180 results (0,14832 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Zehnder ComfoAir 155 CM for ceiling mounting

Zehnder ComfoAir 155 CM for ceiling mounting

Zehnder ComfoAir 155 CM for ceiling mounting Product Part Number CA155CM-GB Description Zehnder ComfoAir 155 CM - CA155CM-GB The Zehnder ComfoAir 155 CM is a ceiling mounted MVHR unit suitable for properties up to 150m2 and manufactured in Germany to a high standard This unit has a (A+) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems Key features Suitable for home sizes up to 150m2 Airflow rate @100Pa - 285m3/h 93% heat recovery efficiency. 100% full and filtered modulating summer bypass. Internal Humidity sensor Left- or right-hand configuration through software 100% variable AUX speed for use as a way mode, medium speed or purge boost. BMS compatibility option. Volt free contact Adaptive comfort technology. G3 filtration Tool free filter access. SAP Appendix Q listed Controllability The Zehnder ComfoAir units have an optional selection of boost switches and room sensors for demand controller ventilation Inputs Volt free contact boost capability. 240v switched live capability Wall controllers (optional) There are 3 options of additional wall controller Zehnder ZGRC1 The Zehnder ZGRC1 is a two-position switch designed to enable the user to manually select the desired ventilation systems flow rate and provide system notifications Key Benefits 2 separate ventilation flow rate options to select in 1 controller Summer bypass indicator Frost protection indicator Service and Maintenance alert Automatic switching back to low speed after a pre-set time period to avoid the unit accidentally being left in its high speed  Zehnder ZGS1 The Zehnder ZGS1 is a three-position switch designed to enable the user to manually select the desired ventilation systems flow rate  Zehnder ZGS2 The Zehnder ZGS2 is a two-position switch designed to enable the user to manually select the desired ventilation systems flow rate   Room Sensors Zehnder AQR The Zehnder AQR remote air quality sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set activation level covering a range of pollutants such as hydrogen, CO, methane, ethanol and isobutane Adjustable overrun timer between 2-40 minutes Zehnder PIRR The Zehnder PIRR remote passive infra-red movement sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Senses movement up to 7 m away Adjustable overrun timer between 2-40 minutes Zehnder HHR The Zehnder HHR remote humidity sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set humidity activation between 30-90% relative humidity Adjustable overrun timer between 2-40 minutes Zehnder THR The Zehnder THR remote temperature sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set temperature activation between 5-35°C Fixed 2-minute overrun timer BMS Control BMS integration is possible Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. Installation  bracket is included with unit Construction The Zehnder range are manufactured of EPP with plastic outer covers Motors Quality EC motors Filtration 2 x G4 filters are fitted to the unit that are easy to replace Optional G4 to air supply Summer By-Pass

GBP 1434.06
1

Zehnder ComfoAir 185 WM for wall or cupboard mounting

Zehnder ComfoAir 185 WM for wall or cupboard mounting

Description Zehnder ComfoAir 185 WM - CA185WM-GB The Zehnder ComfoAir 185 WMe is a wall mounted MVHR unit suitable for properties up to 150m2 and manufactured in Germany to a high standard Sap Appendix Q listed with (A+) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems,   Key features- Zehnder ComfoAir 185 WM Suitable for home sizes up to 150m2 Airflow rate @100Pa - 285m3/h 92% heat recovery efficiency. 100% full and filtered modulating summer bypass. Internal Humidity sensor SFP as low as 0.57 wls Left- or right-hand configuration through software 100% variable AUX speed for use as a way mode, medium speed or purge boost. BMS compatibility option. Volt free contact Adaptive comfort technology. G3 filtration Tool free filter access. SAP Appendix Q listed   Controllability The Zehnder ComfoAir units have an optional selection of boost switches and room sensors for demand controller ventilation Inputs Volt free contact boost capability. 240v switched live capability Wall controllers (optional) There are 3 options of additional wall controller Zehnder ZGRC1 The Zehnder ZGRC1 is a two-position switch designed to enable the user to manually select the desired ventilation systems flow rate and provide system notifications Key Benefits 2 separate ventilation flow rate options to select in 1 controller Summer bypass indicator Frost protection indicator Service and Maintenance alert Automatic switching back to low speed after a pre-set time period to avoid the unit accidentally being left in its high speed   Zehnder ZGS1 The Zehnder ZGS1 is a three-position switch designed to enable the user to manually select the desired ventilation systems flow rate   Zehnder ZGS2 The Zehnder ZGS2 is a two-position switch designed to enable the user to manually select the desired ventilation systems flow rate   Room Sensors Zehnder AQR The Zehnder AQR remote air quality sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set activation level covering a range of pollutants such as hydrogen, CO, methane, ethanol and isobutane Adjustable overrun timer between 2-40 minutes Zehnder PIRR The Zehnder PIRR remote passive infra-red movement sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Senses movement up to 7 m away Adjustable overrun timer between 2-40 minutes Zehnder HHR The Zehnder HHR remote humidity sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set humidity activation between 30-90% relative humidity Adjustable overrun timer between 2-40 minutes Zehnder THR The Zehnder THR remote temperature sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set temperature activation between 5-35°C Fixed 2-minute overrun timer BMS Control BMS integration is possible Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. Installation Wall bracket is included with unit Special pod wall / cupboard mounting option available, ideal for secure fixing during pod transportation Construction The Zehnder range are manufactured of EPP with plastic outer covers Motors Quality EC motors Filtration 2 x G3 filters are fitted to the unit that are easy to replace Summer By-Pass The Zehnder range of units have a 100% summer by-Pass Low Noise Levels Heat Exchanger

