ProfitSpring | B2B PPC Agency

C-Tec Adaptor Box to Convert Fire-rated Cable to Cat 5 CATCON

C-Tec Adaptor Box to Convert Fire-rated Cable to Cat 5 CATCONA Fire-Rated Cable to Cat 5 Conversion Adapter Box.

GBP 68.56

1

Ziton DC-9101E Conventional OpticalHeat Detector Without Base

Ziton DC-9101E Conventional OpticalHeat Detector Without BaseThe DC-9101E combines photoelectric optical detection fixed temperature and rate-of-rise detection technology. The smoke and heat sensors are integrated to provide a solution to a wide range of applications allowing detecting of more complex fire types. Amongst these include are fire types generating black smoke as well as small particles fires such as those from burning alcohol.The detector supports installation on the DB-01 conventional detector base for standard applications or the DB-01D diode base when head-out functionality to BS5839 standard is required. Detection sensitivities are programmable using the P-9910B device programmer.Key FeaturesStrong environmental adaptability due to drift compensationReed switch testingRemovable innovative sensing chamber easy for maintenanceFire LED allows 360viewingRemote indicator output available2 levels sensitivities programmable fix temperature or rate of rise programmable2 levels smoke sensitivities programmable level 1 complies with EN 54-7. Heat part complies with EN 54-5

GBP 18.25

1

Apollo 29600-664 Conventional Open-Area Sounder VAD Cat. W - Outdoor - Red Body Red Flash

Apollo 29600-664 Conventional Open-Area Sounder VAD Cat. W - Outdoor - Red Body Red FlashThe Conventional Open-Area Wall Sounder VAD is used to provide audible and visual warning of a fire. Combining an EN 54-3 compliant sounder with an EN 54-23 compliant VAD enables this device to be used in areas that require the use of both an audible and a visual alarm.Key FeaturesFor use outdoorsRed body with red flashConventional

GBP 176.29

1

Kidde NC-D-PT Conventional Device Programmer

Kidde NC-D-PT Conventional Device ProgrammerThe NC-D-PT is a hand-held tool for programming and configuration ofNC-Series conventional point and beam detectors. It can be used toread parameters and set the operating modes and sensitivities ofthese devices if the default settings require adjustment for harcher orspecial applications.Key FeaturesHand held portableEasy operation4-digit alphanumeric LCD displayLow-consumption hibernation and power saving functions extends the operating timeBattery low indication

GBP 152.66

1

Haes WRL-RC-I00 WMST EN54-23 W-Cat Red Flash Red Body Strobe

Haes WRL-RC-I00 WMST EN54-23 W-Cat Red Flash Red Body StrobeW Class wall mount approved - this strobe would fit yourneed perfectly coming with red and white body colour options and white or redflash colour to suit your environment.Approved to EN54-23 EN54-17 it enables a completefully compliant and cost-effective fire alarm system by reducing installation andcommissioning costs through fewer wiring points.This solution enables easy system extensions in legacy andnew projects thereby providing the highest level of protection for allbuilding occupants from a trusted brand.Key FeaturesRed flashRed body

GBP 117.55

1

Haes WRA-RC-I00 WMSS EN54-23 W-Cat Red Flash Red Body Strobe

Haes WRA-RC-I00 WMSS EN54-23 W-Cat Red Flash Red Body StrobeW Class wall mount approved - this strobe would fit yourneed perfectly coming with red and white body colour options and white or redflash colour to suit your environment.Approved to EN54-23 EN54-17 it enables a completefully compliant and cost-effective fire alarm system by reducing installation andcommissioning costs through fewer wiring points.This solution enables easy system extensions in legacy andnew projects thereby providing the highest level of protection for allbuilding occupants from a trusted brand.Key FeaturesRed flashRed body

GBP 166.76

1

Apollo 55000-739APO XP95 Open-Area VAD Cat. C - White Body Red Flash C-3-8

Apollo 55000-739APO XP95 Open-Area VAD Cat. C - White Body Red Flash C-3-8The XP95 Open-Area Visual Alarm Devices VADs have been developed as primary or supplementary alarm devices. The loop powered VAD may be used in situations where there is a risk that sounders will not be heard. It might also be required where deaf or hearing impaired persons may be present.Key FeaturesHigh intensity red LEDsEN 54-23 compliant Category C VADCoverage C-3-8Flash Rate 0.5 HzFault signal if LED checked

