ProfitSpring | B2B PPC Agency

Ecosmart Classic Touch Screen Controller for XBC Units

Ecosmart Classic Touch Screen Controller for XBC Units Product Part Number ES-LCD2 Description Touch screen user control in white incorporating time clock facility. This can control the function of the fan by manual setting or using a set of timed programs.

GBP 692.30

1

Zehnder ComfoAir 155 CM for ceiling mounting

Zehnder ComfoAir 155 CM for ceiling mounting Product Part Number CA155CM-GB Description Zehnder ComfoAir 155 CM - CA155CM-GB The Zehnder ComfoAir 155 CM is a ceiling mounted MVHR unit suitable for properties up to 150m2 and manufactured in Germany to a high standard This unit has a (A+) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems Key features Suitable for home sizes up to 150m2 Airflow rate @100Pa - 285m3/h 93% heat recovery efficiency. 100% full and filtered modulating summer bypass. Internal Humidity sensor Left- or right-hand configuration through software 100% variable AUX speed for use as a way mode, medium speed or purge boost. BMS compatibility option. Volt free contact Adaptive comfort technology. G3 filtration Tool free filter access. SAP Appendix Q listed Controllability The Zehnder ComfoAir units have an optional selection of boost switches and room sensors for demand controller ventilation Inputs Volt free contact boost capability. 240v switched live capability Wall controllers (optional) There are 3 options of additional wall controller Zehnder ZGRC1 The Zehnder ZGRC1 is a two-position switch designed to enable the user to manually select the desired ventilation systems flow rate and provide system notifications Key Benefits 2 separate ventilation flow rate options to select in 1 controller Summer bypass indicator Frost protection indicator Service and Maintenance alert Automatic switching back to low speed after a pre-set time period to avoid the unit accidentally being left in its high speed Zehnder ZGS1 The Zehnder ZGS1 is a three-position switch designed to enable the user to manually select the desired ventilation systems flow rate Zehnder ZGS2 The Zehnder ZGS2 is a two-position switch designed to enable the user to manually select the desired ventilation systems flow rate Room Sensors Zehnder AQR The Zehnder AQR remote air quality sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set activation level covering a range of pollutants such as hydrogen, CO, methane, ethanol and isobutane Adjustable overrun timer between 2-40 minutes Zehnder PIRR The Zehnder PIRR remote passive infra-red movement sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Senses movement up to 7 m away Adjustable overrun timer between 2-40 minutes Zehnder HHR The Zehnder HHR remote humidity sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set humidity activation between 30-90% relative humidity Adjustable overrun timer between 2-40 minutes Zehnder THR The Zehnder THR remote temperature sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set temperature activation between 5-35°C Fixed 2-minute overrun timer BMS Control BMS integration is possible Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. Installation bracket is included with unit Construction The Zehnder range are manufactured of EPP with plastic outer covers Motors Quality EC motors Filtration 2 x G4 filters are fitted to the unit that are easy to replace Optional G4 to air supply Summer By-Pass

