ProfitSpring | B2B PPC Agency

Kentec DNA-R-2FFC-K Intelligent Active RS485Fibre amp Dual Fibre Dynamic Network Analyser

Kentec DNA-R-2FFC-K Intelligent Active RS485Fibre Dual Fibre Dynamic Network AnalyserAn intelligent activeRS485Fibre Dual Fibre Dynamic Network Analyser.

GBP 1569.97

1

C-Tec Adaptor Box to Convert Fire-rated Cable to Cat 5 CATCON

C-Tec Adaptor Box to Convert Fire-rated Cable to Cat 5 CATCONA Fire-Rated Cable to Cat 5 Conversion Adapter Box.

GBP 68.56

1

Apollo 29600-664 Conventional Open-Area Sounder VAD Cat. W - Outdoor - Red Body Red Flash

Apollo 29600-664 Conventional Open-Area Sounder VAD Cat. W - Outdoor - Red Body Red FlashThe Conventional Open-Area Wall Sounder VAD is used to provide audible and visual warning of a fire. Combining an EN 54-3 compliant sounder with an EN 54-23 compliant VAD enables this device to be used in areas that require the use of both an audible and a visual alarm.Key FeaturesFor use outdoorsRed body with red flashConventional

GBP 176.29

1

Haes WRL-RC-I00 WMST EN54-23 W-Cat Red Flash Red Body Strobe

Haes WRL-RC-I00 WMST EN54-23 W-Cat Red Flash Red Body StrobeW Class wall mount approved - this strobe would fit yourneed perfectly coming with red and white body colour options and white or redflash colour to suit your environment.Approved to EN54-23 EN54-17 it enables a completefully compliant and cost-effective fire alarm system by reducing installation andcommissioning costs through fewer wiring points.This solution enables easy system extensions in legacy andnew projects thereby providing the highest level of protection for allbuilding occupants from a trusted brand.Key FeaturesRed flashRed body

GBP 117.55

1

Haes WRA-RC-I00 WMSS EN54-23 W-Cat Red Flash Red Body Strobe

Haes WRA-RC-I00 WMSS EN54-23 W-Cat Red Flash Red Body StrobeW Class wall mount approved - this strobe would fit yourneed perfectly coming with red and white body colour options and white or redflash colour to suit your environment.Approved to EN54-23 EN54-17 it enables a completefully compliant and cost-effective fire alarm system by reducing installation andcommissioning costs through fewer wiring points.This solution enables easy system extensions in legacy andnew projects thereby providing the highest level of protection for allbuilding occupants from a trusted brand.Key FeaturesRed flashRed body

GBP 166.76

1

Apollo 55000-739APO XP95 Open-Area VAD Cat. C - White Body Red Flash C-3-8

Apollo 55000-739APO XP95 Open-Area VAD Cat. C - White Body Red Flash C-3-8The XP95 Open-Area Visual Alarm Devices VADs have been developed as primary or supplementary alarm devices. The loop powered VAD may be used in situations where there is a risk that sounders will not be heard. It might also be required where deaf or hearing impaired persons may be present.Key FeaturesHigh intensity red LEDsEN 54-23 compliant Category C VADCoverage C-3-8Flash Rate 0.5 HzFault signal if LED checked

GBP 45.24

1

Apollo Cat O. XP95 VAD Base with Isolator 45681-709APO

Apollo Cat O. XP95 VAD Base with Isolator 45681-709APOThe XP95 range of analogue addressable fire detectors uses tried and trusted technology to give the best performance and has unique features that benefit the installer and the end user. It is suitable for medium-to-large applications with simple installation requirements. As it operates using digital communication XP95 has a high immunity from corruption and is therefore often preferred in a large system where life safety is critical. XP95 products are frequently used in commercial industrial financial government ITtelecoms and healthcare applications.The XP95 VAD Base is a loop-powered VAD combined with a standard intelligent mounting base. It is used to signal a fire alarm in enclosed areas. The VAD base can be used with either a detector fitted or with a cap as a stand-alone device.Key FeaturesEN54-23 approvedFlash rate of 0.5HzSynchronisation of VAD flashIndividual and group addressingUnique VAD self-testLoop-poweredBuilt in isolator