GBP 45.24

1

Apollo Cat O. XP95 VAD Base with Isolator 45681-709APO

Apollo Cat O. XP95 VAD Base with Isolator 45681-709APOThe XP95 range of analogue addressable fire detectors uses tried and trusted technology to give the best performance and has unique features that benefit the installer and the end user. It is suitable for medium-to-large applications with simple installation requirements. As it operates using digital communication XP95 has a high immunity from corruption and is therefore often preferred in a large system where life safety is critical. XP95 products are frequently used in commercial industrial financial government ITtelecoms and healthcare applications.The XP95 VAD Base is a loop-powered VAD combined with a standard intelligent mounting base. It is used to signal a fire alarm in enclosed areas. The VAD base can be used with either a detector fitted or with a cap as a stand-alone device.Key FeaturesEN54-23 approvedFlash rate of 0.5HzSynchronisation of VAD flashIndividual and group addressingUnique VAD self-testLoop-poweredBuilt in isolator

GBP 58.67

1

Apollo Cat O. XP95 Sounder VAD Base with Isolator 45681-705APO

Apollo Cat O. XP95 Sounder VAD Base with Isolator 45681-705APOThe XP95 Sounder VAD Base is a loop-powered sounder and EN 54-23 approved VAD combined with a standard intelligent mounting base. It is used to signal a fire alarm in enclosed areas.You can perform a Self Test this is an important safety feature which has been incorporated into the Sounder VAD Bases when it is switched on it tests itself by checking the actual sound output and flash operation.There are 3 possible outcomes from the test if the transmitter readsA value of 1 Sounder fault this means there was no sound detected in 5 seconds of the sounder being switched on.A value of 2 VAD fault means there is no current being drawn by the LEDs.A value of 3 Sounder and VAD fault where neither of the above elements are operating correctly.If no sound is detected within 5 seconds of the Sounder VAD Bases being switched on it will transmit an analogue value of 1 sounder fault when it is next polled.This feature can also be used during commissioning or periodical maintenance testing. Simply activate the Sounder VAD for at least 5 seconds and check the control panel for a fault signal. If none is received the Sounder VAD Base is working properly.Key FeaturesEN54-23 approvedFlash rate of 0.5HzSynchronisation of alert and evacuate tonesSynchronisation of visual indicator flashIndividual and group addressingUnique acoustic and VAD self-testBuilt in isolator

GBP 72.02

1

Apollo RW1500-210APO Reach Open-Area Sounder VAD Cat. W White Body White-Flash W-2.5-7

Apollo RW1500-210APO Reach Open-Area Sounder VAD Cat. W White Body White-Flash W-2.5-7The RW1500-210APO is a wireless analogue addressable interface and a conventional open-area sounder VAD that can be used as a stand-alone notification device.The REACH Wireless Open-Area Wall Sounder VAD Base includes a 360 LED indicator which to indicate status conditions.REACH Wireless devices are supplied with two CR123 batteries battery A and B. The device switches periodically between the two batteries on a controlled sequence. For correct operation of the device both batteries are required with adequate capacity reserves.The REACH range is designed to solve challenging installation scenarios for structures with restricted or complex access and installation conditions such as listed buildings out-buildings temporary structures where wired installation or long site downtime is not possible.Key FeaturesCompatible only with REACH Wireless16 tone pairsFour Volume SettingsBi-directional wireless communicationDual channel redundancyFive year battery lifeFive year product warranty

GBP 260.92

1

Apollo RW1500-220APO Reach Open-Area Sounder VAD Cat. W Red Body White Flash W-2.5-7

