ProfitSpring | B2B PPC Agency

Wagner AD-05-4815 Additional Detector for Titanus RackSens - 050m Sensitivity

Wagner AD-05-4815 Additional Detector for Titanus RackSens - 050m SensitivityThe AD-05-4815 is an additional detector designed for use with the Titanus RackSens - 050m sensitivity.The Titanus RackSens is Wagners air sampling smoke detector for monitoring 19 equipment such as server and control cabinets. The fire detection unit can also be expanded to include fire suppression using either integrated or externally attached extinguishing gas cylinders.Key Features050m sensitivity

GBP 558.60

1

Wagner AD-05-4816 Additional Detector for Titanus RackSens - 010m Sensitivity

Wagner AD-05-4816 Additional Detector for Titanus RackSens - 010m SensitivityThe AD-05-4816 is an additional detector designed for use with the Titanus RackSens - 010m sensitivity.The Titanus RackSens is Wagners air sampling smoke detector for monitoring 19 equipment such as server and control cabinets. The fire detection unit can also be expanded to include fire suppression using either integrated or externally attached extinguishing gas cylinders.Key Features010m sensitivity

GBP 1265.80

1

Baldwin Boxall Din Module with Microphone Sensitivity BVRDIF5

Baldwin Boxall Din Module with Microphone Sensitivity BVRDIF5RJ45 5-way patch board.Links data andor audio racks when adjacent to each other.

GBP 222.26

1

Notifier VIEW High Sensitivity Addressable IR Smoke Detector NFXI-VIEW

Notifier VIEW High Sensitivity Addressable IR Smoke Detector NFXI-VIEWThe VIEW high sensitivity high gain amplifier based intelligent smoke sensor is a unique offering from NOTIFIER that provides extremely high sensitivity to fire conditions by detecting the earliest particles of combustion. This is achieved by combining a patented optical chamber with advanced high power output IR LED diode and precision optics technology which is matched with a unique superior high gain IR receiver amplifier enhancing the sensitivity of the device. The chamber is supported by sophisticated processing circuitry and microprocessors that feature smoothing-filter algorithms to help eliminate transient environmental noise conditions and reduce nuisance alarms.The advanced detection capabilities are combined with enhanced AWACS algorithms in the NOTIFIER fire control panel. The result is a very sensitive but stable system that can achieve 0.06 to 6.41 m obscuration sensitivity providing up to 100 times more sensitivity than a standard photoelectric smoke sensor. In addition the light beam and algorithms allow the system to differentiate between dust and smoke particles.Using these algorithms the VIEW system provides drift compensation three levels of maintenance alert selection of nine alarm levels and nine pre-alarm levels. The system includes a self-learn sensitivity adjustment to set the prealarm level just above the peak levels sensed over extended periods for each sensors actual environment. Multiple sensor algorithms permit the control equipment to consider readings from up to six sensors in an area to provide faster detection of incipient fires.Using a point type intelligent sensor the VIEW system inherently does not have transit times from sensing points to a detector a factor inherent in aspiration systems delaying the sensing of a fire condition and since it does not rely on a single sensor for the room no dilution can occur. A point sensor also enables the control panel to provide the operator with a pinpoint description of where the fire is located rather than a room alarm.Key FeaturesExtremely high sensitivity high power output IR LED and high gain IR receiver amplifier based smoke sensorImproved signal stability using the latest LED technology for professional applicationsRedesigned smoke chamber to further reduce the risk of false alarms3-colour LEDs to locate alarms and speed up diagnostics and fault findingIntegrated and controlled isolatorsSupport for the latest OPAL protocol which offers superior performance and diagnostics capabilitiesFull backward compatibility with existing systemsRotary decade address switches