GBP 58.67

1

Apollo Cat O. XP95 Sounder VAD Base with Isolator 45681-705APO

Apollo Cat O. XP95 Sounder VAD Base with Isolator 45681-705APOThe XP95 Sounder VAD Base is a loop-powered sounder and EN 54-23 approved VAD combined with a standard intelligent mounting base. It is used to signal a fire alarm in enclosed areas.You can perform a Self Test this is an important safety feature which has been incorporated into the Sounder VAD Bases when it is switched on it tests itself by checking the actual sound output and flash operation.There are 3 possible outcomes from the test if the transmitter readsA value of 1 Sounder fault this means there was no sound detected in 5 seconds of the sounder being switched on.A value of 2 VAD fault means there is no current being drawn by the LEDs.A value of 3 Sounder and VAD fault where neither of the above elements are operating correctly.If no sound is detected within 5 seconds of the Sounder VAD Bases being switched on it will transmit an analogue value of 1 sounder fault when it is next polled.This feature can also be used during commissioning or periodical maintenance testing. Simply activate the Sounder VAD for at least 5 seconds and check the control panel for a fault signal. If none is received the Sounder VAD Base is working properly.Key FeaturesEN54-23 approvedFlash rate of 0.5HzSynchronisation of alert and evacuate tonesSynchronisation of visual indicator flashIndividual and group addressingUnique acoustic and VAD self-testBuilt in isolator

GBP 72.02

1

Apollo RW1500-210APO Reach Open-Area Sounder VAD Cat. W White Body White-Flash W-2.5-7

Apollo RW1500-210APO Reach Open-Area Sounder VAD Cat. W White Body White-Flash W-2.5-7The RW1500-210APO is a wireless analogue addressable interface and a conventional open-area sounder VAD that can be used as a stand-alone notification device.The REACH Wireless Open-Area Wall Sounder VAD Base includes a 360 LED indicator which to indicate status conditions.REACH Wireless devices are supplied with two CR123 batteries battery A and B. The device switches periodically between the two batteries on a controlled sequence. For correct operation of the device both batteries are required with adequate capacity reserves.The REACH range is designed to solve challenging installation scenarios for structures with restricted or complex access and installation conditions such as listed buildings out-buildings temporary structures where wired installation or long site downtime is not possible.Key FeaturesCompatible only with REACH Wireless16 tone pairsFour Volume SettingsBi-directional wireless communicationDual channel redundancyFive year battery lifeFive year product warranty

GBP 260.92

1

Apollo RW1500-220APO Reach Open-Area Sounder VAD Cat. W Red Body White Flash W-2.5-7

Apollo RW1500-220APO Reach Open-Area Sounder VAD Cat. W Red Body White Flash W-2.5-7The RW1500-220APO is a wireless analogue addressable interface and a conventional open-area sounder VAD that can be used as a stand-alone notification device.The REACH Wireless Open-Area Wall Sounder VAD Base includes a 360 LED indicator which to indicate status conditions.REACH Wireless devices are supplied with two CR123 batteries battery A and B. The device switches periodically between the two batteries on a controlled sequence. For correct operation of the device both batteries are required with adequate capacity reserves.The REACH range is designed to solve challenging installation scenarios for structures with restricted or complex access and installation conditions such as listed buildings out-buildings temporary structures where wired installation or long site downtime is not possible.Key FeaturesCompatible only with REACH Wireless16 tone pairsFour Volume SettingsBi-directional wireless communicationDual channel redundancyFive year battery lifeFive year product warranty

GBP 260.92

1

Apollo Discovery Cat O. Discovery Sounder VAD Base with Isolator 45681-700APO

Apollo Discovery Cat O. Discovery Sounder VAD Base with Isolator 45681-700APOThe Discovery Sounder VAD Base makes full use of the Discovery protocol. For ease of commissioning a Magnetic Wand can be used to test and adjust each sounder VAD locally.Key FeaturesEN54-23 certifiedFlash rate of 0.5HzIt is possible to set individual volume of the sounder from the panel15 pairs of tones including IMO code 1A General Emergency Alarm and IMO Code 2 All ClearBuilt in isolatorBrand InformationDiscovery is a range of high-specification analogue addressable fire detectors and alarm devices. Discovery detectors offer effective false alarm management by a combination of EN 54 approved operating modes and sophisticated algorithms. Drift compensation further reduces the likelihood of false alarms caused by a build-up of dust in the sensing chamber. In addition to the familiar smoke and heat detectors the Discovery range features two multisensor detectors. One is an opticalheat multisensor which can be used to protect against many types of fire risk. The other is a carbon monoxideheat multisensor which protects against both smouldering fires and those generating heat.OperationThe Discovery Multisensor construction is similar to that of the optical detector but uses a different lid and optical mouldings to accommodate the thermistor heat sensor. The Discovery OpticalHeat Multisensor Detector contains an optical smoke sensor and a thermistor temperature sensor whose outputs are combined to give the final analogue value. The way in which the signals from the two sensors are combined depends on the response mode selected.The five modes provide response behaviour which incorporates pure heat detection pure smoke detection and a combination of both. The multisensor is therefore useful over the widest range of applications. The signals from the optical smoke sensing element and the temperature sensor are independent and represent the smoke level and the air temperature respectively in the vicinity of the detector.The detectors micro-controller processes the two signals according to the mode selected. When the detector is operating as a multisensor the temperature signal processing extracts only rate-of-rise information for combination with the optical signal. In these modes the detector will not respond to a slow temperature increase even if the temperature reaches a high level. A large sudden change in temperature can however cause an alarm without the presence of smoke if sustained for 20 seconds.

