ProfitSpring | B2B PPC Agency

10x EGA Master Cat I 1000V - Cat II 600V Test Leads Egatronik

Cat I 1000V - Cat II 600V Test Leads Egatronik

GBP 229.90

1

Justrite Type I Safety Can 19L - SAF7984

JUSTRITE Type I Safety Can 19L SAF7984

GBP 429.99

1

Justrite 10101Z 1L Type I Safety Can

1ltr Justrite Type I Safety Can For Flammables - 10101Z 117mm x H210mm FM tested and approved, this safety can for flammables has a self-closing leak proof lid, a dual density flame arrestor and an internal pressure relief mechanism to reduce explosion risk.

GBP 189.99

1

Justrite 10001Z 0.5L Type I Safey Can

0.5ltr Justrite Type I Safety Can For Flammables - 10001Z L117 x W194 x H324mm FM tested and approved, this can has a self-closing leak proof lid, a dual density flame arrestor and an internal pressure relief mechanism to reduce explosion risk.

GBP 189.99

1

Justrite 9.5L Type I Safety Can - 14261

9.5ltr Justrite Type I Safety Can For Flammables - 14261 273mm x H362mm Manufactured from high-density polyethylene this safety can features a unique anti-static collar which allows it to be properly earthed when used in conjunction with an earthing wire. A trigger release cap and steel fittings make this a practical and safe storage can for flammables.

GBP 259.99

1

Justrite 14561 19L Type I Safety Can

19ltr Justrite Type I Safety Can For Flammables - 14561 324mm x H406mm Manufactured from high-density polyethylene this safety can features a unique anti-static collar which allows it to be properly earthed when used in conjunction with an earthing wire. A trigger release cap and steel fittings make this a practical and safe storage can for flammables.

GBP 339.99

1

Justrite 4L Poly Type I Safety Can

4ltr Justrite Type I Safety Can For Flammables - 14160Z L117 x W194 x H324mm FM tested and approved, this can has a self-closing lid, a dual density flame arrestor and an internal pressure relief mechanism. This can is ideal when compatibility with steel is an issue as it is resistant to acids corrosives and heat.

GBP 189.99

1

Martindale HPAT600/2 PAT Tester, Class I, Class II Test Type

Martindale HPAT600/2 PAT Tester, Class I, Class II Test Type, Testing Method: Automatic, Manual, Power Source: Battery, Battery Type: AA, Battery Life: 600 (Test), Weight: 700g, Height: 210mm, Length: 90mm, Maximum Operating Temperature: +40°C, Maximum Supply Voltage: 1.2V, Minimum Operating Temperature: -10°C, Width: 54mm

GBP 299.00

3

Martindale HPAT500/2 PAT Tester, Class I, Class II Test Type

Martindale HPAT500/2 PAT Tester, Class I, Class II Test Type, Testing Method: Automatic, Power Source: Battery, Battery Type: AA, Battery Life: 600 (Test), Weight: 700g, Height: 210mm, Length: 90mm, Maximum Operating Temperature: +40°C, Maximum Supply Voltage: 1.2V, Minimum Operating Temperature: -10°C, Width: 54mm

GBP 269.00

2

Martindale HPAT400/2 PAT Tester, Class I, Class II Test Type

Martindale HPAT400/2 PAT Tester, Class I, Class II Test Type, Tester Type: Pass/Fail PAT, Testing Method: Automatic, Power Source: Battery, Battery Type: AA, Battery Life: 600 (Test), Weight: 700g, Height: 210mm, Length: 90mm, Maximum Operating Temperature: +40°C, Minimum Operating Temperature: -10°C, Width: 54mm

GBP 207.00

1

Watco Safety Coat Food Safe Yellow 2.5L

Images for illustration purposes onlyWatco Safety Coat Food Safe uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry.This is an anti slip version of Watco Food Safe CoatingRecommended areas of useFood preparation environmentsCold food storage such as walk-in fridgesAreas where spillages sometimes occur, the finely textured surface is easier to clean than conventional 'gritty' surfacesFeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CSlip resistantExcellent chemical resistanceSteam cleanablePendulum Slip Test ValuesDry PTV Wet PTV65 Low slip potential 45 Low slip potential

GBP 209.99

1

Seaward PrimeTest 250+ UK PAT Tester, Class I Test Type

Seaward PrimeTest 250+ UK PAT Tester, Class I Test Type, Tester Type: Advanced PAT, Testing Method: Automatic, Download: Yes, Power Source: Battery, Battery Type: AA, Maximum Supply Voltage: 254V ac, Minimum Supply Voltage: 225V ac, MPN: 403A954

GBP 437.00

1

Portable Refrigerator | 4AllFamily | Red

The RxCoolers Max is a small, portable refrigerator, this travel refrigerator is built with real-world needs in mind. It uses a dual cooling system combining USB-powered refrigeration with a high-performance cooling pack- ideal for travelling, commuting, or spending time outdoors. USB Power & Cooling Pack Dual Function Digital Temperature Display Chills in Hot Weather Warms in Cold Weather Large Storage Capacity

GBP 217.99

1

Portable Refrigerator | 4AllFamily | Blue Gray

The RxCoolers Max is a small, portable refrigerator. This travel refrigerator is built with real-world needs in mind. It uses a dual cooling system combining USB-powered refrigeration with a high-performance cooling pack- ideal for travelling, commuting, or spending time outdoors. USB Power & Cooling Pack Dual Function Digital Temperature Display Chills in Hot Weather Warms in Cold Weather Large Storage Capacity Tablets & Accessories Room-Temp Box

