51 results (0,17076 seconds)

Show all filters

Brand

Show all

Colour

Show all

Size

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Prochem R603 Stone Seal - 5 Litre

Prochem R603 Stone Seal - 5 Litre

Prochem R603 Stone Seal is a Durable water and oil resistant penetrating sealer for concrete, brick, grout, terracotta, limestone, sandstone, decorative tiling and other porous or mineral floors and surfaces. Stone Seal provides an invisible protective barrier against oil and water on porous stone surfaces. Stone Seal can be used on internal and external stone floors, subject to testing. - Water-based oil & water resistant sealer for concrete, stone, terracotta, brick and other mineral & porous flooring surfaces. - Does not change the appearance of natural stone. - Apply by brush, roller or mop. - Clear liquid with mild acrylic odour. Directions - For professional and industrial use only. - Stone Seal is ready-to-use. Do not dilute further. - Coverage is approximately 150 to 200m2 per 5 litres, depending upon porosity of floor. - Always pre-test surface to be treated before proceeding and allow treatment to dry fully before testing and assessing suitability for full application. - Apply Stone Seal solution by roller, mop or saturated soft brush. - Do not apply by spray. - For indoor use ensure there is adequate ventilation. - Allow surface to dry completely before use. - Do not allow product to freeze. Rinse application equipment in water. pH Values - pH Concentrate: 5.0 - pH Diluted: Not applicable Please Note : Due to geographical locations we are unable to deliver to Highlands

GBP 79.99
1

Blue Horizons Total Alkalinity Reducer 5 Litre 5 Litre

Blue Horizons Total Alkalinity Reducer 5 Litre 5 Litre

Blue Horizons Total Alkalinity Reducer is a liquid acid used for rapidly reducing the total alkalinity of swimming pool water. Apply when the total alkalinity is above the recommended 150mg/l (ppm) maximum. Blue Horizons Total Alkalinity Reducer Instructions - Important This product should be handled with care. - Blue Horizons Total Alkalinity Reducer should be carefully slug dosed into the deep end of the pool with the pump(s) running. - If large quantities are required, it may be necessary to apply over a number of days while testing the total alkalinity between each application. - After completing the treatment, test and adjust the pH level if necessary. | Pool Volume | | Dose Rates to reduce TA by | | | --- | --- | --- | --- | | M3 (Ltrs) | Gallons | 10mg/l | 25mg/l | | 4.55 (4,545) | 1,000 | 100ml | 250ml | | 11.36 (11,364) | 2,500 | 250ml | 625ml | | 22.73 (22,730) | 5,000 | 500ml | 1.25ltrs | | 45.45 (45,455) | 10,000 | 1.00ltrs | 2.50ltrs | | 68.18 (68,175) | 15,000 | 1.5ltrs | 3.75ltrs | Please Note : Due to geographical locations we are unable to deliver to Highlands

GBP 26.99
1

Watco Concrete Floor Paint White 5L Pure White

Watco Concrete Floor Paint White 5L Pure White

Images for illustration purposes only Our unique formula is based on a blend of resins and polyurethane, which has produced a Best in Class single pack paint for general use. This attractive, hard-wearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this Best Ever Formulation to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. Recommended areas of use Production Areas Warehouses Workshops Features Professional quality, single pack polyurethane coating Transforms and dustproofs drab, stained concrete Ideal for identifying production and storage areas and traffic aisles Easy to use and easy to keep clean Superior performance demonstrated by ISO testing to CE mark EN 1504-2 High Gloss, Matt & Anti Slip versions available Available in 190 RAL colours Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 24 hours 16 hours 48 hours 72 hours 20C 16 hours 10 hours 24 hours 36 hours 30C 16 hours 6 hour 24 hours 36 hours Light Traffic: Foot, trolley, pallet truck, occasional forklift