GBP 1857.77
1

Mitsubishi LGH150-250RVXT-E

Mitsubishi LGH150-250RVXT-E

Mitsubishi LGH150-250RVXT-E Commercial MVHR Product Part Number LGH150RVXT-E LGH200RVXT-E LGH250RVXT-E Required Controller for Unit - PZ-62DR-E Desciption The Lossnay LGH-RVXT-E mechanical ventilation with heat recovery (MVHR) units are designed to supply fresh air into any commercial building whilst simultaneously extracting stale air and, most importantly, recovering valuable heat energy for maximum efficiency - The reduced height makes it suitable for installation in ceiling voids.

GBP 4089.50
1

Special Offer Vectaire Maxi AT BY LCDRH Model

Special Offer Vectaire Maxi AT BY LCDRH Model

Description General up to 163 litre/sec at 50Pa - max 177 litre/sec capacity sfp down to 0.40 W/l/s summer bypass which allows the airflow to bypass the heat exchanger automatically when internal and external temperatures are between adjustable setpoints. frost-stat - proportionally reduces intake motor speed as temperature falls - activated when the outside temperature is between +8ºC and -3ºC. run-time and power outage counters easy to install and maintain easy to access G3 filters universal handing for models without humidistat - left or right (see separate diagram for handing on humidistat models) for fitting vertically into lofts, or cupboards - wall fixing bracket supplied variable low (trickle), boost and purge options for each motor boost speed can be activated by a 230V switched live from: a light switch (if more than one light switch is used, each one must be a double pole switch) Remote humidistat (230V - DRH240) Passive infra red (230V - PIRFF) Thermostat (230V - THM) Remote switch/pull cord - 230V low noise levels low running costs CONTROL FEATURES - STANDARD independent variable speed adjustment for each motor for trickle, boost and purge speeds. adjustable boost speed over-run timer from 0 to 30 minutes. adjustable boost speed delay from 0 to 5 minutes remote purge cable connection on circuit board (for optional purge facility) adjustable night time boost and purge inhibitor integral frost-stat - proportionally reduces intake motor speed as temperature falls automatic summer bypass CONTROL FEATURES - FACTORY SET change of ductwork handing on humidistat version (trip point can be set at manufacture) integral humidistat - proportionally increases motor speeds with rising humidity 0-10V connections can be added for: BMS - for remote motor shut-off CO2 detector home automation system relay for external pre-heater 3 speed selector switch optional remote purge cable - factory connected - adjustable over-run timer from 0 to 250 minutes, Pre-set to 15 minutes (adjustable at factory) holiday mode for reduced speeds when property is unoccupied (factory set option) - default setting is 50% of trickle speed run-time and power outage counters downloadable via QR code Specification casing from steel sheet - epoxy paint finish foam construction lining EPS internal components provide acoustic and thermal enhancement low energy EC brushless motor with single width, single inlet, direct drive, forward curved impellors operates in temperature up to 60ºC easy to access standard, disposable G3 filters counter flow heat exchanger Compliance Building Regulations for enhanced energy saving capability Building Regulations for reliable, efficient ventilation EU RoHS Directive Compliant. Complies with IEC60335-2-80, LVD2006/95/CE and EMC2014/30/UE (European Directive against radio interference and electro-magnetic compatibility manufactured in UK to ISO 9001:2015 and 14001:2015 CE marked SAP PCDB Listed Range WHHR Maxi/ BY - bypass, universal WHHR Maxi/ BLH - bypass, left drain humidistat WHHR Maxi/ BRH - bypass, right drain, humidistat Maxi BY+LCD - bypass, universal, integral LCD Maxi+LHHLCD - bypass, left drain, humidistat, integral LCD Maxi+RHHLCD - bypass, right drain, humidistat, integral LC