GBP 217.99

1

Watco Safety Coat Food Safe Tile Red 2.5L

Images for illustration purposes onlyWatco Safety Coat Food Safe uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry.This is an anti slip version of Watco Food Safe CoatingRecommended areas of useFood preparation environmentsCold food storage such as walk-in fridgesAreas where spillages sometimes occur, the finely textured surface is easier to clean than conventional 'gritty' surfacesFeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CSlip resistantExcellent chemical resistanceSteam cleanablePendulum Slip Test ValuesDry PTV Wet PTV65 Low slip potential 45 Low slip potential

GBP 209.99

1

Watco Safety Coat Food Safe Mid Blue, 2.5L

Images for illustration purposes onlyWatco Safety Coat Food Safe uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry.This is an anti slip version of Watco Food Safe CoatingRecommended areas of useFood preparation environmentsCold food storage such as walk-in fridgesAreas where spillages sometimes occur, the finely textured surface is easier to clean than conventional 'gritty' surfacesFeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CSlip resistantExcellent chemical resistanceSteam cleanablePendulum Slip Test ValuesDry PTV Wet PTV65 Low slip potential 45 Low slip potential

GBP 209.99

1

Watco Safety Coat Food Safe Mid Grey, 2.5L

Images for illustration purposes onlyWatco Safety Coat Food Safe uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry.This is an anti slip version of Watco Food Safe CoatingRecommended areas of useFood preparation environmentsCold food storage such as walk-in fridgesAreas where spillages sometimes occur, the finely textured surface is easier to clean than conventional 'gritty' surfacesFeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CSlip resistantExcellent chemical resistanceSteam cleanablePendulum Slip Test ValuesDry PTV Wet PTV65 Low slip potential 45 Low slip potential

GBP 209.99

1

Watco Safety Coat Food Safe Light Grey 2.5L

Images for illustration purposes onlyWatco Safety Coat Food Safe uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry.This is an anti slip version of Watco Food Safe CoatingRecommended areas of useFood preparation environmentsCold food storage such as walk-in fridgesAreas where spillages sometimes occur, the finely textured surface is easier to clean than conventional 'gritty' surfacesFeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CSlip resistantExcellent chemical resistanceSteam cleanablePendulum Slip Test ValuesDry PTV Wet PTV65 Low slip potential 45 Low slip potential

GBP 209.99

1

Watco Food Safe Coating Mid Blue, 2.5L

Images for illustration purposes onlyWatco Food Safe Coating uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It is ideal for normal food preparation environments as well as cold food storage areas such as walk-in fridges. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry. FeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CExcellent chemical resistanceSteam cleanable

GBP 209.99

1

Watco Food Safe Coating Light Grey 2.5L

Images for illustration purposes onlyWatco Food Safe Coating uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It is ideal for normal food preparation environments as well as cold food storage areas such as walk-in fridges. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry. FeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CExcellent chemical resistanceSteam cleanable

GBP 209.99

1

Watco Food Safe Coating Safety Yellow, 2.5L

Images for illustration purposes onlyWatco Food Safe Coating uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It is ideal for normal food preparation environments as well as cold food storage areas such as walk-in fridges. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry. FeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CExcellent chemical resistanceSteam cleanable

GBP 209.99

1

Watco Food Safe Coating Tile Red 2.5L

Images for illustration purposes onlyWatco Food Safe Coating uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It is ideal for normal food preparation environments as well as cold food storage areas such as walk-in fridges. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry. FeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CExcellent chemical resistanceSteam cleanable

GBP 209.99

1

Watco Food Safe Coating Mid Grey 2.5L

Images for illustration purposes onlyWatco Food Safe Coating uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It is ideal for normal food preparation environments as well as cold food storage areas such as walk-in fridges. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry. FeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CExcellent chemical resistanceSteam cleanable

GBP 209.99

1

Brand

Colour

Size

Gender

Merchant

Price (EUR)

10x EGA Master Cat I 1000V - Cat II 600V Test Leads Egatronik

Justrite Type I Safety Can 19L - SAF7984

Justrite 10101Z 1L Type I Safety Can

Justrite 10001Z 0.5L Type I Safey Can

Justrite 9.5L Type I Safety Can - 14261

Justrite 14561 19L Type I Safety Can

Justrite 4L Poly Type I Safety Can

Martindale HPAT600/2 PAT Tester, Class I, Class II Test Type

Martindale HPAT500/2 PAT Tester, Class I, Class II Test Type

Martindale HPAT400/2 PAT Tester, Class I, Class II Test Type

Watco Safety Coat Food Safe Yellow 2.5L

Seaward PrimeTest 250+ UK PAT Tester, Class I Test Type

Portable Refrigerator | 4AllFamily | Red

Portable Refrigerator | 4AllFamily | Blue Gray

Watco Safety Coat Food Safe Tile Red 2.5L

Watco Safety Coat Food Safe Mid Blue, 2.5L

Watco Safety Coat Food Safe Mid Grey, 2.5L

Watco Safety Coat Food Safe Light Grey 2.5L

Watco Food Safe Coating Mid Blue, 2.5L

Watco Food Safe Coating Light Grey 2.5L

Watco Food Safe Coating Safety Yellow, 2.5L

Watco Food Safe Coating Tile Red 2.5L

Watco Food Safe Coating Mid Grey 2.5L

Powered by Cobiro