GBP 377.21

1

Wagner AD-05-4705 Titanus RackSens 1U - 0.10m Sensitivity

Wagner AD-05-4705 Titanus RackSens 1U - 0.10m SensitivityThe Titanus RackSens is Wagners air sampling smoke detector for monitoring 19 equipment such as server and control cabinets. The fire detection unit can also be expanded to include fire suppression using either integrated or externally attached extinguishing gas cylinders. Ten air sampling points provide cost-effective false alarm-proof monitoring of up to five server cabinets. This special fire detector is available in two different installation heights one or two U and using either NovecTM or nitrogen as its extinguishing gas.A three-stage safety concept provides a combination of early fire detection and fire suppression.The earliest possible high-sensitivity smoke detection - Minimise fire damage by getting a maximum head start.Automatic system shut down - Withdrawal of necessary support energy required to prevent fires from spreading and data backup via soft shutdown or virtual server management live migration.Optimised gas extinguishing - Targeted extinguishing at the exact source of the fire.Key FeaturesThe Titanus RackSens combines fire detection and suppression into a single unit 88.9 mm construction height 2UThanks to HPLS light source technology this air sampling smoke detector reaches sensitivity levels of 0.1 obs.m making it up to 400 times more sensitive than conventional smoke detectorsProven Logic.Sens fire pattern recognition technology provides excellent security against false alarmsA second detector module can also be incorporated into a dual detector dependency configuration each with two alarm stages providing maximum flexibility in system response behaviourMaintenance and interactive diagnostics can be performed without interrupting operationsA network interface card slot allows central monitoring remote diagnostics and remote maintenance via Ethernet SNMP

GBP 2806.93

1

Wagner AD-05-4700 Titanus RackSens 1U - 0.50m Sensitivity

Wagner AD-05-4700 Titanus RackSens 1U - 0.50m SensitivityThe Titanus RackSens is Wagners air sampling smoke detector for monitoring 19 equipment such as server and control cabinets. The fire detection unit can also be expanded to include fire suppression using either integrated or externally attached extinguishing gas cylinders. Ten air sampling points provide cost-effective false alarm-proof monitoring of up to five server cabinets. This special fire detector is available in two different installation heights one or two U and using either NovecTM or nitrogen as its extinguishing gas.A three-stage safety concept provides a combination of early fire detection and fire suppression.The earliest possible high-sensitivity smoke detection - Minimise fire damage by getting a maximum head start.Automatic system shut down - Withdrawal of necessary support energy required to prevent fires from spreading and data backup via soft shutdown or virtual server management live migration.Optimised gas extinguishing - Targeted extinguishing at the exact source of the fire.Key FeaturesThe Titanus RackSens combines fire detection and suppression into a single unit 88.9 mm construction height 2UThanks to HPLS light source technology this air sampling smoke detector reaches sensitivity levels of 0.1 obs.m making it up to 400 times more sensitive than conventional smoke detectorsProven Logic.Sens fire pattern recognition technology provides excellent security against false alarmsA second detector module can also be incorporated into a dual detector dependency configuration each with two alarm stages providing maximum flexibility in system response behaviourMaintenance and interactive diagnostics can be performed without interrupting operationsA network interface card slot allows central monitoring remote diagnostics and remote maintenance via Ethernet SNMP

GBP 2103.90

1

Wagner AD-05-4710 Titanus RackSens 2U - 0.50m Sensitivity cw Integral Novec 1230 Extinguishant

Wagner AD-05-4710 Titanus RackSens 2U - 0.50m Sensitivity comes with Integral Novec 1230 ExtinguishantThe Titanus RackSens is Wagners air sampling smoke detector for monitoring 19 equipment such as server and control cabinets. The fire detection unit can also be expanded to include fire suppression using either integrated or externally attached extinguishing gas cylinders. Ten air sampling points provide cost-effective false alarm-proof monitoring of up to five server cabinets. This special fire detector is available in two different installation heights one or two U and using either NovecTM or nitrogen as its extinguishing gas.A three-stage safety concept provides a combination of early fire detection and fire suppression.The earliest possible high-sensitivity smoke detection - Minimise fire damage by getting a maximum head start.Automatic system shut down - Withdrawal of necessary support energy required to prevent fires from spreading and data backup via soft shutdown or virtual server management live migration.Optimised gas extinguishing - Targeted extinguishing at the exact source of the fire.Key FeaturesThe Titanus RackSens combines fire detection and suppression into a single unit 88.9 mm construction height 2UThanks to HPLS light source technology this air sampling smoke detector reaches sensitivity levels of 0.1 obs.m making it up to 400 times more sensitive than conventional smoke detectorsProven Logic.Sens fire pattern recognition technology provides excellent security against false alarmsA second detector module can also be incorporated into a dual detector dependency configuration each with two alarm stages providing maximum flexibility in system response behaviourMaintenance and interactive diagnostics can be performed without interrupting operationsA network interface card slot allows central monitoring remote diagnostics and remote maintenance via Ethernet SNMP