Apollo RW1500-220APO Reach Open-Area Sounder VAD Cat. W Red Body White Flash W-2.5-7The RW1500-220APO is a wireless analogue addressable interface and a conventional open-area sounder VAD that can be used as a stand-alone notification device.The REACH Wireless Open-Area Wall Sounder VAD Base includes a 360 LED indicator which to indicate status conditions.REACH Wireless devices are supplied with two CR123 batteries battery A and B. The device switches periodically between the two batteries on a controlled sequence. For correct operation of the device both batteries are required with adequate capacity reserves.The REACH range is designed to solve challenging installation scenarios for structures with restricted or complex access and installation conditions such as listed buildings out-buildings temporary structures where wired installation or long site downtime is not possible.Key FeaturesCompatible only with REACH Wireless16 tone pairsFour Volume SettingsBi-directional wireless communicationDual channel redundancyFive year battery lifeFive year product warranty

GBP 260.92

1

C-Tec CP411 CAST-PRO CO Fire Smoke Heat Multisensor

C-Tec CP411 CAST-PRO CO Fire Smoke Heat MultisensorA programmable CAST-PRO CO fire smoke heat multisensorfire detector which is certified to EN54-5 7 17 29 31. It is compatiblewith C-TECs ZFP touchscreen-controlled CAST protocol addressable fire panel.MASC Miniature Advanced Smoke Detection Chamber andAFFIRM algorithms provide incredible tolerance to false alarms whilstenhancing the detection of real fire conditions.Key FeaturesDrift compensation functionalityOnboard short circuit loop isolatorIncludes two 8mm x 2mm ultra-bright red LED indicatingstripsMultiple detection modes and different sensitivities fordifferent times of the day1mA alarm current max vol VAD on630uA typical quiescent current 40V DCCompatible with C-TECs CA408 CAST base cw integratedlocking mechanism ID tag

GBP 77.11

1

NC-DPO-W Conventional Point Detector - Optical White

NC-DPO-W Conventional Point Detector - Optical WhiteThe DC-9102E is a photoelectric optical detector suitable for use in hotels restaurants office buildings schools banks warehouses libraries computer rooms switch rooms etc.ApplicationThedetector supports installation on the GST DB-01 conventional detector base forstandard applications or the GST DB-01D diode base when head-out functionalityto BS5839 standard is required. Detection sensitivities are programmable usingthe GST P-9910B device programmer.Key FeaturesSupports drift compensation to enable good environmentaladaptabilitySelf-diagnosticLocal test activation with reed switchChamber contamination checkingAll round LED visibility 360 viewing angle avoids timespent on specific detector orientationConfigurable polling LED supportRemote indicator outputRemovable sensing chamber for easy maintenance2 Programmable smoke sensitivity levels

GBP 19.96

1

C-Tec CP411T CAST-PRO CO Fire Smoke Heat Multisensor cw Tone Sounder

C-Tec CP411T CAST-PRO CO Fire Smoke Heat Multisensor cw Tone SounderA programmable CAST-PRO CO fire smoke heat multisensorfire detector which is certified to EN54-5 7 17 29 31. It is compatiblewith C-TECs ZFP touchscreen-controlled CAST protocol addressable fire panel.MASC Miniature Advanced Smoke Detection Chamber andAFFIRM algorithms provide incredible tolerance to false alarms whilstenhancing the detection of real fire conditions.Key FeaturesDrift compensation functionalityOnboard short circuit loop isolatorIncludes two 8mm x 2mm ultra-bright red LED indicatingstripsMultiple detection modes and different sensitivities fordifferent times of the day1mA alarm current max vol VAD on630uA typical quiescent current 40V DCCompatible with C-TECs CA408 CAST base cw integratedlocking mechanism ID tagComes with Tone Sounder

GBP 99.79

1

Aritech Addressable 2000 Series Multi Sensor Optical Smoke Detector - DP2061T

Aritech Addressable 2000 Series Multi Sensor Optical Smoke Detector - DP2061TThe DP2061T multi-sensor combines the smoke sensitivity of an optical smoke detector with the enhancement of heat sensing. Being able to operate in five modes the DP2061T multi sensor can operate as an optical smoke sensor enhanced by heat detection with two different smoke sensitivities as a dual smoke and heat detector each sensor operating independently an optical sensor only or a heat detector only.Key FeaturesOptical smoke and heat detectionFive modes of operationIndependent control of detector modesOptical sensor with field exchangeable optical chamberEasy numeric addressing 1-128Enhanced communication protocolFull diagnostic self-testingRemote test capabilitiesRemote signalling capabilitiesFull range of sensors optical and heatFull range of IO units MCPs and accessories