GBP 133.99
1

6x Watco Concrete Floor Paint White 5L Pure White Cfpawhi

6x Watco Concrete Floor Paint White 5L Pure White Cfpawhi

Images for illustration purposes only Our unique formula is based on a blend of resins and polyurethane, which has produced a Best in Class single pack paint for general use. This attractive, hard-wearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this Best Ever Formulation to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. Recommended areas of use Production Areas Warehouses Workshops Features Professional quality, single pack polyurethane coating Transforms and dustproofs drab, stained concrete Ideal for identifying production and storage areas and traffic aisles Easy to use and easy to keep clean Superior performance demonstrated by ISO testing to CE mark EN 1504-2 High Gloss, Matt & Anti Slip versions available Available in 190 RAL colours Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 24 hours 16 hours 48 hours 72 hours 20C 16 hours 10 hours 24 hours 36 hours 30C 16 hours 6 hour 24 hours 36 hours Light Traffic: Foot, trolley, pallet truck, occasional forklift

GBP 719.94
1

Prochem D488 Powerclean 5L - BDP311-5

Prochem D488 Powerclean 5L - BDP311-5

Prochem D488 Powerclean is a highly concentrated alkaline cleaner designed for many different types of cleaning jobs, ranging from the cleaning of small appliances to removal of grease from floors and industrial machinery. Powerclean is suitable for cleaning concrete, linoleum, ceramic tiles, painted walls, restaurant kitchen floors, vinyl surfaces, oven hoods and any washable surface subject to pre-testing. - Heavy duty alkaline general purpose & restoration cleaner. - Wide range, high strength alkaline cleaner for oils, grease and heavy soiling. - Suitable for use in pressure washers, floor scrubber-driers and rotary scrubbing machines. - Dark blue liquid with light pine and mint fragrance. Directions - For professional and industrial use only. - Always pre-test surface with diluted solution before proceeding. - Not recommended for use on aluminium, wood, carpet, fabric and polished or delicate surfaces. Use with caution on painted surfaces and plastics. - Light cleaning: Mix 10 to 30ml Powerclean per litre of hot water (1 to 50). - General cleaning: Mix 30 to 60ml Powerclean per litre of hot water (1 to 25). - Heavy duty: Mix up to 250ml Powerclean per litre of hot water for fire restoration and degreasing (1 to 4). - Apply solution by sprayer or applicator, then scrub to remove soil. - Rinse surface thoroughly with clean water or Prochem acidic rinse solution. pH Values - pH Concentrate: 13.0 - pH Diluted: 12.0 Please Note : Due to geographical locations we are unable to deliver to Highlands

GBP 62.99
1

Chemspec Unsmoke Unsoot Number 1 Encapsulate & Deodourizing Sealer 3.78L 3.78 Litre

Chemspec Unsmoke Unsoot Number 1 Encapsulate & Deodourizing Sealer 3.78L 3.78 Litre

Unsmoke Unsoot? #1 Encapsulant Forms a clear, encapsulating film to contain particulates and dust. Unsoot #1?s long-lasting barrier helps prevent the release of particulates, thereby helping to improve indoor air quality and occupant comfort after restoration. Use on structural wood, or for sealing duct work and ceiling plenums after fires, smoke damage, or oil burner puff-backs. Protective coating seals surfaces, encapsulates particulates. Zero flame spread and smoke generation in ASTM E84 testing Any number of events in a building can generate soot and particulate contamination, the most well known of which are structural fires and furnace malfunctions known as ?puff backs?. The cleaning process can be frustrated by air currents moving this particulate contamination from soiled to clean surfaces. An additional complication is that soot has extremely high surface area and can adsorb strong odors. Unsoot #1 forms a protective coating that encapsulates these contaminants. Unsoot #1 can also be combined with odor control agents to give this product additional odor control capability. Use Instructions Mixing: Dilute 1 part Unsoot #1 with 4 parts water. Application: Follow Unsmoke guidelines for air handling systems cleaning and decontamination For complete instructions and safety data for this product, refer to the Use Guide and Material Safety Data Sheet, available under the Documents tab. Formulation - Concentrate One gallon (3.8L) bottles Flash point - 217? F | 102.7? C Appearance - Milky white liquid pH - 4.9 Specific gravity - 1.05 Please Note : Due to geographical locations we are unable to deliver to Highlands