GBP 4501.02

1

Wagner AD-05-4715 Titanus RackSens 2U - 0.10m Sensitivity cw Integral Novec 1230 Extinguishant

Wagner AD-05-4715 Titanus RackSens 2U - 0.10m Sensitivity comes with Integral Novec 1230 ExtinguishantThe Titanus RackSens is Wagners air sampling smoke detector for monitoring 19 equipment such as server and control cabinets. The fire detection unit can also be expanded to include fire suppression using either integrated or externally attached extinguishing gas cylinders. Ten air sampling points provide cost-effective false alarm-proof monitoring of up to five server cabinets. This special fire detector is available in two different installation heights one or two U and using either NovecTM or nitrogen as its extinguishing gas.A three-stage safety concept provides a combination of early fire detection and fire suppression.The earliest possible high-sensitivity smoke detection - Minimise fire damage by getting a maximum head start.Automatic system shut down - Withdrawal of necessary support energy required to prevent fires from spreading and data backup via soft shutdown or virtual server management live migration.Optimised gas extinguishing - Targeted extinguishing at the exact source of the fire.Key FeaturesThe Titanus RackSens combines fire detection and suppression into a single unit 88.9 mm construction height 2UThanks to HPLS light source technology this air sampling smoke detector reaches sensitivity levels of 0.1 obs.m making it up to 400 times more sensitive than conventional smoke detectorsProven Logic.Sens fire pattern recognition technology provides excellent security against false alarmsA second detector module can also be incorporated into a dual detector dependency configuration each with two alarm stages providing maximum flexibility in system response behaviourMaintenance and interactive diagnostics can be performed without interrupting operationsA network interface card slot allows central monitoring remote diagnostics and remote maintenance via Ethernet SNMP

GBP 4645.42

1

Notifier NFXI-BEAM Loop Powered Beam Detector

Notifier NFXI-BEAM Loop Powered Beam DetectorThe Opal addressable beam detector is an intelligent reflector type linear optical beam smoke detector designed to operate with Notifier addressable fire alarm systems. It operates primarily on the principle of light obscuration utilising infra-red light. The Infra-Red transmitter generates a beam of light towards a high efficiency reflect. The reflector returns the beam to the receiver where an analysis of the received signal is made. The change in the strength of the received signal is used to determine the alarm condition.Key Features5 100m operating range designed for the protection of buildings such as shopping centres heritage buildings warehouses and other structures with large open spacesEasy set-up and calibration with visual aids for both coarse and fine adjustmentLoop powered with built in isolation for system mappingUtilizes the advanced Opal digital protocol whilst remaining backward compatible with existing Notifier systemThe NFXI-BEAM-T Beam Detector features a unique remote test capability that fully tests both the optics and the electronics of the device. This means theres no need to hire a platform to give high level access to the device in testing.Two automatically variable sensitivity modes compensate for short term environmental changesAutomatic drift compensation compensates for long term sensitivity changes caused by environmental factorsFour fixed sensitivity level

GBP 878.53

1

Wagner AD-10-5230 Detector Module TT for ProSensnet amp Silent

Wagner AD-10-5230 Detector Module TT for ProSensnet SilentThe AD-10-5230 is a detector module TT which has been designed for use with ProSensnet. It features a super high sensitivity four sensitivity levels 0.015 m 0.03 m 0.06 m 0.12 m and supports up to 32 air sampling openings for each detector module.Titanus ProSensnet is Wagners universal air sampling smoke detector for monitoring large areas of up to 6000 m.By combining cutting-edge HPLS light technology with the patented LogicSens smoke development pattern recognition Titanus ProSensnet provides maximum sensitivity and immunity to false alarms at the same time even under tough conditions.The use of a second detector module enables the establishment of dual detector dependency or monitoring of a second independent area.Key FeaturesSensitivity adjustable down to 0.015 light obscurationm in main alarm depending on detector moduleUp to two detector modules with up to three alarm stages each can be evaluatedPrepared for accepting a network card for linking via Ethernet or SNMPUp to 1 x 100 or 2 x 72 air sampling points depending on versionOptional connection of remote display unitsTitanusProSensnet is available in the following versionsStandardCold Storage -F usable at temperatures down to -40 CSilent SL at 23 dB A and up for noise-sensitive areas

