle-free functional testing of the system. Users can verify normal conditions trouble and alarm functions of a system by simulating a break in the cable or overheat condition.Key FeaturesThe first digital linear heat detection system to be certified to EN54-282016Improved testing and maintenance functionalityManufactured in the UK

GBP 73.60
1

Ringtail X-MRD3NMP LED Non-Maintained Recessed Spotlight

Ringtail X-MRD3NMP LED Non-Maintained Recessed Spotlight

Ringtail X-MRD3NMP LED Non-Maintained Recessed SpotlightThis innovative self-contained LED emergency Downlighterfeatures a single point high illumination white LED with an optical lens foreither corridor open area or flood. Suitable for modern buildings where highperformance and a minimum maintenance cost are essential.Key FeaturesHigh lumen outputLow power consumption3 optic options standard open area or corridorIP54 Recess mounting open area corridorDALI and Self-Testing options0C 25C operating temperature3W High Output 160mm ceiling void 43mmcutout

GBP 74.29
1

Testifire XTR2 TESTIFIRE-MEML-001 Membrane for USA amp Middle East Regions

Testifire XTR2 TESTIFIRE-MEML-001 Membrane for USA amp Middle East Regions

Testifire XTR2 TESTIFIRE-MEML-001 Membrane for USA Middle East RegionsTestifire XTR2 is the next generation of our popular Testifire product however it is much more than just a functional test tool. Testifire XTR2 has compliance at its core its unique features enable compliant testing to be carried out and via an App and supporting cloud-portal ensure test results can be recorded automatically at the time of test giving fire service managers and building owners the ultimate proof of test.Whats in the reportThe test report is automatically generated on-site once the final detector has been tested. Its then immediately available for viewing by the relevant team members at the service company and then be sent to the client along with any other relevant documentation. The report combines all the data needed to prove testing has taken place and confirms the status of each detector automatically highlighting any areas of concern at the top of the document.Key FeaturesSpecialist membrane allowing use of Testifire XTR2 with larger detectors

GBP 45.65
1

Testifire XTR2 TESTIFIRE-WPSU-001 Wall PSU containing UK EU US AUS and NZ Adaptors

Testifire XTR2 TESTIFIRE-WPSU-001 Wall PSU containing UK EU US AUS and NZ Adaptors

Testifire XTR2 TESTIFIRE-WPSU-001 Wall PSU containing UK EU US AUS and NZ AdaptorsTestifire XTR2 is the next generation of our popular Testifire product however it is much more than just a functional test tool. Testifire XTR2 has compliance at its core its unique features enable compliant testing to be carried out and via an App and supporting cloud-portal ensure test results can be recorded automatically at the time of test giving fire service managers and building owners the ultimate proof of test.Whats in the reportThe test report is automatically generated on-site once the final detector has been tested. Its then immediately available for viewing by the relevant team members at the service company and then be sent to the client along with any other relevant documentation. The report combines all the data needed to prove testing has taken place and confirms the status of each detector automatically highlighting any areas of concern at the top of the document.Key FeaturesWall PSU for use with the Testifire XTR2 battery packContains UK EU US AUS AND NZ Adaptors

GBP 48.91
1

C-Tec BF446ACXDRLD CX Wall Voice Sounder Deep Base Red Lockdown

C-Tec BF446ACXDRLD CX Wall Voice Sounder Deep Base Red Lockdown

C-Tec BF446ACXDRLD CX Wall Voice Sounder Deep Base RedLockdownThe Hi-Output range of addressable loop-powered devicesinclude voice sounders and combined voice sounder VADs. Their purpose is tovisually and audibly alert building occupants of a fire alarm. They aredesigned for use with C-TECs ZFP and XFP Apollo Discovery panels and otherthird-party Apollo Discovery panels. However compatibility testing withthird-party panels is recommended to ensure correct operation.Please note this image is for illustrativepurposes only

GBP 76.22
1

Apollo SA5100-710APO Soteria Multi-Sensor Detector Dual OpticalHeat

Apollo SA5100-710APO Soteria Multi-Sensor Detector Dual OpticalHeat

Apollo SA5100-710APO Soteria Multi-Sensor Detector Dual OpticalHeatThe Apollo SA5100-710APO Soteria Multi-Sensor Detector Dual OpticalHeat uses advanced dual optical sensing technology to accurately detect smoke particles entering the chamber and a central heat thermistor for detecting heat. It has five different operating modes giving you the option to adapt the detector to suits it environment.Key Features of the SA5100-710APOAvailable with integrated switchable isolatorDrift compensationTricoloured LED status indicatorFasTest for quicker testing of detectorsLocking mechanism grub screwDIL Switch Addressing