GBP 59.99
1

AMPERE DEUTSCHLAND GMBH Industry Floor Paint Ground Marking Paint, Capacity 5 L, Black

AMPERE DEUTSCHLAND GMBH Industry Floor Paint Ground Marking Paint, Capacity 5 L, Black

Industry Floor Paint ground marking paint, capacity 5 l, black. Colour = black. Contents = 5 l. Hazard class = GHS02, GHS07, GHS08, GHS09. Product type = floor paints. For indoor use. Easy to use. Hardwearing and durable. Ground marking paint - for indoor use. Extremely easy to work with, lends the surface a satin finish Ideally suited for use on industrial floors, in warehouses, utility rooms, garages, car parks and much more Industry Floor Paint ground marking paint - Easy to clean - Does not yellow - Chemical resistant - VOC: max. 500 g/l - Application temperature: +10 C to +30 C - Application by means of a short-haired roller - Thinning and tool cleaning: Solvent Floor Paint thinner (see accessories) - Drying time: dries in approx. 1 hour, can be painted over in approx. 8 hours Yield: up to 10 m/l per coat ATTENTION: prior to application, the floor should be cleaned and any dust be removed. IMPORTANT INFORMATION ON INDUSTRY FLOOR PAINT Test the paint prior to application, as adhesion can vary according to the road surface and weather conditions. When marking sealed or treated surfaces, we recommend testing the paint for compatibility, drying time and adhesion in each case. The surface may need to be briefly sanded back or a primer may need to be used to ensure optimal adhesion. If the surface has not been prepared accordingly, the marking paint may peel off after a short period of time.

GBP 299.99
1

AMPERE DEUTSCHLAND GMBH Industry Floor Paint Ground Marking Paint, Capacity 5 L, Red

AMPERE DEUTSCHLAND GMBH Industry Floor Paint Ground Marking Paint, Capacity 5 L, Red

Industry Floor Paint ground marking paint, capacity 5 l, red. Colour = red. Contents = 5 l. Hazard class = GHS02, GHS07, GHS08, GHS09. Product type = floor paints. For indoor use. Easy to use. Hardwearing and durable. Ground marking paint - for indoor use. Extremely easy to work with, lends the surface a satin finish Ideally suited for use on industrial floors, in warehouses, utility rooms, garages, car parks and much more Industry Floor Paint ground marking paint - Easy to clean - Does not yellow - Chemical resistant - VOC: max. 500 g/l - Application temperature: +10 C to +30 C - Application by means of a short-haired roller - Thinning and tool cleaning: Solvent Floor Paint thinner (see accessories) - Drying time: dries in approx. 1 hour, can be painted over in approx. 8 hours Yield: up to 10 m/l per coat ATTENTION: prior to application, the floor should be cleaned and any dust be removed. IMPORTANT INFORMATION ON INDUSTRY FLOOR PAINT Test the paint prior to application, as adhesion can vary according to the road surface and weather conditions. When marking sealed or treated surfaces, we recommend testing the paint for compatibility, drying time and adhesion in each case. The surface may need to be briefly sanded back or a primer may need to be used to ensure optimal adhesion. If the surface has not been prepared accordingly, the marking paint may peel off after a short period of time.