GBP 43.92

1

Ziton DI-9101E Digital Intelligent OpticalHeat Multi Sensor Detector

Ziton DI-9101E Digital Intelligent OpticalHeat Multi Sensor DetectorThe DI-9101E intelligent combination heatphotoelectric smoke detector integrates photoelectric detection and fixed temperature and rate of rise detection technology by combining smoke sensor and semi-conductor heat sensor in mechanism and circuitry structure. It not only overcomes the disadvantage that detectors using common infrared scattering technology are insensitive to black smoke with small particles but also can pick up fire with obvious rise of temperature such as alcohol flame thus extending its application range.Key FeaturesElectrically addressedStrong environmental adaptability due to drift compensationSelf-diagnosticReed switch testDirty chamber checkingLED for 360 visionPossible to switch off pulling LEDRemote indicator output2 levels smoke sensitivities level 1 complies with EN 54-7LPCB Approved

GBP 35.72

1

Apollo Discovery Cat O. Discovery Sounder VAD Base with Isolator 45681-700APO

Apollo Discovery Cat O. Discovery Sounder VAD Base with Isolator 45681-700APOThe Discovery Sounder VAD Base makes full use of the Discovery protocol. For ease of commissioning a Magnetic Wand can be used to test and adjust each sounder VAD locally.Key FeaturesEN54-23 certifiedFlash rate of 0.5HzIt is possible to set individual volume of the sounder from the panel15 pairs of tones including IMO code 1A General Emergency Alarm and IMO Code 2 All ClearBuilt in isolatorBrand InformationDiscovery is a range of high-specification analogue addressable fire detectors and alarm devices. Discovery detectors offer effective false alarm management by a combination of EN 54 approved operating modes and sophisticated algorithms. Drift compensation further reduces the likelihood of false alarms caused by a build-up of dust in the sensing chamber. In addition to the familiar smoke and heat detectors the Discovery range features two multisensor detectors. One is an opticalheat multisensor which can be used to protect against many types of fire risk. The other is a carbon monoxideheat multisensor which protects against both smouldering fires and those generating heat.OperationThe Discovery Multisensor construction is similar to that of the optical detector but uses a different lid and optical mouldings to accommodate the thermistor heat sensor. The Discovery OpticalHeat Multisensor Detector contains an optical smoke sensor and a thermistor temperature sensor whose outputs are combined to give the final analogue value. The way in which the signals from the two sensors are combined depends on the response mode selected.The five modes provide response behaviour which incorporates pure heat detection pure smoke detection and a combination of both. The multisensor is therefore useful over the widest range of applications. The signals from the optical smoke sensing element and the temperature sensor are independent and represent the smoke level and the air temperature respectively in the vicinity of the detector.The detectors micro-controller processes the two signals according to the mode selected. When the detector is operating as a multisensor the temperature signal processing extracts only rate-of-rise information for combination with the optical signal. In these modes the detector will not respond to a slow temperature increase even if the temperature reaches a high level. A large sudden change in temperature can however cause an alarm without the presence of smoke if sustained for 20 seconds.

GBP 78.12

1

C-Tec CA414 CA Programmable Multisensor Detector

C-Tec CA414 CA Programmable Multisensor DetectorA high-quality programmable multi-sensor fire detector for use with C-TECs XFP ZFP CAST protocol Addressable Fire Panels.Key FeaturesLPCB certified to EN54-5 7 17 and CEA 4021Kiwa Telefication certified to EN54-13Onboard programmable heat smoke sensors make it deal for detecting a wide range of fires whilst also reducing false alarmsMultiple sensitivitysensor settingsSmart algorithms help reduce false alarmsDrift compensation functionalityShort circuit loop isolatorIncludes two 8mm x 2mm ultra-bright red LED indicating stripsDifferent sensitivities can be selected for different times of the day daynight building occupiedunoccupied etc5mA typical alarm current 370uA typical quiescent current 22-40V DCProgrammable multi-function status LEDCompatible with C-TECs CA408 CAST base cw integrated locking mechanism ID tag