GBP 1434.06

1

Zehnder ComfoAir 185 WM for wall or cupboard mounting

Description Zehnder ComfoAir 185 WM - CA185WM-GB The Zehnder ComfoAir 185 WMe is a wall mounted MVHR unit suitable for properties up to 150m2 and manufactured in Germany to a high standard Sap Appendix Q listed with (A+) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems, Key features- Zehnder ComfoAir 185 WM Suitable for home sizes up to 150m2 Airflow rate @100Pa - 285m3/h 92% heat recovery efficiency. 100% full and filtered modulating summer bypass. Internal Humidity sensor SFP as low as 0.57 wls Left- or right-hand configuration through software 100% variable AUX speed for use as a way mode, medium speed or purge boost. BMS compatibility option. Volt free contact Adaptive comfort technology. G3 filtration Tool free filter access. SAP Appendix Q listed Controllability The Zehnder ComfoAir units have an optional selection of boost switches and room sensors for demand controller ventilation Inputs Volt free contact boost capability. 240v switched live capability Wall controllers (optional) There are 3 options of additional wall controller Zehnder ZGRC1 The Zehnder ZGRC1 is a two-position switch designed to enable the user to manually select the desired ventilation systems flow rate and provide system notifications Key Benefits 2 separate ventilation flow rate options to select in 1 controller Summer bypass indicator Frost protection indicator Service and Maintenance alert Automatic switching back to low speed after a pre-set time period to avoid the unit accidentally being left in its high speed Zehnder ZGS1 The Zehnder ZGS1 is a three-position switch designed to enable the user to manually select the desired ventilation systems flow rate Zehnder ZGS2 The Zehnder ZGS2 is a two-position switch designed to enable the user to manually select the desired ventilation systems flow rate Room Sensors Zehnder AQR The Zehnder AQR remote air quality sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set activation level covering a range of pollutants such as hydrogen, CO, methane, ethanol and isobutane Adjustable overrun timer between 2-40 minutes Zehnder PIRR The Zehnder PIRR remote passive infra-red movement sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Senses movement up to 7 m away Adjustable overrun timer between 2-40 minutes Zehnder HHR The Zehnder HHR remote humidity sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set humidity activation between 30-90% relative humidity Adjustable overrun timer between 2-40 minutes Zehnder THR The Zehnder THR remote temperature sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set temperature activation between 5-35°C Fixed 2-minute overrun timer BMS Control BMS integration is possible Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. Installation Wall bracket is included with unit Special pod wall / cupboard mounting option available, ideal for secure fixing during pod transportation Construction The Zehnder range are manufactured of EPP with plastic outer covers Motors Quality EC motors Filtration 2 x G3 filters are fitted to the unit that are easy to replace Summer By-Pass The Zehnder range of units have a 100% summer by-Pass Low Noise Levels Heat Exchanger

GBP 1857.77

1

Panasonic DUO Pre Plumbed Tanks

Panasonic DUO Pre Plumbed Tanks The DUO pre plumbed tank with inbuilt buffer tank are the best option to combine with our Panasonic Mono-bloc units or part of an existing installation being upgraded The compact size of the DUO pre plumbed DHW (domestic hot water) tank offer a simpler and faster installation as there are less connections with no addition space required for a separate buffer tank Simply install the DUO tank to the Mono-Bloc Heat Pump and take all the main hot water and heating pipes from the tank

GBP 3264.76

1

Airflow Adroit DV80 Left Hand Heat Recovery Unit

Airflow Adroit DV80 Left Hand Heat Recovery Unit Showroom Clearance Sale* For use in dwellings up to 120 m2 Up to 90% thermal efficiency and low SFP ‘A’ energy rating Internet control by smart phone, tablet, or PC Triple filter design with F7 pollen filter Automatic, 100% summer by-pass Integral Humidity Sensor Galvanised steel, double-skin casing BMS (Modbus / KNX) connection Optional LCD digital controller with four independent environmental profiles Optional manual four speed controller Auto cut-out switch for extra safety Optional built-in Electric Post-heater Optional smart frost protection Complies with Building Regulations and Passive House certified *Units are from a showroom clearance. Units are new and unused but may have marks or cosmetic damage and may not always be in original packaging With its powerful air volume capacity and high thermal efficiency the DV80 Adroit is suitable for smaller family homes and flats. Control your indoor air environment at home or on the go via the Adroit ‘Cloud’ internet control by smart phone, tablet, or PC. With the triple filter design with an F7 pollen filter, the DV80 Adroit provides additional protection against invisible, harmful particles and creates an ultra-hygienic environment. The automatic, 100% summer by-pass facility isolates the heat recovery function and helps to effectively maintain a temperate indoor air climate during the summer months. The unit includes an easily removable, plastic heat exchanger and may be equipped with a range of optional accessories for higher performance. Benefits of working with BPC Ventilation Number 1 leading MVHR and ventilation system specialists Large range of systems for domestic and commercial applications Authorised Airflow distributors In-house design service Full technical support 1000s of products in stock in our own warehouse Large showroom with working units on display Installer network throughout the UK and Ireland All systems comply to all the