GBP 48.30
1

Fireclass 516.016.018FC ProReact Analogue End Of Line Unit

Fireclass 516.016.018FC ProReact Analogue End Of Line Unit

Fireclass 516.016.018FC ProReact Analogue End Of Line UnitProReact EN Analogue End-of-line Unit is compulsory in all ProReact EN Analogue LHD systems as it has a key role in the operation of the technology allowing the control unit to detect a short circuit or open circuit in the sensor cable. It is small in size and is straightforward to be mounted on surfaces.Thermocables ProReact Digital End-of-line Unit with test facility has also been certified to EN54-282016 and enables users to undertake hassle-free functional testing of the system. Users can verify normal conditions trouble and alarm functions of a system by simulating a break in the cable or overheat condition.The ProReact technology offers an alternative solution to heat protection in a wide range of applications and industries from power generation to oil and gas. It is a cost-effective resettable and can be used in applications that are less suited to other types of fire detectors. The ProReact EN Analogue LHD system has a wide range of available alarm temperatures to suit different environments.Key FeaturesFor use with the ProReact Analogue ControllerSmall sizeImproved testing and maintenance functionalityManufactured in the UK

GBP 61.33
1

Aritech DMN960Y 990 Series Manual Call Point - Complete with Back Box and Resettable Element Yellow

Aritech DMN960Y 990 Series Manual Call Point - Complete with Back Box and Resettable Element Yellow

Aritech DMN960Y 990 Series Manual Call Point - Complete with Back Box and Resettable Element YellowThe DMN960Y is a surface mount YELLOW addressable 990 Series manual call point with a high strength plastic housing. The LED indicator provides visual confirmation of alarm initiation. The test key included with each unit facilitates functional testing of the call point. The manual call point is delivered complete with resettable element.Operating PrinciplesThe address of each call point is set at the commissioning stage by means of a seven-segment DIL switch. The device features plug and play terminal connections. A single alarm LED is provided on the call point and is controlled independently of the call point by the fire panel.AccessoriesIt is possible to surface or flush mount any of the call points in the range. Optional accessories to accommodate this are available separately.ApprovalsAll relevant manual call points in the range have been tested by LPC and approved by LPCB and a number of other approval authorities.Key FeaturesAddressable manual call pointLED alarm indicatorTamper resistant break glass designEasy to test with self-resetFast responsePlug and play terminal connections for fast wiringAllow wiring continuity testing before fittingResettable element fitted

GBP 70.24
1

Apollo SA5100-760APO Soteria Multi-Sensor Detector OpticalHeat

Apollo SA5100-760APO Soteria Multi-Sensor Detector OpticalHeat

Apollo SA5100-760APO Soteria Multi-Sensor DetectorOpticalHeatThe Soteria Multi-Sensor Detector uses advanced opticalsensing technology PureLight to detect smoke particles entering the chamberand is fitted with two thermistors for detecting heat. It easily discriminatesagainst false alarm stimuli and is a great environmentally friendly alternativeto ionisation detectors.Key FeaturesFive modes of operation for ultimate fire detection andfalse alarm management in a wide range of applicationsUtilises digital Core Protocol communications providing arange of advanced fire detection featuresA sophisticated dynamic algorithm providing transientrejection and compensation for drift while maintaining accurate sensitivityFasTest for quicker testing of detectorsIntegrated switchable isolator

GBP 56.16
1

C-Tec BF459ACXW CX O Class Base - VAD - White

C-Tec BF459ACXW CX O Class Base - VAD - White

C-Tec BF459ACXW CX O Class Base - VAD - WhiteThe Base Mount range of addressable loop-powered basesincludes voice sounders and combined voice sounder visual alarm devices VADs.Their purpose is to visually and audibly alert building occupants of a firealarm. They are designed for use with C-TECs ZFPXFP Apollo Discovery protocolpanels and other third-party Apollo Discovery protocol panels. Howevercompatibility testing with third-party panels is recommended to ensure correctoperation.The bases offer low current consumption highsound output high efficiency VADs seven selectable volume levels 15 selectabletone pairs and built-in short-circuit loop isolators.

