ProfitSpring | B2B PPC Agency

Aritech AAE-TEST Test Kit For AAE LHD Range

Aritech AAE-TEST Test Kit For AAE LHD RangeA test kit designed for use with the AAE LHD range.

GBP 1837.20

1

Baldwin Boxall Din Module with Microphone Sensitivity BVRDIF5

Baldwin Boxall Din Module with Microphone Sensitivity BVRDIF5RJ45 5-way patch board.Links data andor audio racks when adjacent to each other.

GBP 222.26

1

FFE 1800-101 Portable Test Unit Simulated Flame Detector Test Unit

FFE 1800-101 Portable Test Unit Simulated Flame Detector Test UnitThe 1800-101 is a Portable Test Unit Simulated Flame Detector Test Unit which comes with a rechargeable battery pack charger. This Test Unit can also be used to recalibrate the solar blind ratio of a Talentum flame detector by using the calibration kit.

GBP 1609.50

1

Kidde Airsense Wire Burn Test Rig 9-30051

Kidde Airsense Wire Burn Test Rig 9-30051The unit incorporates a switched 230 volts A.C. input feeding the primary coil of a 200 VA transformer. The transformer has two 6 volt A.C. outputs that are connected across three output terminals. The two outer terminals are the individual 6 volt A.C. outputs and the centre terminal is a common return. This equipment is fitted to a die-cast metal enclosure that is connected to earth. The 230 volts A.C. supply plug is fitted with a 3.0 Amp fuse.Key FeaturesBS 6266 1992. Appendix A. Procedures A.3 and A.4British Telecom WNPCPG 57200 1998 Section 4.1. Formerly FP1063.4 Issue 8 Ultra-high sensitivity. Very high sensitivity.

GBP 1015.68

1

Gent S4-34741-50 Obscuration Test Card Set

Gent S4-34741-50 Obscuration Test Card SetThe S4-34741-50 is an Obscuration Test Card Set designed for use with Gent Beam Detectors.Honeywell Gents S-Quad Beam Sensors provides an enhanced solution for linear beam detection for applications where point detection is either not practical or economic.Powered and controlled via the loop the beam is a market leading device with features such as one man alignment and commissioning which is achieved using the auto gain setting this ensure the optimum alignment is reached.Maintenance of the beam is enhanced with a key operated test feature which simulates the obscuration of the beam in a fire. The Gent loop powered beam is certified to EN54 parts 12 and 17.Key FeaturesS-Quad Beam pairs are loop powered supporting 16 pairs per loopEach beam can be set to one of 6 sensitivity states to provide a best fi t for individual applicationsThe beam provides increased resilience to interference from the sun and other light sourcesRemote key switch provides test facility at ground level without the need to gain access to beams mounted in high areasThe beam incorporates an LED array to indicate signal strength allowing accurate alignment during one person commissioningOptimum sensitivity is maintained by automatic gain setting triggered at the beam during alignmentThe optical lens design is intended to minimise build-up of dust to reduce the maintenance and cleaning requiredThe S-Quad beam is compatible with early versions of the Vigilon Beam using the S-Quad programming base avoiding the need to upgrade to latest control software

GBP 32.03

1

Emergency Lighting Test Key Set

Emergency Lighting Test Key SetA handy set of test keys for various emergency light test grid switches.Complete with a glow-in-the-dark keyring this set includes all the most commonly required key for test grid switches such as Legrand Crabtree Bulgin MK and Eaton.Ideal for servicing engineers and property management companies.

GBP 22.66

1

Morley RTS151KEY Remote Test and Annunciator

Morley RTS151KEY Remote Test and AnnunciatorRemote test and annunciator accessory that enables the detector to be tested remotely providing test and reset functions it has a Red LED to indicate alarm conditions.