GBP 1560.00
1

Special Offer Vectaire Maxi BY LCDRH Model

Special Offer Vectaire Maxi BY LCDRH Model

Description General up to 163 litre/sec at 50Pa - max 177 litre/sec capacity sfp down to 0.40 W/l/s summer bypass which allows the airflow to bypass the heat exchanger automatically when internal and external temperatures are between adjustable setpoints. frost-stat - proportionally reduces intake motor speed as temperature falls - activated when the outside temperature is between +8ºC and -3ºC. run-time and power outage counters easy to install and maintain easy to access G3 filters universal handing for models without humidistat - left or right (see separate diagram for handing on humidistat models) for fitting vertically into lofts, or cupboards - wall fixing bracket supplied variable low (trickle), boost and purge options for each motor boost speed can be activated by a 230V switched live from: a light switch (if more than one light switch is used, each one must be a double pole switch) Remote humidistat (230V - DRH240) Passive infra red (230V - PIRFF) Thermostat (230V - THM) Remote switch/pull cord - 230V low noise levels low running costs CONTROL FEATURES - STANDARD independent variable speed adjustment for each motor for trickle, boost and purge speeds. adjustable boost speed over-run timer from 0 to 30 minutes. adjustable boost speed delay from 0 to 5 minutes remote purge cable connection on circuit board (for optional purge facility) adjustable night time boost and purge inhibitor integral frost-stat - proportionally reduces intake motor speed as temperature falls automatic summer bypass CONTROL FEATURES - FACTORY SET change of ductwork handing on humidistat version (trip point can be set at manufacture) integral humidistat - proportionally increases motor speeds with rising humidity 0-10V connections can be added for: BMS - for remote motor shut-off CO2 detector home automation system relay for external pre-heater 3 speed selector switch optional remote purge cable - factory connected - adjustable over-run timer from 0 to 250 minutes, Pre-set to 15 minutes (adjustable at factory) holiday mode for reduced speeds when property is unoccupied (factory set option) - default setting is 50% of trickle speed run-time and power outage counters downloadable via QR code Specification casing from steel sheet - epoxy paint finish foam construction lining EPS internal components provide acoustic and thermal enhancement low energy EC brushless motor with single width, single inlet, direct drive, forward curved impellors operates in temperature up to 60ºC easy to access standard, disposable G3 filters counter flow heat exchanger Compliance Building Regulations for enhanced energy saving capability Building Regulations for reliable, efficient ventilation EU RoHS Directive Compliant. Complies with IEC60335-2-80, LVD2006/95/CE and EMC2014/30/UE (European Directive against radio interference and electro-magnetic compatibility manufactured in UK to ISO 9001:2015 and 14001:2015 CE marked SAP PCDB Listed Range WHHR Maxi/ BY - bypass, universal WHHR Maxi/ BLH - bypass, left drain humidistat WHHR Maxi/ BRH - bypass, right drain, humidistat Maxi BY+LCD - bypass, universal, integral LCD Maxi+LHHLCD - bypass, left drain, humidistat, integral LCD Maxi+RHHLCD - bypass, right drain, humidistat, integral LC

GBP 1320.00
1

Mitsubishi LGH200RVXT3-E (250x750mm Spigot)

Mitsubishi LGH200RVXT3-E (250x750mm Spigot)