GBP 78.12

1

C-Tec BF391 Isolated Failsafe Monitor Unit

C-Tec BF391 Isolated Failsafe Monitor UnitAllows IO devices that may not be compatible with the PSUfailure requirements of BS 7273-4 Cat A to comply.Is supplied on a single gang plate with an onboard isolatingEnd of Line Unit EOL and normally energised 24V 3A rated relay.Provides failsafe operation per BS 7273-4 Cat A B Crequirements for all compatible IO units.Provides failsafe operation per BS 7273-4 Cat A B Crequirements for multiple coincidental loop failures sometimes required in aspecification above and beyond the requirements of BS 7273-4 for allcompatible IO units.Key FeaturesAccommodates IO units sited inside or outside the 24V Auxenclosure IO units sited remotely require a BF390 EOL unit to maintain thefailsafe functionProvides complete galvanic isolation between the fire alarmsystem and the door release systemProvides where allowed failsafe manual door releasemonitoring to BS 7273-4 Cat A utilising a single TE cable for multiplemanual operating points such as free swing doors

GBP 26.46

1

Nittan EV-PYH-SCI Photoelectric Optical amp Heat Cat P Multi-Sensor With Short Circuit Isolator

Nittan EV-PYH-SCI Photoelectric Optical Heat Cat PMulti-Sensor With Short Circuit IsolatorEV-PYH-SCI is an Optical Smoke Heat Category PMulti-sensor Detector with integral Short Circuit Isolator fully compatiblewith Evolution analogue addressable systems.The EV-PYH-SCI comes to the market with some exciting newtechnological advances centred on an enhanced new PY smoke sensing chamber.The sensor includes a spherical feature within the smoke chamber providingunrivalled performance for scattering light plus an Orange LED whichsignificantly improves response across the fire spectrum. The Chamberconstruction is designed to minimise the effect of dirtdust contamination witha fine micromesh made of stainless steel to prevent ingress of even thesmallest insects which can create false alarms.This advanced Multi Sensor is able to combine the benefitsof both optical and heat sensing technologies making it less prone to falsealarms than individual sensing devices. An innovative Nittan designed algorithmreads both signals simultaneously and generates alarm signals from either orboth sensors. The Heat sensor is Category P meaning it can be configured aseither A1R A2S BS or CS heat category.The integral Short Circuit Isolator is bi-directional and inthe event of an external fault will shut down on one side to protect thesystem whilst allowing the device to continue communication with the firealarm control panel from the opposite side. The isolator will self-reset whenthe fault is cleared.The Nittan UB-6-SL-EV Base includes a sliding link toprovide loop continuity when detectors are removed. This is to ensure CallPoint operation is not affected by detector removal in accordance with BS5839-1 Clause 12.2.2.Key FeaturesOrange Optic LED and PY Type Chamber5 Sensitivity SettingsHeat Category P A1RA2SBSCSIntegral -ve Short Circuit IsolatorDrift compensationEvolution FSK protocolEEPROM Addressed with programmer