GBP 299.99
1

AMPERE DEUTSCHLAND GMBH Industry Floor Paint Ground Marking Paint, Capacity 5 L, Yellow

AMPERE DEUTSCHLAND GMBH Industry Floor Paint Ground Marking Paint, Capacity 5 L, Yellow

Industry Floor Paint ground marking paint, capacity 5 l, yellow. Colour = yellow. Contents = 5 l. Hazard class = GHS02, GHS07, GHS08, GHS09. Product type = floor paints. For indoor use. Easy to use. Hardwearing and durable. Ground marking paint - for indoor use. Extremely easy to work with, lends the surface a satin finish Ideally suited for use on industrial floors, in warehouses, utility rooms, garages, car parks and much more Industry Floor Paint ground marking paint - Easy to clean - Does not yellow - Chemical resistant - VOC: max. 500 g/l - Application temperature: +10 C to +30 C - Application by means of a short-haired roller - Thinning and tool cleaning: Solvent Floor Paint thinner (see accessories) - Drying time: dries in approx. 1 hour, can be painted over in approx. 8 hours Yield: up to 10 m/l per coat ATTENTION: prior to application, the floor should be cleaned and any dust be removed. IMPORTANT INFORMATION ON INDUSTRY FLOOR PAINT Test the paint prior to application, as adhesion can vary according to the road surface and weather conditions. When marking sealed or treated surfaces, we recommend testing the paint for compatibility, drying time and adhesion in each case. The surface may need to be briefly sanded back or a primer may need to be used to ensure optimal adhesion. If the surface has not been prepared accordingly, the marking paint may peel off after a short period of time.

GBP 299.99
1

Prochem Coffee Stain Remover 5 Litre 5 Litre

Prochem Coffee Stain Remover 5 Litre 5 Litre

Prochem Coffee Stain Remover is a specially formulated stain remover for the direct treatment of coffee, tea, tannin, beer, water marks and many other yellow and brown discolourations on carpets and fabrics. Coffee Stain Remover can be used on synthetic and natural fibre carpets, fabrics and other surfaces, subject to pre-testing. Features: - Coffee, tea and browning stain remover for carpets, fabrics and most surfaces. - Use for watermarks and other yellow and brown discolorations on carpet and fabric. - Ready-to-use. - Clear liquid with lemon fragrance. Directions - For professional and industrial use only. - Always pre-test carpets, fabrics and other surfaces to be treated with a small amount of Coffee Stain Remover in an inconspicuous area before proceeding. Check for dye stability, colour change and texture change. Some fabrics and dyes may be sensitive to water or acidic solutions. - Coffee Stain Remover is ready-to-use. Do not mix with other cleaning agents. - Apply to affected area by sprayer, then blot with clean white towel, working from the outside to the centre of large stains. - For difficult stains, re-apply and leave for 5 to 15 minutes, then rinse with clean water. - For severe stains, use B175 Browning Prescription with an equal part of water and leave for a longer period before rinsing. - Some old tea and coffee stains, particularly on natural fibres such as wool and cotton may be permanent. pH Values - pH: 2.5

GBP 29.99
1

Watco Heavy Duty Traffic Paint Yellow, 5L

Watco Heavy Duty Traffic Paint Yellow, 5L

Images for illustration purposes onlyWatco Heavy Duty Traffic Paint is a tough, two pack, solvent based epoxy resin coating for use in heavily trafficked concrete or asphalt, such as car parks, driveways and vehicle access areas.This versatile, exceptionally strong coating contains a solvent which bites into asphalt surfaces, and slightly penetrates concrete surfaces for the maximum possible adhesion without the need (generally) for a primer. Heavy Duty Traffic Paint carries CE Mark EN 1504-2 and has impressive test results for slip resistance, hardness, abrasion, adhesion and impact resistance.The high pigment level in this smooth finish exterior coating offers excellent covering power to keep your surfaces looking their best for longer. For areas where safety underfoot is required, Heavy Duty Anti Slip Traffic Paint is also available.Recommended areas of useCar parksDrivewaysTraffic routes and pedestrian walkwaysVehicle access areasColour coding and highlighting hazardous areasFeaturesExceptionally strong, two pack, solvent based epoxy resinTransforms, dull, drab asphalt, tarmac and concrete in heavy wear areasColours and protects with just one coatHigh pigment level offers excellent hiding powerSuitable for both asphalt and concreteExcellent chemical resistanceSuperior performance demonstrated by ISO testing to CE Mark EN1504-2Drying Time Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 12 hours 6 hours 16 hours 36 hours 7 days20C 6 hours 4 hours 8 hours 24 hours 7 days30C 6 hours 3 hour 8 hours 24 hours 7 daysLight Traffic: FootMedium Traffic: Cars, trolley, pallet truck