GBP 1152.00

1

Airflow Adroit DV80 EPH Left Hand Heat Recovery Unit

Airflow Adroit DV80 Left Hand Heat Recovery Unit Showroom Clearance Sale* Post Heater For use in dwellings up to 120 m2 Up to 90% thermal efficiency and low SFP ‘A’ energy rating Internet control by smart phone, tablet, or PC Triple filter design with F7 pollen filter Automatic, 100% summer by-pass Integral Humidity Sensor Galvanised steel, double-skin casing BMS (Modbus / KNX) connection Optional LCD digital controller with four independent environmental profiles Optional manual four speed controller Auto cut-out switch for extra safety Optional built-in Electric Post-heater Optional smart frost protection Complies with Building Regulations and Passive House certified *Units are from a showroom clearance. Units are new and unused but may have marks or cosmetic damage and may not always be in original packaging With its powerful air volume capacity and high thermal efficiency the DV80 Adroit is suitable for smaller family homes and flats. Control your indoor air environment at home or on the go via the Adroit ‘Cloud’ internet control by smart phone, tablet, or PC. With the triple filter design with an F7 pollen filter, the DV80 Adroit provides additional protection against invisible, harmful particles and creates an ultra-hygienic environment. The automatic, 100% summer by-pass facility isolates the heat recovery function and helps to effectively maintain a temperate indoor air climate during the summer months. The unit includes an easily removable, plastic heat exchanger and may be equipped with a range of optional accessories for higher performance. Benefits of working with BPC Ventilation Number 1 leading MVHR and ventilation system specialists Large range of systems for domestic and commercial applications Authorised Airflow distributors In-house design service Full technical support 1000s of products in stock in our own warehouse Large showroom with working units on display Installer network throughout the UK and Ireland

GBP 1248.00

1

Airflow Adroit DV50 Right Hand Heat Recovery Unit

Airflow Adroit DV50 Right Hand Heat Recovery Unit Showroom Clearance Sale* DV50 Adroit is a ventilation unit with state-of-the-art technology suitable for small houses up to 80 m2. Designed to provide essential ventilation and to save you money through its intelligent heat recovery facility, this system provides a cost-effective and environmentally friendly option for residential applications. Control your indoor air environment at home or on the go via the Adroit 'Cloud' by smartphone, tablet, or PC. Having the latest, low energy EC fan technology, the DV50 Adroit complies with the ErP 2016 and the proposed ErP 2018 standards. The unit comes with an outstanding 5 years warranty*, is SAP Appendix Q eligible. *Units are from a showroom clearance. Units are new and unused but may have marks or cosmetic damage and may not always be in original packaging KEY FEATURES: Extracts up to 187 m3/hr @ 100 Pa Up to 90% thermal efficiency Automatic, 100% bypass Triple filter design 5 year warranty* 'A' energy rating Internet control by smartphone, tablet, or PC Passive house certified MAIN FEATURES: Supply and extract air ventilation with heat recovery Galvanised steel, powder coated double-skin casing Auto cut-out switch for extra safety BMS connection via MODBUS or KNX (optional) Boost operation with timer On demand control via room or duct sensor options Complies with the NHBC criteria and ErP 2016 standards SAP Appendix Q eligible. Meets building regulations Optional LCD digital controller with four independent environmental profiles Optional manual four speed controller Optional smart frost protection Optional built-in electric post heater Benefits of working with BPC Ventilation Number 1 leading MVHR and ventilation system specialists Large range of systems for domestic and commercial applications Authorised Airflow distributors

