ProfitSpring | B2B PPC Agency

Balustrade Newel To Hand Rail L-Shape Bracket - 50mm x 40mm

This bracket secures the Handrail to the Newels on the outer sections of the balustrade systems. Another element of security and stability, the bracket is screwed onto the rail and the post in order to fix the two components.

GBP 1.15

1

Weatherboard Cladding Butt Joint - Sand

The Weatherboard Cladding Butt Joint Trim is to be used to join boards together and when used breaks up the line a little bit on larger installations covering the joint in a staggered effect.The butt joint is usually used as an alternative to a centre joint trim which produces a straight line joint.The Butt joint is available across the Weatherboard Cladding range including White, Colonial Blue, Storm Grey, Slate Grey, Sage Green and Sand and is to be used in conjunction the 170mm Weatherboard panel.

GBP 3.56

1

Weatherboard Cladding Butt Joint - Storm Grey

The Weatherboard Cladding Butt Joint Trim is to be used to join boards together and when used breaks up the line a little bit on larger installations covering the joint in a staggered effect.The butt joint is usually used as an alternative to a centre joint trim which produces a straight line joint.The Butt joint is available across the Weatherboard Cladding range including White, Colonial Blue, Storm Grey, Slate Grey, Sage Green and Sand and is to be used in conjunction the 170mm Weatherboard panel.

GBP 3.56

1

Weatherboard Cladding Butt Joint - White

The Weatherboard Cladding Butt Joint Trim is to be used to join boards together and when used breaks up the line a little bit on larger installations covering the joint in a staggered effect.The butt joint is usually used as an alternative to a centre joint trim which produces a straight line joint.The Butt joint is available across the Weatherboard Cladding range including White, Colonial Blue, Storm Grey, Slate Grey, Sage Green and Sand and is to be used in conjunction the 170mm Weatherboard panel.

GBP 3.56

1

Weatherboard Cladding Butt Joint - Colonial Blue

The Weatherboard Cladding Butt Joint Trim is to be used to join boards together and when used breaks up the line a little bit on larger installations covering the joint in a staggered effect.The butt joint is usually used as an alternative to a centre joint trim which produces a straight line joint.The Butt joint is available across the Weatherboard Cladding range including White, Colonial Blue, Storm Grey, Slate Grey, Sage Green and Sand and is to be used in conjunction the 170mm Weatherboard panel.

GBP 3.56

1

Dry Verge Eaves Starter - Terracota

This universal starter, or eaves closure as it is often referred to as, is used at the eaves to ensure that the system is fully closed at the bottom of the verge.The first dry verge unit is secured onto the eaves starter via a clip that engages with the outer fins of the eaves starter unit.

GBP 3.29

1

Dry Verge Eaves Starter - Grey

This universal starter, or eaves closure as it is often referred to as, is used at the eaves to ensure that the system is fully closed at the bottom of the verge.The first dry verge unit is secured onto the eaves starter via a clip that engages with the outer fins of the eaves starter unit.

GBP 3.29

1

Dry Verge Eaves Starter - Brown

This universal starter, or eaves closure as it is often referred to as, is used at the eaves to ensure that the system is fully closed at the bottom of the verge.The first dry verge unit is secured onto the eaves starter via a clip that engages with the outer fins of the eaves starter unit.

GBP 3.29

1

FloPlast Shiplap Cladding Butt Joint - 150mm White

The 150mm UPVC Shiplap Cladding Butt Joint Trim is to be used to join boards together and when used, breaks up the line a little bit on larger installations covering the joint in a staggered effect.The butt joint is usually used as an alternative to a centre joint trim which produces a straight line joint.The Shiplap Cladding Butt joint is available in White, Anthracite Grey, Black Ash, Golden Oak or Rosewood and is to be used with the 150mm Shiplap Cladding boards.For more information on cladding joints please take a look at our short video:

GBP 1.42

1

Weatherboard Cladding Butt Joint - Anthracite Grey

The Weatherboard Cladding Butt Joint Trim is to be used to join boards together and when used breaks up the line a little bit on larger installations covering the joint in a staggered effect.The butt joint is usually used as an alternative to a centre joint trim which produces a straight line joint.The Butt joint is available across the Weatherboard Cladding range including White, Colonial Blue, Storm Grey, Slate Grey, Sage Green, Misty Grey, Pale Gold, Sand and Anthracite Grey and is to be used in conjunction the 170mm Weatherboard panel.

GBP 3.56

1

Bullnose Fascia Internal Corner - 300mm x 53mm White

Our Bullnose fascia is manufactured by Freefom, it is 18mm thick and it comes in a range of widths from 150mm to 250mm.This corner is 300mm long.Bullnose fascia boards can be fixed directly to the rafter ends without the need for a backing board, itandnbsp;should be fixed using 2 x 65mm polytop nails at each rafter (maximum spacing 600mm).The rear of the board is rebated at the bottom edge to accept a soffit board.andnbsp;

GBP 2.93

1

Bullnose Fascia Large End Cap - 300mm x 25mm White

Our Bullnose fascia is manufactured by Freefom, it is 18mm thick and it comes in a range of widths from 150mm to 250mm.This end cap is 313mm long overall, with a 300mm useable length (one curved edge).Bullnose fascia boards can be fixed directly to the rafter ends without the need for a backing board, itandnbsp;should be fixed using 2 x 65mm polytop nails at each rafter (maximum spacing 600mm).The rear of the board is rebated at the bottom edge to accept a soffit board.andnbsp;

GBP 2.54

1

Bullnose Fascia End Cap Pair - 100mm x 25mm White

Our Bullnose fascia is manufactured by Freefom, it is 18mm thick and it comes in a range of widths from 150mm to 250mm.This end cap is 100mm long overall, consisting of a pair of end caps.Bullnose fascia boards can be fixed directly to the rafter ends without the need for a backing board, itandnbsp;should be fixed using 2 x 65mm polytop nails at each rafter (maximum spacing 600mm).The rear of the board is rebated at the bottom edge to accept a soffit board.andnbsp;

GBP 1.34

1

Fascia End Cap - 315mm White

End caps are used to seal off the cellular core of any cut board that is exposed, ie. where it is not covered by a joint or corner trim.End caps can be cut to size with a hacksaw as required. They are fixed to the end of the board using our industrial superglue and activator.

GBP 3.00

1

White Fascia Capping Board End Cap - 50mm

End caps are used to seal off the cellular core of any cut board that is exposed, ie. where it is not covered by a joint or corner trim. 50mm end caps are most commonly used when the board itself is being used as an internal window board rather than a fascia board.End caps can be cut to size with a hacksaw as required. They are fixed to the end of the board using our industrial superglue and activator.

GBP 1.05

1

Black Ash Fascia Capping Board End Cap - 50mm

End caps are used to seal off the cellular core of any cut board that is exposed, ie. where it is not covered by a joint or corner trim.50mm end caps are most commonly used when the board itself is being used as an internal window board rather than a fascia board.End caps can be cut to size with a hacksaw as required. They are fixed to the end of the board using our industrial superglue and activator.

GBP 3.81

1

Rosewood Fascia Capping Board End Cap - 50mm

End caps are used to seal off the cellular core of any cut board that is exposed, ie. where it is not covered by a joint or corner trim.50mm end caps are most commonly used when the board itself is being used as an internal window board rather than a fascia board.End caps can be cut to size with a hacksaw as required. They are fixed to the end of the board using our industrial superglue and activator.

GBP 3.81

1