Mitsubishi LGH200RVXT3-E (250x750mm Spigot) Product Part Number LGH200RVXT3-E Description The Commercial Lossnay (LGH) Mechanical Ventilation Heat Recovery (MVHR) systems are designed to supply clean, fresh air into commercial buildings, whilst simultaneously extracting stale air. The RVXT3 units offer a significantly reduced height whilst maintaining a large airflow, allowing easy installation in ceiling voids. Key Features Power Supply: 3 Phase Mitsubishi Electric pioneered heat exchanger enables maximised latent heat exchange, resulting in cost and carbon savings Low unit height (500mm) and lightweight structure, ideal for ceiling installation Four commissionable fan speeds, settable between 25-100%, with independent supply and return fan control offering low running costs and easier compliance to Part L Optional Mitsubishi Electric energy saving CO2 sensors allow automatic incremental fan control for a healthy indoor environment; sensors powered by Lossnay unit No condensate drain required allowing for easy design and installation Dual-barrier coated fans, prevents dust and grease accumulation, ensuring long-term efficient fan operation Constant pressure control available with 0-10V pressure transducer (field supplied), for variable airflow requirements across multiple zones Compatible with Mr Slim and City Multi air conditioning systems for a complete and highly effective system operation Duct handing selectable via dipswitch, for easy and flexible installation Optional high efficiency filters available Sound Power Octave Levels Dimensions

GBP 5089.15
1

Mitsubishi LGH160RVXT3-E (250x750mm Spigot)

Mitsubishi LGH160RVXT3-E (250x750mm Spigot)

Mitsubishi LGH160RVXT3-E (250x750mm Spigot) Product Part Number LGH160RVXT3-E Description The Commercial Lossnay (LGH) Mechanical Ventilation Heat Recovery (MVHR) systems are designed to supply clean, fresh air into commercial buildings, whilst simultaneously extracting stale air. The RVXT3 units offer a significantly reduced height whilst maintaining a large airflow, allowing easy installation in ceiling voids. Key Features Power Supply: 3 Phase Mitsubishi Electric pioneered heat exchanger enables maximised latent heat exchange, resulting in cost and carbon savings Low unit height (500mm) and lightweight structure, ideal for ceiling installation Four commissionable fan speeds, settable between 25-100%, with independent supply and return fan control offering low running costs and easier compliance to Part L Optional Mitsubishi Electric energy saving CO2 sensors allow automatic incremental fan control for a healthy indoor environment; sensors powered by Lossnay unit No condensate drain required allowing for easy design and installation Dual-barrier coated fans, prevents dust and grease accumulation, ensuring long-term efficient fan operation Constant pressure control available with 0-10V pressure transducer (field supplied), for variable airflow requirements across multiple zones Compatible with Mr Slim and City Multi air conditioning systems for a complete and highly effective system operation Duct handing selectable via dipswitch, for easy and flexible installation Optional high efficiency filters available Sound Power Octave Levels Dimensions

GBP 3924.43
1

Mitsubishi LGH250RVXT3-E (250x750mm Spigot)

Mitsubishi LGH250RVXT3-E (250x750mm Spigot)

Mitsubishi LGH250RVXT3-E (250x750mm Spigot) Product Part Number LGH250RVXT3-E Description The Commercial Lossnay (LGH) Mechanical Ventilation Heat Recovery (MVHR) systems are designed to supply clean, fresh air into commercial buildings, whilst simultaneously extracting stale air. The RVXT3 units offer a significantly reduced height whilst maintaining a large airflow, allowing easy installation in ceiling voids. Key Features Power Supply: 3 Phase Mitsubishi Electric pioneered heat exchanger enables maximised latent heat exchange, resulting in cost and carbon savings Low unit height (500mm) and lightweight structure, ideal for ceiling installation Four commissionable fan speeds, settable between 25-100%, with independent supply and return fan control offering low running costs and easier compliance to Part L Optional Mitsubishi Electric energy saving CO2 sensors allow automatic incremental fan control for a healthy indoor environment; sensors powered by Lossnay unit No condensate drain required allowing for easy design and installation Dual-barrier coated fans, prevents dust and grease accumulation, ensuring long-term efficient fan operation Constant pressure control available with 0-10V pressure transducer (field supplied), for variable airflow requirements across multiple zones Compatible with Mr Slim and City Multi air conditioning systems for a complete and highly effective system operation Duct handing selectable via dipswitch, for easy and flexible installation Optional high efficiency filters available Sound Power Octave Levels Dimensions