GBP 960.00

1

Airflow Adroit DV50 Left Hand Heat Recovery Unit

Airflow Adroit DV50 Right Hand Heat Recovery Unit Showroom Clearance Sale* DV50 Adroit is a ventilation unit with state-of-the-art technology suitable for small houses up to 80 m2. Designed to provide essential ventilation and to save you money through its intelligent heat recovery facility, this system provides a cost-effective and environmentally friendly option for residential applications. Control your indoor air environment at home or on the go via the Adroit 'Cloud' by smartphone, tablet, or PC. Having the latest, low energy EC fan technology, the DV50 Adroit complies with the ErP 2016 and the proposed ErP 2018 standards. The unit comes with an outstanding 5 years warranty*, is SAP Appendix Q eligible. *Units are from a showroom clearance. Units are new and unused but may have marks or cosmetic damage and may not always be in original packaging KEY FEATURES: Extracts up to 187 m3/hr @ 100 Pa Up to 90% thermal efficiency Automatic, 100% bypass Triple filter design 5 year warranty* 'A' energy rating Internet control by smartphone, tablet, or PC Passive house certified MAIN FEATURES: Supply and extract air ventilation with heat recovery Galvanised steel, powder coated double-skin casing Auto cut-out switch for extra safety BMS connection via MODBUS or KNX (optional) Boost operation with timer On demand control via room or duct sensor options Complies with the NHBC criteria and ErP 2016 standards SAP Appendix Q eligible. Meets building regulations Optional LCD digital controller with four independent environmental profiles Optional manual four speed controller Optional smart frost protection Optional built-in electric post heater Benefits of working with BPC Ventilation Number 1 leading MVHR and ventilation system specialists Large range of systems for domestic and commercial applications Authorised Airflow distributors

GBP 960.00

1

Zehnder Caladair Combibox CBH Modular Box Fan

High quality bespoke units manufactured in Spain to order (please contact office for delivery and accurate Pricing) Zehnder Caladair Combibox CBH Modular Box Fan Caladair Combibox is a low consumption modular air handling unit that can be connected to any one or more Combibox Filters, Electric heaters, LPHW, LPCW and DX battery’s allowing for a comprehensive modular air handling unit or simply used on there own These units are suitable for air extraction or supply, featuring a direct drive forward motor, very low consumption, EC motor. Key features Low consumption Equipped with branch connections Connections have double lip seals ensuring network sealing Aluminium profile with reinforced polyamide corners RAL 7035 double skin metal sheets High density 25mm MO mineral wool insulation Swappable and removable panels Local padlockable switch and potentiometer mounted in the standard version Flow rates 200 to 12000 m3/h Isolation switch installed on unit High quality Construction. Models The Combibox CBH comes in four different modulation flows and 6 different sizes. The range includes different versions of flow modulation including constant speed, constant pressure, constant air flow rate and variable flow. Models include the Combibox CBH, Combibox CBH Diva, Combibox CBH Lobby and Combibox CHB Mac. Sizes available: Combibox CBH 4 Combibox CBH 5 Combibox CBH 6 Combibox CBH 7 Combibox CBH 8 Combibox CBH 9 Controllability Control system communicates using MODBUS (RS 485) Diva model – pressure transmitter Co2 sensor Lobby model – constant pressure Mac2 – constant air flow, built in the unit Motors The Combibox fan unit features an EC motor, this motor is direct drive forward motor and is very low consumption.

GBP 5251.20

1

Airflow Adroit DV50 Left Hand Heat Recovery Unit - EPH

Airflow Adroit DV50 Right Hand Heat Recovery Unit EPH Showroom Clearance Sale* DV50 Adroit is a ventilation unit with state-of-the-art technology suitable for small houses up to 80 m2. Designed to provide essential ventilation and to save you money through its intelligent heat recovery facility, this system provides a cost-effective and environmentally friendly option for residential applications. Control your indoor air environment at home or on the go via the Adroit 'Cloud' by smartphone, tablet, or PC. Having the latest, low energy EC fan technology, the DV50 Adroit complies with the ErP 2016 and the proposed ErP 2018 standards. The unit comes with an outstanding 5 years warranty*, is SAP Appendix Q eligible. This EPH unit features a post heater *Units are from a showroom clearance. Units are new and unused but may have marks or cosmetic damage and may not always be in original packaging KEY FEATURES: Extracts up to 187 m3/hr @ 100 Pa Up to 90% thermal efficiency Automatic, 100% bypass Triple filter design 5 year warranty* 'A' energy rating Internet control by smartphone, tablet, or PC Passive house certified MAIN FEATURES: Supply and extract air ventilation with heat recovery Galvanised steel, powder coated double-skin casing Auto cut-out switch for extra safety BMS connection via MODBUS or KNX (optional) Boost operation with timer On demand control via room or duct sensor options Complies with the NHBC criteria and ErP 2016 standards SAP Appendix Q eligible. Meets building regulations Optional LCD digital controller with four independent environmental profiles Optional manual four speed controller Optional smart frost protection Optional built-in electric post heater Benefits of working with BPC Ventilation Number 1 leading MVHR and ventilation system specialists

