ProfitSpring | B2B PPC Agency

Sealey VS0031 Cooling System & Cap Testing Kit

Capless cooling system tester uses an inflatable bladder to seal the pressure head to the radiator or header tank. Bladder system can be used on both screw and bayonet fittings and seals 90% of cars and light commercial vehicles straight out of the box. Also suitable for motorcycles, off-road and marine applications. Supplied with set of double end adaptors enabling testing of cooling system pressure caps. Supplied in storage case.

GBP 295.10

1

Sealey HBS97R Rails for Headlamp Beam Setter

DVSA Approved for use in testing stations. Fixed aiming screen. Internal analogue LUX meter for accurate light intensity measurement. Suitable for all types of cars and light commercial vehicles. Available either with rails for MOT use or without rails for bodyshop use. Supplied with instructions and certificate of approval (MOT version).

GBP 405.09

1

Sealey SS51P10 Warning Safety Sign - MOT Testing Station - Rigid Plastic - Pack of 10

Rigid plastic. 600 x 625mm. Suitable for use in office, workshop and all other commercial and retail environments. Pack of 10.

GBP 198.70

1

Sealey TA319 Digital Insulation Tester

Specially designed for testing insulation on high voltage cables. Suitable for hybrid and electric vehicles. Supplied with test leads, batteries and storage case. Conforms to EN61010 CAT III (1000V).

GBP 219.00

1

Sealey CV0011 Cooling System Pressure Test Kit 7pc - Commercial

Cooling system pressure testing kit, designed for commercial vehicles. Pressure pump with gauge quickly identifies faulty gaskets, radiators, weeping pipes and other causes of coolant loss.

GBP 295.10

1

3M Fit Test Kit, Qualitative, Sweet

Cost effective, simple to use fit testing kit for FFP1, FFP2, FFP3 filtering facepieces and half mask respirators. No calibration of equipment needed and test operator can be self-taught. Supplied with sweet test solution.Test kits and accessories designed to help your organisation meet regulatory fit testing requirements for respirators. The products can be used to check face to respirator seal on any particulate respirator or gas/vapour respirator with a particulate prefilter.

GBP 200.97

1

SIP 03568 12v/24v T11 Battery Tester and Analyzer

The SIP T11 12v/24v Battery Tester & System Analyzer is a compact microprocessor-controlled electric system and battery tester for Lead Acid, SLA, AGM, GEL, WET, VRLA, CaCa, EFB, and LiFePO4 batteries, offering starter, alternator, and mass ground testing. Suitable for ATVs, motorcycles, cars, vans, and trucks.

GBP 359.00

1

Sealey VSE204 Diesel Engine Compression Test Kit

Ø60mm Gauge with heavy-duty rubber bumper, 400mm of hose and quick connector. Suitable for testing cars and light commercial vehicles with direct or indirect injection. Pressure relief valve allows repeated on-vehicle tests. Includes 90° coupling adaptor for limited access applications. Supplied in storage case.

GBP 207.04

1

Sealey VSE3156 Diesel & Petrol Compression, Leakage & TDC Kit

A comprehensive kit for testing the compression and leakage on both diesel and petrol vehicles. Features 600psi gauge with large rubber bumper, straight and right angled quick connect fittings and an extensive range of spark/glow plug and injector adaptors. Includes TDC finder, ideal for use when the engine has no crankshaft timing marks. Supplied in storage case. See instructions on Sealey website for complete vehicle applications.

GBP 356.00

1

Sealey VSE3155 Petrol & Diesel - Master Compression Test Kit

A comprehensive kit for testing the compression on both diesel and petrol vehicles. Features 600psi gauge with large rubber bumper, straight and right angled quick connect fittings and an extensive range of spark/glow plug and injector adaptors. This kit will cover most modern car, van, truck, bus, agricultural and marine engines. Supplied in storage case. See instructions on Sealey website for complete vehicle applications.

GBP 310.90

1

Sealey VS932 Air Brake Test Gauge Set - Commercial

Locate problems relating to commercial vehicle air brake pressure quickly and easily. Three gauges provide more accurate diagnosis when testing and locating faults along the braking system. Suitable for use at the roadside or in the workshop. Features three large 0-20bar(0-300psi) gauges with rubber bumper. Supplied with male/female couplings, three hoses and a wire brush in storage case.

GBP 320.00

1

Sealey TA203 Digital Automotive Multimeter 15-Function Bar Graph/PC Link

Extra-large, high-contrast LCD display with 36mm high digital read-out, bar graph and back light. Durable case with probe storage and integral stand, suitable for the toughest workshop conditions. Features millisecond pulse-width function for accurate measurement of fuel injection systems. Includes auto-ranging, data-hold and auto-power-off. Bar-graph is essential for the correct testing of lambda sensors. Supplied with inductive coupler (IC) with adjustable sensitivity, for fast reading of engine rpm, test leads (probe and clip) and thermocouple plus USB interface cable and Windows ME/XP/Vista software for downloading data to PC.