GBP 6083.10
1

Testo 417 Vane Anemometer Kit 1

Testo 417 Vane Anemometer Kit 1

Testo 417 Vane Anemometer Kit 1 Product Part Number Vane Anemometer - testo-417KIT1 Description The compact vane anemometer Testo 417 was specifically designed to make measuring air inlets and outlets of air conditioning and ventilation systems as easy as possible. Its integrated 100 mm vane ensures rapid and precise results. The instrument automatically calculates time and point average values, as well as the volume flow, displaying them on its screen. This feature is particularly useful for adjusting balanced residential ventilation systems efficiently. The Testo Smart App allows for quick documentation of measurements, making it even more convenient. Moreover, the app serves as a secondary display for the instrument. For added versatility, the Testo 417 is available in two practical kits. The first kit includes two measuring funnels for plate outlets and ventilation grilles, which can be easily attached to the vane, covering a wide range of outlet sizes and formats. The second kit, in addition to the two measuring funnels, includes a volume flow straightener, allowing precise measurements even at swirl diffusers. Package Contents testo 417 funnel kit 1, consisting of vane anemometer testo 417, measuring funnel for plate outlets, measuring funnel for ventilation grilles, carrying bag, calibration protocol and 3 x AA batteries Key Features Easy, fast, and precise measurement of flow, volume flow, and temperature at air inlets and outlets Efficient regulation of balanced residential ventilation Fast documentation with the testo Smart App Fast in-app configuration, graph history, second screen, and measurement data memory in the testo Smart App Timed and point mean value calculation Durability through compact design with robust housing.

GBP 463.32
1

Zehnder Caladair Thermover

Zehnder Caladair Thermover

Zehnder Caladair Thermover Double Flux Air Treatment Station Product part Number Caladair THERMOVER 180S FIRST - CAL58 Caladair THERMOVER 280S FIRST - CAL59 Caladair THERMOVER 400S FIRST - CAL60 Caladair THERMOVER 500S FIRST - CAL61 Key Features High energy efficient double flux air treatment High performance Range of four different unit sizes Flows rates from 600 to 500 m3/h Can operate in constant pressure or constant flow modes F7 filters Low noise level for acoustic comfort 100% plug and play FEE® - Free energy efficiency Cool recovery, free cooling and night cooling Increases good indoor air quality determined by CO2 sensor 2 years parts warranty Energy savings of up to 40% Unit Range -          Caladair Thermover 180S -          Caladair Thermover 280S -          Caladair Thermover 400S -          Caladair Thermover 500S Models Available in 4 models and 4 versions, the Thermover range covers flow rates from 600 to 5000 m3/h. The Thermover range is available in 4 versions in order to suit different usage conditions: First: Self-regulating, plug & play, Modbus RS485 networked station for use in a temperate climate supported by a reversible, thermodynamic system, active temperature management through optimised energy consumption and climate control as well as continued indoor air quality control (IAQ) via a CO2 sensor. Premium: Identical to First but also equipped with an electric battery for precision heating and air blow or ambient intake temperature control for external temperatures as low as -15°C. Must: First features and also including integrated hydraulic kit for ECS production in all seasons. Genius: Identical features to Premium including integrated hydraulic kit for ECS production. Filtration Thermover units are fitted with F7 opacimetric filters for the supply and extract airflows.

GBP 24490.87
1

Testo 417 Vane Anemometer Kit 2

Testo 417 Vane Anemometer Kit 2

Testo 417 Vane Anemometer Kit 2 Product Part Number Vane Anemometer - testo-417KIT2 Description The compact vane anemometer Testo 417 was specifically designed to make measuring air inlets and outlets of air conditioning and ventilation systems as easy as possible. Its integrated 100 mm vane ensures rapid and precise results. The instrument automatically calculates time and point average values, as well as the volume flow, displaying them on its screen. This feature is particularly useful for adjusting balanced residential ventilation systems efficiently. The Testo Smart App allows for quick documentation of measurements, making it even more convenient. Moreover, the app serves as a secondary display for the instrument. For added versatility, the Testo 417 is available in two practical kits. The first kit includes two measuring funnels for plate outlets and ventilation grilles, which can be easily attached to the vane, covering a wide range of outlet sizes and formats. The second kit, in addition to the two measuring funnels, includes a volume flow straightener, allowing precise measurements even at swirl diffusers. Package Contents testo 417 funnel kit 2, consisting of vane anemometer testo 417, measuring funnel for plate outlets, measuring funnel for ventilation grilles, flow straightener, carrying bag, calibration protocol and 3 x AA batteries Key Features Easy, fast, and precise measurement of flow, volume flow, and temperature at air inlets and outlets Efficient regulation of balanced residential ventilation Fast documentation with the testo Smart App Fast in-app configuration, graph history, second screen, and measurement data memory in the Testo Smart App Timed and point mean value calculation Durability through compact design with robust housing.