GBP 1056.00

1

Airflow Adroit DV145

Description Airflow Adroit DV145 R- 90001267 / R-EPH- 90001267EPH L- 90001268 / L-EPH – 90001268EPH The Airflow Adroit DV145 is a high-Quality Passive house approved unit suitable for houses of up to 310m2 that is built to the highest standards that include internal Co2 and Humidity sensors plus triple filter filtration Control with this unit via either a smartphone, tablet, or PC., Automatic Demand control via the internal sensors or the optional use of a wall mounted controller or integrate into a home automation or BMS system via the KNX or Modbus connections BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Airflow Adroit DV145 Suitable for floor areas up to 310m2 Delivers an airflow rate of up to 522 m³/hour @ 100 Pa High heat recovery efficiency of up to 92%. Internet control Via Smartphone App or PC Internal humidity sensor for automatic speed control Internal Co2 Sensor for automatic speed control Optional wall controller On demand control via room or duct sensor options BMS connection via MODBUS or KNX (optional) Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Passive House Approved Triple filter design with 2 x G4 & 1 x F7 pollen filter Galvanised steel, double-skin casing with 20 mm insulation Optional smart frost protection 5-year warranty* (Listed parts Only) 'A' energy rating Triple filter design with 2 x G4 & 1 x F7 pollen filter Galvanised steel, double-skin casing with 20 mm insulation Optional LCD digital controller with four independent environmental profiles Optional VOC (Volatile Organic Compounds) sensor Auto cut-out switch for extra safety Optional built-in electric post-heater Complies with the NHBC criteria and ERP 2016 standards Integral Humidity and Co2 Sensor The Adroit Unit have internal humidity and Co2 sensors that can provide a superior demand-controlled ventilation solution for your property This is possible, as due to changes to humidity and CO2 levels that occur through changes in occupancy or usage, the ventilation will boost or reduce to match demand, without the need of manual intervention. Total filtration Filtration is very important and the Airflow adroit has a unique and highly effective triple filter design containing two ISO Coarse>75% (G4) grade filters and one ISO ePM1 (F7) filter on the supply and extract air flow path to create an ultra-hygienic environment. This filtration system improves the air quality and provides additional air filtration by preventing particles as small as pollen from entering the premises. This is of particular benefit to those that suffer from asthma or hay fever and other respiratory conditions, this unit also complies to the latest regulations of ISO 16890 CONTROL OPTIONS The DV145 Adroit unit shall be controlled by one of the following: Wall mounted 4 speed manual controllers Adroit digital controller Adroit Cloud through the Internet or local network using laptop, smartphone, tablet, etc. BMS via LON or KNX through a PC or a central control system On-demand ventilation through built-in humidity and CO2 sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Optional ADROIT DIGITAL CONTROLLER The optional digital controller provides significant information to the user regarding the performance of their Adroit system including adjusting the ventilation levels, filter maintenance, separate fan control, faults in the system and commissioning the system and intuitive end user functions The DV145 Adroit is controlled via 4 ventilation profiles controls providing the following features: 4 ventilation profiles,100% adjustable Internet connection available Automatic boost function with delay timer Filter maintenance reminder via counter clock (standard) Heater control for optional post-heater Connection to BMS via LON or KNX Self-diagnostic via fault signal relay On-demand control via humidity, CO2 and VOC sensors Separate fan control for ease of commissioning Weekly ventilation programming allows users to pre-set the ventilation levels scheduled for different days Indoor temperature control based on