GBP 38.32

1

C-Tec CP414T CAST-PRO Smoke Heat Multisensor cw Tone Sounder

C-Tec CP414T CAST-PRO Smoke Heat Multisensor cw ToneSounderMultiple functionality in a single device smoke heatmultisensor fire detection plus a 92dbA tone Alarm sounder detects realfires quickly reduces false alarms effectively and indicates true alarmconditions decisively.Key FeaturesCertified to EN54-3 5 7 17 29.Compatible with C-TECs ZFP touchscreen-controlled CASTprotocol addressable fire panel.MASC Miniature Advanced Smoke Detection Chamber andAFFIRM algorithms provide incredible tolerance to false alarms whilstenhancing the detection of real fire conditions.Drift compensation functionality.Onboard short circuit loop isolator.Includes two 8mm x 2mm ultra-bright red LED indicatingstrips.Multiple detection modes and different sensitivities fordifferent times of the day.5.4mA max. alarm current max volume.590uA typical quiescent current 40V DC.Compatible with C-TECs CA408 CAST base cwintegrated locking mechanism ID tag.

GBP 74.39

1

C-Tec BF391 Isolated Failsafe Monitor Unit

C-Tec BF391 Isolated Failsafe Monitor UnitAllows IO devices that may not be compatible with the PSUfailure requirements of BS 7273-4 Cat A to comply.Is supplied on a single gang plate with an onboard isolatingEnd of Line Unit EOL and normally energised 24V 3A rated relay.Provides failsafe operation per BS 7273-4 Cat A B Crequirements for all compatible IO units.Provides failsafe operation per BS 7273-4 Cat A B Crequirements for multiple coincidental loop failures sometimes required in aspecification above and beyond the requirements of BS 7273-4 for allcompatible IO units.Key FeaturesAccommodates IO units sited inside or outside the 24V Auxenclosure IO units sited remotely require a BF390 EOL unit to maintain thefailsafe functionProvides complete galvanic isolation between the fire alarmsystem and the door release systemProvides where allowed failsafe manual door releasemonitoring to BS 7273-4 Cat A utilising a single TE cable for multiplemanual operating points such as free swing doors

GBP 26.46

1

Nittan EV-PYH-SCI Photoelectric Optical amp Heat Cat P Multi-Sensor With Short Circuit Isolator

Nittan EV-PYH-SCI Photoelectric Optical Heat Cat PMulti-Sensor With Short Circuit IsolatorEV-PYH-SCI is an Optical Smoke Heat Category PMulti-sensor Detector with integral Short Circuit Isolator fully compatiblewith Evolution analogue addressable systems.The EV-PYH-SCI comes to the market with some exciting newtechnological advances centred on an enhanced new PY smoke sensing chamber.The sensor includes a spherical feature within the smoke chamber providingunrivalled performance for scattering light plus an Orange LED whichsignificantly improves response across the fire spectrum. The Chamberconstruction is designed to minimise the effect of dirtdust contamination witha fine micromesh made of stainless steel to prevent ingress of even thesmallest insects which can create false alarms.This advanced Multi Sensor is able to combine the benefitsof both optical and heat sensing technologies making it less prone to falsealarms than individual sensing devices. An innovative Nittan designed algorithmreads both signals simultaneously and generates alarm signals from either orboth sensors. The Heat sensor is Category P meaning it can be configured aseither A1R A2S BS or CS heat category.The integral Short Circuit Isolator is bi-directional and inthe event of an external fault will shut down on one side to protect thesystem whilst allowing the device to continue communication with the firealarm control panel from the opposite side. The isolator will self-reset whenthe fault is cleared.The Nittan UB-6-SL-EV Base includes a sliding link toprovide loop continuity when detectors are removed. This is to ensure CallPoint operation is not affected by detector removal in accordance with BS5839-1 Clause 12.2.2.Key FeaturesOrange Optic LED and PY Type Chamber5 Sensitivity SettingsHeat Category P A1RA2SBSCSIntegral -ve Short Circuit IsolatorDrift compensationEvolution FSK protocolEEPROM Addressed with programmer