GBP 1241.58

1

Notifier NFXI-BEAM-T Loop Powered Beam Detector with Test Facility

Notifier NFXI-BEAM-T Loop Powered Beam DetectorThe Opal addressable beam detector is an intelligent reflector type linear optical beam smoke detector designed to operate with Notifier addressable fire alarm systems. It operates primarily on the principle of light obscuration utilising infra-red light. The Infra-Red transmitter generates a beam of light towards a high efficiency reflect. The reflector returns the beam to the receiver where an analysis of the received signal is made. The change in the strength of the received signal is used to determine the alarm condition.Key Features5 100m operating range designed for the protection of buildings such as shopping centres heritage buildings warehouses and other structures with large open spacesEasy set-up and calibration with visual aids for both coarse and fine adjustmentLoop powered with built in isolation for system mappingUtilizes the advanced Opal digital protocol whilst remaining backward compatible with existing Notifier systemThe NFXI-BEAM-T Beam Detector features a unique remote test capability that fully tests both the optics and the electronics of the device. This means theres no need to hire a platform to give high level access to the device in testing.Two automatically variable sensitivity modes compensate for short term environmental changesAutomatic drift compensation compensates for long term sensitivity changes caused by environmental factorsFour fixed sensitivity level

GBP 1026.98

1

Kidde Airsense Command Module Without Stratos-HSSD 2

Command Module Without Stratos-HSSD 2Stratos-HSSD has unmatched sensitivity potential providing the earliest warning of incipient fire with minimum rate of nuisance alarms.ClassiFire perceptive artificial intelligence ensures that the detector operates at optimum sensitivity for the protected environment without the need for complex setup. This means the detector will configure itself to provide high sensitivity in a computer room or reduced sensitivity in a smoky area.Volt-free fire and fault relay outputs are available for remote monitoring by local fire detection or BMS system. Each detector is provided with 3 pairs of remote control input terminals. The inputs may be configures for number of functions.Key Features High sensitivity provided by laser based forward light scatter for reliable early warningUnique ClassiFire perceptive artificial intelligence system that dynamically adjusts the detectors operating parameters allowing for day to day changes in the protected environment and system contaminationUnwanted alarms from dust are avoided using patented Dual Technology LDD 3D laster dust discrimination and elimination system4 sampling pipes up to 250m maximum total lengthRS485 communications built in as standard for networking and remote communications

GBP 1809.85

1

Kidde Airsense Stratos-HSSD 2 - Minimum Display Version 9-30710

Stratos-HSSD 2 - Minimum Display Version9-30710Stratos-HSSD has unmatched sensitivity potential providing the earliest warning of incipient fire with minimum rate of nuisance alarms.ClassiFire perceptive artificial intelligence ensures that the detector operates at optimum sensitivity for the protected environment without the need for complex setup. This means the detector will configure itself to provide high sensitivity in a computer room or reduced sensitivity in a smoky area.Volt-free fire and fault relay outputs are available for remote monitoring by local fire detection or BMS system. Each detector is provided with 3 pairs of remote control input terminals. The inputs may be configured for a number of functions.Key Features High sensitivity provided by laser based forward light scatter for reliable early warningUnique ClassiFire perceptive artificial intelligence system that dynamically adjusts the detectors operating parameters allowing for day to day changes in the protected environment and system contaminationUnwanted alarms from dust are avoided using patented Dual Technology LDD 3D laster dust discrimination and elimination system4 sampling pipes up to 250m maximum total lengthRS485 communications built in as standard for networking and remote communications