GBP 103.20

1

Crowcon C01873 Gas Test Kit Magnet

Crowcon C01873 Gas Test Kit MagnetA Gas Test Kit Magnet replaces C01697 Crow mag key

GBP 46.66

1

Notifier VIEW High Sensitivity Addressable IR Smoke Detector NFXI-VIEW

Notifier VIEW High Sensitivity Addressable IR Smoke Detector NFXI-VIEWThe VIEW high sensitivity high gain amplifier based intelligent smoke sensor is a unique offering from NOTIFIER that provides extremely high sensitivity to fire conditions by detecting the earliest particles of combustion. This is achieved by combining a patented optical chamber with advanced high power output IR LED diode and precision optics technology which is matched with a unique superior high gain IR receiver amplifier enhancing the sensitivity of the device. The chamber is supported by sophisticated processing circuitry and microprocessors that feature smoothing-filter algorithms to help eliminate transient environmental noise conditions and reduce nuisance alarms.The advanced detection capabilities are combined with enhanced AWACS algorithms in the NOTIFIER fire control panel. The result is a very sensitive but stable system that can achieve 0.06 to 6.41 m obscuration sensitivity providing up to 100 times more sensitivity than a standard photoelectric smoke sensor. In addition the light beam and algorithms allow the system to differentiate between dust and smoke particles.Using these algorithms the VIEW system provides drift compensation three levels of maintenance alert selection of nine alarm levels and nine pre-alarm levels. The system includes a self-learn sensitivity adjustment to set the prealarm level just above the peak levels sensed over extended periods for each sensors actual environment. Multiple sensor algorithms permit the control equipment to consider readings from up to six sensors in an area to provide faster detection of incipient fires.Using a point type intelligent sensor the VIEW system inherently does not have transit times from sensing points to a detector a factor inherent in aspiration systems delaying the sensing of a fire condition and since it does not rely on a single sensor for the room no dilution can occur. A point sensor also enables the control panel to provide the operator with a pinpoint description of where the fire is located rather than a room alarm.Key FeaturesExtremely high sensitivity high power output IR LED and high gain IR receiver amplifier based smoke sensorImproved signal stability using the latest LED technology for professional applicationsRedesigned smoke chamber to further reduce the risk of false alarms3-colour LEDs to locate alarms and speed up diagnostics and fault findingIntegrated and controlled isolatorsSupport for the latest OPAL protocol which offers superior performance and diagnostics capabilitiesFull backward compatibility with existing systemsRotary decade address switches

GBP 377.21

1

Apollo 29600-799 Talentum Test Torch

Apollo 29600-799 Talentum Test TorchThe Talentum Test Torch recreates the characteristic spectrum of a flame using a combination of UV and IR bulbs. Once testing is complete the Test Torch can store your test results for download to a PC.The Talentum Test Torch is a test and calibration unit designed to work with the full range of Apollo flame detectors.Using the intuitive menu choose the type of flame detector to be tested squeeze the trigger and the unit will automatically perform a test from a distance of up to 6 metres which means that in many applications the flame detector can be tested from ground level.The unit recreates the characteristic spectrum of a flame using a combination of UV and IR bulbs. Once testing is complete the Test Torch can store your test results for download to a PC. The Test Torches integral battery is recharged via USB from either a PC or an off the shelf USB charger.Key Features1m to 6m testing rangeAccurately simulates a pan fireOperating temperature -10C to 55C

GBP 2340.00

1

Carrier W867 UVIR Test Torch X-Flame Detector - Range UltravioletInfrared UVIR Test Lamp

Carrier W867 UVIR Test Torch X-Flame Detector - Range UltravioletInfrared UVIR Test LampThe W867 UltravioletInfrared UVIR Test Lamp is a portable battery operated explosion-proof source of UV and IR radiation that is used for periodic testing of UV IR or UVIR flame detection systems.The W867 Test Lamp simulates a fire by producing UV and IR radiation with the same frequency and wavelength as the response range of Det-Tronics UVIR detectors enabling the operator to verify proper system operation without the need for an open flame.