GBP 35.88

1

Vesda Sensepoint XCL XCL-VEA-CH4-RM Methane CH4 0-100 LEL Modbus amp Relays

Vesda Sensepoint XCL XCL-VEA-CH4-RM Methane CH4 0-100 LEL Modbus RelaysXtralis has developed with its sister company Honeywell Analytics a new concept of aspirated gas detectors. When used with the VESDA-E VEA VESDA Sensepoint XCL provides early warning of the presence of gases for occupant protection and system monitoring whilst at the same time ensuring protection against fire threats.Through its embedded Bluetooth interface VESDA Sensepoint XCL enables customers to pair the gas detector with their smart device applications to perform installation commissioning and maintenance. This ensures a faster VESDA Sensepoint XCL installation rapid configuration simplicity to operate and simplified maintenance.Key FeaturesAvailable SensorsCarbon Monoxide CO 0 1000ppmCombustible CAT 0 100 LEL Methane Hydrogen Propane Ethanol Butane Octane etc.Hydrogen H2 0 1000ppmCarbon Dioxide CO2 0 5.0 vvCarbon Dioxide CO2 0 5000ppmFactory calibrated detectors CAT Factory calibrated to CH4Integral alarm status LEDsBluetooth 4.0 Bluetooth Low EnergyIntegrates with PLCsHVACBMSFACPConfigurable relays4-20 mA analogue outputs or RS 485 Modbus output

GBP 1507.57

1

Vesda Sensepoint XCL XCL-VEA-CH4-RA-5 Methane CH4 0-100 LEL 4-20mA Relays - Pack of 5

Vesda Sensepoint XCL XCL-VEA-CH4-RA-5 Methane CH4 0-100 LEL 4-20mA Relays - Pack of 5Xtralis has developed with its sister company Honeywell Analytics a new concept of aspirated gas detectors. When used with the VESDA-E VEA VESDA Sensepoint XCL provides early warning of the presence of gases for occupant protection and system monitoring whilst at the same time ensuring protection against fire threats.Through its embedded Bluetooth interface VESDA Sensepoint XCL enables customers to pair the gas detector with their smart device applications to perform installation commissioning and maintenance. This ensures a faster VESDA Sensepoint XCL installation rapid configuration simplicity to operate and simplified maintenance.Key FeaturesAvailable SensorsCarbon Dioxide CO2 0 5000ppmCarbon Dioxide CO2 0 5.0 vvHydrogen H2 0 1000ppmCombustible CAT 0 100 LEL Methane Hydrogen Propane Ethanol Butane Octane etc.Carbon Monoxide CO 0 1000ppmFactory calibrated detectors CAT Factory calibrated to CH4Integral alarm status LEDsBluetooth 4.0 Bluetooth Low EnergyIntegrates with PLCsHVACBMSFACPConfigurable relays4-20 mA analogue outputs or RS 485 Modbus output

GBP 4634.11

1

Vesda Sensepoint XCL XCL-VEA-CO-RA-5 Carbon Monoxide CO 0-300PPM 4-20mA Relays - Pack of 5

Vesda Sensepoint XCL XCL-VEA-CO-RA-5 Carbon Monoxide CO 0-300PPM 4-20mA Relays - Pack of 5Xtralis has developed with its sister company Honeywell Analytics a new concept of aspirated gas detectors. When used with the VESDA-E VEA VESDA Sensepoint XCL provides early warning of the presence of gases for occupant protection and system monitoring whilst at the same time ensuring protection against fire threats.Through its embedded Bluetooth interface VESDA Sensepoint XCL enables customers to pair the gas detector with their smart device applications to perform installation commissioning and maintenance. This ensures a faster VESDA Sensepoint XCL installation rapid configuration simplicity to operate and simplified maintenance.Key FeaturesAvailable SensorsCarbon Monoxide CO 0 1000ppmCombustible CAT 0 100 LEL Methane Hydrogen Propane Ethanol Butane Octane etc.Hydrogen H2 0 1000ppmCarbon Dioxide CO2 0 5.0 vvCarbon Dioxide CO2 0 5000ppmFactory calibrated detectors CAT Factory calibrated to CH4Integral alarm status LEDsBluetooth 4.0 Bluetooth Low EnergyIntegrates with PLCsHVACBMSFACPConfigurable relays4-20 mA analogue outputs or RS 485 Modbus output