GBP 2068.55

1

Kidde Airsense Stratos-HSSD 2 Standard Detector 9-30621

Airsense Stratos-HSSD 2 Standard Detector9-30621Stratos-HSSD has unmatched sensitivity potential providing the earliest warning of incipient fire with minimum rate of nuisance alarms.ClassiFire perceptive artificial intelligence ensures that the detector operates at optimum sensitivity for the protected environment without the need for complex setup. This means the detector will configure itself to provide high sensitivity in a computer room or reduced sensitivity in a smoky area.Volt-free fire and fault relay outputs are available for remote monitoring by local fire detection or BMS system. Each detector is provided with 3 pairs of remote control input terminals. The inputs may be configured for a number of functions.Key Features High sensitivity provided by laser based forward light scatter for reliable early warningUnique ClassiFire perceptive artificial intelligence system that dynamically adjusts the detectors operating parameters allowing for day to day changes in the protected environment and system contaminationUnwanted alarms from dust are avoided using patented Dual Technology LDD 3D laster dust discrimination and elimination system4 sampling pipes up to 250m maximum total lengthRS485 communications built in as standard for networking and remote communications

GBP 2286.74

1

Kidde Airsense Stratos-HSSD 2 Detector Fitted With Command Module 9-30620

Stratos-HSSD 2 Detector Fitted With Command Module9-30620Stratos-HSSD has unmatched sensitivity potential providing the earliest warning of incipient fire with minimum rate of nuisance alarms.ClassiFire perceptive artificial intelligence ensures that the detector operates at optimum sensitivity for the protected environment without the need for complex setup. This means the detector will configure itself to provide high sensitivity in a computer room or reduced sensitivity in a smoky area.Volt-free fire and fault relay outputs are available for remote monitoring by local fire detection or BMS system. Each detector is provided with 3 pairs of remote control input terminals. The inputs may be configured for a number of functions.Key Features High sensitivity provided by laser based forward light scatter for reliable early warningUnique ClassiFire perceptive artificial intelligence system that dynamically adjusts the detectors operating parameters allowing for day to day changes in the protected environment and system contaminationUnwanted alarms from dust are avoided using patented Dual Technology LDD 3D laster dust discrimination and elimination system4 sampling pipes up to 250m maximum total lengthRS485 communications built in as standard for networking and remote communications

GBP 3376.46

1

Hochiki 1 Pipe Aspiration Smoke Detector with Docking Station FIRELINK-25

Hochiki FIRELINK-25 1 Pipe Aspiration Smoke Detector with Docking StationFIRElink-25 is designed to provide very high sensitivity smoke detection in a small package. A unique sensing technology ensures that the detector operates at optimum sensitivity for the protected environment without the need for complex setup. This means the product will configure itself to provide high sensitivity in a computer room or reduced sensitivity in a smoky area.The detector is designed to fit into a Docking Station which accepts all sampling pipes and cables leaving the detector to be fitted during the final commissioning phase. This ensures that the detector is less likely to be damaged during installation. Volt-free Fire 1 and Fault relay outputs are provided for remote monitoring by local fire detection or BMS systems.Key FeaturesUltra-small low cost aspirating smoke detector for easy and discreet installationHigh sensitivity provided by laser based forward light scatter for reliable early warningSingle sampling pipe up to 50 m in length still airFalse alarms reduced by unique laser sensing technology - able to discriminate against dustRS485 communications built in as standard for networking and remote communications

GBP 1425.86

1

Hochiki 2 Pipe Aspiration Smoke Detector with Docking Station FIRELINK-100

Hochiki FIRELINK-100 2 Pipe Aspiration Smoke Detector with Docking StationFIRElink-100 is designed to provide very high sensitivity smoke detection in a small package. A unique sensing technology ensures that the detector operates at optimum sensitivity for the protected environment without the need for complex setup. This means the product will configure itself to provide high sensitivity in a computer room or reduced sensitivity in a smoky area.The detector is designed to fit into a Docking Station which accepts all sampling pipes and cables leaving the detector to be fitted during the final commissioning phase. This ensures that the detector is less likely to be damaged during installation. Volt-free Fire 1 and Fault relay outputs are provided for remote monitoring by local fire detection or BMS systems.Key FeaturesUltra-small low cost aspirating smoke detector for easy and discreet installationHigh sensitivity provided by laser based forward light scatter for reliable early warningTwo sampling pipes up to 100 m aggregate in length still airFalse alarms reduced by unique laser sensing technology - able to discriminate against dustRS485 communications built in as standard for networking and remote communications