GBP 199.99
1

6x Watco Concrete Floor Paint Bef Anti Slip Haz Yellow 5L ZincYellow Cfpaashzyw

6x Watco Concrete Floor Paint Bef Anti Slip Haz Yellow 5L ZincYellow Cfpaashzyw

Images for illustration purposes only Our unique formula is based on a blend of resins and polyurethane, which produced a Best in Class single pack paint for general use. This attractive, hardwearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. Watco Concrete Floor Paint Anti Slip provides a good level of slip resistance and the anti slip particles are pre-blended which makes it easier to achieve a uniform finish. All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this Best Ever Formulation to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. Recommended areas of use Production Areas Warehouses Workshops Features Professional quality, single pack polyurethane coating Transforms and dustproofs drab, stained concrete Ideal for identifying production and storage areas and traffic aisles Easy to use and easy to keep clean Superior performance demonstrated by ISO testing to CE mark EN 1504-2 High Gloss, Matt & Anti Slip versions available Available in 190 RAL colours Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 24 hours 16 hours 48 hours 72 hours 20C 16 hours 10 hours 24 hours 36 hours 30C 16 hours 6 hour 24 hours 36 hours Light Traffic: Foot, trolley, pallet truck, occasional forklift

GBP 743.94
1

Watco Concrete Floor Paint Bef Matt Light Grey 5L Agate Grey Cfpamattlgy

Watco Concrete Floor Paint Bef Matt Light Grey 5L Agate Grey Cfpamattlgy

Images for illustration purposes only Our unique formula is based on a blend of resins and polyurethane, which has produced a Best in Class single pack paint for general use. This attractive, hardwearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. Watco Matt Concrete Floor Paint helps to disguise imperfections in older floors and reduce reflection or glare. Its still easy to keep clean and has all the benefits of the high gloss finish. All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this Best Ever Formulation to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. Recommended areas of use Production Areas Warehouses Workshops Features Professional quality, single pack polyurethane coating Transforms and dustproofs drab, stained concrete Ideal for identifying production and storage areas and traffic aisles Easy to use and easy to keep clean Superior performance demonstrated by ISO testing to CE mark EN 1504-2 High Gloss, Matt & Anti Slip versions available New formulations to RAL colour shades Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 24 hours 16 hours 48 hours 72 hours 20C 16 hours 10 hours 24 hours 36 hours 30C 16 hours 6 hour 24 hours 36 hours Light Traffic: Foot, trolley, pallet truck, occasional forklift

GBP 133.99
1

6x Watco Concrete Floor Paint Bef Matt Light Grey 5L Agate Grey

6x Watco Concrete Floor Paint Bef Matt Light Grey 5L Agate Grey

Images for illustration purposes only Our unique formula is based on a blend of resins and polyurethane, which has produced a Best in Class single pack paint for general use. This attractive, hardwearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. Watco Matt Concrete Floor Paint helps to disguise imperfections in older floors and reduce reflection or glare. Its still easy to keep clean and has all the benefits of the high gloss finish. All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this Best Ever Formulation to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. Recommended areas of use Production Areas Warehouses Workshops Features Professional quality, single pack polyurethane coating Transforms and dustproofs drab, stained concrete Ideal for identifying production and storage areas and traffic aisles Easy to use and easy to keep clean Superior performance demonstrated by ISO testing to CE mark EN 1504-2 High Gloss, Matt & Anti Slip versions available New formulations to RAL colour shades Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 24 hours 16 hours 48 hours 72 hours 20C 16 hours 10 hours 24 hours 36 hours 30C 16 hours 6 hour 24 hours 36 hours Light Traffic: Foot, trolley, pallet truck, occasional forklift