GBP 13830.19

1

Aritech VT705P Self Contained Internally Mounted Test Transmitter

Aritech VT705P Self Contained Internally Mounted Test TransmitterThe remote test transmitter VT705P connected to the detector via a plug is used to test the functionality and mounting of the seismic detectors. The test system consist of a test generator inside the seismic detectors VV600602-Plus and the crystal unit VT705P which is mounted on the protected object inside the detector housing.Key FeaturesFunction test of the seismic detectorConnected to detector via a plug

GBP 23.11

1

Gent S4T-DEMO S4T Self Test Demonstration Kit

Gent S4T-DEMO S4T Self Test Demonstration KitA S4T Self Test Demonstration Kit.

GBP 450.82

1

Vesda Xtralis REDSTW100 Smoke Test Wire 100m

Vesda Xtralis REDSTW100 Smoke Test Wire 100m100m of test wire designed for wire burn testing.Hot Wire TestThere are a number of tests that can be used to commission a VESDA system. For data centres a hot wire test is best this test is based on 1 metre of test wire with a high electric load passing through it. As the wire heats and the insulation melts the VESDA detector will respond.Please note The REDSTW100 is equivalent to the 251-001.

GBP 34.58

1

Vesda VTT-10000-UK Test Transformer Wire Burn

Vesda VTT-10000-UK Test Transformer Wire BurnA VTT-10000-UK Test Transformer Wire Burn.

GBP 611.23

1

Fish Tail Test Key Pack of 1 Key KEY21

Fish Tail Test KeyKEY21Emergency Lighting Fish Tail Test Key for ELT10

GBP 3.00

1

Ziton SC008CO CO Fire Detector Test Spray

Ziton SC008CO CO Fire Detector Test SprayThe Ziton SC008CO CO carbon monoxide test spray is designed to provide the correct level of gas to test a CO fire detector. The test gas cannister is engineered to be used with the TR010 touch-sensitive test gas dispenser. This prevents dissipation of the CO during the test and ensures that the minimum CO gas is used. The CO contained in the SC008CO canister is at a level that poses no threat to the user when used correctly.Key FeaturesNo damage to detector plastics and componentsFaster response timeFaster clearing time and detector reset timeMinimum impact to health safety and environmentCFC freeNon flammableSuitable for most makes of CO fire detectorsDesigned for TR010 touch sensitive dispenser

GBP 24.12

1

Carrier CB001 Carrying Bag for Smoke Test Tools

Carrier CB001 Carrying Bag for Smoke Test ToolsA practical versatile and rugged Carrying Bag designed for carrying Smoke Test Tools.

GBP 250.16

1

Vesda Xtralis Smoke Test Wire 100m 251-001

Vesda Xtralis Smoke Test Wire 100m 251-001100m of test wire designed for wire burn testing.Hot Wire TestThere are a number of tests that can be used to commission a VESDA system. For data centres a hot wire test is best this test is based on 1 metre of test wire with a high electric load passing through it. As the wire heats and the insulation melts the VESDA detector will respond.Please note The 251-001 is equivalent to the REDSTW100.

GBP 34.58

1

C-Tec FPRO PDA FoSmeter Afils Test Meter

C-Tec FPRO PDA FoSmeter Afils Test MeterThe PDA FoSmeter Afils Test Meter can be used to help test any audio-frequency induction loop system to British and European performance standards.Key FeaturesA must-have accessory for all AFILS installers and service engineers

GBP 331.04

1

International Gas Detectors 401101A Test Gas Applicator

International Gas Detectors 401101A Test Gas Applicator The 401101A is a test gas applicator for MK3 102 750 Series IGD ATEX Gas Detectors Fit 6 x 4mm ID Tube.

GBP 67.50

1

Kidde Airsense Test Point Sampling Point Assembly Tee 9-10955

Kidde Airsense Test Point Sampling Point Assembly Tee 9-10955As the 1-21888-K074 with the sampling point arrangement replaced by a test point. The cap of the test point can be removed and smoke can be introduced at the test point opening. This is normally done during routine maintenance to test that the systems are still performing as designed.

GBP 21.46

1

Morley LT-ACC-TST DEC Bump Test Bottle

Morley LT-ACC-TST DEC Bump Test BottleThe LT-ACC-TST is DEC Bump Test Bottle designed for use with the Li-ion Tamer Rack Monitor.

GBP 240.41

1

Brand

Merchant

Price (EUR)