21 resultat (0,19240 sekunder)

Visa alla filter

Märke

Visa alla

Butik

Pris (EUR)

Nollställ filter

Produkter
Från
Butiker

Just Normlicht LED proofTop Multi 0B

Just Normlicht LED proofTop Multi 0B

unique JUST LED technology, Fogra certified according to ISO 3664:2009, Pat. No. US 8,592,748 B2 switchable: D50 and D65 each with and without UV component for color matching according to the old and new ISO 3664 and ISO 3668 standards continuous dimming and USB interface for softproofing no color shift when dimming no warm-up phase after switching on 20 times the operating hours of fluorescent lamps (> 50,000 h) stable light conditions over the entire operating life no tube replacement necessary extremely uniform, glare and reflection-free illumination due to asymmetrical light guidance and prismatic lenses ISO-compliant illuminance of 2000 lux Color rendering (CRI) Ra ≥ 95 exact color coordinate (10°): D50: x = 0.3478 / y = 0.3595 (≤ 0.002) D65: x = 0.3138 / y = 0.3309 (≤ 0.002) low metamerism index in the visible range: ≤ 0.8 (MIvis) low metamerism index in UV range: ≤ 0.6 (MIuv) Sampling area in neutral, matt grey (Munsell N7)

SEK 28760.00
1

EFI Offset Proof Paper 9140XF Semimatt - 60" x 30 meter

EFI Offset Proof Paper 9140XF Semimatt - 60" x 30 meter

The EFI Offset Proof Paper 9140XF Semimatt is especially developed for offset printing. The very wide colour gamut and the quality covers all the paper type classes. The appearance resemples offset production paper. A very low content of optical brighteners guarantees a high stability for colour management - metamerism effects are minimized. This paper is FOGRA substratecertified as per ISO 12647-7. Key features - Especially developed for offset printing - Suitable for proofing according to FOGRA39 - Very good fading properties (reduced colour fading) - Very wide colour gamut - Surface - Semimatt -Grammage 140

SEK 5946.25
1

EFI Offset Proof Paper 9140XF Semimatt - A1, 100 sheets

EFI Offset Proof Paper 9140XF Semimatt - A1, 100 sheets

The EFI Offset Proof Paper 9140XF Semimatt is especially developed for offset printing. The very wide colour gamut and the quality covers all the paper type classes. The appearance resemples offset production paper. A very low content of optical brighteners guarantees a high stability for colour management - metamerism effects are minimized. This paper is FOGRA substratecertified as per ISO 12647-7. Key features - Especially developed for offset printing - Suitable for proofing according to FOGRA39 - Very good fading properties (reduced colour fading) - Very wide colour gamut - Surface - Semimatt -Grammage 140

SEK 7228.75
1

EFI Offset Proof Paper 9140XF Semimatt - 64" x 30 meter

EFI Offset Proof Paper 9140XF Semimatt - 64" x 30 meter

The EFI Offset Proof Paper 9140XF Semimatt is especially developed for offset printing. The very wide colour gamut and the quality covers all the paper type classes. The appearance resemples offset production paper. A very low content of optical brighteners guarantees a high stability for colour management - metamerism effects are minimized. This paper is FOGRA substratecertified as per ISO 12647-7. Key features - Especially developed for offset printing - Suitable for proofing according to FOGRA39 - Very good fading properties (reduced colour fading) - Very wide colour gamut - Surface - Semimatt -Grammage 140

SEK 6333.75
1

Just Normlicht LED Challenge 6B

Just Normlicht LED Challenge 6B

The economic proofing station for 3B and 6B formats is the entry-level solution for our LED based stations. With the proven JUST LED technology, proofs can be matched under D50 and D65, while the UV component can be switched on and off. The special prismatic lens provides an even, glare and reflection free illumination. unique JUST LED technology, Fogra certified according to ISO 3664:2009, Pat. No. US 8,592,748 B2 switchable: D50 and D65 each with and without UV component for color matching according to the old and new ISO 3664 and ISO 3668 standards continuous dimming and USB interface for softproofing no color shift when dimming no warm-up phase after switching on 20 times the operating hours of fluorescent lamps (> 50,000 h) stable light conditions over the entire operating life no tube replacement necessary extremely uniform, glare and reflection-free illumination due to asymmetrical light guidance and prismatic lenses ISO-compliant illuminance of 2000 lux Color rendering (CRI) Ra ≥ 95 exact color coordinates (10°): D50: x = 0.3478 / y = 0.3595 (≤ 0.002) D65: x = 0.3138 / y = 0.3309 (≤ 0.002) low metamerism index in the visible range: ≤ 0.8 (MIvis) low metamerism index in UV range: ≤ 0.6 (MIuv) Sampling area in neutral, matt grey (Munsell N7)