GBP 719.94
1

Watco Concrete Floor Paint Bef Anti Slip Blue Grey 5L Squirrel Grey

Watco Concrete Floor Paint Bef Anti Slip Blue Grey 5L Squirrel Grey

Images for illustration purposes only Our unique formula is based on a blend of resins and polyurethane, which produced a Best in Class single pack paint for general use. This attractive, hardwearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. Watco Concrete Floor Paint Anti Slip provides a good level of slip resistance and the anti slip particles are pre-blended which makes it easier to achieve a uniform finish. All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this Best Ever Formulation to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. Recommended areas of use Production Areas Warehouses Workshops Features Professional quality, single pack polyurethane coating Transforms and dustproofs drab, stained concrete Ideal for identifying production and storage areas and traffic aisles Easy to use and easy to keep clean Superior performance demonstrated by ISO testing to CE mark EN 1504-2 High Gloss, Matt & Anti Slip versions available Available in 190 RAL colours Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 24 hours 16 hours 48 hours 72 hours 20C 16 hours 10 hours 24 hours 36 hours 30C 16 hours 6 hour 24 hours 36 hours Light Traffic: Foot, trolley, pallet truck, occasional forklift

GBP 139.99
1

6x Watco Concrete Floor Paint Bef Anti Slip Dark Grey 5L Slate Grey Cfpaasdgy

6x Watco Concrete Floor Paint Bef Anti Slip Dark Grey 5L Slate Grey Cfpaasdgy

Images for illustration purposes only Our unique formula is based on a blend of resins and polyurethane, which produced a Best in Class single pack paint for general use. This attractive, hardwearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. Watco Concrete Floor Paint Anti Slip provides a good level of slip resistance and the anti slip particles are pre-blended which makes it easier to achieve a uniform finish. All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this Best Ever Formulation to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. Recommended areas of use Production Areas Warehouses Workshops Features Professional quality, single pack polyurethane coating Transforms and dustproofs drab, stained concrete Ideal for identifying production and storage areas and traffic aisles Easy to use and easy to keep clean Superior performance demonstrated by ISO testing to CE mark EN 1504-2 High Gloss, Matt & Anti Slip versions available Available in 190 RAL colours Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 24 hours 16 hours 48 hours 72 hours 20C 16 hours 10 hours 24 hours 36 hours 30C 16 hours 6 hour 24 hours 36 hours Light Traffic: Foot, trolley, pallet truck, occasional forklift

GBP 743.94
1

6x Watco Concrete Floor Paint Bef Anti Slip Tile Red 5L Cfpaastrd

6x Watco Concrete Floor Paint Bef Anti Slip Tile Red 5L Cfpaastrd

Images for illustration purposes only Our unique formula is based on a blend of resins and polyurethane, which produced a Best in Class single pack paint for general use. This attractive, hardwearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. Watco Concrete Floor Paint Anti Slip provides a good level of slip resistance and the anti slip particles are pre-blended which makes it easier to achieve a uniform finish. All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this Best Ever Formulation to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. Recommended areas of use Production Areas Warehouses Workshops Features Professional quality, single pack polyurethane coating Transforms and dustproofs drab, stained concrete Ideal for identifying production and storage areas and traffic aisles Easy to use and easy to keep clean Superior performance demonstrated by ISO testing to CE mark EN 1504-2 High Gloss, Matt & Anti Slip versions available Available in 190 RAL colours Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 24 hours 16 hours 48 hours 72 hours 20C 16 hours 10 hours 24 hours 36 hours 30C 16 hours 6 hour 24 hours 36 hours Light Traffic: Foot, trolley, pallet truck, occasional forklift