GBP 5028.35

1

Vesda Sensepoint XCL XCL-VEA-CH4-RA Methane CH4 0-100 LEL 4-20mA Relays

Vesda Sensepoint XCL XCL-VEA-CH4-RA Methane CH4 0-100 LEL 4-20mA RelaysXtralis has developed with its sister company Honeywell Analytics a new concept of aspirated gas detectors. When used with the VESDA-E VEA VESDA Sensepoint XCL provides early warning of the presence of gases for occupant protection and system monitoring whilst at the same time ensuring protection against fire threats.Through its embedded Bluetooth interface VESDA Sensepoint XCL enables customers to pair the gas detector with their smart device applications to perform installation commissioning and maintenance. This ensures a faster VESDA Sensepoint XCL installation rapid configuration simplicity to operate and simplified maintenance.Key FeaturesAvailable SensorsCarbon Dioxide CO2 0 5000ppmCarbon Dioxide CO2 0 5.0 vvHydrogen H2 0 1000ppmCombustible CAT 0 100 LEL Methane Hydrogen Propane Ethanol Butane Octane etc.Carbon Monoxide CO 0 1000ppmFactory calibrated detectors CAT Factory calibrated to CH4Integral alarm status LEDsBluetooth 4.0 Bluetooth Low EnergyIntegrates with PLCsHVACBMSFACPConfigurable relays4-20 mA analogue outputs or RS 485 Modbus output

GBP 1424.17

1

Vesda Sensepoint XCL XCL-VEA-CO-RA Carbon Monoxide CO 0-300PPM 4-20mA Relays

Vesda Sensepoint XCL XCL-VEA-CO-RA Carbon Monoxide C0 0-300PPM 4-20mA RelaysXtralis has developed with its sister company Honeywell Analytics a new concept of aspirated gas detectors. When used with the VESDA-E VEA VESDA Sensepoint XCL provides early warning of the presence of gases for occupant protection and system monitoring whilst at the same time ensuring protection against fire threats.Through its embedded Bluetooth interface VESDA Sensepoint XCL enables customers to pair the gas detector with their smart device applications to perform installation commissioning and maintenance. This ensures a faster VESDA Sensepoint XCL installation rapid configuration simplicity to operate and simplified maintenance.Key FeaturesAvailable SensorsCarbon Monoxide CO 0 1000ppmCombustible CAT 0 100 LEL Methane Hydrogen Propane Ethanol Butane Octane etc.Hydrogen H2 0 1000ppmCarbon Dioxide CO2 0 5.0 vvCarbon Dioxide CO2 0 5000ppmFactory calibrated detectors CAT Factory calibrated to CH4Integral alarm status LEDsBluetooth 4.0 Bluetooth Low EnergyIntegrates with PLCsHVACBMSFACPConfigurable relays4-20 mA analogue outputs or RS 485 Modbus output

GBP 1283.04

1

Lexicomm ViLX-ACR Touchscreen Assist Call Repeater

Lexicomm ViLX-ACR Touchscreen Assist Call RepeaterA compact 2.8 touchscreen mounted in a double gang MK style plate to indicate assist calls ideal for mounting in a desk or on the wall in a reception.The Lexicomm ViLX-ACR provides remote indication of Assist Call alarms and provides an acknowledgment facility. It is ideal for mounting within a reception desk or on a wall due to its compact size and pleasing aesthetics.It connects to the Lexicomm network via the nearest ViLX-EX8 System Expander panel via Cat 5 cable plugging in to a dedicated port. It can be located up to 30m away and does not require a power supply and does not take a line output.It has a brushed stainless-steel finish 2.8 high contrast full colour touch screen display. Sized at 146mm x 86mm it mounts onto 25mm deep standard double gang electrical box.Key Features2.8 TFT touch screen colour displayHigh volume sounder with volume controlConnects to Lexicomm System ExpandersAesthetically pleasing stainless finishNo local power requiredCan be Located up to 30m from the expander using Cat 5 Cable

GBP 355.84

1

Notifier Honeywell Contact Interface Module CIM 583341.21

Notifier Honeywell Contact Interface Module CIM 583341.21The CIM is used as an interface of VARIODYN D1 system for the connection of 8 control contacts. The 8 control contacts can be configured as either an input or an output. Four of the eight contacts can be programmed in the input function with monitoring of connection line. A 3 m long Cat 5 cable is included to connect from CIM to the TWI input of DOM.Key FeaturesEN 54-16 certifiedContacts as inputs or outputs freely programmable 4 of which can be monitoredCAT5 cabling to DOMMounting by mounting to the DIN-track possibleConnection of different trades possible via CIM

GBP 850.14

1

Aritech ATS7340 4g Cellular Communicator For Advisor Advanced Panels Only. Sim Not Provided.