SEK 88878.75
1

Just Normlicht LED Challenge 3B

Just Normlicht LED Challenge 3B

The economic proofing station for 3B and 6B formats is the entry-level solution for our LED based stations. With the proven JUST LED technology, proofs can be matched under D50 and D65, while the UV component can be switched on and off. The special prismatic lens provides an even, glare and reflection free illumination. unique JUST LED technology, Fogra certified according to ISO 3664:2009, Pat. No. US 8,592,748 B2 switchable: D50 and D65 each with and without UV component for color matching according to the old and new ISO 3664 and ISO 3668 standards continuous dimming and USB interface for softproofing no color shift when dimming no warm-up phase after switching on 20 times the operating hours of fluorescent lamps (> 50,000 h) stable light conditions over the entire operating life no tube replacement necessary extremely uniform, glare and reflection-free illumination due to asymmetrical light guidance and prismatic lenses ISO-compliant illuminance of 2000 lux Color rendering (CRI) Ra ≥ 95 exact color coordinates (10°): D50: x = 0.3478 / y = 0.3595 (≤ 0.002) D65: x = 0.3138 / y = 0.3309 (≤ 0.002) low metamerism index in the visible range: ≤ 0.8 (MIvis) low metamerism index in UV range: ≤ 0.6 (MIuv) Sampling area in neutral, matt grey (Munsell N7)

SEK 76145.00
1

Just Normlicht LED Wall Illumination 1,5m x 1,5m (5’ x 5’)

Just Normlicht LED Wall Illumination 1,5m x 1,5m (5’ x 5’)

LED Wall Illumination is the professional solution for large-area wall illumination with standardised light D50 and D65. For visual colour assessment, simply fix posters, plots or large-format prints on the magnetic rear wall. Thanks to the flexible modular concept of the LED luminaire the color viewing area is customisable to your needs and applications. Just ask us – we are more than willing to help. Optimally suited to wall illumination of large formatsIncluding magnetic rear wall Lamp suspended from the ceiling by wire Unique LED light technology by JUST, Fogra certified to ISO 3664:2009, Pat. No. US 8,592,748 B2 Switchable light: D50 and D65 according to ISO 3664 and ISO 3668 UV content can be enabled or disabled for either illuminant regarding new and old ISO standard Continuously dimming and USB connection for soft proofing applications No colour shifts while dimming No preheating after turning on 20x longer operating life despite to fluorescent lamps (> 50.000 h) Stable light output during the entire lifespan Annual relamping not required Including lamp suspended from the ceiling by wire Colour Rendering Index (CRI) Ra ≥ 95 Exact colour coordinates (10°): D50: x = 0.3478 / y = 0.3595 (≤ 0,002) D65: x = 0.3138 / y = 0.3309 (≤ 0,002) Low metamerism index in the visible range: ≤ 0.8 (MIvis) Low metamerism index in the UV range: ≤ 0.6 (MIuv) external controller "LED Remote Control" (available optionally) (W x H x D: 33 x 12 x 4 cm)

SEK 69630.00
1

Just Normlicht LED Wall Illumination 1,2m x 1,5m (4’ x 5’)

Just Normlicht LED Wall Illumination 1,2m x 1,5m (4’ x 5’)

LED Wall Illumination is the professional solution for large-area wall illumination with standardised light D50 and D65. For visual colour assessment, simply fix posters, plots or large-format prints on the magnetic rear wall. Thanks to the flexible modular concept of the LED luminaire the color viewing area is customisable to your needs and applications. Just ask us – we are more than willing to help. Optimally suited to wall illumination of large formatsIncluding magnetic rear wall Lamp suspended from the ceiling by wire Unique LED light technology by JUST, Fogra certified to ISO 3664:2009, Pat. No. US 8,592,748 B2 Switchable light: D50 and D65 according to ISO 3664 and ISO 3668 UV content can be enabled or disabled for either illuminant regarding new and old ISO standard Continuously dimming and USB connection for soft proofing applications No colour shifts while dimming No preheating after turning on 20x longer operating life despite to fluorescent lamps (> 50.000 h) Stable light output during the entire lifespan Annual relamping not required Including lamp suspended from the ceiling by wire Colour Rendering Index (CRI) Ra ≥ 95 Exact colour coordinates (10°): D50: x = 0.3478 / y = 0.3595 (≤ 0,002) D65: x = 0.3138 / y = 0.3309 (≤ 0,002) Low metamerism index in the visible range: ≤ 0.8 (MIvis) Low metamerism index in the UV range: ≤ 0.6 (MIuv) external controller "LED Remote Control" (available optionally) (W x H x D: 33 x 12 x 4 cm)