GBP 549.72
1

Zehnder ComfoAir Flex 250 MVHR

Zehnder ComfoAir Flex 250 MVHR

Zehnder ComfoAir Flex 250 MVHR Product Part Number Zehnder ComfoAir Flex 250 - 471234220 Zehnder ComfoAir Flex 250 with pre-heater - 471234230 Decription Zehnder ComfoAir Flex is a ventilation unit that has been specially developed for apartments and smaller homes, where living space is a valuable resource and needs to be wisely planned. The compact design fits seamlessly in suspended ceilings without sacrificing outstanding performance. Zehnder ComfoAir Flex is equipped with the quietest fan technology on the market and reduces noise levels to a minimum even during full operation. A custom-made heat exchanger and scroll housing ensure a high level of heat recovery while keeping energy consumption low and efficient. ComfoAir Flex 250 The Zehnder ComfoAir Flex 250 has been developed as an ideal solution for apartments and small homes whereefficient use of space is important. Installation within a suspended ceiling is possible, even in small spaces, thanks toits compact design with minimal dimensions and rotatable spigots. It contains features such as its integrated Wi-Ficonnection with app control, automatic true summer by-pass, high heat recovery efficiency and upgradable high gradefilters providing a comfortable, healthy and energy-efficient indoor climate. Key Benefits Wi-Fi enabled as standard for use with the ComfoControl app for IOS or Android. Left or right hand configuration through software alone, no mechanical alteration required. 100% full and filtered modulating summer bypass. Rotatable spigots for flexibility on duct connections. Commissioning wizard for a quick and simple set-up process. Flow control to maintain commissioned flow rates. Adaptive comfort technology. Automatic passive temperature boost in summer. Humidity boost continuously monitors the humidity level within the home and looks for a man-made spike before boosting the unit, irrespective of distance or dilution. Double dry siphon included to enable an easier installation. Tool free filter access. Volt free contact boost capability. 0-10V BMS input. Fire shutdown contact. Remote access. Internal pre-heater option. ISO Coarse (G4), ISO ePM10 (M5) and ISO ePM1 (F7) filter options. Passive House certified.

GBP 2515.26
1

Zehnder ComfoAir Flex 350 MVHR with pre-heater

Zehnder ComfoAir Flex 350 MVHR with pre-heater

Zehnder ComfoAir Flex 350 MVHR Product Part Number Zehnder ComfoAir Flex 350 with pre-heater - 471234260 Decription Zehnder ComfoAir Flex is a ventilation unit that has been specially developed for apartments and smaller homes, where living space is a valuable resource and needs to be wisely planned. The compact design fits seamlessly in suspended ceilings without sacrificing outstanding performance. Zehnder ComfoAir Flex is equipped with the quietest fan technology on the market and reduces noise levels to a minimum even during full operation. A custom-made heat exchanger and scroll housing ensure a high level of heat recovery while keeping energy consumption low and efficient. ComfoAir Flex 350 The Zehnder ComfoAir Flex 350 has been developed as an ideal solution for apartments and small homes whereefficient use of space is important. Installation within a suspended ceiling is possible, even in small spaces, thanks toits compact design with minimal dimensions and rotatable spigots. It contains features such as its integrated Wi-Ficonnection with app control, automatic true summer by-pass, high heat recovery efficiency and upgradable high gradefilters providing a comfortable, healthy and energy-efficient indoor climate. Key Benefits Wi-Fi enabled as standard for use with the ComfoControl app for IOS or Android. Left or right hand configuration through software alone, no mechanical alteration required. 100% full and filtered modulating summer bypass. Rotatable spigots for flexibility on duct connections. Commissioning wizard for a quick and simple set-up process. Flow control to maintain commissioned flow rates. Adaptive comfort technology. Automatic passive temperature boost in summer. Humidity boost continuously monitors the humidity level within the home and looks for a man-made spike before boosting the unit, irrespective of distance or dilution. Double dry siphon included to enable an easier installation. Tool free filter access. Volt free contact boost capability. 0-10V BMS input. Fire shutdown contact. Remote access. Internal pre-heater option. ISO Coarse (G4), ISO ePM10 (M5) and ISO ePM1 (F7) filter options. Passive House certified.