GBP 50.47
1

Cranford Controls 511-148 Sounder Beacons MED amp ABS Approved - Red - White LED - 24VDC Deep

Cranford Controls 511-148 Sounder Beacons MED amp ABS Approved - Red - White LED - 24VDC Deep

Cranford Controls 511-148 Sounder Beacons MED ABS Approved - Red - White LED - 24VDC DeepThe VTB EN54-3 approved sounderbeacon has undergone additional development to meet the needs of the harsh environments in marine applications.Marine variants come with 32 sounder tones that include the most common sound patterns and two marine specific tones.Key FeaturesProducts have undergone additional EMC vibration and salt mist testing for use in the maritime industryOne device with approved sounder function and energy efficient visual indicationSelectable sounder tones include Marine General Alarm and the International Marine Organisation Code 2 Continuous signals

GBP 49.62
1

Baldwin Boxall Green DRS Overide Switch Apply Label at BBC BVCRBG

Baldwin Boxall Green DRS Overide Switch Apply Label at BBC BVCRBG

Baldwin Boxall Green DRS Overide Switch Apply Label at BBC BVCRBGDISABLED REFUGE BREAK GLASS UNITDisabled refuge units have the option to be triggered by the fire alarm panel so that the units become active during an emergency. Fire telephones emergency telephones and toilet alarms are constantly active.This prevents accidental or deliberate misuse as the remote units remain dormant until activated.In order to activate the system for non-emergency use it is necessary to override the fire panel. This is achieved by connecting a break glass unit BVCRBG to the master control panel.Enables weekly testing and routine maintenance - as set out in BS5839-92011.

GBP 69.85
1

Elmdene EN3-JB26 Junction Box - 24 Terminals Plus Micro Switch Tamper White Pack of 10

Elmdene EN3-JB26 Junction Box - 24 Terminals Plus Micro Switch Tamper White Pack of 10

Elmdene EN3-JB26 Junction Box - 24 Terminals Plus Micro Switch Tamper White Pack of 10The EN range of Junction Boxes feature a high reliability spring action micro switch for the lid tamper so now your engineers can confidently connect the tamper when using a junction box maintaining the security and integrity of the system and indeed the reputation of your company. The Junction Boxes are designed to meet PD66622004 A1 A2 BS EN 50131-12006 and the environmental testing requirements of EN 50131-2- 22008 Class II or III as indicated.Key FeaturesDimensions 125L x 100w x 45dColour White

GBP 60.14
1

C-Tec BF457ACXWLD CX C Class Base Voice Sounder - White Lockdown

C-Tec BF457ACXWLD CX C Class Base Voice Sounder - White Lockdown

C-Tec BF457ACXWLD CX C Class Base Voice Sounder - White LockdownThe Base Mount range of addressable loop-powered basesincludes voice sounders and combined voice sounder visual alarm devices VADs.Their purpose is to visually and audibly alert building occupants of a firealarm. They are designed for use with C-TECs ZFPXFP Apollo Discovery protocolpanels and other third-party Apollo Discovery protocol panels. Howevercompatibility testing with third-party panels is recommended to ensure correctoperation.The bases offer low current consumption highsound output high efficiency VADs seven selectable volume levels 15 selectabletone pairs and built-in short-circuit loop isolators.Please note this image is for illustrative purposes only

GBP 64.69
1

Aritech DMN990I 990 Series Manual Call Point w Isolator - Complete w Back Box and Glass Red

Aritech DMN990I 990 Series Manual Call Point w Isolator - Complete w Back Box and Glass Red

Aritech DMN990I 990 Series Manual Call Point with Isolator - Complete w Back Box and Glass RedThe DMN990I is a surface mount RED addressable 990 Series manual call point with a high strength plastic housing. The dual LED indicator provides visual confirmation of alarm initiation as well as isolator status when the built-in short circuit isolator is activated. The test key included with each unit facilitates functional testing of the call point. The manual call point is delivered complete with glass but a resettable element can be installed as an option at any time.Operating PrinciplesThe address of each call point is set at the commissioning stage by means of a seven-segment DIL switch. The device features plug and play terminal connections. A single alarm LED is provided on the call point and is controlled independently of the call point by the fire panel.AccessoriesIt is possible to surface or flush mount any of the call points in the line. Accessories to accommodate this are available separately.ApprovalsAll manual call points in the range have been tested by LPC and approved by LPCB and a number of other approval authorities.EN54-11 and EN54-17 approvedCE and CPD certifiedKey FeaturesAddressable manual call pointLED alarmisolation indicatorTamper resistant break glass designEasy to test with self-resetFast responseIP67 waterproof model availablePlug and play terminal connections for fast wiringAllow wiring continuity testing before fittingBuilt in short circuit isolatorResettable element optionApollo equivalent 58200-908

GBP 51.74
1

Cranford Control 511-156 Sounder Beacons MED amp ABS Approved - White - Blue LED - 24VDC - Deep - Outdoors amp Indoors

Cranford Control 511-156 Sounder Beacons MED amp ABS Approved - White - Blue LED - 24VDC - Deep - Outdoors amp Indoors