SEK 51005.00
1

Datalogic HandScanner

Datalogic HandScanner

The Datalogic HandScanner, with its compact dimensions of only 50 x 45 x 16 mm and low weight of just 40 g, provides more hand freedom in retail, healthcare, manufacturing, transportation and logistics. It is available as a standard range or mid-range model and captures all common 1D/2D barcodes via its integrated megapixel sensor with a clear triple feedback: LED display, acoustic and haptic. The HandScanner is operated via a trigger integrated in a wrist strap. It is available in different sizes and for right- or left-handers. It may be individually adapted to the hand, thanks to the Velcro closure. Further equipment includes the interfaces Bluetooth 4.0, 4.1, 4.2 and 5.0, BLE and a 670 mAh lithium-ion battery. With a battery life of up to 15 hours, the battery lasts for almost two complete shifts and is fully recharged within 2 hours. Plus, the scanner is impact-resistant from up to 2 m and is compatible with various Datalogic mobile computers, as required.

SEK 10308.75
1

Zebra ZT510

Zebra ZT510

Zebra's industrial printer ZT510 is the optimal choice for combining top performance with low costs in production, shipping or warehousing. It comes with all the core features that you expect from an industrial printer for medium to high volumes – without the additional costs for unnecessary equipment. The devices produce labels at up to 305 mm/sec. at a resolution of up to 300 dpi, as you wish in either direct thermal or thermal transfer mode. The ZT510 builds upon the qualities of the predecessor, 105SLPlus, and impresses with its solid construction in connection with 2 GB flash memory and extended management possibilities. Add to this a high degree of reliability and a long life cycle (which reduce interruptions to a minimum), not to mention a 2-year standard warranty. With diverse accessory options you adapt the printer individually and integrate it easily into existing infrastructures, thanks to Link-OS Cloud Connect. With the ZT510 you are well equipped for all the challenges of the coming years.

SEK 27447.50
1

X-Rite eXact 2 Standard

X-Rite eXact 2 Standard

eXact 2 - For paper, corrugated, carton board substrates - Identify exact point of measurement with Mantis™ video targeting - Intuitive design and 30% larger screen make it easy to learn and use - Avoid wet ink contamination with low-contact measurement area Next Generation of Color Measurement Available in three models, eXact 2 reimagines color measurement with enhanced accuracy and speed, unrivaled non-contact video measurement and zoom technology, onboard Wi-Fi, and fleet management powered by X-Rite Link. eXact 2 also helps printers meet print quality program requirements and industry standards. Take Accurate Measurements and Inspect Patches with Video Targeting All eXact 2 models use Mantis video targeting, combined with a high-resolution display that is 30% larger than previous generations, making it easy to find the measurement area. With Digital Loupe, you can quickly zoom to inspect or capture an image to include in your audit trail. A Pressroom Operator's Best Friend "We have stringent reporting needs. This is a device we can use press-side and allow the team to work without leaving their area and give us the kind of reporting we need with a user-friendly interface as well." - Steve Lehning, GR Label Quickly Scan M0, M1, M2, M3 in a Single Measurement The eXact 2 Plus can easily toggle between spot and scan measurements using integrated wheels and patch recognition technology, speeding up measurement by 17%. eXact 2 Plus simultaneously measures M0, UV included/ISO 13655:2017; M1, D50/ISO 13655:2017; M2, UV excluded/ISO 13655:2017; and M3 - Polarization/ISO 13655:2017. A Connected Ink and Print Workflow Quickly collect and visualize your color data to find the information you need when you need it. All eXact 2 models offer on-screen, embedded quality control and quality assurance capabilities and simplified ink workflows. Work faster and more securely anywhere in your facility with onboard WiFi.

SEK 92696.25
1