GBP 3768.48

1

Airflow Adroit DV110

Description Airflow Adroit DV110 R- 90001267 / R-EPH- 90001267EPH L- 90001268 / L-EPH – 90001268EPH The Airflow Adroit DV110 is a high-Quality Passive house approved unit suitable for houses of up to 220m2 that is built to the highest standards that include internal Co2 and Humidity sensors plus triple filter filtration Control with this unit via either a smartphone, tablet, or PC, Automatic Demand control via the internal sensors or the optional use of a wall mounted controller or integrate into a home automation or BMS system via the KNX or Modbus connections BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Airflow Adroit DV110 Suitable for floor areas up to 220m2 Delivers an airflow rate of up to 370 m³/hour @ 100 Pa High heat recovery efficiency of up to 91%. Internet control Via Smartphone App or PC Internal humidity sensor for automatic speed control Internal Co2 Sensor for automatic speed control Optional wall controller On demand control via room or duct sensor options BMS connection via MODBUS or KNX (optional) Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Passive House Approved Triple filter design with 2 x G4 & 1 x F7 pollen filter Galvanised steel, double-skin casing with 20 mm insulation Optional smart frost protection 5-year warranty* (Listed parts Only) 'A' energy rating Triple filter design with 2 x G4 & 1 x F7 pollen filter Galvanised steel, double-skin casing with 20 mm insulation Optional LCD digital controller with four independent environmental profiles Optional VOC (Volatile Organic Compounds) sensor Auto cut-out switch for extra safety Optional built-in electric post-heater Complies with the NHBC criteria and ERP 2016 standards Integral Humidity and Co2 Sensor The Adroit Unit have internal humidity and Co2 sensors that can provide a superior demand-controlled ventilation solution for your property This is possible, as due to changes to humidity and CO2 levels that occur through changes in occupancy or usage, the ventilation will boost or reduce to match demand, without the need of manual intervention. Total filtration Filtration is very important and the Airflow adroit has a unique and highly effective triple filter design containing two ISO Coarse>75% (G4) grade filters and one ISO ePM1 (F7) filter on the supply and extract air flow path to create an ultra-hygienic environment. This filtration system improves the air quality and provides additional air filtration by preventing particles as small as pollen from entering the premises. This is of particular benefit to those that suffer from asthma or hay fever and other respiratory conditions, this unit also complies to the latest regulations of ISO 16890 CONTROL OPTIONS The DV110 Adroit unit shall be controlled by one of the following: Wall mounted 4 speed manual controllers Adroit digital controller Adroit Cloud through the Internet or local network using laptop, smartphone, tablet, etc. BMS via LON or KNX through a PC or a central control system On-demand ventilation through built-in humidity and CO2 sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Optional ADROIT DIGITAL CONTROLLER The optional digital controller provides significant information to the user regarding the performance of their Adroit system including adjusting the ventilation levels, filter maintenance, separate fan control, faults in the system and commissioning the system and intuitive end user functions The DV110 Adroit is controlled via 4 ventilation profiles controls providing the following features: 4 ventilation profiles,100% adjustable Internet connection available Automatic boost function with delay timer Filter maintenance reminder via counter clock (standard) Heater control for optional post-heater Connection to BMS via LON or KNX Self-diagnostic via fault signal relay On-demand control via humidity, CO2 and VOC sensors Separate fan control for ease of commissioning Weekly ventilation programming allows users to pre-set the ventilation levels scheduled for different days Indoor temperature control based on