GBP 743.94
1

Watco Concrete Floor Paint Bef Anti Slip Dark Grey 5L Slate Grey

Watco Concrete Floor Paint Bef Anti Slip Dark Grey 5L Slate Grey

Images for illustration purposes only Our unique formula is based on a blend of resins and polyurethane, which produced a Best in Class single pack paint for general use. This attractive, hardwearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. Watco Concrete Floor Paint Anti Slip provides a good level of slip resistance and the anti slip particles are pre-blended which makes it easier to achieve a uniform finish. All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this Best Ever Formulation to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. Recommended areas of use Production Areas Warehouses Workshops Features Professional quality, single pack polyurethane coating Transforms and dustproofs drab, stained concrete Ideal for identifying production and storage areas and traffic aisles Easy to use and easy to keep clean Superior performance demonstrated by ISO testing to CE mark EN 1504-2 High Gloss, Matt & Anti Slip versions available Available in 190 RAL colours Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 24 hours 16 hours 48 hours 72 hours 20C 16 hours 10 hours 24 hours 36 hours 30C 16 hours 6 hour 24 hours 36 hours Light Traffic: Foot, trolley, pallet truck, occasional forklift

GBP 139.99
1

Watco Concrete Floor Paint Bef Anti Slip Tile Red 5L

Watco Concrete Floor Paint Bef Anti Slip Tile Red 5L

Images for illustration purposes only Our unique formula is based on a blend of resins and polyurethane, which produced a Best in Class single pack paint for general use. This attractive, hardwearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. Watco Concrete Floor Paint Anti Slip provides a good level of slip resistance and the anti slip particles are pre-blended which makes it easier to achieve a uniform finish. All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this Best Ever Formulation to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. Recommended areas of use Production Areas Warehouses Workshops Features Professional quality, single pack polyurethane coating Transforms and dustproofs drab, stained concrete Ideal for identifying production and storage areas and traffic aisles Easy to use and easy to keep clean Superior performance demonstrated by ISO testing to CE mark EN 1504-2 High Gloss, Matt & Anti Slip versions available Available in 190 RAL colours Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 24 hours 16 hours 48 hours 72 hours 20C 16 hours 10 hours 24 hours 36 hours 30C 16 hours 6 hour 24 hours 36 hours Light Traffic: Foot, trolley, pallet truck, occasional forklift

GBP 139.99
1

6x Watco Concrete Floor Paint Bef Anti Slip Light Grey 5L Agate Grey Cfpaaslgy

6x Watco Concrete Floor Paint Bef Anti Slip Light Grey 5L Agate Grey Cfpaaslgy

Images for illustration purposes only Our unique formula is based on a blend of resins and polyurethane, which produced a Best in Class single pack paint for general use. This attractive, hardwearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. Watco Concrete Floor Paint Anti Slip provides a good level of slip resistance and the anti slip particles are pre-blended which makes it easier to achieve a uniform finish. All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this Best Ever Formulation to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. Recommended areas of use Production Areas Warehouses Workshops Features Professional quality, single pack polyurethane coating Transforms and dustproofs drab, stained concrete Ideal for identifying production and storage areas and traffic aisles Easy to use and easy to keep clean Superior performance demonstrated by ISO testing to CE mark EN 1504-2 High Gloss, Matt & Anti Slip versions available Available in 190 RAL colours Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 24 hours 16 hours 48 hours 72 hours 20C 16 hours 10 hours 24 hours 36 hours 30C 16 hours 6 hour 24 hours 36 hours Light Traffic: Foot, trolley, pallet truck, occasional forklift

GBP 779.94
1

Watco Concrete Floor Paint Bef Matt Mid Grey 5L Dusty Grey Cfpamattmgy

Watco Concrete Floor Paint Bef Matt Mid Grey 5L Dusty Grey Cfpamattmgy

Images for illustration purposes only Our unique formula is based on a blend of resins and polyurethane, which has produced a Best in Class single pack paint for general use. This attractive, hardwearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. Watco Matt Concrete Floor Paint helps to disguise imperfections in older floors and reduce reflection or glare. Its still easy to keep clean and has all the benefits of the high gloss finish. All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this Best Ever Formulation to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. Recommended areas of use Production Areas Warehouses Workshops Features Professional quality, single pack polyurethane coating Transforms and dustproofs drab, stained concrete Ideal for identifying production and storage areas and traffic aisles Easy to use and easy to keep clean Superior performance demonstrated by ISO testing to CE mark EN 1504-2 High Gloss, Matt & Anti Slip versions available New formulations to RAL colour shades Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 24 hours 16 hours 48 hours 72 hours 20C 16 hours 10 hours 24 hours 36 hours 30C 16 hours 6 hour 24 hours 36 hours Light Traffic: Foot, trolley, pallet truck, occasional forklift