GBP 2928.16
1

Zehnder ComfoAir Flex 350 MVHR

Zehnder ComfoAir Flex 350 MVHR

Zehnder ComfoAir Flex 350 MVHR Product Part Number Zehnder ComfoAir Flex 350 - 471234250 Decription Zehnder ComfoAir Flex is a ventilation unit that has been specially developed for apartments and smaller homes, where living space is a valuable resource and needs to be wisely planned. The compact design fits seamlessly in suspended ceilings without sacrificing outstanding performance. Zehnder ComfoAir Flex is equipped with the quietest fan technology on the market and reduces noise levels to a minimum even during full operation. A custom-made heat exchanger and scroll housing ensure a high level of heat recovery while keeping energy consumption low and efficient. ComfoAir Flex 350 The Zehnder ComfoAir Flex 350 has been developed as an ideal solution for apartments and small homes whereefficient use of space is important. Installation within a suspended ceiling is possible, even in small spaces, thanks toits compact design with minimal dimensions and rotatable spigots. It contains features such as its integrated Wi-Ficonnection with app control, automatic true summer by-pass, high heat recovery efficiency and upgradable high gradefilters providing a comfortable, healthy and energy-efficient indoor climate. Key Benefits Wi-Fi enabled as standard for use with the ComfoControl app for IOS or Android. Left or right hand configuration through software alone, no mechanical alteration required. 100% full and filtered modulating summer bypass. Rotatable spigots for flexibility on duct connections. Commissioning wizard for a quick and simple set-up process. Flow control to maintain commissioned flow rates. Adaptive comfort technology. Automatic passive temperature boost in summer. Humidity boost continuously monitors the humidity level within the home and looks for a man-made spike before boosting the unit, irrespective of distance or dilution. Double dry siphon included to enable an easier installation. Tool free filter access. Volt free contact boost capability. 0-10V BMS input. Fire shutdown contact. Remote access. Internal pre-heater option. ISO Coarse (G4), ISO ePM10 (M5) and ISO ePM1 (F7) filter options. Passive House certified.

GBP 2650.86
1

Mitsubishi LGH160RVX3-E

Mitsubishi LGH160RVX3-E

Mitsubishi LGH160RVX3-E Product Part Number Mitsubishi Lossnay LGH-160RVX3-E - LGH160RVX3-E Required Controller for Unit - PZ-62DR-E Description The Lossnay LGH-RVX3-E Mechanical Ventilation Heat Recovery (MVHR) systems are designed to supply clean, fresh air into any commercial building, whilst simultaneously extracting stale air, ensuring good indoor air quality for occupant wellbeing. These units are also able to recover valuable heat and latent energy from inside the building, maximising energy efficiency and reducing running costs.  

GBP 4089.50
1

Mitsubishi LGH200RVX3-E

Mitsubishi LGH200RVX3-E

Mitsubishi LGH200RVX3-E Product Part Number Mitsubishi Lossnay LGH-200RVX3-E - LGH200RVX3-E Required Controller for Unit - PZ-62DR-E Description The Lossnay LGH-RVX3-E Mechanical Ventilation Heat Recovery (MVHR) systems are designed to supply clean, fresh air into any commercial building, whilst simultaneously extracting stale air, ensuring good indoor air quality for occupant wellbeing. These units are also able to recover valuable heat and latent energy from inside the building, maximising energy efficiency and reducing running costs.  

GBP 4709.32
1

Mitsubishi Lossnay LGH-25RVX3-E

Mitsubishi Lossnay LGH-25RVX3-E

Mitsubishi Lossnay LGH-25RVX3-E Product Part Number Mitsubishi Lossnay LGH-25RVX3-E - LGH25RVX3-E Required Controller for Unit - PZ-62DR-E Description The Lossnay LGH-RVX3-E Mechanical Ventilation Heat Recovery (MVHR) systems are designed to supply clean, fresh air into any commercial building, whilst simultaneously extracting stale air, ensuring good indoor air quality for occupant wellbeing. These units are also able to recover valuable heat and latent energy from inside the building, maximising energy efficiency and reducing running costs.