Aritech ATS7340 4g Cellular Communicator For Advisor Advanced Panels Only. Sim Not Provided.A 4G3G2G cellular module for ATSx500A panels.Key FeaturesReliable CAT-1 LTE connectivity for 4G networks with 3G and 2G fallbackCyber-secure by design - both the new modem and the module firmware have been redesigned to stand against modern cyber security threatsFull alarm reporting via GSM - can be used a primary or secondary reporting pathAll popular reporting formats available including voice reporting and audio listen-in. Digital audio codec driver significantly improves voice quality in voice reporting.Data connection for upload and download can be used to connect to the panel via ATS85xx and Advisor Advanced App.8 status LEDs for diagnosticsMulti-band GSM antenna is includedAll popular 2G3G4G bands are supportedSMS command control on Advisor AdvancedFast and simple local firmware upgrade for the communication module and the modem

GBP 308.46

1

Aritech MC352-1P1S 1-Port 101001000Base-T IEEE802.3afat Copper 1-Port SFP Unmanaged Media Converter

Aritech MC352-1P1S 1-Port 101001000Base-T IEEE802.3afat Copper 1-Port SFP Unmanaged Media Converter 1x 30W PoE Budget -4075These IFS Gigabit Ethernet to SFP Industrial Media Converters are designed for the most demanding IP network applications offering the flexibility of SFP technology and wide operating temperature range.The MC352-1P1S model provides full IEEE802.3-at 30w PoE and serves as a PSE device.SFP TechnologyThese models convert 101001000Base-T Ethernet on copper to 1000Base-X fibre via Small Form-factor Pluggable SFP technology.These media converters can be custom configured to your exact system design specifications by utilizing a variety of IFS SFP MiniGBIC modules. IFS SFP Mini-GBIC modules are available in a variety of versions from multi-mode or single mode fibre 1 or 2 fibres and wide-temperature versions.Key Features101001000 Base-SXBXLXLHXZX and 100 Base-FXBXLX10100Base-TX 2-pair Cat. 5e6 UTP cable up to 100 meters1 SFP slot provides custom configurationOptical fibre and distance varies by SFP ordered separatelyPlug-n-play installationSlim IP30 metal enclosureDIN-rail or wall-mounting24 to 48 VDC with redundant power with reverse-polarity protectionAlarm relay output for port breakdown and power-failure alertComplies with IEC60068-2-xx standards for free-fall shock and vibrationWide operating temperature range of -40C 75CPower over EthernetComplies with IEEE 802.3atInserts 52VDC 30w power on Category network cableProtects non-PoE devices if accidentally connectedBackwards compatible with IEEE802.3af

GBP 236.83

1

Carrier MC352-4P-2S-V2 4-Port 101001000Base 2-Port SFP Unmanaged Media Converter - Din Rail Or Wall Mount

Carrier MC352-4P-2S-V2 4-Port 101001000Base 2-Port SFP Unmanaged Media Converter - Din Rail Or Wall MountThe IFS 4-Port Gigabit Ethernet to 2-Port SFP Industrial Media Converter is designed for the most demanding IP network applications offering the flexibility of SFP technology and wide operating temperature range. The MC352-4P-2S-V2 model provides full IEEE802.3-at 30w PoE and serves as a PSE device.This model converts 101001000Base-T Ethernet on copper to 100Base-X or 1000Base-X fibre via Small Form-factor Pluggable SFP technology. The media converter can be custom configured to your exact system design specifications by utilizing a variety of IFS SFP Mini-GBIC modules. IFS SFP Mini-GBIC modules are available in a variety of versions from multi-mode or single mode fibre 1 or 2 fibres and wide-temperature versions.These models support 2 SFP ports that can easily be configured for either drop-and-repeat or redundant path operation. In drop and-repeat mode the units operates like a 6-port switch and can be used as a repeater with an electrical drop or simply as an optical repeaterextender. In redundant path mode the unit will quickly switch to the second SFP port as a redundant path if the primary optical path experiences an optical cable failure. Also if the primary destination port link is down the module will forward the data packet to the redundant path providing a highly fault-tolerant solution for mission critical IP applications.Key Features101001000 Base-SXBXLXLHXZX and 100 Base-FXBXLX101001000Base-T 2-pair Cat. 5e6 UTP cable up to 100 metersComplies with IEEE 802.3at and is backwards compatible with IEEE802.3afInserts 52VDC 30w power on Category network cable2 SFP slots provide for custom configurationOptical fibre and distance vary by SFP ordered separatelyPlug-n-play installationSlim IP30 metal enclosureDIN-rail or wall-mounting12 to 56 VDC redundant power with reverse-polarity protectionAlarm relay output for port breakdown and power-failure alertComplies with IEC60068-2-xx standards for free-fall shock and vibrationWide operating temperature range of -40C 75CProtects non-PoE devices if accidentally connected

GBP 434.05

1

Brand

Merchant

Price (EUR)