GBP 1943.92

1

Kidde DP721RT Dx700 Series Conventional Multisensor Fire Detector With Relay

Kidde DP721RT Dx700 Series Conventional Multisensor Fire Detector With RelayAll Aritech 700 series smoke detectors continuously monitor their sensitivity and operational status. Background drift is daily compensated to maintain the original calibrated sensitivity within the required limits.Once a day the detector performs a full diagnostic test that includes dynamically testing the sensing chamber and internal electronics. If a detector drifts out of sensitivity range or fails the internal diagnostics test this is reported back to the panel and indicated on the detector with a yellow fault LED.Maintenance friendly sensitivity level test modeThe 700 Series photoelectric detectors include a sensitivity test mode that may be activated by simply holding a magnet near the detectors test point. This initiates a self-diagnostic routine and provides visual indication if service is required. This test mode allows field sensitivity testing without the requirement for external meters or test gas.Field cleaning and serviceThe photoelectric sensing chamber unclips from the detector for easy field cleaning and service. During regular maintenance the detector cover can be removed the optical chamber removed and replaced by a low cost new chamber. On power up the detector auto-calibrates and returns to normal operating mode without any further intervention.The right detector for the right jobFor a truly fast and broad-spectrum detection the DP721RTA offers both optical and heat sensors. The interaction of both the smoke and heat algorithms ensure a quick response to both flaming and smouldering fires.All bases are provided with an integral locking tab for extra security if required. Bases are equipped with a shorting bar between IN and OUT that opens when the head is installed and that may be manually restored when removing the head. This simplifies cable continuity testing.Key FeaturesAutomatic self diagnostics with dynamic full detector and sensitivity testHigh false alarm immunity with floating background with drift compensationSeparate fire and fault LEDs for unambiguous alarm reportingWide operating voltage for use on most conventional systemsPolarity insensitive for carefree installationCOMNONC contacts for easy supervision on any systemManual self diagnostic with visual sensitivity indicationField exchangeable and disposable optical chamber

GBP 46.97

1

Kidde AirSense Stratos HSSD 2 Detector in Steel Enclosure 9-30706

Kidde AirSense Stratos HSSD 2 Detector in Steel Enclosure 9-30706Stratos HSSD2 is designed to provide very high sensitivity smoke detection ensuring the very earliest warning of incipient fire with minimum rate of nuisance alarms. ClassiFire Perceptive Artificial Intelligence ensures that the detector operates at optimum sensitivity for the protected environment without the need for complex setup.This means the product will configure itself to provide high sensitivity in a computer room or reduced sensitivity in a smoky area. Upgradable volt-free Fire and Fault relay outputs are available for remote monitoring by local fire detection or BMS systems. Command module available for central monitoring and display.Typical ApplicationsData storage unitsPrison cellsPlant roomsAir conditioning unitsEquipment racksComputer roomsAir duct protectionHeritage property protectionCritical equipmentAnti-smoking enforcementMotor roomsKey FeaturesHigh sensitivity provided by laser based forward light scatter for reliable early warningCombined sampling pipe up to 200m in length still airUnique ClassiFire Perceptive Artificial Intelligence system that dynamically adjusts the detectors operating parameters allowing for day to day changes in the protected environment and dust separation system contaminationUnwanted alarms from dust are avoided using patented Dual Technology LDD 3D3 Laser Dust Discrimination and elimination systemRS485 communications built in as standard for networking and remote communicationsLarge area aspirating smoke detector up to 2000m2 coverageCPR LPCB VdS NF CSIRO UL FM approved

GBP 2231.89

1

Hochiki 4 Pipe Aspiration Smoke Detector with Command Module FIRELINK-400CM

Hochiki FIRELINK-400CM 4 Pipe Aspiration Smoke Detector with Command ModuleFIRElink-400CM is designed to provide very high sensitivity smoke detection using an aspirating technique. A unique sensing technology ensures that the detector operates at optimum sensitivity for the protected environment without the need for complex set-up.With the integrated Command Module this unit also provides a single location display control and interfacing option for systems of up to 127 detectors and allow global programming of all detector functions simultaneously.Key FeaturesHigh sensitivity provided by laser based forward light scatter for reliable early warningFour sampling pipes up to 200 m aggregate in length still airFalse alarms reduced by unique dust discriminationRS485 communications for networking and remote communicationsCommand Module allows control over other FIRElink units on network