GBP 133.99
1

Watco Concrete Floor Paint Bef Anti Slip Mid Grey 5L Dusty Grey

Watco Concrete Floor Paint Bef Anti Slip Mid Grey 5L Dusty Grey

Images for illustration purposes only Our unique formula is based on a blend of resins and polyurethane, which produced a Best in Class single pack paint for general use. This attractive, hardwearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. Watco Concrete Floor Paint Anti Slip provides a good level of slip resistance and the anti slip particles are pre-blended which makes it easier to achieve a uniform finish. All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this Best Ever Formulation to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. Recommended areas of use Production Areas Warehouses Workshops Features Professional quality, single pack polyurethane coating Transforms and dustproofs drab, stained concrete Ideal for identifying production and storage areas and traffic aisles Easy to use and easy to keep clean Superior performance demonstrated by ISO testing to CE mark EN 1504-2 High Gloss, Matt & Anti Slip versions available Available in 190 RAL colours Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 24 hours 16 hours 48 hours 72 hours 20C 16 hours 10 hours 24 hours 36 hours 30C 16 hours 6 hour 24 hours 36 hours Light Traffic: Foot, trolley, pallet truck, occasional forklift

GBP 139.99
1

Watco Concrete Floor Paint Bef Anti Slip Haz Yellow 5L ZincYellow

Watco Concrete Floor Paint Bef Anti Slip Haz Yellow 5L ZincYellow

Images for illustration purposes only Our unique formula is based on a blend of resins and polyurethane, which produced a Best in Class single pack paint for general use. This attractive, hardwearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. Watco Concrete Floor Paint Anti Slip provides a good level of slip resistance and the anti slip particles are pre-blended which makes it easier to achieve a uniform finish. All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this Best Ever Formulation to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. Recommended areas of use Production Areas Warehouses Workshops Features Professional quality, single pack polyurethane coating Transforms and dustproofs drab, stained concrete Ideal for identifying production and storage areas and traffic aisles Easy to use and easy to keep clean Superior performance demonstrated by ISO testing to CE mark EN 1504-2 High Gloss, Matt & Anti Slip versions available Available in 190 RAL colours Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 24 hours 16 hours 48 hours 72 hours 20C 16 hours 10 hours 24 hours 36 hours 30C 16 hours 6 hour 24 hours 36 hours Light Traffic: Foot, trolley, pallet truck, occasional forklift

GBP 139.99
1

6x Watco Concrete Floor Paint Bef Matt Mid Grey 5L Dusty Grey

6x Watco Concrete Floor Paint Bef Matt Mid Grey 5L Dusty Grey

Images for illustration purposes only Our unique formula is based on a blend of resins and polyurethane, which has produced a Best in Class single pack paint for general use. This attractive, hardwearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. Watco Matt Concrete Floor Paint helps to disguise imperfections in older floors and reduce reflection or glare. Its still easy to keep clean and has all the benefits of the high gloss finish. All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this Best Ever Formulation to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. Recommended areas of use Production Areas Warehouses Workshops Features Professional quality, single pack polyurethane coating Transforms and dustproofs drab, stained concrete Ideal for identifying production and storage areas and traffic aisles Easy to use and easy to keep clean Superior performance demonstrated by ISO testing to CE mark EN 1504-2 High Gloss, Matt & Anti Slip versions available New formulations to RAL colour shades Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 24 hours 16 hours 48 hours 72 hours 20C 16 hours 10 hours 24 hours 36 hours 30C 16 hours 6 hour 24 hours 36 hours Light Traffic: Foot, trolley, pallet truck, occasional forklift

GBP 719.94
1