GBP 3029.28

1

Airflow Adroit DV96

Description Airflow Adroit DV96 R- 900001265 / R-EPH-900001265EPH L- 900001266 / L-EPH -90001266EPH The Airflow Adroit DV96 is a high-Quality Passive house approved unit suitable for houses of up to 170m2 that is built to the highest standards that include internal Co2 and Humidity sensors plus triple filter filtration Control with this unit via either a smartphone, tablet, or PC., Automatic Demand control via the internal sensors or the optional use of a wall mounted controller or integrate into a home automation or BMS system via the KNX or Modbus connections BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Airflow Adroit DV96 Suitable for floor areas up to 170m2 Delivers an airflow rate of up to 288 m³/hour @ 100 Pa High heat recovery efficiency of up to 90%. Internet control Via Smartphone App or PC Internal humidity sensor for automatic speed control Internal Co2 Sensor for automatic speed control Optional wall controller On demand control via room or duct sensor options BMS connection via MODBUS or KNX (optional) Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Passive House Approved Triple filter design with 2 x G4 & 1 x F7 pollen filter Galvanised steel, double-skin casing with 20 mm insulation Optional smart frost protection 5-year warranty* (Listed parts Only) 'A' energy rating Triple filter design with 2 x G4 & 1 x F7 pollen filter Galvanised steel, double-skin casing with 20 mm insulation Optional LCD digital controller with four independent environmental profiles Optional VOC (Volatile Organic Compounds) sensor Auto cut-out switch for extra safety Optional built-in electric post-heater Complies with the NHBC criteria and ERP 2016 standards Integral Humidity and Co2 Sensor The Adroit Unit have internal humidity and Co2 sensors that can provide a superior demand-controlled ventilation solution for your property This is possible, as due to changes to humidity and CO2 levels that occur through changes in occupancy or usage, the ventilation will boost or reduce to match demand, without the need of manual intervention. Total filtration Filtration is very important and the Airflow adroit has a unique and highly effective triple filter design containing two ISO Coarse>75% (G4) grade filters and one ISO ePM1 (F7) filter on the supply and extract air flow path to create an ultra-hygienic environment. This filtration system improves the air quality and provides additional air filtration by preventing particles as small as pollen from entering the premises. This is of particular benefit to those that suffer from asthma or hay fever and other respiratory conditions, this unit also complies to the latest regulations of ISO 16890 CONTROL OPTIONS The DV96 Adroit unit shall be controlled by one of the following: Wall mounted 4 speed manual controllers Adroit digital controller Adroit Cloud through the Internet or local network using laptop, smartphone, tablet, etc. BMS via LON or KNX through a PC or a central control system On-demand ventilation through built-in humidity and CO2 sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Optional ADROIT DIGITAL CONTROLLER The optional digital controller provides significant information to the user regarding the performance of their Adroit system including adjusting the ventilation levels, filter maintenance, separate fan control, faults in the system and commissioning the system and intuitive end user functions The DV96 Adroit is controlled via 4 ventilation profiles controls providing the following features: 4 ventilation profiles,100% adjustable Internet connection available Automatic boost function with delay timer Filter maintenance reminder via counter clock (standard) Heater control for optional post-heater Connection to BMS via LON or KNX Self-diagnostic via fault signal relay On-demand control via humidity, CO2 and VOC sensors Separate fan control for ease of commissioning Weekly ventilation programming allows users to pre-set the ventilation levels scheduled for different days Indoor temperature control based on extract air

GBP 2881.43

1

Airflow Adroit DV245 Heat Recovery Unit

Description Airflow Adroit DV245 R- 90001271 / R-EPH- 90001271EPH L- 90001272 / L-EPH – 90001272EPH The Airflow Adroit DV245 is a high-Quality Passive house approved unit suitable for houses of up to 555m2 that is built to the highest standards that include internal Co2 and Humidity sensors plus triple filter filtration Control with this unit via either a smartphone, tablet, or PC., Automatic Demand control via the internal sensors or the optional use of a wall mounted controller or integrate into a home automation or BMS system via the KNX or Modbus connections BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Airflow Adroit DV110 Suitable for floor areas up to 555m2 Delivers an airflow rate of up to 929 m³/hour @ 100 Pa High heat recovery efficiency of up to 90%. Internet control Via Smartphone App or PC Internal humidity sensor for automatic speed control Internal Co2 Sensor for automatic speed control Optional wall controller On demand control via room or duct sensor options BMS connection via MODBUS or KNX (optional) Full 100% automatic summer bypass to supply unheated air in the summer Passive House Approved Triple filter design with 2 x G4 & 1 x F7 pollen filter Galvanised steel, double-skin casing with 20 mm insulation Optional smart frost protection 5-year warranty* (Listed parts Only) 'A' energy rating Triple filter design with 2 x G4 & 1 x F7 pollen filter Galvanised steel, double-skin casing with 20 mm insulation Optional LCD digital controller with four independent environmental profiles Optional VOC (Volatile Organic Compounds) sensor Auto cut-out switch for extra safety Optional built-in electric post-heater Complies with the NHBC criteria and ERP 2016 standards Integral Humidity and Co2 Sensor The Adroit Unit have internal humidity and Co2 sensors that can provide a superior demand-controlled ventilation solution for your property This is possible, as due to changes to humidity and CO2 levels that occur through changes in occupancy or usage, the ventilation will boost or reduce to match demand, without the need of manual intervention. Total filtration Filtration is very important and the Airflow adroit has a unique and highly effective triple filter design containing two ISO Coarse>75% (G4) grade filters and one ISO ePM1 (F7) filter on the supply and extract air flow path to create an ultra-hygienic environment. This filtration system improves the air quality and provides additional air filtration by preventing particles as small as pollen from entering the premises. This is of particular benefit to those that suffer from asthma or hay fever and other respiratory conditions, this unit also complies to the latest regulations of ISO 16890 CONTROL OPTIONS The DV245 Adroit unit shall be controlled by one of the following: Wall mounted 4 speed manual controllers Adroit digital controller Adroit Cloud through the Internet or local network using laptop, smartphone, tablet, etc. BMS via LON or KNX through a PC or a central control system On-demand ventilation through built-in humidity and CO2 sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Optional ADROIT DIGITAL CONTROLLER The optional digital controller provides significant information to the user regarding the performance of their Adroit system including adjusting the ventilation levels, filter maintenance, separate fan control, faults in the system and commissioning the system and intuitive end user functions The DV245 Adroit is controlled via 4 ventilation profiles controls providing the following features: 4 ventilation profiles,100% adjustable Internet connection available Automatic boost function with delay timer Filter maintenance reminder via counter clock (standard) Heater control for optional post-heater Connection to BMS via LON or KNX Self-diagnostic via fault signal relay On-demand control via humidity, CO2 and VOC sensors Separate fan control for ease of commissioning Weekly ventilation programming allows users to pre-set the ventilation levels scheduled for different days Indoor temperature control based on extract air temperature or supply air temperature