GBP 35.88

1

Ziton DC-9102E Conventional Optical Smoke Detector

Ziton DC-9102E Conventional Optical Smoke DetectorThe DC-9102E is a photoelectric optical detector suitable for use in hotels restaurants office buildings schools banks warehouses libraries computer rooms switch rooms etc. ApplicationThe detector supports installation on the GST DB-01 conventional detector base for standard applications or the GST DB-01D diode base when head-out functionality to BS5839 standard is required.Detection sensitivities are programmable using the GST P-9910B device programmer.Key FeaturesSupports drift compensation to enable good environmental adaptabilitySelf-diagnosticLocal test activation with reed switchChamber contamination checkingAll round LED visibility 360 viewing angle avoids time spent on specificdetector orientationConfigurable polling LED supportRemote indicator outputRemovable sensing chamber for easy maintenance2 Programmable smoke sensitivity levelsPlease note You will need either theDB-01 common baseor theDB-01D common base with diodefor this detector.

GBP 15.62

1

Fireclass FC460P Optical Detector

Fireclass FC460P Optical DetectorThe FC460 range of detectors use the Fireclass digital protocol to provide robust and reliable communications to the control panel. A wide range of cable types can be used and the open topology capability of the system makes it ideal for the upgrade of older systems whilst reusing the cables to reduce cost. More benign environment where any potential fire will be slow burning can be protected using the optical detector. A choice of sensitivities gives this detector a broad range of applications.Key FeaturesUp to 250 detectors per loop dependant on panel choiceOptional bi-directional line isolationRemote detector verification temperature read outHighly featured service toolProgrammable alarm LED with 360o viewing angleFire isolated and fault LED indicationOptional detector locking pinVariety of sounder basesProtected optical chamber screenRobust coated electronicsExtended Service LifeEN54 and CPD approved

GBP 33.35

1

C-Tec CP414TV CAST-PRO Smoke Heat Multisensor cw Tone Sounder amp C-3-9.4 White VAD

C-Tec CP414TV CAST-PRO Smoke Heat Multisensor cw ToneSounder C-3-9.4 White VADMultiple functionality in a single device smoke heatmultisensor fire detection plus a 92dbA tone Alarm sounder and a C-3-9.4 VAD detects real fires quickly reduces false alarms effectively and indicatestrue alarm conditions decisively.Key FeaturesCertified to EN54-3 5 7 17 23 29.Compatible with C-TECs ZFP touchscreen-controlled CASTprotocol addressable fire panel.MASC Miniature Advanced Smoke Detection Chamber andAFFIRM algorithms provide incredible tolerance to false alarms whilstenhancing the detection of real fire conditions.Drift compensation functionality.Onboard short circuit loop isolator.Includes two 8mm x 2mm ultra-bright red LED indicatingstrips.Multiple detection modes and different sensitivities fordifferent times of the day.13.2mA max. alarm current max vol VAD on.590uA typical quiescent current 40V DC.Compatible with C-TECs CA408 CAST base cwintegrated locking mechanism ID tag.

GBP 112.94

1

C-Tec CP414TVR CAST-PRO Smoke Heat Multisensor cw Tone Sounder amp O-C-1.9-4 Red VAD

C-Tec CP414TVR CAST-PRO Smoke Heat Multisensor cw ToneSounder O-C-1.9-4 Red VADMultiple functionality in a single device smoke heatmultisensor fire detection plus a 92dbA tone Alarm sounder and an O-C-1.9-4red VAD detects real fires quickly reduces false alarms effectively andindicates true alarm conditions decisively.Key FeaturesCertified to EN54-3 5 7 17 23 29.Compatible with C-TECs ZFP touchscreen-controlled CASTprotocol addressable fire panel.MASC Miniature Advanced Smoke Detection Chamber andAFFIRM algorithms provide incredible tolerance to false alarms whilstenhancing the detection of real fire conditions.Drift compensation functionality.Onboard short circuit loop isolator.Includes two 8mm x 2mm ultra-bright red LED indicatingstrips.Multiple detection modes and different sensitivities fordifferent times of the day.13.2mA max. alarm current max vol VAD on.590uA typical quiescent current 40V DC.Compatible with C-TECs CA408 CAST base cwintegrated locking mechanism ID tag.

GBP 133.36

1

Brand

Merchant

Price (EUR)