GBP 892.73
1

Mitsubishi Lossnay LGH-80RVX3-E

Mitsubishi Lossnay LGH-80RVX3-E

Mitsubishi Lossnay LGH-80RVX3-E Product Part Number Mitsubishi Lossnay LGH-80RVX3-E - LGH80RVX3-E Required Controller for Unit - PZ-62DR-E Description The Lossnay LGH-RVX3-E Mechanical Ventilation Heat Recovery (MVHR) systems are designed to supply clean, fresh air into any commercial building, whilst simultaneously extracting stale air, ensuring good indoor air quality for occupant wellbeing. These units are also able to recover valuable heat and latent energy from inside the building, maximising energy efficiency and reducing running costs.

GBP 2093.66
1

Mitsubishi Lossnay LGH-35RVX3-E

Mitsubishi Lossnay LGH-35RVX3-E

Mitsubishi Lossnay LGH-35RVX3-E Product Part Number Mitsubishi Lossnay LGH-35RVX3-E - LGH35RVX3-E Required Controller for Unit - PZ-62DR-E Description The Lossnay LGH-RVX3-E Mechanical Ventilation Heat Recovery (MVHR) systems are designed to supply clean, fresh air into any commercial building, whilst simultaneously extracting stale air, ensuring good indoor air quality for occupant wellbeing. These units are also able to recover valuable heat and latent energy from inside the building, maximising energy efficiency and reducing running costs.

GBP 1170.22
1

Mitsubishi Lossnay LGH-65RVX3-E

Mitsubishi Lossnay LGH-65RVX3-E

Mitsubishi Lossnay LGH-65RVX3-E Product Part Number Mitsubishi Lossnay LGH-65RVX3-E - LGH65RVX3-E Required Controller for Unit - PZ-62DR-E Description The Lossnay LGH-RVX3-E Mechanical Ventilation Heat Recovery (MVHR) systems are designed to supply clean, fresh air into any commercial building, whilst simultaneously extracting stale air, ensuring good indoor air quality for occupant wellbeing. These units are also able to recover valuable heat and latent energy from inside the building, maximising energy efficiency and reducing running costs.

GBP 1787.75
1

Mitsubishi Lossnay LGH-100RVX3-E

Mitsubishi Lossnay LGH-100RVX3-E

Mitsubishi Lossnay LGH-100RVX3-E Product Part Number Mitsubishi Lossnay LGH-100RVX3-E - LGH100RVX3-E Required Controller for Unit - PZ-62DR-E Description The Lossnay LGH-RVX3-E Mechanical Ventilation Heat Recovery (MVHR) systems are designed to supply clean, fresh air into any commercial building, whilst simultaneously extracting stale air, ensuring good indoor air quality for occupant wellbeing. These units are also able to recover valuable heat and latent energy from inside the building, maximising energy efficiency and reducing running costs.

GBP 2402.99
1

Mitsubishi Lossnay LGH-50RVX3-E

Mitsubishi Lossnay LGH-50RVX3-E

Mitsubishi Lossnay LGH-50RVX3-E Product Part Number Mitsubishi Lossnay LGH-50RVX3-E - LGH50RVX3-E Required Controller for Unit - PZ-62DR-E Description The Lossnay LGH-RVX3-E Mechanical Ventilation Heat Recovery (MVHR) systems are designed to supply clean, fresh air into any commercial building, whilst simultaneously extracting stale air, ensuring good indoor air quality for occupant wellbeing. These units are also able to recover valuable heat and latent energy from inside the building, maximising energy efficiency and reducing running costs.

GBP 1430.64
1

Mitsubishi Lossnay LGH-15RVX3-E

Mitsubishi Lossnay LGH-15RVX3-E

Mitsubishi Lossnay LGH-25 - LGH100RVX3-E Product Part Number Mitsubishi Lossnay LGH-15RVX3-E - LGH15RVX3-E Required Controller for Unit - PZ-62DR-E Description The Lossnay LGH-RVX3-E Mechanical Ventilation Heat Recovery (MVHR) systems are designed to supply clean, fresh air into any commercial building, whilst simultaneously extracting stale air, ensuring good indoor air quality for occupant wellbeing. These units are also able to recover valuable heat and latent energy from inside the building, maximising energy efficiency and reducing running costs.

GBP 757.39
1