GBP 208.70

1

TB Davies 1530-040 FireFold Loft Ladder

Built to the same standard and specification as the LuxFold, but designed to withstand fire for up to 30 minutes (Ei230) fire rating. Suitable for properties with more than 3 floors or passive houses that require a fire rated loft ladder. Fitted with a continuous seal to keep draughts out. The ladder is fully assembled, just requires final installation tweaks. Timber materials used are certified PEFC and from sustainably managed forests, recycled and controlled sources [PEFC 16-37-2313]. Note, that in testing the fire door reached 45+ minutes before flames breached the door.

GBP 416.95

1

Sealey TA304 Digital Automotive Analyser 15-Function with Inductive Coupler/Infrared Temperature Probe

15-Function, auto-ranging automotive diagnostic multimeter with IR thermometer attachment. Combination digital/bar graph display gives accurate indication of component outputs. Large, easy-to-read high contrast display with bright, white back light. Workshop-tough, durable case with integral stand and auto-power shut-off. High-speed processing circuitry reads standard automotive parameters including duty cycle and pulse width making this tool ideal for testing fuel injection systems. Features auto-ranging, and data-hold functions with overload protection on all ranges. Includes relative functions including min./max. and peak hold. Supplied with inductive coupler, infrared temperature probe, test probes and thermocouple in storage case.

GBP 238.77

1

BGNP2 Rubber Clamp Intake for Cars

The BGNP2 100mm to 140mmø Rubber Intake is perfect for use with all ARH, ARHV, and ARHM Hose Reel types, and specifically designed for cars, motorcycles, and other small vehicles. • 100mmø to 140mmø BGNP2 rubber intake • Membrane top for use with motorcycles and cars • Designed for ARH, ARHV, and ARHM hose reels • Perfect with the EV15 extraction fan / motor

GBP 301.00

1

BGNT Rubber & Membrane Intake for Trucks

The BGNT 150mm to 180mmø Rubber Intake is designed for use with all ARH, ARHV, and ARHM Hose Reel types, and is perfect for use with vans, trucks, and a range of larger vehicles. • 150mmø to 180mmø BGNT rubber intake • Membrane top for use with both vans and trucks • Designed for ARH, ARHV, and ARHM hose reels • Perfect with the EV18 extraction fan / motor

GBP 239.00

1

SIP 72815 Pump Assembly for 08923

SIP Industrial Pump Assembly for 08923

GBP 217.62

1

BGNP2 Rubber Clamp Intake for Trucks

The BGNP4 150mm to 180mmø Rubber Intake is perfect for use with all ARH, ARHV, and ARHM Hose Reel types, and specifically designed vans, trucks, and a range of larger vehicles. • 150mmø to 180mmø BGNP4 rubber intake • Membrane top for use with both vans and trucks • Designed for ARH, ARHV, and ARHM hose reels • Perfect with the EV18 extraction fan / motor

GBP 418.00

1

Sealey SM3002ST Stand for SM3002, SM2502, SM2503

One of a comprehensive range of high quality accessories for Model No's SM3002, SM2502 and SM2503 metalworking lathes.Floor stand with sliding tool shelf suitable for Model No's SM3002, SM2502 and SM2503.

GBP 187.00

1

Karcher Filter 3-level replacement for AFG100

GBP 229.88

1

Karcher Roller Brush Black Complete for BR 40/10

Very hard, for extremely sticky dirt and for deep cleaning, for unsensitive surfaces only.

GBP 239.22

1

Karcher Roller Brush (Green) for BR40/10

A Karcher hard roller brush in the colour green for the Karcher BR40/10. Wear-resistant star-wheel mechanism. For heavily soiled floors and basic cleaning. Bristles made from polyamide with silicon carbide. 400mm length, 0.6mm thick and 20mm long. 

GBP 219.34

1

Karcher Inlet Combs for BR 47/35 ESC

Inlet combs designed for use on KONE and O&K escalators, for use with the Karcher BR 47/35 ESC.

GBP 204.37

1

Karcher Pad Disk Complete Strong for BD 43

Required for use of melamine pads, but can also be used for normal pads. Pad drive board with lots of extra hooks for holding pads. Extra-strong hold of the pad at the pad drive board of the cleaning head D 43.

GBP 177.10

1

SIP 05009 TIG Torch For TIG Welder

SIP 05009 SR26V TIG Torch for use with the Weldmate P212 Arc / Tig Welder 05154 .

GBP 221.89

1

Brand

Colour

Merchant

Price (EUR)