GBP 3950.70

1

Advanced MXP-011 Access Enable Key Switch Assembly for MxPro 4

Advanced MXP-011 Access Enable Key Switch Assembly for MxPro 4The MXP-011 is an Access Enabled Key Switch designed for the MxPro 4 range of addressable control panels.The MxPro4 Control Panel range supports direct installation of 1 key switch. If additional switches are required then an additional key switch input card must be fitted.Key FeaturesEnabledisable controlsGroup isolate to disable IO across networkFor use to startenable a class changeTrapped and un-trapped key switches availableControl of multi change-sensordevice sensitivity modeSimple to install and configureCan be used with all MxPro4 series control panels

GBP 76.08

1

Kidde AirSense Stratos HSSD 2 Detector with Command Module in Steel Enclosure 9-30707

Kidde AirSense Stratos HSSD 2 Detector with Command Module in Steel Enclosure 9-30707Stratos HSSD2 is designed to provide very high sensitivity smoke detection ensuring the very earliest warning of incipient fire with minimum rate of nuisance alarms. ClassiFire Perceptive Artificial Intelligence ensures that the detector operates at optimum sensitivity for the protected environment without the need for complex setup.This means the product will configure itself to provide high sensitivity in a computer room or reduced sensitivity in a smoky area. Upgradable volt-free Fire and Fault relay outputs are available for remote monitoring by local fire detection or BMS systems. Command module available for central monitoring and display.Typical ApplicationsData storage unitsPrison cellsPlant roomsAir conditioning unitsEquipment racksComputer roomsAir duct protectionHeritage property protectionCritical equipmentAnti-smoking enforcementMotor roomsKey FeaturesHigh sensitivity provided by laser based forward light scatter for reliable early warningCombined sampling pipe up to 200m in length still airUnique ClassiFire Perceptive Artificial Intelligence system that dynamically adjusts the detectors operating parameters allowing for day to day changes in the protected environment and dust separation system contaminationUnwanted alarms from dust are avoided using patented Dual Technology LDD 3D3 Laser Dust Discrimination and elimination systemRS485 communications built in as standard for networking and remote communicationsLarge area aspirating smoke detector up to 2000m2 coverageCPR LPCB VdS NF CSIRO UL FM approved

GBP 3320.40

1

Advanced MXP-511 Access Enable Key Switch for MxPro 5

Advanced MXP-511 Access Enable Key Switch for MxPro 5The MXP-511 from the Advanced range is an access enable key switch which has been designed for the MxPro 5 range.The MxPro5 control panel range supports direct installation of up to 8 individual key switches.ApplicationsThe MxPro 5 1 loop permits 1 key-switch to be fitted but the MxPro 5 2 4 loop control panels allow a maximum of 8.Key FeaturesEnabledisable controlsGroup isolate to disable IO across networkFor use to startenable a class changeTrapped and un-trapped key switches availableControl of multi-sensordevice sensitivity mode changeSimple to install and configure

GBP 69.84

1

Talentum Air Purge for Exd Housing 12555

Talentum Air Purge for Exd Housing 12555Whilst the IR2 and IR3 types of Flame Detector can still work with contamination from dust or dirt for example on the sensor window their working range and sensitivity can be reduced. Cleaning the Flame Detector if it is high off the ground may be difficult and or expensive this is where the Flame Detector Air Purge kit comes in.By connecting an Air Line or Compressed Air Cylinder to the Air Purge hose the pressurized air can be used to clean the Flame Detectors sensor window. This can be done as and when required depending of the levels of contamination on the site to keep the Flame Detector working at its maximum capability.

GBP 687.30

1

Talentum Air Purge for Standard Housing 12556

Talentum Air Purge for Standard Housing 12556Whilst the IR2 and IR3 types of Flame Detector can still work with contamination from dust or dirt for example on the sensor window their working range and sensitivity can be reduced. Cleaning the Flame Detector if it is high off the ground may be difficult and or expensive this is where the Flame Detector Air Purge kit comes in.By connecting an Air Line or Compressed Air Cylinder to the Air Purge hose the pressurized air can be used to clean the Flame Detectors sensor window. This can be done as and when required depending of the levels of contamination on the site to keep the Flame Detector working at its maximum capability.

GBP 408.90

1

Brand

Merchant

Price (EUR)