GBP 9150.53

1

Zehnder Caladair Freetime First Eco 3500

Zehnder Caladair Freetime First Eco 3500 Product Part Number Caladair FREETIME 3500 First Eco - CAL24 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability: A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use

GBP 10163.09

1

Zehnder Caladair Neotime 900 First Eco MVHR Units

Zehnder Caladair Neotime 900 First Eco MVHR Units Product part Number Caladair NEOTIME 900 First Eco - CAL02 Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use Motors

GBP 5728.94

1

Zehnder Caladair Neotime 1300 First Eco MVHR Units

Zehnder Caladair Neotime 1300 First EcoMVHR Units Product Part Number Caladair NEOTIME 1300 First Eco - CAL03 Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use Motors

GBP 7563.25

1

Zehnder Caladair Neotime 600 First Eco MVHR unit

Zehnder Caladair Neotime 600 First Eco MVHR Units Product Part Number Caladair NEOTIME 600 First Eco - CAL01 Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability: A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use Motors

GBP 4630.70

1

Zehnder Caladair Freetime First Eco 800

Zehnder Caladair Freetime First Eco 800 Product Part Number Caladair FREETIME 800 First Eco - CDF024149 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use

GBP 5205.10

1

Zehnder Caladair Neotime 2500 First Eco MVHR Unit

Zehnder Caladair Neotime 2500 First Eco MVHR Unit Product Part Number Caladair NEOTIME 2500 First Eco - CAL05 Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use Motors

GBP 9734.34

1

Zehnder Caladair Neotime 1800 First Eco MVHR Units

Zehnder Caladair Neotime 1800 First Eco MVHR Units Product Part Number Caladair NEOTIME 1800 First Eco - CAL04 Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use Motors

GBP 8485.09

1

Zehnder Caladair Carma 9008 First Eco

Zehnder Caladair Carma 9008 First Eco Product Part Number Caladair CARMA 9008 L First Eco - CAL12 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use

GBP 7225.98

1

Zehnder Caladair Carma 9010 First Eco

Zehnder Caladair Carma 9010 First Eco Product Part Number Caladair CARMA 9010 L First Eco - CAL13 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use

GBP 8181.46

1

Zehnder Caladair Freetime First Eco 1500

Zehnder Caladair Freetime First Eco 1500 Product Part Number Caladair FREETIME 1500 First Eco - CDF024150 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability: A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use

GBP 7195.09

1

Zehnder Caladair Freetime First Eco 2700

Zehnder Caladair Freetime First Eco 2700 Product Part Number Caladair FREETIME 2700 First Eco - CAL23 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use

GBP 7906.39

1

Brand

Merchant

Price (EUR)