Cranford Control 511-156 Sounder Beacons MED ABS Approved - White - Blue LED - 24VDC - Deep - Outdoors IndoorsIntroducing the Cranford Controls Marine Wall Sounder Flashing LED Beacon - Deep Base - White Body Blue Lens - 511-156.Our VTB EN54-3-approved sounderbeacon has been meticulously engineered to cater to the demanding conditions of marine environments. Building on its reliable performance we have further enhanced its capabilities to meet the unique requirements of marine applications.Equipped with 32 sounder tones including commonly used patterns and two specialized marine tones the 511-156 ensures effective signalling in any situation. The added marine-specific tones are designed to enhance safety and communication in maritime settings.To complement your specific needs we offer a choice between white or red body colour options and a range of lens colours to suit different applications.Choose the Cranford Controls Marine Wall Sounder Flashing LED Beacon - Deep Base - 511-156 and experience top-notch reliability and performance in marine signalling.Product FeaturesApproved to Marine Equipment Directive 201490EU Inc. IEC 60092-504 IEC 60533 EN 54-3EMC testing to IEC 60533-Electrical and electronic installations in shipsEnvironmental testing to IEC 60092-504-Installations in ships Controls and instrumentation32 Selectable tonesIndustry-specific Marine General Alarm tone and IMO Code 2 Continuous signalAlert to evacuation changeover via the third wireProtection rating BS EN 60529 Deep-based variants IP65Designed to work with Marine-approved fire alarm systemsTwist and lock bayonet mounting systemLens colour options-Red Amber Clear Blue and GreenABS Fire retardant plastic

GBP 49.62
1

Apollo SA5100-810APO Soteria Tri-Sensor Detector Dual OpticalHeatCO

Apollo SA5100-810APO Soteria Tri-Sensor Detector Dual OpticalHeatCO

Apollo SA5100-810APO Soteria Tri-Sensor Detector Dual OpticalHeatCOThe Soteria Tri-Sensor Detector Dual OpticalHeatCO uses advanced dual optical sensing technology to accurately detect smoke particles and discriminate against false alarm stimuli. It has a centrally located heat thermistor along with a CO sensor giving you three methods of detection.The detector can operate in 5 modes of sensitivity.Soteria detectors have been designed to operate on Discovery loops. This allows for Soteria detectors and bases to operate on existing systems and for Soteria detectors to operate on Discovery bases XPERT 7 Intelligent Mounting Base.Key FeaturesAvailable with integrated switchable isolatorDrift compensationTricoloured LED status indicatorFasTest for quicker testing of detectorsLocking mechanism grub screwDIL Switch Addressing

GBP 67.08
1

Apollo SA5500-351APO Open-Area Sounder VID Red Body Red Flash

Apollo SA5500-351APO Open-Area Sounder VID Red Body Red Flash

Apollo SA5500-351APO Open-Area Sounder VID Red Body Red FlashThe Intelligent Open-Area Sounder VID is designed for use inopen-areas and can be connected to any CoreProtocol Discovery or XP95 system.The Intelligent Open-Area Sounder VID includes features suchas group global and individual control status reporting and selectable toneand volume settings all configured through the fire control panel.AddressingThe Intelligent Open-Area VID responds to its own individualaddress which is set with the appropriate XPERT address card. Group address onCoreProtocol systems are set using the fire control panel.Key FeaturesAdjustable tone and volume 15 tone pairs seven volumelevelsSoftware defined group addressing with up to 16 groupaddressesBuilt-in controllable isolatorIndependent control of sounder and visual indicatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 71.24
1

Morley M5A-RP06FF-K013-01 Addressable Flexible Manual Call Point with Isolator

Morley M5A-RP06FF-K013-01 Addressable Flexible Manual Call Point with Isolator

Morley M5A-RP06FF-K013-01 Addressable Flexible Manual Call Point with IsolatorThe MI-MCP Series Manual Call Points are designed to provide a manual alarm interface to Morley IASs fire alarm control panel. Installation efficiency flexibility and compliance with the latest standards are at the heart of the call point range.The unique plug and play concept is designed specifically to reduce installation time by using a terminal block which can be wired during the initial installation cabling with a link to provide continuity for testing. During the commissioning phase the links are removed and the terminal block is simply inserted into the connector at the back of the unit.Key FeaturesUnique Plug Play installation conceptRe-settable operating element optionAnalogue addressable communicationsFully compliant with EN54 Part 11Backward compatibilityEnhanced aestheticsIntegral LEDIntegral loop isolation option

GBP 59.90
1